! Started logfile: J0655-2416_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:17:52 2016
obs J0655-2416_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0655-2416_S_2014_08_05_pus_uva.fits
! AN table 1: 113 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.769322 visibilities/baseline/integration-bin.
! Found source: J0655-2416
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 15648 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0655-2416_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 141 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.966752Jy  sigma=0.008304
! Fit after  self-cal, rms=0.915246Jy  sigma=0.007901
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.002 mas, bmaj=13.56 mas, bpa=20.55 degrees
! Estimated noise=1153.24 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0617795 Jy
! Component: 100  -  total flux cleaned = 0.0792385 Jy
! Total flux subtracted in 100 components = 0.0792385 Jy
! Clean residual min=-0.006155 max=0.007836 Jy/beam
! Clean residual mean=-0.000022 rms=0.001760 Jy/beam
! Combined flux in latest and established models = 0.0792385 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0792385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155676Jy  sigma=0.000794
! Fit after  self-cal, rms=0.155583Jy  sigma=0.000793
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.871 mas, bmaj=15.19 mas, bpa=18.85 degrees
! Estimated noise=681.648 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137547 Jy
! Component: 100  -  total flux cleaned = 0.0204735 Jy
! Component: 150  -  total flux cleaned = 0.0242144 Jy
! Component: 200  -  total flux cleaned = 0.0254652 Jy
! Total flux subtracted in 200 components = 0.0254652 Jy
! Clean residual min=-0.004083 max=0.004559 Jy/beam
! Clean residual mean=-0.000008 rms=0.001193 Jy/beam
! Combined flux in latest and established models = 0.104704 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 64 components and 0.104704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153226Jy  sigma=0.000781
! Fit after  self-cal, rms=0.153186Jy  sigma=0.000781
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.88     HN        1.06     KP        1.09     
!   LA        1.15     MK        1.00*    NL        0.95     OV        1.00     
!   PT        1.05     SC        1.10     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.19     KP        0.98     
!   LA        1.07     MK        1.00*    NL        0.98     OV        1.02     
!   PT        1.03     SC        1.10     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.14     HN        1.09     KP        0.96     
!   LA        0.83     MK        1.00*    NL        1.02     OV        0.98     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.06     HN        1.12     KP        0.86     
!   LA        0.86     MK        1.00*    NL        1.08     OV        1.03     
!   PT        1.03     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.153186Jy  sigma=0.000781
! Fit after  self-cal, rms=0.155692Jy  sigma=0.000776
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.895 mas, bmaj=15.42 mas, bpa=19.07 degrees
! Estimated noise=696.633 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131998 Jy
! Component: 100  -  total flux cleaned = 0.0011701 Jy
! Component: 150  -  total flux cleaned = 0.00113263 Jy
! Component: 200  -  total flux cleaned = 0.00109764 Jy
! Total flux subtracted in 200 components = 0.00109764 Jy
! Clean residual min=-0.004407 max=0.004289 Jy/beam
! Clean residual mean=-0.000009 rms=0.001124 Jy/beam
! Combined flux in latest and established models = 0.105801 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 82 components and 0.105801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155447Jy  sigma=0.000776
! Fit after  self-cal, rms=0.155445Jy  sigma=0.000775
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155445Jy  sigma=0.000775
! Fit after  self-cal, rms=0.160726Jy  sigma=0.000775
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.892 mas, bmaj=15.45 mas, bpa=19.14 degrees
! Estimated noise=712.781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180741 Jy
! Component: 100  -  total flux cleaned = 0.00162319 Jy
! Component: 150  -  total flux cleaned = 0.00158553 Jy
! Component: 200  -  total flux cleaned = 0.0014869 Jy
! Total flux subtracted in 200 components = 0.0014869 Jy
! Clean residual min=-0.004583 max=0.004522 Jy/beam
! Clean residual mean=-0.000009 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.107288 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 90 components and 0.107288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160487Jy  sigma=0.000775
! Fit after  self-cal, rms=0.160498Jy  sigma=0.000775
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013726 Jy
! Component: 100  -  total flux cleaned = -0.00026102 Jy
! Component: 150  -  total flux cleaned = -0.000319725 Jy
! Component: 200  -  total flux cleaned = -0.000376202 Jy
! Total flux subtracted in 200 components = -0.000376202 Jy
! Clean residual min=-0.004588 max=0.004564 Jy/beam
! Clean residual mean=-0.000010 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 0.106912 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.106912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160444Jy  sigma=0.000775
! Fit after  self-cal, rms=0.160449Jy  sigma=0.000775
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160449Jy  sigma=0.000775
! Fit after  self-cal, rms=0.105687Jy  sigma=0.000764
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.896 mas, bmaj=15.48 mas, bpa=19.05 degrees
! Estimated noise=712.264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113006 Jy
! Component: 100  -  total flux cleaned = -1.63542e-05 Jy
! Component: 150  -  total flux cleaned = -6.78996e-05 Jy
! Component: 200  -  total flux cleaned = -6.83201e-05 Jy
! Total flux subtracted in 200 components = -6.83201e-05 Jy
! Clean residual min=-0.001773 max=0.001950 Jy/beam
! Clean residual mean=-0.000010 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.106844 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 102 components and 0.106844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105668Jy  sigma=0.000764
! Fit after  self-cal, rms=0.105571Jy  sigma=0.000764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.54938e-05 Jy
! Component: 100  -  total flux cleaned = -4.38222e-05 Jy
! Component: 150  -  total flux cleaned = -4.36706e-05 Jy
! Component: 200  -  total flux cleaned = -5.98883e-05 Jy
! Total flux subtracted in 200 components = -5.98883e-05 Jy
! Clean residual min=-0.001820 max=0.001999 Jy/beam
! Clean residual mean=-0.000010 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.106784 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 107 components and 0.106784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105563Jy  sigma=0.000764
! Fit after  self-cal, rms=0.105557Jy  sigma=0.000764
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105557Jy  sigma=0.000764
! Fit after  self-cal, rms=0.105672Jy  sigma=0.000764
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.033 mas, bmaj=21.61 mas, bpa=9.113 degrees
! Estimated noise=790.369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.93259e-05 Jy
! Component: 100  -  total flux cleaned = -6.80908e-06 Jy
! Component: 150  -  total flux cleaned = 2.30482e-06 Jy
! Component: 200  -  total flux cleaned = 2.4807e-05 Jy
! Total flux subtracted in 200 components = 2.4807e-05 Jy
! Clean residual min=-0.001593 max=0.002109 Jy/beam
! Clean residual mean=-0.000014 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.106809 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 113 components and 0.106809 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105668Jy  sigma=0.000764
! Fit after  self-cal, rms=0.105670Jy  sigma=0.000764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.69975e-05 Jy
! Component: 100  -  total flux cleaned = 5.24929e-07 Jy
! Component: 150  -  total flux cleaned = 2.70024e-05 Jy
! Component: 200  -  total flux cleaned = 5.84915e-05 Jy
! Total flux subtracted in 200 components = 5.84915e-05 Jy
! Clean residual min=-0.001596 max=0.002111 Jy/beam
! Clean residual mean=-0.000014 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.106867 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 117 components and 0.106867 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105668Jy  sigma=0.000764
! Fit after  self-cal, rms=0.105665Jy  sigma=0.000764
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=15.51 mas, bpa=19.14 degrees
! Estimated noise=711.085 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.891 x 15.51 at 19.14 degrees (North through East)
! Clean map  min=-0.0017231  max=0.090431 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.997 mas, bmaj=13.84 mas, bpa=20.71 degrees
! Estimated noise=1208.62 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0643641 Jy
! Component: 100  -  total flux cleaned = 0.0835511 Jy
! Component: 150  -  total flux cleaned = 0.0929212 Jy
! Component: 200  -  total flux cleaned = 0.098214 Jy
! Total flux subtracted in 200 components = 0.098214 Jy
! Clean residual min=-0.004678 max=0.004247 Jy/beam
! Clean residual mean=-0.000009 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 0.098214 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 35 model components to the UV plane model.
! The established model now contains 35 components and 0.098214 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=15.51 mas, bpa=19.14 degrees
! Estimated noise=711.085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531787 Jy
! Component: 100  -  total flux cleaned = 0.00787642 Jy
! Component: 150  -  total flux cleaned = 0.00918974 Jy
! Component: 200  -  total flux cleaned = 0.00923145 Jy
! Total flux subtracted in 200 components = 0.00923145 Jy
! Clean residual min=-0.001805 max=0.002012 Jy/beam
! Clean residual mean=-0.000008 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.107445 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 63 components and 0.107445 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.033 mas, bmaj=21.61 mas, bpa=9.113 degrees
! Estimated noise=790.369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363486 Jy
! Component: 100  -  total flux cleaned = 0.000434647 Jy
! Component: 150  -  total flux cleaned = 0.000381039 Jy
! Component: 200  -  total flux cleaned = 0.00031095 Jy
! Total flux subtracted in 200 components = 0.00031095 Jy
! Clean residual min=-0.001567 max=0.002166 Jy/beam
! Clean residual mean=-0.000012 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.107756 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.1018e-05 Jy
! Component: 100  -  total flux cleaned = -9.67744e-05 Jy
! Component: 150  -  total flux cleaned = -0.000131073 Jy
! Component: 200  -  total flux cleaned = -0.000178493 Jy
! Total flux subtracted in 200 components = -0.000178493 Jy
! Clean residual min=-0.001534 max=0.002161 Jy/beam
! Clean residual mean=-0.000013 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.107578 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.107578 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.891 mas, bmaj=15.51 mas, bpa=19.14 degrees
! Estimated noise=711.085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141882 Jy
! Component: 100  -  total flux cleaned = -0.000171328 Jy
! Component: 150  -  total flux cleaned = -0.000197856 Jy
! Component: 200  -  total flux cleaned = -0.000197571 Jy
! Total flux subtracted in 200 components = -0.000197571 Jy
! Clean residual min=-0.001690 max=0.002002 Jy/beam
! Clean residual mean=-0.000008 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.10738 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 83 components and 0.10738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105677Jy  sigma=0.000764
! Fit after  self-cal, rms=0.105660Jy  sigma=0.000764
wmodel J0655-2416_S_2014_08_05_pus_map.mod
! Writing 83 model components to file: J0655-2416_S_2014_08_05_pus_map.mod
wobs J0655-2416_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0655-2416_S_2014_08_05_pus_uvs.fits
wwins J0655-2416_S_2014_08_05_pus_map.win
! wwins: Wrote 1 windows to J0655-2416_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000470563 Jy
! Component: 100  -  total flux cleaned = 0.000532858 Jy
! Component: 150  -  total flux cleaned = 0.000415438 Jy
! Component: 200  -  total flux cleaned = 0.000360063 Jy
! Component: 250  -  total flux cleaned = 0.000222772 Jy
! Component: 300  -  total flux cleaned = -6.88529e-05 Jy
! Component: 350  -  total flux cleaned = -0.000120283 Jy
! Component: 400  -  total flux cleaned = -0.000220849 Jy
! Component: 450  -  total flux cleaned = -0.000221271 Jy
! Component: 500  -  total flux cleaned = -0.000245419 Jy
! Component: 550  -  total flux cleaned = -0.000221925 Jy
! Component: 600  -  total flux cleaned = -0.000290392 Jy
! Component: 650  -  total flux cleaned = -0.000267246 Jy
! Component: 700  -  total flux cleaned = -0.000267042 Jy
! Component: 750  -  total flux cleaned = -0.000267009 Jy
! Component: 800  -  total flux cleaned = -0.00030997 Jy
! Component: 850  -  total flux cleaned = -0.000351882 Jy
! Component: 900  -  total flux cleaned = -0.000309928 Jy
! Component: 950  -  total flux cleaned = -0.000351197 Jy
! Component: 1000  -  total flux cleaned = -0.000411926 Jy
! Component: 1050  -  total flux cleaned = -0.000451861 Jy
! Component: 1100  -  total flux cleaned = -0.000471261 Jy
! Component: 1150  -  total flux cleaned = -0.000510206 Jy
! Component: 1200  -  total flux cleaned = -0.000491125 Jy
! Component: 1250  -  total flux cleaned = -0.000529477 Jy
! Component: 1300  -  total flux cleaned = -0.000604363 Jy
! Component: 1350  -  total flux cleaned = -0.000641379 Jy
! Component: 1400  -  total flux cleaned = -0.000604555 Jy
! Component: 1450  -  total flux cleaned = -0.000604375 Jy
! Component: 1500  -  total flux cleaned = -0.000604565 Jy
! Component: 1550  -  total flux cleaned = -0.000604554 Jy
! Component: 1600  -  total flux cleaned = -0.000604691 Jy
! Component: 1650  -  total flux cleaned = -0.000639205 Jy
! Component: 1700  -  total flux cleaned = -0.000587912 Jy
! Component: 1750  -  total flux cleaned = -0.00065616 Jy
! Component: 1800  -  total flux cleaned = -0.000723482 Jy
! Component: 1850  -  total flux cleaned = -0.000773374 Jy
! Component: 1900  -  total flux cleaned = -0.000789685 Jy
! Component: 1950  -  total flux cleaned = -0.000822503 Jy
! Component: 2000  -  total flux cleaned = -0.000903857 Jy
! Component: 2050  -  total flux cleaned = -0.000936063 Jy
! Component: 2100  -  total flux cleaned = -0.000999866 Jy
! Component: 2150  -  total flux cleaned = -0.00106334 Jy
! Component: 2200  -  total flux cleaned = -0.00114192 Jy
! Component: 2250  -  total flux cleaned = -0.00114212 Jy
! Component: 2300  -  total flux cleaned = -0.00125003 Jy
! Component: 2350  -  total flux cleaned = -0.00129594 Jy
! Component: 2400  -  total flux cleaned = -0.00134137 Jy
! Component: 2450  -  total flux cleaned = -0.00134147 Jy
! Component: 2500  -  total flux cleaned = -0.00138642 Jy
! Component: 2550  -  total flux cleaned = -0.00141615 Jy
! Component: 2600  -  total flux cleaned = -0.00148969 Jy
! Component: 2650  -  total flux cleaned = -0.00147513 Jy
! Component: 2700  -  total flux cleaned = -0.00143155 Jy
! Component: 2750  -  total flux cleaned = -0.00148897 Jy
! Component: 2800  -  total flux cleaned = -0.00147459 Jy
! Component: 2850  -  total flux cleaned = -0.00154515 Jy
! Component: 2900  -  total flux cleaned = -0.00148879 Jy
! Component: 2950  -  total flux cleaned = -0.00150269 Jy
! Component: 3000  -  total flux cleaned = -0.00153049 Jy
! Component: 3050  -  total flux cleaned = -0.00154411 Jy
! Component: 3100  -  total flux cleaned = -0.00150304 Jy
! Component: 3150  -  total flux cleaned = -0.00157081 Jy
! Component: 3200  -  total flux cleaned = -0.00151678 Jy
! Component: 3250  -  total flux cleaned = -0.00154347 Jy
! Component: 3300  -  total flux cleaned = -0.0015832 Jy
! Component: 3350  -  total flux cleaned = -0.00151724 Jy
! Component: 3400  -  total flux cleaned = -0.00158274 Jy
! Component: 3450  -  total flux cleaned = -0.00163473 Jy
! Component: 3500  -  total flux cleaned = -0.00162166 Jy
! Component: 3550  -  total flux cleaned = -0.00167301 Jy
! Component: 3600  -  total flux cleaned = -0.00164751 Jy
! Component: 3650  -  total flux cleaned = -0.00160946 Jy
! Component: 3700  -  total flux cleaned = -0.00164728 Jy
! Component: 3750  -  total flux cleaned = -0.00165979 Jy
! Component: 3800  -  total flux cleaned = -0.00173429 Jy
! Component: 3850  -  total flux cleaned = -0.00170955 Jy
! Component: 3900  -  total flux cleaned = -0.00167265 Jy
! Component: 3950  -  total flux cleaned = -0.00164834 Jy
! Component: 4000  -  total flux cleaned = -0.00166052 Jy
! Component: 4050  -  total flux cleaned = -0.00163639 Jy
! Total flux subtracted in 4096 components = -0.00168437 Jy
! Clean residual min=-0.000624 max=0.000767 Jy/beam
! Clean residual mean=-0.000003 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.105696 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 389 components and 0.105696 Jy
![Exited script file: muppet]
wmap "J0655-2416_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.891 x 15.51 at 19.14 degrees (North through East)
! Clean map  min=-0.001407  max=0.090456 Jy/beam
! Writing clean map to FITS file: J0655-2416_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0904557 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00023807 
device "J0655-2416_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0655-2416_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.78957 0.78957 1.57914 3.15828 6.31656 12.6331 25.2663 50.5325
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.09 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.891 x 15.51 at 19.14 degrees (North through East)
! Clean map  min=-0.001407  max=0.090456 Jy/beam
quit
! Quitting program
! Log file J0655-2416_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:17:58 2016