! Started logfile: J0656-0323_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:09:22 2017 obs J0656-0323_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0656-0323_S_2015_01_23_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.620148 visibilities/baseline/integration-bin. ! Found source: J0656-0323 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 8372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0656-0323_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 181 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.595284Jy sigma=0.005325 ! Fit after self-cal, rms=0.416384Jy sigma=0.002822 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=6.866 mas, bpa=1.007 degrees ! Estimated noise=963.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.611242 Jy ! Component: 100 - total flux cleaned = 0.764754 Jy ! Total flux subtracted in 100 components = 0.764754 Jy ! Clean residual min=-0.040333 max=0.064516 Jy/beam ! Clean residual mean=0.000037 rms=0.012437 Jy/beam ! Combined flux in latest and established models = 0.764754 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.764754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.300736Jy sigma=0.002150 ! Fit after self-cal, rms=0.300707Jy sigma=0.002150 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.48 mas, bpa=2.649 degrees ! Estimated noise=830 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592859 Jy ! Component: 100 - total flux cleaned = 0.0865149 Jy ! Component: 150 - total flux cleaned = 0.100845 Jy ! Component: 200 - total flux cleaned = 0.108672 Jy ! Total flux subtracted in 200 components = 0.108672 Jy ! Clean residual min=-0.037186 max=0.053556 Jy/beam ! Clean residual mean=0.000072 rms=0.012259 Jy/beam ! Combined flux in latest and established models = 0.873427 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.873427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309038Jy sigma=0.001886 ! Fit after self-cal, rms=0.309025Jy sigma=0.001886 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 2.24 HN 0.93 KP 1.03 ! LA 1.17 MK 1.04 NL 0.96 OV 0.92 ! PT 0.93 SC 0.99 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 2.56 HN 0.99 KP 0.97 ! LA 1.14 MK 1.04 NL 1.04 OV 0.95 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 2.79 HN 0.98 KP 0.83 ! LA 0.92 MK 1.07 NL 1.16 OV 0.88 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 2.27 HN 0.95 KP 0.78 ! LA 0.96 MK 1.06 NL 0.98 OV 0.94 ! PT 0.94 SC 0.99 ! ! ! Fit before self-cal, rms=0.309025Jy sigma=0.001886 ! Fit after self-cal, rms=0.320405Jy sigma=0.001327 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=7.519 mas, bpa=2.845 degrees ! Estimated noise=831.367 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00256692 Jy ! Component: 100 - total flux cleaned = -0.00360215 Jy ! Component: 150 - total flux cleaned = -0.00360146 Jy ! Component: 200 - total flux cleaned = -0.00344876 Jy ! Total flux subtracted in 200 components = -0.00344876 Jy ! Clean residual min=-0.028094 max=0.026122 Jy/beam ! Clean residual mean=0.000087 rms=0.008275 Jy/beam ! Combined flux in latest and established models = 0.869978 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 33 components and 0.869978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.320098Jy sigma=0.001322 ! Fit after self-cal, rms=0.320638Jy sigma=0.001321 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.320638Jy sigma=0.001321 ! Fit after self-cal, rms=0.315253Jy sigma=0.000796 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=7.514 mas, bpa=2.719 degrees ! Estimated noise=832.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100066 Jy ! Component: 100 - total flux cleaned = 0.000881779 Jy ! Component: 150 - total flux cleaned = 0.000551199 Jy ! Component: 200 - total flux cleaned = 0.000341707 Jy ! Total flux subtracted in 200 components = 0.000341707 Jy ! Clean residual min=-0.004816 max=0.004487 Jy/beam ! Clean residual mean=0.000007 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.87032 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.87032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315156Jy sigma=0.000793 ! Fit after self-cal, rms=0.315815Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290677 Jy ! Component: 100 - total flux cleaned = -0.000387403 Jy ! Component: 150 - total flux cleaned = -0.000574455 Jy ! Component: 200 - total flux cleaned = -0.000754121 Jy ! Total flux subtracted in 200 components = -0.000754121 Jy ! Clean residual min=-0.004773 max=0.004256 Jy/beam ! Clean residual mean=0.000006 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.869565 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.869565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315759Jy sigma=0.000790 ! Fit after self-cal, rms=0.315760Jy sigma=0.000790 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315760Jy sigma=0.000790 ! Fit after self-cal, rms=0.316329Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.515 mas, bpa=2.681 degrees ! Estimated noise=833.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000800036 Jy ! Component: 100 - total flux cleaned = 0.000532432 Jy ! Component: 150 - total flux cleaned = 0.0005333 Jy ! Component: 200 - total flux cleaned = 0.000449882 Jy ! Total flux subtracted in 200 components = 0.000449882 Jy ! Clean residual min=-0.004636 max=0.004027 Jy/beam ! Clean residual mean=0.000006 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.870015 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.870015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316269Jy sigma=0.000789 ! Fit after self-cal, rms=0.316269Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262257 Jy ! Component: 100 - total flux cleaned = -0.000262778 Jy ! Component: 150 - total flux cleaned = -0.000341691 Jy ! Component: 200 - total flux cleaned = -0.000342581 Jy ! Total flux subtracted in 200 components = -0.000342581 Jy ! Clean residual min=-0.004570 max=0.003899 Jy/beam ! Clean residual mean=0.000006 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.869672 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.869672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316228Jy sigma=0.000787 ! Fit after self-cal, rms=0.316230Jy sigma=0.000787 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316230Jy sigma=0.000787 ! Fit after self-cal, rms=0.316630Jy sigma=0.000787 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.031 mas, bmaj=12.03 mas, bpa=3.602 degrees ! Estimated noise=1099.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00032318 Jy ! Component: 100 - total flux cleaned = -0.000184269 Jy ! Component: 150 - total flux cleaned = -0.000112337 Jy ! Component: 200 - total flux cleaned = -6.50048e-05 Jy ! Total flux subtracted in 200 components = -6.50048e-05 Jy ! Clean residual min=-0.002881 max=0.003087 Jy/beam ! Clean residual mean=0.000014 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.869607 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.869607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316638Jy sigma=0.000787 ! Fit after self-cal, rms=0.316639Jy sigma=0.000787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.15409e-05 Jy ! Component: 100 - total flux cleaned = 5.90617e-05 Jy ! Component: 150 - total flux cleaned = 7.36133e-05 Jy ! Component: 200 - total flux cleaned = 7.43211e-05 Jy ! Total flux subtracted in 200 components = 7.43211e-05 Jy ! Clean residual min=-0.002916 max=0.003076 Jy/beam ! Clean residual mean=0.000014 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.869682 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.869682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316638Jy sigma=0.000787 ! Fit after self-cal, rms=0.316640Jy sigma=0.000787 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=7.515 mas, bpa=2.638 degrees ! Estimated noise=834.568 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.304 x 7.515 at 2.638 degrees (North through East) ! Clean map min=-0.0038909 max=0.78616 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316640Jy sigma=0.000787 ! Fit after self-cal, rms=0.328765Jy sigma=0.000721 ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=7.516 mas, bpa=2.649 degrees ! Estimated noise=834.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114807 Jy ! Component: 100 - total flux cleaned = 0.00114756 Jy ! Component: 150 - total flux cleaned = 0.00100523 Jy ! Component: 200 - total flux cleaned = 0.000936811 Jy ! Total flux subtracted in 200 components = 0.000936811 Jy ! Clean residual min=-0.004042 max=0.003626 Jy/beam ! Clean residual mean=-0.000001 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.870619 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.870619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328714Jy sigma=0.000720 ! Fit after self-cal, rms=0.328716Jy sigma=0.000720 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225381 Jy ! Component: 100 - total flux cleaned = -0.000225023 Jy ! Component: 150 - total flux cleaned = -0.000225108 Jy ! Component: 200 - total flux cleaned = -0.000288527 Jy ! Total flux subtracted in 200 components = -0.000288527 Jy ! Clean residual min=-0.003902 max=0.003503 Jy/beam ! Clean residual mean=-0.000001 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.87033 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 66 components and 0.87033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328684Jy sigma=0.000719 ! Fit after self-cal, rms=0.328687Jy sigma=0.000719 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328687Jy sigma=0.000719 ! Fit after self-cal, rms=0.329108Jy sigma=0.000719 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.876 mas, bmaj=6.907 mas, bpa=1.281 degrees ! Estimated noise=948.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.601134 Jy ! Component: 100 - total flux cleaned = 0.747602 Jy ! Component: 150 - total flux cleaned = 0.812005 Jy ! Component: 200 - total flux cleaned = 0.845303 Jy ! Total flux subtracted in 200 components = 0.845303 Jy ! Clean residual min=-0.008072 max=0.015671 Jy/beam ! Clean residual mean=-0.000002 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 0.845302 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.845302 Jy ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=7.515 mas, bpa=2.591 degrees ! Estimated noise=835.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172974 Jy ! Component: 100 - total flux cleaned = 0.0250981 Jy ! Component: 150 - total flux cleaned = 0.0268498 Jy ! Component: 200 - total flux cleaned = 0.0272278 Jy ! Total flux subtracted in 200 components = 0.0272278 Jy ! Clean residual min=-0.004541 max=0.005218 Jy/beam ! Clean residual mean=-0.000002 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.87253 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.87253 Jy ! Inverting map ! Added new window around map position (2, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000796433 Jy ! Component: 100 - total flux cleaned = 0.000463336 Jy ! Component: 150 - total flux cleaned = 0.000757679 Jy ! Component: 200 - total flux cleaned = 0.00102191 Jy ! Total flux subtracted in 200 components = 0.00102191 Jy ! Clean residual min=-0.003791 max=0.004370 Jy/beam ! Clean residual mean=-0.000002 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.873552 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.873552 Jy ! Inverting map ! Added new window around map position (-2.5, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343024 Jy ! Component: 100 - total flux cleaned = 0.00405575 Jy ! Component: 150 - total flux cleaned = 0.00416493 Jy ! Component: 200 - total flux cleaned = 0.00427372 Jy ! Total flux subtracted in 200 components = 0.00427372 Jy ! Clean residual min=-0.003501 max=0.003528 Jy/beam ! Clean residual mean=0.000001 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.877826 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 0.877826 Jy ! Inverting map ! Added new window around map position (3, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185594 Jy ! Component: 100 - total flux cleaned = 0.00264375 Jy ! Component: 150 - total flux cleaned = 0.00316521 Jy ! Component: 200 - total flux cleaned = 0.00346131 Jy ! Total flux subtracted in 200 components = 0.00346131 Jy ! Clean residual min=-0.003008 max=0.002857 Jy/beam ! Clean residual mean=0.000003 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.881287 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 92 components and 0.881287 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.027 mas, bmaj=12.02 mas, bpa=3.533 degrees ! Estimated noise=1100.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.09358e-05 Jy ! Component: 100 - total flux cleaned = -6.27906e-05 Jy ! Component: 150 - total flux cleaned = -4.13338e-05 Jy ! Component: 200 - total flux cleaned = 3.99543e-05 Jy ! Total flux subtracted in 200 components = 3.99543e-05 Jy ! Clean residual min=-0.002598 max=0.002566 Jy/beam ! Clean residual mean=0.000008 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.881327 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127507 Jy ! Component: 100 - total flux cleaned = 0.000179066 Jy ! Component: 150 - total flux cleaned = 0.000242892 Jy ! Component: 200 - total flux cleaned = 0.000317183 Jy ! Total flux subtracted in 200 components = 0.000317183 Jy ! Clean residual min=-0.002586 max=0.002582 Jy/beam ! Clean residual mean=0.000008 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.881644 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 133 components and 0.881644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.302 mas, bmaj=7.515 mas, bpa=2.591 degrees ! Estimated noise=835.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211851 Jy ! Component: 100 - total flux cleaned = 0.000394921 Jy ! Component: 150 - total flux cleaned = 0.0004825 Jy ! Component: 200 - total flux cleaned = 0.000479905 Jy ! Total flux subtracted in 200 components = 0.000479905 Jy ! Clean residual min=-0.002798 max=0.002697 Jy/beam ! Clean residual mean=0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.882124 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 160 components and 0.882124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.328914Jy sigma=0.000716 ! Fit after self-cal, rms=0.328918Jy sigma=0.000716 wmodel J0656-0323_S_2015_01_23_pus_map.mod ! Writing 160 model components to file: J0656-0323_S_2015_01_23_pus_map.mod wobs J0656-0323_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0656-0323_S_2015_01_23_pus_uvs.fits wwins J0656-0323_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0656-0323_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159988 Jy ! Component: 100 - total flux cleaned = -0.000303967 Jy ! Component: 150 - total flux cleaned = -0.000441792 Jy ! Component: 200 - total flux cleaned = -0.000307997 Jy ! Component: 250 - total flux cleaned = -0.000351457 Jy ! Component: 300 - total flux cleaned = -0.000309549 Jy ! Component: 350 - total flux cleaned = -0.000228075 Jy ! Component: 400 - total flux cleaned = -0.000187858 Jy ! Component: 450 - total flux cleaned = -0.000147821 Jy ! Component: 500 - total flux cleaned = -0.000339545 Jy ! Component: 550 - total flux cleaned = -0.00052744 Jy ! Component: 600 - total flux cleaned = -0.000675608 Jy ! Component: 650 - total flux cleaned = -0.000785635 Jy ! Component: 700 - total flux cleaned = -0.00100174 Jy ! Component: 750 - total flux cleaned = -0.00103711 Jy ! Component: 800 - total flux cleaned = -0.00100264 Jy ! Component: 850 - total flux cleaned = -0.00110663 Jy ! Component: 900 - total flux cleaned = -0.00117445 Jy ! Component: 950 - total flux cleaned = -0.00114113 Jy ! Component: 1000 - total flux cleaned = -0.00127447 Jy ! Component: 1050 - total flux cleaned = -0.00130702 Jy ! Component: 1100 - total flux cleaned = -0.00130717 Jy ! Component: 1150 - total flux cleaned = -0.00143608 Jy ! Component: 1200 - total flux cleaned = -0.00146773 Jy ! Component: 1250 - total flux cleaned = -0.0014992 Jy ! Component: 1300 - total flux cleaned = -0.00143706 Jy ! Component: 1350 - total flux cleaned = -0.00134515 Jy ! Component: 1400 - total flux cleaned = -0.00140619 Jy ! Component: 1450 - total flux cleaned = -0.00137628 Jy ! Component: 1500 - total flux cleaned = -0.00131699 Jy ! Component: 1550 - total flux cleaned = -0.00128733 Jy ! Component: 1600 - total flux cleaned = -0.00119927 Jy ! Component: 1650 - total flux cleaned = -0.00108288 Jy ! Component: 1700 - total flux cleaned = -0.00102533 Jy ! Component: 1750 - total flux cleaned = -0.000882626 Jy ! Component: 1800 - total flux cleaned = -0.000741134 Jy ! Component: 1850 - total flux cleaned = -0.000685239 Jy ! Component: 1900 - total flux cleaned = -0.000601184 Jy ! Component: 1950 - total flux cleaned = -0.000517783 Jy ! Component: 2000 - total flux cleaned = -0.00038052 Jy ! Component: 2050 - total flux cleaned = -0.000298477 Jy ! Component: 2100 - total flux cleaned = -0.000136655 Jy ! Component: 2150 - total flux cleaned = -0.000109718 Jy ! Component: 2200 - total flux cleaned = -3.45078e-06 Jy ! Component: 2250 - total flux cleaned = 0.000128668 Jy ! Component: 2300 - total flux cleaned = 0.000286589 Jy ! Component: 2350 - total flux cleaned = 0.000469258 Jy ! Component: 2400 - total flux cleaned = 0.000598842 Jy ! Component: 2450 - total flux cleaned = 0.000779134 Jy ! Component: 2500 - total flux cleaned = 0.00090732 Jy ! Component: 2550 - total flux cleaned = 0.00106013 Jy ! Component: 2600 - total flux cleaned = 0.00116133 Jy ! Component: 2650 - total flux cleaned = 0.00131234 Jy ! Component: 2700 - total flux cleaned = 0.00156248 Jy ! Component: 2750 - total flux cleaned = 0.00158737 Jy ! Component: 2800 - total flux cleaned = 0.0017602 Jy ! Component: 2850 - total flux cleaned = 0.00180945 Jy ! Component: 2900 - total flux cleaned = 0.00195586 Jy ! Component: 2950 - total flux cleaned = 0.00210139 Jy ! Component: 3000 - total flux cleaned = 0.00219784 Jy ! Component: 3050 - total flux cleaned = 0.00231732 Jy ! Component: 3100 - total flux cleaned = 0.00229339 Jy ! Component: 3150 - total flux cleaned = 0.00250632 Jy ! Component: 3200 - total flux cleaned = 0.00255328 Jy ! Component: 3250 - total flux cleaned = 0.00262342 Jy ! Component: 3300 - total flux cleaned = 0.0027167 Jy ! Component: 3350 - total flux cleaned = 0.00283257 Jy ! Component: 3400 - total flux cleaned = 0.00292435 Jy ! Component: 3450 - total flux cleaned = 0.00301557 Jy ! Component: 3500 - total flux cleaned = 0.00303823 Jy ! Component: 3550 - total flux cleaned = 0.00312864 Jy ! Component: 3600 - total flux cleaned = 0.00315096 Jy ! Component: 3650 - total flux cleaned = 0.00328508 Jy ! Component: 3700 - total flux cleaned = 0.00328493 Jy ! Component: 3750 - total flux cleaned = 0.00344002 Jy ! Component: 3800 - total flux cleaned = 0.00359421 Jy ! Component: 3850 - total flux cleaned = 0.00368174 Jy ! Component: 3900 - total flux cleaned = 0.00372525 Jy ! Component: 3950 - total flux cleaned = 0.00372536 Jy ! Component: 4000 - total flux cleaned = 0.00379014 Jy ! Component: 4050 - total flux cleaned = 0.00385439 Jy ! Total flux subtracted in 4096 components = 0.00394002 Jy ! Clean residual min=-0.001330 max=0.001156 Jy/beam ! Clean residual mean=0.000004 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.886064 Jy keep ! Adding 323 model components to the UV plane model. ! The established model now contains 481 components and 0.886064 Jy ![Exited script file: muppet] wmap "J0656-0323_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 7.515 at 2.591 degrees (North through East) ! Clean map min=-0.0022731 max=0.78807 Jy/beam ! Writing clean map to FITS file: J0656-0323_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.788071 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000390249 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.148559 0.148559 0.297117 0.594235 1.18847 2.37694 4.75388 9.50776 19.0155 38.031 76.0621 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.788 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.302 x 7.515 at 2.591 degrees (North through East) ! Clean map min=-0.0022731 max=0.78807 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0656-0323_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:09:28 2017