! Started logfile: J0648-3044_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:17:40 2016 obs J0648-3044_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0648-3044_S_2014_05_31_pus_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.451971 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0648-3044 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 5044 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0648-3044_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 305 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 305 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 305 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 305 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.664156Jy sigma=0.005212 ! Fit after self-cal, rms=0.574014Jy sigma=0.004404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=13.39 mas, bpa=13.53 degrees ! Estimated noise=1622.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.337573 Jy ! Component: 100 - total flux cleaned = 0.449514 Jy ! Total flux subtracted in 100 components = 0.449514 Jy ! Clean residual min=-0.022983 max=0.053413 Jy/beam ! Clean residual mean=-0.000071 rms=0.007564 Jy/beam ! Combined flux in latest and established models = 0.449514 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.449514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167393Jy sigma=0.001336 ! Fit after self-cal, rms=0.166639Jy sigma=0.001332 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0625115 Jy ! Component: 100 - total flux cleaned = 0.0992712 Jy ! Total flux subtracted in 100 components = 0.0992712 Jy ! Clean residual min=-0.018062 max=0.019822 Jy/beam ! Clean residual mean=-0.000002 rms=0.004424 Jy/beam ! Combined flux in latest and established models = 0.548785 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 0.548785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135199Jy sigma=0.001017 ! Fit after self-cal, rms=0.134953Jy sigma=0.001016 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.996 mas, bmaj=15.42 mas, bpa=13.16 degrees ! Estimated noise=1257.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033773 Jy ! Component: 100 - total flux cleaned = 0.0526426 Jy ! Component: 150 - total flux cleaned = 0.0640403 Jy ! Component: 200 - total flux cleaned = 0.0710721 Jy ! Total flux subtracted in 200 components = 0.0710721 Jy ! Clean residual min=-0.012859 max=0.011820 Jy/beam ! Clean residual mean=0.000072 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 0.619857 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 89 components and 0.619857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126543Jy sigma=0.000939 ! Fit after self-cal, rms=0.126463Jy sigma=0.000939 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.84 HN 1.14 KP 1.03 ! LA 1.19 MK 1.00* NL 0.97 OV 0.95 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.16 KP 1.01 ! LA 1.13 MK 1.00* NL 1.05 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.13 HN 1.14 KP 0.92 ! LA 0.91 MK 1.00* NL 1.00 OV 0.91 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.08 KP 0.88 ! LA 0.87 MK 1.00* NL 1.08 OV 0.98 ! PT 1.02 SC 0.95 ! ! ! Fit before self-cal, rms=0.126463Jy sigma=0.000939 ! Fit after self-cal, rms=0.115433Jy sigma=0.000816 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.006 mas, bmaj=15.68 mas, bpa=13.52 degrees ! Estimated noise=1261.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00663538 Jy ! Component: 100 - total flux cleaned = -0.00754623 Jy ! Component: 150 - total flux cleaned = -0.00815902 Jy ! Component: 200 - total flux cleaned = -0.00904865 Jy ! Total flux subtracted in 200 components = -0.00904865 Jy ! Clean residual min=-0.007560 max=0.007638 Jy/beam ! Clean residual mean=-0.000027 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.610809 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 104 components and 0.610808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114398Jy sigma=0.000810 ! Fit after self-cal, rms=0.114421Jy sigma=0.000810 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114421Jy sigma=0.000810 ! Fit after self-cal, rms=0.114518Jy sigma=0.000791 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.014 mas, bmaj=15.66 mas, bpa=13.39 degrees ! Estimated noise=1262.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0042081 Jy ! Component: 100 - total flux cleaned = -0.00513849 Jy ! Component: 150 - total flux cleaned = -0.00588036 Jy ! Component: 200 - total flux cleaned = -0.00648658 Jy ! Total flux subtracted in 200 components = -0.00648658 Jy ! Clean residual min=-0.005674 max=0.005047 Jy/beam ! Clean residual mean=-0.000002 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.604322 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.604322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114134Jy sigma=0.000788 ! Fit after self-cal, rms=0.114177Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0007667 Jy ! Component: 100 - total flux cleaned = -0.00115378 Jy ! Component: 150 - total flux cleaned = -0.00136298 Jy ! Component: 200 - total flux cleaned = -0.00149183 Jy ! Total flux subtracted in 200 components = -0.00149183 Jy ! Clean residual min=-0.005340 max=0.004888 Jy/beam ! Clean residual mean=-0.000005 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 0.60283 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.60283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114097Jy sigma=0.000787 ! Fit after self-cal, rms=0.114085Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114085Jy sigma=0.000787 ! Fit after self-cal, rms=0.116981Jy sigma=0.000784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=15.69 mas, bpa=13.42 degrees ! Estimated noise=1265.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00325254 Jy ! Component: 100 - total flux cleaned = -0.00394284 Jy ! Component: 150 - total flux cleaned = -0.00434643 Jy ! Component: 200 - total flux cleaned = -0.00461018 Jy ! Total flux subtracted in 200 components = -0.00461018 Jy ! Clean residual min=-0.004578 max=0.004627 Jy/beam ! Clean residual mean=0.000002 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.59822 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 121 components and 0.59822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116734Jy sigma=0.000782 ! Fit after self-cal, rms=0.116771Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337574 Jy ! Component: 100 - total flux cleaned = -0.000566079 Jy ! Component: 150 - total flux cleaned = -0.000771209 Jy ! Component: 200 - total flux cleaned = -0.000959041 Jy ! Total flux subtracted in 200 components = -0.000959041 Jy ! Clean residual min=-0.004476 max=0.004550 Jy/beam ! Clean residual mean=-0.000000 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.597261 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.597261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116688Jy sigma=0.000781 ! Fit after self-cal, rms=0.116681Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116681Jy sigma=0.000781 ! Fit after self-cal, rms=0.118218Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.565 mas, bmaj=24.52 mas, bpa=3.236 degrees ! Estimated noise=1377.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00248868 Jy ! Component: 100 - total flux cleaned = -0.00271053 Jy ! Component: 150 - total flux cleaned = -0.00290542 Jy ! Component: 200 - total flux cleaned = -0.00307678 Jy ! Total flux subtracted in 200 components = -0.00307678 Jy ! Clean residual min=-0.004040 max=0.003783 Jy/beam ! Clean residual mean=-0.000007 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.594184 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 130 components and 0.594184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118111Jy sigma=0.000780 ! Fit after self-cal, rms=0.118114Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355829 Jy ! Component: 100 - total flux cleaned = -0.000430215 Jy ! Component: 150 - total flux cleaned = -0.000494428 Jy ! Component: 200 - total flux cleaned = -0.00058266 Jy ! Total flux subtracted in 200 components = -0.00058266 Jy ! Clean residual min=-0.003857 max=0.003693 Jy/beam ! Clean residual mean=-0.000009 rms=0.001276 Jy/beam ! Combined flux in latest and established models = 0.593601 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 131 components and 0.593601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118076Jy sigma=0.000780 ! Fit after self-cal, rms=0.118066Jy sigma=0.000780 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=15.73 mas, bpa=13.48 degrees ! Estimated noise=1266.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 15.73 at 13.48 degrees (North through East) ! Clean map min=-0.0040073 max=0.44773 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=13.56 mas, bpa=13.91 degrees ! Estimated noise=1646.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.342319 Jy ! Component: 100 - total flux cleaned = 0.453992 Jy ! Component: 150 - total flux cleaned = 0.510065 Jy ! Component: 200 - total flux cleaned = 0.54035 Jy ! Total flux subtracted in 200 components = 0.54035 Jy ! Clean residual min=-0.009171 max=0.015900 Jy/beam ! Clean residual mean=-0.000031 rms=0.002450 Jy/beam ! Combined flux in latest and established models = 0.54035 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.54035 Jy ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=15.73 mas, bpa=13.48 degrees ! Estimated noise=1266.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023432 Jy ! Component: 100 - total flux cleaned = 0.0353984 Jy ! Component: 150 - total flux cleaned = 0.0419589 Jy ! Component: 200 - total flux cleaned = 0.0457588 Jy ! Total flux subtracted in 200 components = 0.0457588 Jy ! Clean residual min=-0.004566 max=0.006305 Jy/beam ! Clean residual mean=-0.000021 rms=0.001264 Jy/beam ! Combined flux in latest and established models = 0.586109 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 74 components and 0.586109 Jy ! Inverting map ! Added new window around map position (7.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431788 Jy ! Component: 100 - total flux cleaned = 0.00533575 Jy ! Component: 150 - total flux cleaned = 0.00628461 Jy ! Component: 200 - total flux cleaned = 0.00699959 Jy ! Total flux subtracted in 200 components = 0.00699959 Jy ! Clean residual min=-0.003996 max=0.004242 Jy/beam ! Clean residual mean=-0.000009 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.593108 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 0.593108 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.565 mas, bmaj=24.52 mas, bpa=3.236 degrees ! Estimated noise=1377.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161595 Jy ! Component: 100 - total flux cleaned = 0.00179668 Jy ! Component: 150 - total flux cleaned = 0.00187906 Jy ! Component: 200 - total flux cleaned = 0.00199167 Jy ! Total flux subtracted in 200 components = 0.00199167 Jy ! Clean residual min=-0.003966 max=0.003616 Jy/beam ! Clean residual mean=-0.000007 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.5951 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.42203e-05 Jy ! Component: 100 - total flux cleaned = 9.56451e-05 Jy ! Component: 150 - total flux cleaned = 9.49902e-05 Jy ! Component: 200 - total flux cleaned = 0.000124316 Jy ! Total flux subtracted in 200 components = 0.000124316 Jy ! Clean residual min=-0.003963 max=0.003564 Jy/beam ! Clean residual mean=-0.000007 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.595224 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 115 components and 0.595224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.024 mas, bmaj=15.73 mas, bpa=13.48 degrees ! Estimated noise=1266.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511314 Jy ! Component: 100 - total flux cleaned = -0.000457627 Jy ! Component: 150 - total flux cleaned = -0.000342643 Jy ! Component: 200 - total flux cleaned = -0.00018484 Jy ! Total flux subtracted in 200 components = -0.00018484 Jy ! Clean residual min=-0.003881 max=0.003973 Jy/beam ! Clean residual mean=-0.000005 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.59504 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 130 components and 0.59504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117717Jy sigma=0.000777 ! Fit after self-cal, rms=0.117690Jy sigma=0.000777 wmodel J0648-3044_S_2014_05_31_pus_map.mod ! Writing 130 model components to file: J0648-3044_S_2014_05_31_pus_map.mod wobs J0648-3044_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0648-3044_S_2014_05_31_pus_uvs.fits wwins J0648-3044_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J0648-3044_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000590708 Jy ! Component: 100 - total flux cleaned = -0.000792123 Jy ! Component: 150 - total flux cleaned = -0.000918562 Jy ! Component: 200 - total flux cleaned = -0.00104021 Jy ! Component: 250 - total flux cleaned = -0.00098227 Jy ! Component: 300 - total flux cleaned = -0.000981658 Jy ! Component: 350 - total flux cleaned = -0.000815614 Jy ! Component: 400 - total flux cleaned = -0.000600337 Jy ! Component: 450 - total flux cleaned = -0.000441778 Jy ! Component: 500 - total flux cleaned = -0.000133925 Jy ! Component: 550 - total flux cleaned = -3.32154e-05 Jy ! Component: 600 - total flux cleaned = 6.63702e-05 Jy ! Component: 650 - total flux cleaned = 0.000357306 Jy ! Component: 700 - total flux cleaned = 0.000594064 Jy ! Component: 750 - total flux cleaned = 0.000686964 Jy ! Component: 800 - total flux cleaned = 0.000868968 Jy ! Component: 850 - total flux cleaned = 0.000958518 Jy ! Component: 900 - total flux cleaned = 0.00126509 Jy ! Component: 950 - total flux cleaned = 0.00135083 Jy ! Component: 1000 - total flux cleaned = 0.00152224 Jy ! Component: 1050 - total flux cleaned = 0.00173186 Jy ! Component: 1100 - total flux cleaned = 0.00185527 Jy ! Component: 1150 - total flux cleaned = 0.00181423 Jy ! Component: 1200 - total flux cleaned = 0.00197472 Jy ! Component: 1250 - total flux cleaned = 0.00193436 Jy ! Component: 1300 - total flux cleaned = 0.00189497 Jy ! Component: 1350 - total flux cleaned = 0.00197246 Jy ! Component: 1400 - total flux cleaned = 0.00201095 Jy ! Component: 1450 - total flux cleaned = 0.00201064 Jy ! Component: 1500 - total flux cleaned = 0.00178677 Jy ! Component: 1550 - total flux cleaned = 0.0018236 Jy ! Component: 1600 - total flux cleaned = 0.00186006 Jy ! Component: 1650 - total flux cleaned = 0.00175159 Jy ! Component: 1700 - total flux cleaned = 0.00175124 Jy ! Component: 1750 - total flux cleaned = 0.00164555 Jy ! Component: 1800 - total flux cleaned = 0.00157618 Jy ! Component: 1850 - total flux cleaned = 0.00164509 Jy ! Component: 1900 - total flux cleaned = 0.0016449 Jy ! Component: 1950 - total flux cleaned = 0.00150928 Jy ! Component: 2000 - total flux cleaned = 0.00150995 Jy ! Component: 2050 - total flux cleaned = 0.00157632 Jy ! Component: 2100 - total flux cleaned = 0.00147734 Jy ! Component: 2150 - total flux cleaned = 0.00141222 Jy ! Component: 2200 - total flux cleaned = 0.00131527 Jy ! Component: 2250 - total flux cleaned = 0.00131492 Jy ! Component: 2300 - total flux cleaned = 0.00131463 Jy ! Component: 2350 - total flux cleaned = 0.00115686 Jy ! Component: 2400 - total flux cleaned = 0.00109425 Jy ! Component: 2450 - total flux cleaned = 0.00109469 Jy ! Component: 2500 - total flux cleaned = 0.00100264 Jy ! Component: 2550 - total flux cleaned = 0.000941808 Jy ! Component: 2600 - total flux cleaned = 0.000971901 Jy ! Component: 2650 - total flux cleaned = 0.000852342 Jy ! Component: 2700 - total flux cleaned = 0.000881684 Jy ! Component: 2750 - total flux cleaned = 0.000851841 Jy ! Component: 2800 - total flux cleaned = 0.000851622 Jy ! Component: 2850 - total flux cleaned = 0.000735631 Jy ! Component: 2900 - total flux cleaned = 0.000735469 Jy ! Component: 2950 - total flux cleaned = 0.000678553 Jy ! Component: 3000 - total flux cleaned = 0.000650069 Jy ! Component: 3050 - total flux cleaned = 0.000593902 Jy ! Component: 3100 - total flux cleaned = 0.000621643 Jy ! Component: 3150 - total flux cleaned = 0.000566536 Jy ! Component: 3200 - total flux cleaned = 0.000621472 Jy ! Component: 3250 - total flux cleaned = 0.000512827 Jy ! Component: 3300 - total flux cleaned = 0.000539629 Jy ! Component: 3350 - total flux cleaned = 0.00053944 Jy ! Component: 3400 - total flux cleaned = 0.000433063 Jy ! Component: 3450 - total flux cleaned = 0.000433065 Jy ! Component: 3500 - total flux cleaned = 0.000433405 Jy ! Component: 3550 - total flux cleaned = 0.000381599 Jy ! Component: 3600 - total flux cleaned = 0.00035632 Jy ! Component: 3650 - total flux cleaned = 0.000305287 Jy ! Component: 3700 - total flux cleaned = 0.000432696 Jy ! Component: 3750 - total flux cleaned = 0.000281119 Jy ! Component: 3800 - total flux cleaned = 0.000381688 Jy ! Component: 3850 - total flux cleaned = 0.000306904 Jy ! Component: 3900 - total flux cleaned = 0.000331631 Jy ! Component: 3950 - total flux cleaned = 0.000257672 Jy ! Component: 4000 - total flux cleaned = 0.000282047 Jy ! Component: 4050 - total flux cleaned = 0.000160334 Jy ! Total flux subtracted in 4096 components = 0.000160503 Jy ! Clean residual min=-0.001224 max=0.001532 Jy/beam ! Clean residual mean=0.000003 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.5952 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 408 components and 0.5952 Jy ![Exited script file: muppet] wmap "J0648-3044_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 15.73 at 13.48 degrees (North through East) ! Clean map min=-0.0031738 max=0.44877 Jy/beam ! Writing clean map to FITS file: J0648-3044_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.448766 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000483614 device "J0648-3044_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0648-3044_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.323295 0.323295 0.646591 1.29318 2.58636 5.17273 10.3455 20.6909 41.3818 82.7636 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.448 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.024 x 15.73 at 13.48 degrees (North through East) ! Clean map min=-0.0031738 max=0.44877 Jy/beam quit ! Quitting program ! Log file J0648-3044_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:17:47 2016