! Started logfile: J0653+0508_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:30 2017 obs J0653+0508_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0653+0508_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.499288 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0653+0508 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8412 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0653+0508_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980295Jy sigma=0.014308 ! Fit after self-cal, rms=0.951068Jy sigma=0.013887 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=5.801 mas, bpa=-5.818 degrees ! Estimated noise=819.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386373 Jy ! Component: 100 - total flux cleaned = 0.0498412 Jy ! Total flux subtracted in 100 components = 0.0498412 Jy ! Clean residual min=-0.005753 max=0.005587 Jy/beam ! Clean residual mean=0.000002 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.0498412 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0498412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069036Jy sigma=0.000896 ! Fit after self-cal, rms=0.068744Jy sigma=0.000892 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=6.597 mas, bpa=-4.749 degrees ! Estimated noise=551.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836696 Jy ! Component: 100 - total flux cleaned = 0.0122784 Jy ! Component: 150 - total flux cleaned = 0.0145119 Jy ! Component: 200 - total flux cleaned = 0.0151382 Jy ! Total flux subtracted in 200 components = 0.0151382 Jy ! Clean residual min=-0.003933 max=0.003804 Jy/beam ! Clean residual mean=0.000003 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0649794 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0649794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067912Jy sigma=0.000874 ! Fit after self-cal, rms=0.068040Jy sigma=0.000873 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.91 KP 1.00* LA 1.04 ! MK 1.04 NL 1.12 OV 0.96 PT 1.01 ! SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.24 KP 1.00* LA 1.05 ! MK 1.05 NL 1.14 OV 1.08 PT 1.00 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.16 KP 1.00* LA 0.83 ! MK 1.07 NL 1.02 OV 0.99 PT 1.02 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.08 KP 1.00* LA 0.88 ! MK 0.91 NL 1.24 OV 1.03 PT 1.05 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.068040Jy sigma=0.000873 ! Fit after self-cal, rms=0.070251Jy sigma=0.000867 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=6.46 mas, bpa=-3.504 degrees ! Estimated noise=547.818 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105247 Jy ! Component: 100 - total flux cleaned = 0.00124507 Jy ! Component: 150 - total flux cleaned = 0.00142435 Jy ! Component: 200 - total flux cleaned = 0.00162646 Jy ! Total flux subtracted in 200 components = 0.00162646 Jy ! Clean residual min=-0.002431 max=0.002630 Jy/beam ! Clean residual mean=0.000005 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0666058 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 0.0666059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070198Jy sigma=0.000866 ! Fit after self-cal, rms=0.071074Jy sigma=0.000865 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071074Jy sigma=0.000865 ! Fit after self-cal, rms=0.072754Jy sigma=0.000863 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.79 mas, bmaj=6.393 mas, bpa=-2.858 degrees ! Estimated noise=553.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947366 Jy ! Component: 100 - total flux cleaned = 0.00123341 Jy ! Component: 150 - total flux cleaned = 0.0014564 Jy ! Component: 200 - total flux cleaned = 0.00163044 Jy ! Total flux subtracted in 200 components = 0.00163044 Jy ! Clean residual min=-0.002138 max=0.002560 Jy/beam ! Clean residual mean=0.000005 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.0682363 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.0682363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072699Jy sigma=0.000863 ! Fit after self-cal, rms=0.073194Jy sigma=0.000862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000818845 Jy ! Component: 100 - total flux cleaned = 0.00061516 Jy ! Component: 150 - total flux cleaned = 0.000710462 Jy ! Component: 200 - total flux cleaned = 0.000872423 Jy ! Total flux subtracted in 200 components = 0.000872423 Jy ! Clean residual min=-0.002073 max=0.002302 Jy/beam ! Clean residual mean=0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0691087 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.0691087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073063Jy sigma=0.000860 ! Fit after self-cal, rms=0.073347Jy sigma=0.000860 ! Inverting map ! Added new window around map position (13, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204117 Jy ! Component: 100 - total flux cleaned = 0.00251852 Jy ! Component: 150 - total flux cleaned = 0.00301712 Jy ! Component: 200 - total flux cleaned = 0.00357384 Jy ! Total flux subtracted in 200 components = 0.00357384 Jy ! Clean residual min=-0.002025 max=0.001883 Jy/beam ! Clean residual mean=0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0726825 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 82 components and 0.0726825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073222Jy sigma=0.000858 ! Fit after self-cal, rms=0.073363Jy sigma=0.000858 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073363Jy sigma=0.000858 ! Fit after self-cal, rms=0.074425Jy sigma=0.000857 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.799 mas, bmaj=6.399 mas, bpa=-2.088 degrees ! Estimated noise=559.515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136496 Jy ! Component: 100 - total flux cleaned = 0.00206452 Jy ! Component: 150 - total flux cleaned = 0.00273574 Jy ! Component: 200 - total flux cleaned = 0.00319359 Jy ! Total flux subtracted in 200 components = 0.00319359 Jy ! Clean residual min=-0.001903 max=0.001835 Jy/beam ! Clean residual mean=0.000003 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0758761 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 95 components and 0.0758761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074359Jy sigma=0.000857 ! Fit after self-cal, rms=0.074473Jy sigma=0.000856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624653 Jy ! Component: 100 - total flux cleaned = 0.000851375 Jy ! Component: 150 - total flux cleaned = 0.00112529 Jy ! Component: 200 - total flux cleaned = 0.00140895 Jy ! Total flux subtracted in 200 components = 0.00140895 Jy ! Clean residual min=-0.001860 max=0.001820 Jy/beam ! Clean residual mean=0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0772851 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.0772851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074428Jy sigma=0.000856 ! Fit after self-cal, rms=0.074494Jy sigma=0.000856 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074494Jy sigma=0.000856 ! Fit after self-cal, rms=0.075054Jy sigma=0.000856 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=10.18 mas, bpa=9.16 degrees ! Estimated noise=671.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118787 Jy ! Component: 100 - total flux cleaned = 0.00208815 Jy ! Component: 150 - total flux cleaned = 0.00284957 Jy ! Component: 200 - total flux cleaned = 0.00350235 Jy ! Total flux subtracted in 200 components = 0.00350235 Jy ! Clean residual min=-0.002016 max=0.001842 Jy/beam ! Clean residual mean=0.000004 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0807874 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 116 components and 0.0807874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075036Jy sigma=0.000856 ! Fit after self-cal, rms=0.074992Jy sigma=0.000856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693996 Jy ! Component: 100 - total flux cleaned = 0.00109015 Jy ! Component: 150 - total flux cleaned = 0.00142474 Jy ! Component: 200 - total flux cleaned = 0.00174943 Jy ! Total flux subtracted in 200 components = 0.00174943 Jy ! Clean residual min=-0.001966 max=0.001819 Jy/beam ! Clean residual mean=0.000004 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0825369 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 121 components and 0.0825368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074982Jy sigma=0.000856 ! Fit after self-cal, rms=0.074946Jy sigma=0.000855 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=6.406 mas, bpa=-1.688 degrees ! Estimated noise=563.515 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.805 x 6.406 at -1.688 degrees (North through East) ! Clean map min=-0.0031513 max=0.049601 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=5.611 mas, bpa=-2.758 degrees ! Estimated noise=845.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373116 Jy ! Component: 100 - total flux cleaned = 0.0471362 Jy ! Component: 150 - total flux cleaned = 0.0508188 Jy ! Component: 200 - total flux cleaned = 0.0548579 Jy ! Total flux subtracted in 200 components = 0.0548579 Jy ! Clean residual min=-0.004649 max=0.004477 Jy/beam ! Clean residual mean=0.000005 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.0548579 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0548579 Jy ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=6.406 mas, bpa=-1.688 degrees ! Estimated noise=563.515 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059927 Jy ! Component: 100 - total flux cleaned = 0.0100368 Jy ! Component: 150 - total flux cleaned = 0.0131079 Jy ! Component: 200 - total flux cleaned = 0.0155327 Jy ! Total flux subtracted in 200 components = 0.0155327 Jy ! Clean residual min=-0.002405 max=0.002486 Jy/beam ! Clean residual mean=0.000005 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0703906 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 47 components and 0.0703906 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.86 mas, bmaj=10.18 mas, bpa=9.16 degrees ! Estimated noise=671.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268552 Jy ! Component: 100 - total flux cleaned = 0.00459263 Jy ! Component: 150 - total flux cleaned = 0.00618456 Jy ! Component: 200 - total flux cleaned = 0.00752718 Jy ! Total flux subtracted in 200 components = 0.00752718 Jy ! Clean residual min=-0.002225 max=0.002015 Jy/beam ! Clean residual mean=0.000006 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0779178 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114194 Jy ! Component: 100 - total flux cleaned = 0.00211601 Jy ! Component: 150 - total flux cleaned = 0.00295176 Jy ! Component: 200 - total flux cleaned = 0.0036722 Jy ! Total flux subtracted in 200 components = 0.0036722 Jy ! Clean residual min=-0.002079 max=0.001949 Jy/beam ! Clean residual mean=0.000005 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.08159 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 100 components and 0.08159 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=6.406 mas, bpa=-1.688 degrees ! Estimated noise=563.515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161809 Jy ! Component: 100 - total flux cleaned = 0.000342138 Jy ! Component: 150 - total flux cleaned = 0.000534137 Jy ! Component: 200 - total flux cleaned = 0.000567262 Jy ! Total flux subtracted in 200 components = 0.000567262 Jy ! Clean residual min=-0.001831 max=0.001920 Jy/beam ! Clean residual mean=0.000002 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0821573 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.0821573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074954Jy sigma=0.000856 ! Fit after self-cal, rms=0.075061Jy sigma=0.000856 wmodel J0653+0508_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J0653+0508_S_2014_01_04_pus_map.mod wobs J0653+0508_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0653+0508_S_2014_01_04_pus_uvs.fits wwins J0653+0508_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0653+0508_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000187306 Jy ! Component: 100 - total flux cleaned = -0.000547114 Jy ! Component: 150 - total flux cleaned = -0.000883112 Jy ! Component: 200 - total flux cleaned = -0.00109358 Jy ! Component: 250 - total flux cleaned = -0.00129414 Jy ! Component: 300 - total flux cleaned = -0.00143824 Jy ! Component: 350 - total flux cleaned = -0.00153119 Jy ! Component: 400 - total flux cleaned = -0.00171023 Jy ! Component: 450 - total flux cleaned = -0.00179662 Jy ! Component: 500 - total flux cleaned = -0.00192234 Jy ! Component: 550 - total flux cleaned = -0.001963 Jy ! Component: 600 - total flux cleaned = -0.00198273 Jy ! Component: 650 - total flux cleaned = -0.00200199 Jy ! Component: 700 - total flux cleaned = -0.00203947 Jy ! Component: 750 - total flux cleaned = -0.00209458 Jy ! Component: 800 - total flux cleaned = -0.00213067 Jy ! Component: 850 - total flux cleaned = -0.00213077 Jy ! Component: 900 - total flux cleaned = -0.00213102 Jy ! Component: 950 - total flux cleaned = -0.00221658 Jy ! Component: 1000 - total flux cleaned = -0.00229986 Jy ! Component: 1050 - total flux cleaned = -0.00233266 Jy ! Component: 1100 - total flux cleaned = -0.00241336 Jy ! Component: 1150 - total flux cleaned = -0.00250857 Jy ! Component: 1200 - total flux cleaned = -0.00253967 Jy ! Component: 1250 - total flux cleaned = -0.0026015 Jy ! Component: 1300 - total flux cleaned = -0.00266217 Jy ! Component: 1350 - total flux cleaned = -0.00272187 Jy ! Component: 1400 - total flux cleaned = -0.00275105 Jy ! Component: 1450 - total flux cleaned = -0.00276546 Jy ! Component: 1500 - total flux cleaned = -0.00280811 Jy ! Component: 1550 - total flux cleaned = -0.00283606 Jy ! Component: 1600 - total flux cleaned = -0.00282231 Jy ! Component: 1650 - total flux cleaned = -0.00287683 Jy ! Component: 1700 - total flux cleaned = -0.00291714 Jy ! Component: 1750 - total flux cleaned = -0.00295698 Jy ! Component: 1800 - total flux cleaned = -0.00302247 Jy ! Component: 1850 - total flux cleaned = -0.00302232 Jy ! Component: 1900 - total flux cleaned = -0.00303531 Jy ! Component: 1950 - total flux cleaned = -0.00308594 Jy ! Component: 2000 - total flux cleaned = -0.00308594 Jy ! Component: 2050 - total flux cleaned = -0.00308591 Jy ! Component: 2100 - total flux cleaned = -0.00314732 Jy ! Component: 2150 - total flux cleaned = -0.00313524 Jy ! Component: 2200 - total flux cleaned = -0.00315927 Jy ! Component: 2250 - total flux cleaned = -0.00315946 Jy ! Component: 2300 - total flux cleaned = -0.00320643 Jy ! Component: 2350 - total flux cleaned = -0.00322971 Jy ! Component: 2400 - total flux cleaned = -0.003195 Jy ! Component: 2450 - total flux cleaned = -0.00320644 Jy ! Component: 2500 - total flux cleaned = -0.00318382 Jy ! Component: 2550 - total flux cleaned = -0.00320633 Jy ! Component: 2600 - total flux cleaned = -0.00317299 Jy ! Component: 2650 - total flux cleaned = -0.00318394 Jy ! Component: 2700 - total flux cleaned = -0.00314024 Jy ! Component: 2750 - total flux cleaned = -0.0031511 Jy ! Component: 2800 - total flux cleaned = -0.00316187 Jy ! Component: 2850 - total flux cleaned = -0.00315124 Jy ! Component: 2900 - total flux cleaned = -0.00315138 Jy ! Component: 2950 - total flux cleaned = -0.00320381 Jy ! Component: 3000 - total flux cleaned = -0.00318288 Jy ! Component: 3050 - total flux cleaned = -0.00319324 Jy ! Component: 3100 - total flux cleaned = -0.00322393 Jy ! Component: 3150 - total flux cleaned = -0.00319329 Jy ! Component: 3200 - total flux cleaned = -0.00319343 Jy ! Component: 3250 - total flux cleaned = -0.00320355 Jy ! Component: 3300 - total flux cleaned = -0.0032134 Jy ! Component: 3350 - total flux cleaned = -0.0031737 Jy ! Component: 3400 - total flux cleaned = -0.00319341 Jy ! Component: 3450 - total flux cleaned = -0.00319347 Jy ! Component: 3500 - total flux cleaned = -0.00321296 Jy ! Component: 3550 - total flux cleaned = -0.0032226 Jy ! Component: 3600 - total flux cleaned = -0.00323225 Jy ! Component: 3650 - total flux cleaned = -0.00327054 Jy ! Component: 3700 - total flux cleaned = -0.00327054 Jy ! Component: 3750 - total flux cleaned = -0.00328005 Jy ! Component: 3800 - total flux cleaned = -0.00328002 Jy ! Component: 3850 - total flux cleaned = -0.00329879 Jy ! Component: 3900 - total flux cleaned = -0.00333616 Jy ! Component: 3950 - total flux cleaned = -0.00337339 Jy ! Component: 4000 - total flux cleaned = -0.00338265 Jy ! Component: 4050 - total flux cleaned = -0.00341027 Jy ! Total flux subtracted in 4096 components = -0.00341942 Jy ! Clean residual min=-0.000631 max=0.000566 Jy/beam ! Clean residual mean=0.000001 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.0787378 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 379 components and 0.0787378 Jy ![Exited script file: muppet] wmap "J0653+0508_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.805 x 6.406 at -1.688 degrees (North through East) ! Clean map min=-0.0029519 max=0.048633 Jy/beam ! Writing clean map to FITS file: J0653+0508_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0486332 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148284 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.914706 0.914706 1.82941 3.65882 7.31765 14.6353 29.2706 58.5412 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.805 x 6.406 at -1.688 degrees (North through East) ! Clean map min=-0.0029519 max=0.048633 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0653+0508_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:34 2017