! Started logfile: J0653-0625_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:09:17 2017 obs J0653-0625_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0653-0625_S_2015_01_23_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.793039 visibilities/baseline/integration-bin. ! Found source: J0653-0625 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 11848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0653-0625_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.761345Jy sigma=0.007346 ! Fit after self-cal, rms=0.708610Jy sigma=0.006835 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=6.81 mas, bpa=2.531 degrees ! Estimated noise=897.137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.265493 Jy ! Component: 100 - total flux cleaned = 0.334574 Jy ! Total flux subtracted in 100 components = 0.334574 Jy ! Clean residual min=-0.020372 max=0.030031 Jy/beam ! Clean residual mean=0.000006 rms=0.005580 Jy/beam ! Combined flux in latest and established models = 0.334574 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.334574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219680Jy sigma=0.001215 ! Fit after self-cal, rms=0.219578Jy sigma=0.001214 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=7.734 mas, bpa=2.318 degrees ! Estimated noise=693.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207372 Jy ! Component: 100 - total flux cleaned = 0.0212448 Jy ! Component: 150 - total flux cleaned = 0.0200316 Jy ! Component: 200 - total flux cleaned = 0.0195482 Jy ! Total flux subtracted in 200 components = 0.0195482 Jy ! Clean residual min=-0.019997 max=0.025003 Jy/beam ! Clean residual mean=0.000005 rms=0.005593 Jy/beam ! Combined flux in latest and established models = 0.354122 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 21 components and 0.354122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218486Jy sigma=0.001174 ! Fit after self-cal, rms=0.218455Jy sigma=0.001174 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 2.00 HN 0.90 KP 0.98 ! LA 1.45 MK 1.00 NL 1.12 OV 0.86 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.81 HN 0.96 KP 0.91 ! LA 1.40 MK 1.00 NL 1.24 OV 0.89 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 2.03 HN 0.95 KP 0.78 ! LA 1.12 MK 1.04 NL 1.46 OV 0.83 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.57 HN 0.92 KP 0.74 ! LA 1.19 MK 1.02 NL 0.93 OV 0.88 ! PT 0.89 SC 1.00 ! ! ! Fit before self-cal, rms=0.218455Jy sigma=0.001174 ! Fit after self-cal, rms=0.383790Jy sigma=0.000878 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=7.754 mas, bpa=2.269 degrees ! Estimated noise=695.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00542204 Jy ! Component: 100 - total flux cleaned = 0.00836264 Jy ! Component: 150 - total flux cleaned = 0.0100077 Jy ! Component: 200 - total flux cleaned = 0.0102344 Jy ! Total flux subtracted in 200 components = 0.0102344 Jy ! Clean residual min=-0.012309 max=0.009950 Jy/beam ! Clean residual mean=0.000005 rms=0.002799 Jy/beam ! Combined flux in latest and established models = 0.364356 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.364356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383338Jy sigma=0.000877 ! Fit after self-cal, rms=0.384114Jy sigma=0.000876 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384114Jy sigma=0.000876 ! Fit after self-cal, rms=0.434524Jy sigma=0.000797 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=7.747 mas, bpa=2.294 degrees ! Estimated noise=699.775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401946 Jy ! Component: 100 - total flux cleaned = 0.00630139 Jy ! Component: 150 - total flux cleaned = 0.00709586 Jy ! Component: 200 - total flux cleaned = 0.00743556 Jy ! Total flux subtracted in 200 components = 0.00743556 Jy ! Clean residual min=-0.003759 max=0.006862 Jy/beam ! Clean residual mean=-0.000023 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.371792 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.371792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434332Jy sigma=0.000795 ! Fit after self-cal, rms=0.434473Jy sigma=0.000795 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573968 Jy ! Component: 100 - total flux cleaned = 0.00845581 Jy ! Component: 150 - total flux cleaned = 0.00993775 Jy ! Component: 200 - total flux cleaned = 0.0102796 Jy ! Total flux subtracted in 200 components = 0.0102796 Jy ! Clean residual min=-0.003363 max=0.003623 Jy/beam ! Clean residual mean=-0.000018 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.382071 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 80 components and 0.382071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434266Jy sigma=0.000791 ! Fit after self-cal, rms=0.434271Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434271Jy sigma=0.000791 ! Fit after self-cal, rms=0.441378Jy sigma=0.000790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=7.734 mas, bpa=2.271 degrees ! Estimated noise=703.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267233 Jy ! Component: 100 - total flux cleaned = 0.00445386 Jy ! Component: 150 - total flux cleaned = 0.00562365 Jy ! Component: 200 - total flux cleaned = 0.00601918 Jy ! Total flux subtracted in 200 components = 0.00601918 Jy ! Clean residual min=-0.002981 max=0.003142 Jy/beam ! Clean residual mean=-0.000014 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.38809 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.38809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441165Jy sigma=0.000789 ! Fit after self-cal, rms=0.441166Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712585 Jy ! Component: 100 - total flux cleaned = 0.000997226 Jy ! Component: 150 - total flux cleaned = 0.00110362 Jy ! Component: 200 - total flux cleaned = 0.0012637 Jy ! Total flux subtracted in 200 components = 0.0012637 Jy ! Clean residual min=-0.003126 max=0.003173 Jy/beam ! Clean residual mean=-0.000014 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.389354 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 105 components and 0.389354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441113Jy sigma=0.000789 ! Fit after self-cal, rms=0.441111Jy sigma=0.000789 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.441111Jy sigma=0.000789 ! Fit after self-cal, rms=0.445747Jy sigma=0.000789 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.952 mas, bmaj=12.49 mas, bpa=2.969 degrees ! Estimated noise=951.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316491 Jy ! Component: 100 - total flux cleaned = 0.00469932 Jy ! Component: 150 - total flux cleaned = 0.00569506 Jy ! Component: 200 - total flux cleaned = 0.00581909 Jy ! Total flux subtracted in 200 components = 0.00581909 Jy ! Clean residual min=-0.004350 max=0.004076 Jy/beam ! Clean residual mean=-0.000023 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.395173 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 128 components and 0.395173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.445559Jy sigma=0.000789 ! Fit after self-cal, rms=0.445556Jy sigma=0.000789 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037806 Jy ! Component: 100 - total flux cleaned = 0.000464277 Jy ! Component: 150 - total flux cleaned = 0.000541495 Jy ! Component: 200 - total flux cleaned = 0.000517807 Jy ! Total flux subtracted in 200 components = 0.000517807 Jy ! Clean residual min=-0.004373 max=0.004057 Jy/beam ! Clean residual mean=-0.000023 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.395691 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 139 components and 0.395691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.445524Jy sigma=0.000789 ! Fit after self-cal, rms=0.445522Jy sigma=0.000789 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.724 mas, bpa=2.265 degrees ! Estimated noise=707.294 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.242 x 7.724 at 2.265 degrees (North through East) ! Clean map min=-0.0030446 max=0.33659 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=6.867 mas, bpa=2.589 degrees ! Estimated noise=890.668 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263331 Jy ! Component: 100 - total flux cleaned = 0.332273 Jy ! Component: 150 - total flux cleaned = 0.358649 Jy ! Component: 200 - total flux cleaned = 0.369702 Jy ! Total flux subtracted in 200 components = 0.369702 Jy ! Clean residual min=-0.004385 max=0.005831 Jy/beam ! Clean residual mean=-0.000020 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.369702 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.369702 Jy ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.724 mas, bpa=2.265 degrees ! Estimated noise=707.294 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00787087 Jy ! Component: 100 - total flux cleaned = 0.0130147 Jy ! Component: 150 - total flux cleaned = 0.0168101 Jy ! Component: 200 - total flux cleaned = 0.0189268 Jy ! Total flux subtracted in 200 components = 0.0189268 Jy ! Clean residual min=-0.002878 max=0.003753 Jy/beam ! Clean residual mean=-0.000015 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.388629 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 51 components and 0.388629 Jy ! Inverting map ! Added new window around map position (-5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235395 Jy ! Component: 100 - total flux cleaned = 0.00326072 Jy ! Component: 150 - total flux cleaned = 0.00396085 Jy ! Component: 200 - total flux cleaned = 0.00457119 Jy ! Total flux subtracted in 200 components = 0.00457119 Jy ! Clean residual min=-0.002960 max=0.002934 Jy/beam ! Clean residual mean=-0.000012 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.3932 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 73 components and 0.3932 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.952 mas, bmaj=12.49 mas, bpa=2.969 degrees ! Estimated noise=951.971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168566 Jy ! Component: 100 - total flux cleaned = 0.00222132 Jy ! Component: 150 - total flux cleaned = 0.00233474 Jy ! Component: 200 - total flux cleaned = 0.00240219 Jy ! Total flux subtracted in 200 components = 0.00240219 Jy ! Clean residual min=-0.004256 max=0.004033 Jy/beam ! Clean residual mean=-0.000022 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.395602 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18789e-06 Jy ! Component: 100 - total flux cleaned = -1.18539e-06 Jy ! Component: 150 - total flux cleaned = -6.20882e-07 Jy ! Component: 200 - total flux cleaned = 2.47873e-05 Jy ! Total flux subtracted in 200 components = 2.47873e-05 Jy ! Clean residual min=-0.004318 max=0.003991 Jy/beam ! Clean residual mean=-0.000022 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.395627 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 120 components and 0.395627 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.724 mas, bpa=2.265 degrees ! Estimated noise=707.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00062223 Jy ! Component: 100 - total flux cleaned = -0.000752047 Jy ! Component: 150 - total flux cleaned = -0.0007123 Jy ! Component: 200 - total flux cleaned = -0.000601395 Jy ! Total flux subtracted in 200 components = -0.000601395 Jy ! Clean residual min=-0.003025 max=0.002821 Jy/beam ! Clean residual mean=-0.000011 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.395026 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 143 components and 0.395026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.445467Jy sigma=0.000788 ! Fit after self-cal, rms=0.445460Jy sigma=0.000788 wmodel J0653-0625_S_2015_01_23_pus_map.mod ! Writing 143 model components to file: J0653-0625_S_2015_01_23_pus_map.mod wobs J0653-0625_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0653-0625_S_2015_01_23_pus_uvs.fits wwins J0653-0625_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0653-0625_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103977 Jy ! Component: 100 - total flux cleaned = -0.00174552 Jy ! Component: 150 - total flux cleaned = -0.00203364 Jy ! Component: 200 - total flux cleaned = -0.00226475 Jy ! Component: 250 - total flux cleaned = -0.00248779 Jy ! Component: 300 - total flux cleaned = -0.00266127 Jy ! Component: 350 - total flux cleaned = -0.00274502 Jy ! Component: 400 - total flux cleaned = -0.00286946 Jy ! Component: 450 - total flux cleaned = -0.00295082 Jy ! Component: 500 - total flux cleaned = -0.00306983 Jy ! Component: 550 - total flux cleaned = -0.00306991 Jy ! Component: 600 - total flux cleaned = -0.0032628 Jy ! Component: 650 - total flux cleaned = -0.00345224 Jy ! Component: 700 - total flux cleaned = -0.00356385 Jy ! Component: 750 - total flux cleaned = -0.00363758 Jy ! Component: 800 - total flux cleaned = -0.00374684 Jy ! Component: 850 - total flux cleaned = -0.00385497 Jy ! Component: 900 - total flux cleaned = -0.00385504 Jy ! Component: 950 - total flux cleaned = -0.00396126 Jy ! Component: 1000 - total flux cleaned = -0.00399613 Jy ! Component: 1050 - total flux cleaned = -0.00409993 Jy ! Component: 1100 - total flux cleaned = -0.00406557 Jy ! Component: 1150 - total flux cleaned = -0.00420153 Jy ! Component: 1200 - total flux cleaned = -0.00416787 Jy ! Component: 1250 - total flux cleaned = -0.00420172 Jy ! Component: 1300 - total flux cleaned = -0.00430109 Jy ! Component: 1350 - total flux cleaned = -0.00436626 Jy ! Component: 1400 - total flux cleaned = -0.00433369 Jy ! Component: 1450 - total flux cleaned = -0.00436578 Jy ! Component: 1500 - total flux cleaned = -0.00426994 Jy ! Component: 1550 - total flux cleaned = -0.00426999 Jy ! Component: 1600 - total flux cleaned = -0.00430132 Jy ! Component: 1650 - total flux cleaned = -0.00423875 Jy ! Component: 1700 - total flux cleaned = -0.00417696 Jy ! Component: 1750 - total flux cleaned = -0.00414634 Jy ! Component: 1800 - total flux cleaned = -0.0040555 Jy ! Component: 1850 - total flux cleaned = -0.00405558 Jy ! Component: 1900 - total flux cleaned = -0.00399551 Jy ! Component: 1950 - total flux cleaned = -0.00399564 Jy ! Component: 2000 - total flux cleaned = -0.0039365 Jy ! Component: 2050 - total flux cleaned = -0.00390723 Jy ! Component: 2100 - total flux cleaned = -0.00381967 Jy ! Component: 2150 - total flux cleaned = -0.00379083 Jy ! Component: 2200 - total flux cleaned = -0.00390607 Jy ! Component: 2250 - total flux cleaned = -0.00387725 Jy ! Component: 2300 - total flux cleaned = -0.00387754 Jy ! Component: 2350 - total flux cleaned = -0.00393433 Jy ! Component: 2400 - total flux cleaned = -0.0039625 Jy ! Component: 2450 - total flux cleaned = -0.00399059 Jy ! Component: 2500 - total flux cleaned = -0.00399053 Jy ! Component: 2550 - total flux cleaned = -0.00401838 Jy ! Component: 2600 - total flux cleaned = -0.00404607 Jy ! Component: 2650 - total flux cleaned = -0.00410105 Jy ! Component: 2700 - total flux cleaned = -0.00415584 Jy ! Component: 2750 - total flux cleaned = -0.00412856 Jy ! Component: 2800 - total flux cleaned = -0.0040742 Jy ! Component: 2850 - total flux cleaned = -0.00410127 Jy ! Component: 2900 - total flux cleaned = -0.00418194 Jy ! Component: 2950 - total flux cleaned = -0.00418207 Jy ! Component: 3000 - total flux cleaned = -0.00423529 Jy ! Component: 3050 - total flux cleaned = -0.00426175 Jy ! Component: 3100 - total flux cleaned = -0.00426167 Jy ! Component: 3150 - total flux cleaned = -0.00426168 Jy ! Component: 3200 - total flux cleaned = -0.00431396 Jy ! Component: 3250 - total flux cleaned = -0.00431404 Jy ! Component: 3300 - total flux cleaned = -0.00433995 Jy ! Component: 3350 - total flux cleaned = -0.00439169 Jy ! Component: 3400 - total flux cleaned = -0.00439166 Jy ! Component: 3450 - total flux cleaned = -0.00444294 Jy ! Component: 3500 - total flux cleaned = -0.00441747 Jy ! Component: 3550 - total flux cleaned = -0.00451919 Jy ! Component: 3600 - total flux cleaned = -0.00449389 Jy ! Component: 3650 - total flux cleaned = -0.00456947 Jy ! Component: 3700 - total flux cleaned = -0.00459463 Jy ! Component: 3750 - total flux cleaned = -0.00459473 Jy ! Component: 3800 - total flux cleaned = -0.00461963 Jy ! Component: 3850 - total flux cleaned = -0.00471913 Jy ! Component: 3900 - total flux cleaned = -0.00469435 Jy ! Component: 3950 - total flux cleaned = -0.00471903 Jy ! Component: 4000 - total flux cleaned = -0.00471907 Jy ! Component: 4050 - total flux cleaned = -0.00476794 Jy ! Total flux subtracted in 4096 components = -0.00484108 Jy ! Clean residual min=-0.001254 max=0.001350 Jy/beam ! Clean residual mean=-0.000007 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.390185 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 469 components and 0.390185 Jy ![Exited script file: muppet] wmap "J0653-0625_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.242 x 7.724 at 2.265 degrees (North through East) ! Clean map min=-0.0030368 max=0.33703 Jy/beam ! Writing clean map to FITS file: J0653-0625_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.337026 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000485696 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.432337 0.432337 0.864674 1.72935 3.4587 6.91739 13.8348 27.6696 55.3391 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.337 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.242 x 7.724 at 2.265 degrees (North through East) ! Clean map min=-0.0030368 max=0.33703 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0653-0625_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:09:22 2017