! Started logfile: J0646-3903_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:57:29 2016 obs J0646-3903_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0646-3903_S_2014_08_09_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.540278 visibilities/baseline/integration-bin. ! Found source: J0646-3903 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 10892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0646-3903_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 283 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 336 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 336 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 336 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.901995Jy sigma=0.006233 ! Fit after self-cal, rms=0.867984Jy sigma=0.006026 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=17.02 mas, bpa=8.952 degrees ! Estimated noise=1679.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0995775 Jy ! Component: 100 - total flux cleaned = 0.132018 Jy ! Total flux subtracted in 100 components = 0.132018 Jy ! Clean residual min=-0.010851 max=0.016579 Jy/beam ! Clean residual mean=0.000175 rms=0.003538 Jy/beam ! Combined flux in latest and established models = 0.132018 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.132018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126324Jy sigma=0.000814 ! Fit after self-cal, rms=0.126201Jy sigma=0.000813 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=19.69 mas, bpa=8.069 degrees ! Estimated noise=1044.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288407 Jy ! Component: 100 - total flux cleaned = 0.043779 Jy ! Component: 150 - total flux cleaned = 0.0521509 Jy ! Component: 200 - total flux cleaned = 0.0569797 Jy ! Total flux subtracted in 200 components = 0.0569797 Jy ! Clean residual min=-0.005674 max=0.006773 Jy/beam ! Clean residual mean=0.000026 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 0.188998 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 89 components and 0.188998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119902Jy sigma=0.000764 ! Fit after self-cal, rms=0.119744Jy sigma=0.000763 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.02 KP 1.05 ! LA 1.06 MK 1.00* NL 1.15 OV 0.95 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.02 ! LA 0.99 MK 1.00* NL 1.16 OV 1.02 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00* KP 0.92 ! LA 0.85 MK 1.00* NL 1.08 OV 0.92 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 0.91 ! LA 0.79 MK 1.00* NL 1.17 OV 1.01 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.119744Jy sigma=0.000763 ! Fit after self-cal, rms=0.119478Jy sigma=0.000753 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.892 mas, bmaj=20.19 mas, bpa=8.214 degrees ! Estimated noise=1040.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115831 Jy ! Component: 100 - total flux cleaned = -0.00128372 Jy ! Component: 150 - total flux cleaned = -0.00133993 Jy ! Component: 200 - total flux cleaned = -0.00139022 Jy ! Total flux subtracted in 200 components = -0.00139022 Jy ! Clean residual min=-0.004301 max=0.006104 Jy/beam ! Clean residual mean=0.000052 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.187608 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 96 components and 0.187608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119413Jy sigma=0.000753 ! Fit after self-cal, rms=0.119447Jy sigma=0.000752 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119447Jy sigma=0.000752 ! Fit after self-cal, rms=0.120092Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.882 mas, bmaj=20.26 mas, bpa=8.257 degrees ! Estimated noise=1039.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000478242 Jy ! Component: 100 - total flux cleaned = -0.000530328 Jy ! Component: 150 - total flux cleaned = -0.00057547 Jy ! Component: 200 - total flux cleaned = -0.000614782 Jy ! Total flux subtracted in 200 components = -0.000614782 Jy ! Clean residual min=-0.003866 max=0.005782 Jy/beam ! Clean residual mean=0.000055 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.186993 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.186993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120054Jy sigma=0.000751 ! Fit after self-cal, rms=0.120056Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.5, 43.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055241 Jy ! Component: 100 - total flux cleaned = 0.00873489 Jy ! Component: 150 - total flux cleaned = 0.0108545 Jy ! Component: 200 - total flux cleaned = 0.0122845 Jy ! Total flux subtracted in 200 components = 0.0122845 Jy ! Clean residual min=-0.002848 max=0.003489 Jy/beam ! Clean residual mean=0.000030 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.199277 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 144 components and 0.199277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119813Jy sigma=0.000749 ! Fit after self-cal, rms=0.119763Jy sigma=0.000749 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119763Jy sigma=0.000749 ! Fit after self-cal, rms=0.119628Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.869 mas, bmaj=20.21 mas, bpa=8.251 degrees ! Estimated noise=1033.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180417 Jy ! Component: 100 - total flux cleaned = 0.0025063 Jy ! Component: 150 - total flux cleaned = 0.00274935 Jy ! Component: 200 - total flux cleaned = 0.00285876 Jy ! Total flux subtracted in 200 components = 0.00285876 Jy ! Clean residual min=-0.002314 max=0.002807 Jy/beam ! Clean residual mean=0.000018 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.202136 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 171 components and 0.202136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119585Jy sigma=0.000748 ! Fit after self-cal, rms=0.119596Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605229 Jy ! Component: 100 - total flux cleaned = 0.000746501 Jy ! Component: 150 - total flux cleaned = 0.000874958 Jy ! Component: 200 - total flux cleaned = 0.000993831 Jy ! Total flux subtracted in 200 components = 0.000993831 Jy ! Clean residual min=-0.002230 max=0.002660 Jy/beam ! Clean residual mean=0.000017 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.20313 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 187 components and 0.20313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119574Jy sigma=0.000748 ! Fit after self-cal, rms=0.119569Jy sigma=0.000748 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119569Jy sigma=0.000748 ! Fit after self-cal, rms=0.119702Jy sigma=0.000748 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.074 mas, bmaj=32.89 mas, bpa=-4.501 degrees ! Estimated noise=1188.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403897 Jy ! Component: 100 - total flux cleaned = 0.000765039 Jy ! Component: 150 - total flux cleaned = 0.000864403 Jy ! Component: 200 - total flux cleaned = 0.000907909 Jy ! Total flux subtracted in 200 components = 0.000907909 Jy ! Clean residual min=-0.002034 max=0.002610 Jy/beam ! Clean residual mean=0.000023 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.204038 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 201 components and 0.204038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119690Jy sigma=0.000748 ! Fit after self-cal, rms=0.119693Jy sigma=0.000748 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176109 Jy ! Component: 100 - total flux cleaned = 0.00027271 Jy ! Component: 150 - total flux cleaned = 0.00032949 Jy ! Component: 200 - total flux cleaned = 0.000380588 Jy ! Total flux subtracted in 200 components = 0.000380588 Jy ! Clean residual min=-0.002090 max=0.002630 Jy/beam ! Clean residual mean=0.000023 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.204419 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 211 components and 0.204418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119686Jy sigma=0.000748 ! Fit after self-cal, rms=0.119682Jy sigma=0.000748 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=20.21 mas, bpa=8.268 degrees ! Estimated noise=1032.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.868 x 20.21 at 8.268 degrees (North through East) ! Clean map min=-0.0022425 max=0.1343 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=17.46 mas, bpa=9.023 degrees ! Estimated noise=1657.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.09759 Jy ! Component: 100 - total flux cleaned = 0.131875 Jy ! Component: 150 - total flux cleaned = 0.152026 Jy ! Component: 200 - total flux cleaned = 0.16433 Jy ! Total flux subtracted in 200 components = 0.16433 Jy ! Clean residual min=-0.006265 max=0.007457 Jy/beam ! Clean residual mean=0.000090 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.16433 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.16433 Jy ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=20.21 mas, bpa=8.268 degrees ! Estimated noise=1032.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112437 Jy ! Component: 100 - total flux cleaned = 0.0186098 Jy ! Component: 150 - total flux cleaned = 0.0239843 Jy ! Component: 200 - total flux cleaned = 0.0280133 Jy ! Total flux subtracted in 200 components = 0.0280133 Jy ! Clean residual min=-0.002924 max=0.003398 Jy/beam ! Clean residual mean=0.000038 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.192343 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 110 components and 0.192343 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.074 mas, bmaj=32.89 mas, bpa=-4.501 degrees ! Estimated noise=1188.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419141 Jy ! Component: 100 - total flux cleaned = 0.00690604 Jy ! Component: 150 - total flux cleaned = 0.00876686 Jy ! Component: 200 - total flux cleaned = 0.0100726 Jy ! Total flux subtracted in 200 components = 0.0100726 Jy ! Clean residual min=-0.002136 max=0.002472 Jy/beam ! Clean residual mean=0.000031 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.202415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000934001 Jy ! Component: 100 - total flux cleaned = 0.00130652 Jy ! Component: 150 - total flux cleaned = 0.00156583 Jy ! Component: 200 - total flux cleaned = 0.00166847 Jy ! Total flux subtracted in 200 components = 0.00166847 Jy ! Clean residual min=-0.002118 max=0.002580 Jy/beam ! Clean residual mean=0.000026 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.204084 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 211 components and 0.204084 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.868 mas, bmaj=20.21 mas, bpa=8.268 degrees ! Estimated noise=1032.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376049 Jy ! Component: 100 - total flux cleaned = 0.000377133 Jy ! Component: 150 - total flux cleaned = 0.000408934 Jy ! Component: 200 - total flux cleaned = 0.000497997 Jy ! Total flux subtracted in 200 components = 0.000497997 Jy ! Clean residual min=-0.002256 max=0.002347 Jy/beam ! Clean residual mean=0.000014 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.204582 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 247 components and 0.204582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119668Jy sigma=0.000748 ! Fit after self-cal, rms=0.119643Jy sigma=0.000748 wmodel J0646-3903_S_2014_08_09_pus_map.mod ! Writing 247 model components to file: J0646-3903_S_2014_08_09_pus_map.mod wobs J0646-3903_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0646-3903_S_2014_08_09_pus_uvs.fits wwins J0646-3903_S_2014_08_09_pus_map.win ! wwins: Wrote 3 windows to J0646-3903_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00061271 Jy ! Component: 100 - total flux cleaned = 0.000801067 Jy ! Component: 150 - total flux cleaned = 0.000977858 Jy ! Component: 200 - total flux cleaned = 0.00111248 Jy ! Component: 250 - total flux cleaned = 0.00137235 Jy ! Component: 300 - total flux cleaned = 0.00152931 Jy ! Component: 350 - total flux cleaned = 0.0018046 Jy ! Component: 400 - total flux cleaned = 0.00204262 Jy ! Component: 450 - total flux cleaned = 0.00221667 Jy ! Component: 500 - total flux cleaned = 0.00238698 Jy ! Component: 550 - total flux cleaned = 0.00252555 Jy ! Component: 600 - total flux cleaned = 0.00268847 Jy ! Component: 650 - total flux cleaned = 0.00284787 Jy ! Component: 700 - total flux cleaned = 0.00300429 Jy ! Component: 750 - total flux cleaned = 0.00313259 Jy ! Component: 800 - total flux cleaned = 0.00330832 Jy ! Component: 850 - total flux cleaned = 0.00333317 Jy ! Component: 900 - total flux cleaned = 0.00343055 Jy ! Component: 950 - total flux cleaned = 0.00350192 Jy ! Component: 1000 - total flux cleaned = 0.00357255 Jy ! Component: 1050 - total flux cleaned = 0.00361808 Jy ! Component: 1100 - total flux cleaned = 0.00359525 Jy ! Component: 1150 - total flux cleaned = 0.00361751 Jy ! Component: 1200 - total flux cleaned = 0.00366138 Jy ! Component: 1250 - total flux cleaned = 0.00363997 Jy ! Component: 1300 - total flux cleaned = 0.0036821 Jy ! Component: 1350 - total flux cleaned = 0.00359841 Jy ! Component: 1400 - total flux cleaned = 0.00364005 Jy ! Component: 1450 - total flux cleaned = 0.00366047 Jy ! Component: 1500 - total flux cleaned = 0.00364025 Jy ! Component: 1550 - total flux cleaned = 0.00366018 Jy ! Component: 1600 - total flux cleaned = 0.00362103 Jy ! Component: 1650 - total flux cleaned = 0.00364023 Jy ! Component: 1700 - total flux cleaned = 0.00358277 Jy ! Component: 1750 - total flux cleaned = 0.00352647 Jy ! Component: 1800 - total flux cleaned = 0.00347075 Jy ! Component: 1850 - total flux cleaned = 0.00343379 Jy ! Component: 1900 - total flux cleaned = 0.00343384 Jy ! Component: 1950 - total flux cleaned = 0.00339782 Jy ! Component: 2000 - total flux cleaned = 0.00338026 Jy ! Component: 2050 - total flux cleaned = 0.00336307 Jy ! Component: 2100 - total flux cleaned = 0.0034667 Jy ! Component: 2150 - total flux cleaned = 0.00339808 Jy ! Component: 2200 - total flux cleaned = 0.00339802 Jy ! Component: 2250 - total flux cleaned = 0.00339821 Jy ! Component: 2300 - total flux cleaned = 0.00339818 Jy ! Component: 2350 - total flux cleaned = 0.00341477 Jy ! Component: 2400 - total flux cleaned = 0.00336609 Jy ! Component: 2450 - total flux cleaned = 0.00336616 Jy ! Component: 2500 - total flux cleaned = 0.00338215 Jy ! Component: 2550 - total flux cleaned = 0.00335063 Jy ! Component: 2600 - total flux cleaned = 0.00333506 Jy ! Component: 2650 - total flux cleaned = 0.00331951 Jy ! Component: 2700 - total flux cleaned = 0.00328878 Jy ! Component: 2750 - total flux cleaned = 0.00327359 Jy ! Component: 2800 - total flux cleaned = 0.00322821 Jy ! Component: 2850 - total flux cleaned = 0.00324311 Jy ! Component: 2900 - total flux cleaned = 0.00324328 Jy ! Component: 2950 - total flux cleaned = 0.00322863 Jy ! Component: 3000 - total flux cleaned = 0.00324339 Jy ! Component: 3050 - total flux cleaned = 0.00319972 Jy ! Component: 3100 - total flux cleaned = 0.00322863 Jy ! Component: 3150 - total flux cleaned = 0.0031999 Jy ! Component: 3200 - total flux cleaned = 0.00317134 Jy ! Component: 3250 - total flux cleaned = 0.00314317 Jy ! Component: 3300 - total flux cleaned = 0.00312928 Jy ! Component: 3350 - total flux cleaned = 0.00310137 Jy ! Component: 3400 - total flux cleaned = 0.00310143 Jy ! Component: 3450 - total flux cleaned = 0.00304661 Jy ! Component: 3500 - total flux cleaned = 0.00303308 Jy ! Component: 3550 - total flux cleaned = 0.0029791 Jy ! Component: 3600 - total flux cleaned = 0.00297912 Jy ! Component: 3650 - total flux cleaned = 0.00297911 Jy ! Component: 3700 - total flux cleaned = 0.00297914 Jy ! Component: 3750 - total flux cleaned = 0.00295279 Jy ! Component: 3800 - total flux cleaned = 0.00295284 Jy ! Component: 3850 - total flux cleaned = 0.00295281 Jy ! Component: 3900 - total flux cleaned = 0.00293976 Jy ! Component: 3950 - total flux cleaned = 0.00292671 Jy ! Component: 4000 - total flux cleaned = 0.00288848 Jy ! Component: 4050 - total flux cleaned = 0.00286316 Jy ! Total flux subtracted in 4096 components = 0.00286307 Jy ! Clean residual min=-0.000696 max=0.000732 Jy/beam ! Clean residual mean=-0.000001 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.207445 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 556 components and 0.207445 Jy ![Exited script file: muppet] wmap "J0646-3903_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.868 x 20.21 at 8.268 degrees (North through East) ! Clean map min=-0.0018354 max=0.13241 Jy/beam ! Writing clean map to FITS file: J0646-3903_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132415 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246786 device "J0646-3903_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0646-3903_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.55912 0.55912 1.11824 2.23648 4.47296 8.94592 17.8918 35.7837 71.5674 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.868 x 20.21 at 8.268 degrees (North through East) ! Clean map min=-0.0018354 max=0.13241 Jy/beam quit ! Quitting program ! Log file J0646-3903_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:57:34 2016