! Started logfile: J0650+0358_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:25 2017 obs J0650+0358_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0650+0358_S_2014_01_04_pus_uva.fits ! AN table 1: 97 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.500859 visibilities/baseline/integration-bin. ! Found source: J0650+0358 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6996 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0650+0358_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866831Jy sigma=0.012392 ! Fit after self-cal, rms=0.857483Jy sigma=0.012246 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=5.952 mas, bpa=-5.255 degrees ! Estimated noise=866.669 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108239 Jy ! Component: 100 - total flux cleaned = 0.132811 Jy ! Total flux subtracted in 100 components = 0.132811 Jy ! Clean residual min=-0.007224 max=0.008919 Jy/beam ! Clean residual mean=0.000008 rms=0.001722 Jy/beam ! Combined flux in latest and established models = 0.132811 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.132811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074741Jy sigma=0.000948 ! Fit after self-cal, rms=0.074744Jy sigma=0.000948 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=6.658 mas, bpa=-4.713 degrees ! Estimated noise=619.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126083 Jy ! Component: 100 - total flux cleaned = 0.018902 Jy ! Component: 150 - total flux cleaned = 0.022857 Jy ! Component: 200 - total flux cleaned = 0.0255149 Jy ! Total flux subtracted in 200 components = 0.0255149 Jy ! Clean residual min=-0.004863 max=0.004787 Jy/beam ! Clean residual mean=0.000004 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.158326 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 41 components and 0.158326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072174Jy sigma=0.000923 ! Fit after self-cal, rms=0.072159Jy sigma=0.000923 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.80 KP 1.00* LA 1.05 ! MK 1.05 NL 1.00 OV 0.97 PT 0.99 ! SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 KP 1.00* LA 0.96 ! MK 1.00 NL 1.03 OV 1.00 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.15 KP 1.00* LA 0.78 ! MK 0.99 NL 1.02 OV 0.92 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.01 KP 1.00* LA 0.86 ! MK 1.01 NL 1.08 OV 0.98 PT 0.96 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.072159Jy sigma=0.000923 ! Fit after self-cal, rms=0.069088Jy sigma=0.000898 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=6.746 mas, bpa=-4.531 degrees ! Estimated noise=621.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78692e-05 Jy ! Component: 100 - total flux cleaned = -2.10165e-06 Jy ! Component: 150 - total flux cleaned = -2.43565e-06 Jy ! Component: 200 - total flux cleaned = -3.71045e-05 Jy ! Total flux subtracted in 200 components = -3.71045e-05 Jy ! Clean residual min=-0.002523 max=0.002436 Jy/beam ! Clean residual mean=-0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.158288 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 49 components and 0.158288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069042Jy sigma=0.000898 ! Fit after self-cal, rms=0.068863Jy sigma=0.000897 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068863Jy sigma=0.000897 ! Fit after self-cal, rms=0.068962Jy sigma=0.000896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=6.744 mas, bpa=-4.59 degrees ! Estimated noise=621.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276912 Jy ! Component: 100 - total flux cleaned = 0.000251933 Jy ! Component: 150 - total flux cleaned = 0.000229447 Jy ! Component: 200 - total flux cleaned = 0.000229339 Jy ! Total flux subtracted in 200 components = 0.000229339 Jy ! Clean residual min=-0.002115 max=0.002274 Jy/beam ! Clean residual mean=-0.000003 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.158518 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.158518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068942Jy sigma=0.000896 ! Fit after self-cal, rms=0.068932Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.87218e-05 Jy ! Component: 100 - total flux cleaned = -3.61919e-05 Jy ! Component: 150 - total flux cleaned = -5.30471e-05 Jy ! Component: 200 - total flux cleaned = -5.29323e-05 Jy ! Total flux subtracted in 200 components = -5.29323e-05 Jy ! Clean residual min=-0.002102 max=0.002246 Jy/beam ! Clean residual mean=-0.000003 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.158465 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.158465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068922Jy sigma=0.000896 ! Fit after self-cal, rms=0.068931Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068931Jy sigma=0.000896 ! Fit after self-cal, rms=0.068876Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=6.746 mas, bpa=-4.558 degrees ! Estimated noise=622.674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000263147 Jy ! Component: 100 - total flux cleaned = 0.000246038 Jy ! Component: 150 - total flux cleaned = 0.000231046 Jy ! Component: 200 - total flux cleaned = 0.000231027 Jy ! Total flux subtracted in 200 components = 0.000231027 Jy ! Clean residual min=-0.002054 max=0.002230 Jy/beam ! Clean residual mean=-0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.158696 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.158696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068866Jy sigma=0.000895 ! Fit after self-cal, rms=0.068857Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-122, 105.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182933 Jy ! Component: 100 - total flux cleaned = 0.00216713 Jy ! Component: 150 - total flux cleaned = 0.00231292 Jy ! Component: 200 - total flux cleaned = 0.00259034 Jy ! Total flux subtracted in 200 components = 0.00259034 Jy ! Clean residual min=-0.001841 max=0.002007 Jy/beam ! Clean residual mean=-0.000003 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.161286 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 74 components and 0.161286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068774Jy sigma=0.000895 ! Fit after self-cal, rms=0.068782Jy sigma=0.000894 ! Inverting map ! Added new window around map position (-23.5, -90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162729 Jy ! Component: 100 - total flux cleaned = 0.00216135 Jy ! Component: 150 - total flux cleaned = 0.00254754 Jy ! Component: 200 - total flux cleaned = 0.00283856 Jy ! Total flux subtracted in 200 components = 0.00283856 Jy ! Clean residual min=-0.001618 max=0.001517 Jy/beam ! Clean residual mean=-0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.164125 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.164125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068728Jy sigma=0.000894 ! Fit after self-cal, rms=0.068723Jy sigma=0.000894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068723Jy sigma=0.000894 ! Fit after self-cal, rms=0.068698Jy sigma=0.000894 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.813 mas, bmaj=10.71 mas, bpa=2.411 degrees ! Estimated noise=737.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000920005 Jy ! Component: 100 - total flux cleaned = 0.00158116 Jy ! Component: 150 - total flux cleaned = 0.00210698 Jy ! Component: 200 - total flux cleaned = 0.00247161 Jy ! Total flux subtracted in 200 components = 0.00247161 Jy ! Clean residual min=-0.001665 max=0.001337 Jy/beam ! Clean residual mean=-0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.166596 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 116 components and 0.166596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068692Jy sigma=0.000893 ! Fit after self-cal, rms=0.068686Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504152 Jy ! Component: 100 - total flux cleaned = 0.000804616 Jy ! Component: 150 - total flux cleaned = 0.000930439 Jy ! Component: 200 - total flux cleaned = 0.00100825 Jy ! Total flux subtracted in 200 components = 0.00100825 Jy ! Clean residual min=-0.001592 max=0.001294 Jy/beam ! Clean residual mean=-0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.167605 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.167605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068683Jy sigma=0.000893 ! Fit after self-cal, rms=0.068682Jy sigma=0.000893 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=6.747 mas, bpa=-4.429 degrees ! Estimated noise=622.443 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.766 x 6.747 at -4.429 degrees (North through East) ! Clean map min=-0.0014133 max=0.14228 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=5.981 mas, bpa=-4.556 degrees ! Estimated noise=885.779 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110594 Jy ! Component: 100 - total flux cleaned = 0.135614 Jy ! Component: 150 - total flux cleaned = 0.145193 Jy ! Component: 200 - total flux cleaned = 0.15011 Jy ! Total flux subtracted in 200 components = 0.15011 Jy ! Clean residual min=-0.003382 max=0.003364 Jy/beam ! Clean residual mean=0.000001 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.15011 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.15011 Jy ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=6.747 mas, bpa=-4.429 degrees ! Estimated noise=622.443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321013 Jy ! Component: 100 - total flux cleaned = 0.00558852 Jy ! Component: 150 - total flux cleaned = 0.00752744 Jy ! Component: 200 - total flux cleaned = 0.00902083 Jy ! Total flux subtracted in 200 components = 0.00902083 Jy ! Clean residual min=-0.001931 max=0.001969 Jy/beam ! Clean residual mean=-0.000001 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.159131 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.159131 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.813 mas, bmaj=10.71 mas, bpa=2.411 degrees ! Estimated noise=737.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184685 Jy ! Component: 100 - total flux cleaned = 0.00314475 Jy ! Component: 150 - total flux cleaned = 0.00416739 Jy ! Component: 200 - total flux cleaned = 0.0050148 Jy ! Total flux subtracted in 200 components = 0.0050148 Jy ! Clean residual min=-0.001780 max=0.001459 Jy/beam ! Clean residual mean=-0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.164145 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000636733 Jy ! Component: 100 - total flux cleaned = 0.00106759 Jy ! Component: 150 - total flux cleaned = 0.00138438 Jy ! Component: 200 - total flux cleaned = 0.00165231 Jy ! Total flux subtracted in 200 components = 0.00165231 Jy ! Clean residual min=-0.001618 max=0.001493 Jy/beam ! Clean residual mean=-0.000002 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.165798 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 89 components and 0.165798 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.766 mas, bmaj=6.747 mas, bpa=-4.429 degrees ! Estimated noise=622.443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198373 Jy ! Component: 100 - total flux cleaned = 0.000162541 Jy ! Component: 150 - total flux cleaned = 9.72062e-05 Jy ! Component: 200 - total flux cleaned = 0.000159332 Jy ! Total flux subtracted in 200 components = 0.000159332 Jy ! Clean residual min=-0.001510 max=0.001642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.165957 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.165957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068708Jy sigma=0.000894 ! Fit after self-cal, rms=0.068707Jy sigma=0.000894 wmodel J0650+0358_S_2014_01_04_pus_map.mod ! Writing 113 model components to file: J0650+0358_S_2014_01_04_pus_map.mod wobs J0650+0358_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0650+0358_S_2014_01_04_pus_uvs.fits wwins J0650+0358_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0650+0358_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182536 Jy ! Component: 100 - total flux cleaned = -0.000446032 Jy ! Component: 150 - total flux cleaned = -0.000695383 Jy ! Component: 200 - total flux cleaned = -0.000790605 Jy ! Component: 250 - total flux cleaned = -0.000904214 Jy ! Component: 300 - total flux cleaned = -0.000969572 Jy ! Component: 350 - total flux cleaned = -0.00111965 Jy ! Component: 400 - total flux cleaned = -0.00124398 Jy ! Component: 450 - total flux cleaned = -0.00140494 Jy ! Component: 500 - total flux cleaned = -0.00146355 Jy ! Component: 550 - total flux cleaned = -0.00150228 Jy ! Component: 600 - total flux cleaned = -0.00159538 Jy ! Component: 650 - total flux cleaned = -0.00161307 Jy ! Component: 700 - total flux cleaned = -0.00156027 Jy ! Component: 750 - total flux cleaned = -0.00147341 Jy ! Component: 800 - total flux cleaned = -0.00145632 Jy ! Component: 850 - total flux cleaned = -0.00137249 Jy ! Component: 900 - total flux cleaned = -0.0013394 Jy ! Component: 950 - total flux cleaned = -0.00132336 Jy ! Component: 1000 - total flux cleaned = -0.00126025 Jy ! Component: 1050 - total flux cleaned = -0.00124469 Jy ! Component: 1100 - total flux cleaned = -0.00121448 Jy ! Component: 1150 - total flux cleaned = -0.00122943 Jy ! Component: 1200 - total flux cleaned = -0.00119964 Jy ! Component: 1250 - total flux cleaned = -0.00117032 Jy ! Component: 1300 - total flux cleaned = -0.00115604 Jy ! Component: 1350 - total flux cleaned = -0.00118432 Jy ! Component: 1400 - total flux cleaned = -0.00125365 Jy ! Component: 1450 - total flux cleaned = -0.00126707 Jy ! Component: 1500 - total flux cleaned = -0.0012671 Jy ! Component: 1550 - total flux cleaned = -0.00133355 Jy ! Component: 1600 - total flux cleaned = -0.00129392 Jy ! Component: 1650 - total flux cleaned = -0.00128083 Jy ! Component: 1700 - total flux cleaned = -0.00130625 Jy ! Component: 1750 - total flux cleaned = -0.00129367 Jy ! Component: 1800 - total flux cleaned = -0.00131877 Jy ! Component: 1850 - total flux cleaned = -0.00129419 Jy ! Component: 1900 - total flux cleaned = -0.00128192 Jy ! Component: 1950 - total flux cleaned = -0.00129399 Jy ! Component: 2000 - total flux cleaned = -0.00128207 Jy ! Component: 2050 - total flux cleaned = -0.00127017 Jy ! Component: 2100 - total flux cleaned = -0.00127041 Jy ! Component: 2150 - total flux cleaned = -0.00130489 Jy ! Component: 2200 - total flux cleaned = -0.00129351 Jy ! Component: 2250 - total flux cleaned = -0.00132729 Jy ! Component: 2300 - total flux cleaned = -0.00136053 Jy ! Component: 2350 - total flux cleaned = -0.00138254 Jy ! Component: 2400 - total flux cleaned = -0.00138256 Jy ! Component: 2450 - total flux cleaned = -0.00140414 Jy ! Component: 2500 - total flux cleaned = -0.00139345 Jy ! Component: 2550 - total flux cleaned = -0.00140402 Jy ! Component: 2600 - total flux cleaned = -0.0014356 Jy ! Component: 2650 - total flux cleaned = -0.00143547 Jy ! Component: 2700 - total flux cleaned = -0.0014252 Jy ! Component: 2750 - total flux cleaned = -0.00145618 Jy ! Component: 2800 - total flux cleaned = -0.00149704 Jy ! Component: 2850 - total flux cleaned = -0.00146661 Jy ! Component: 2900 - total flux cleaned = -0.00149684 Jy ! Component: 2950 - total flux cleaned = -0.00151681 Jy ! Component: 3000 - total flux cleaned = -0.00155635 Jy ! Component: 3050 - total flux cleaned = -0.00154646 Jy ! Component: 3100 - total flux cleaned = -0.00157575 Jy ! Component: 3150 - total flux cleaned = -0.00159511 Jy ! Component: 3200 - total flux cleaned = -0.00164338 Jy ! Component: 3250 - total flux cleaned = -0.00167218 Jy ! Component: 3300 - total flux cleaned = -0.00171031 Jy ! Component: 3350 - total flux cleaned = -0.00172925 Jy ! Component: 3400 - total flux cleaned = -0.00173868 Jy ! Component: 3450 - total flux cleaned = -0.00173866 Jy ! Component: 3500 - total flux cleaned = -0.00177597 Jy ! Component: 3550 - total flux cleaned = -0.00177601 Jy ! Component: 3600 - total flux cleaned = -0.00177605 Jy ! Component: 3650 - total flux cleaned = -0.00178532 Jy ! Component: 3700 - total flux cleaned = -0.0018037 Jy ! Component: 3750 - total flux cleaned = -0.00187677 Jy ! Component: 3800 - total flux cleaned = -0.00186766 Jy ! Component: 3850 - total flux cleaned = -0.0018586 Jy ! Component: 3900 - total flux cleaned = -0.00191263 Jy ! Component: 3950 - total flux cleaned = -0.00192161 Jy ! Component: 4000 - total flux cleaned = -0.00193946 Jy ! Component: 4050 - total flux cleaned = -0.00193951 Jy ! Total flux subtracted in 4096 components = -0.00197502 Jy ! Clean residual min=-0.000622 max=0.000596 Jy/beam ! Clean residual mean=-0.000001 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.163982 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 349 components and 0.163982 Jy ![Exited script file: muppet] wmap "J0650+0358_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.766 x 6.747 at -4.429 degrees (North through East) ! Clean map min=-0.0010634 max=0.14367 Jy/beam ! Writing clean map to FITS file: J0650+0358_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000148739 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.31058 0.31058 0.621161 1.24232 2.48464 4.96929 9.93857 19.8771 39.7543 79.5086 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.766 x 6.747 at -4.429 degrees (North through East) ! Clean map min=-0.0010634 max=0.14367 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0650+0358_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:30 2017