! Started logfile: J0645+0541_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:16 2017 obs J0645+0541_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0645+0541_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0645+0541 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0645+0541_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.983255Jy sigma=0.014083 ! Fit after self-cal, rms=0.952411Jy sigma=0.013602 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.055 mas, bmaj=5.764 mas, bpa=-5.632 degrees ! Estimated noise=856.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323435 Jy ! Component: 100 - total flux cleaned = 0.0436247 Jy ! Total flux subtracted in 100 components = 0.0436247 Jy ! Clean residual min=-0.005769 max=0.007702 Jy/beam ! Clean residual mean=0.000016 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.0436247 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0436247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078585Jy sigma=0.000989 ! Fit after self-cal, rms=0.078196Jy sigma=0.000980 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=6.553 mas, bpa=-4.509 degrees ! Estimated noise=560.563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159304 Jy ! Component: 100 - total flux cleaned = 0.0260313 Jy ! Component: 150 - total flux cleaned = 0.0329801 Jy ! Component: 200 - total flux cleaned = 0.037905 Jy ! Total flux subtracted in 200 components = 0.037905 Jy ! Clean residual min=-0.007435 max=0.011670 Jy/beam ! Clean residual mean=0.000029 rms=0.002703 Jy/beam ! Combined flux in latest and established models = 0.0815297 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 0.0815297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074050Jy sigma=0.000928 ! Fit after self-cal, rms=0.073664Jy sigma=0.000924 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.73 KP 1.00* LA 0.80 ! MK 0.88 NL 1.51 OV 0.93 PT 0.81 ! SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.90 KP 1.00* LA 0.76 ! MK 0.87 NL 1.59 OV 0.92 PT 0.79 ! SC 1.29 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.03 KP 1.00* LA 0.61 ! MK 0.97 NL 1.47 OV 0.81 PT 0.76 ! SC 1.35 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.94 KP 1.00* LA 0.69 ! MK 1.02 NL 1.47 OV 0.88 PT 0.81 ! SC 1.24 ! ! ! Fit before self-cal, rms=0.073664Jy sigma=0.000924 ! Fit after self-cal, rms=0.078198Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.836 mas, bmaj=7.054 mas, bpa=-7.786 degrees ! Estimated noise=564.348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23.5, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746728 Jy ! Component: 100 - total flux cleaned = 0.00702507 Jy ! Component: 150 - total flux cleaned = 0.00669239 Jy ! Component: 200 - total flux cleaned = 0.0065973 Jy ! Total flux subtracted in 200 components = 0.0065973 Jy ! Clean residual min=-0.004945 max=0.007058 Jy/beam ! Clean residual mean=0.000005 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.088127 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.088127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077320Jy sigma=0.000875 ! Fit after self-cal, rms=0.077313Jy sigma=0.000865 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077313Jy sigma=0.000865 ! Fit after self-cal, rms=0.072032Jy sigma=0.000863 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.728 mas, bmaj=7.015 mas, bpa=-7.162 degrees ! Estimated noise=537.553 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266442 Jy ! Component: 100 - total flux cleaned = 0.00214491 Jy ! Component: 150 - total flux cleaned = 0.00178534 Jy ! Component: 200 - total flux cleaned = 0.00159252 Jy ! Total flux subtracted in 200 components = 0.00159252 Jy ! Clean residual min=-0.003496 max=0.004437 Jy/beam ! Clean residual mean=0.000003 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.0897195 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.0897195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071773Jy sigma=0.000858 ! Fit after self-cal, rms=0.071605Jy sigma=0.000856 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295307 Jy ! Component: 100 - total flux cleaned = 0.00241611 Jy ! Component: 150 - total flux cleaned = 0.00181502 Jy ! Component: 200 - total flux cleaned = 0.00140781 Jy ! Total flux subtracted in 200 components = 0.00140781 Jy ! Clean residual min=-0.003104 max=0.003412 Jy/beam ! Clean residual mean=0.000002 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.0911273 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.0911273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071306Jy sigma=0.000852 ! Fit after self-cal, rms=0.071220Jy sigma=0.000852 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071220Jy sigma=0.000852 ! Fit after self-cal, rms=0.068951Jy sigma=0.000850 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.765 mas, bmaj=6.951 mas, bpa=-5.528 degrees ! Estimated noise=529.818 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165354 Jy ! Component: 100 - total flux cleaned = 0.00159367 Jy ! Component: 150 - total flux cleaned = 0.00128465 Jy ! Component: 200 - total flux cleaned = 0.00112271 Jy ! Total flux subtracted in 200 components = 0.00112271 Jy ! Clean residual min=-0.002570 max=0.003126 Jy/beam ! Clean residual mean=0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.09225 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 108 components and 0.09225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068784Jy sigma=0.000848 ! Fit after self-cal, rms=0.068795Jy sigma=0.000847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253953 Jy ! Component: 100 - total flux cleaned = 3.45209e-06 Jy ! Component: 150 - total flux cleaned = -0.000275183 Jy ! Component: 200 - total flux cleaned = -0.000324088 Jy ! Total flux subtracted in 200 components = -0.000324088 Jy ! Clean residual min=-0.002684 max=0.003033 Jy/beam ! Clean residual mean=0.000002 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.0919259 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 0.091926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068675Jy sigma=0.000846 ! Fit after self-cal, rms=0.068699Jy sigma=0.000846 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068699Jy sigma=0.000846 ! Fit after self-cal, rms=0.067963Jy sigma=0.000845 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.111 mas, bmaj=10.8 mas, bpa=2.641 degrees ! Estimated noise=602.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333179 Jy ! Component: 100 - total flux cleaned = 0.000330199 Jy ! Component: 150 - total flux cleaned = 0.000429506 Jy ! Component: 200 - total flux cleaned = 0.000429836 Jy ! Total flux subtracted in 200 components = 0.000429836 Jy ! Clean residual min=-0.002709 max=0.003402 Jy/beam ! Clean residual mean=0.000003 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.0923558 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 130 components and 0.0923558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067956Jy sigma=0.000844 ! Fit after self-cal, rms=0.067989Jy sigma=0.000844 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.98326e-05 Jy ! Component: 100 - total flux cleaned = -3.66496e-05 Jy ! Component: 150 - total flux cleaned = -7.73215e-05 Jy ! Component: 200 - total flux cleaned = -7.75201e-05 Jy ! Total flux subtracted in 200 components = -7.75201e-05 Jy ! Clean residual min=-0.002629 max=0.003246 Jy/beam ! Clean residual mean=0.000003 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.0922783 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 138 components and 0.0922783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067988Jy sigma=0.000843 ! Fit after self-cal, rms=0.067968Jy sigma=0.000843 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=6.92 mas, bpa=-4.35 degrees ! Estimated noise=525.478 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 6.92 at -4.35 degrees (North through East) ! Clean map min=-0.0044156 max=0.040537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.067 mas, bmaj=6.022 mas, bpa=-4.942 degrees ! Estimated noise=831.444 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029288 Jy ! Component: 100 - total flux cleaned = 0.0449555 Jy ! Component: 150 - total flux cleaned = 0.0566477 Jy ! Component: 200 - total flux cleaned = 0.0651541 Jy ! Total flux subtracted in 200 components = 0.0651541 Jy ! Clean residual min=-0.007040 max=0.008094 Jy/beam ! Clean residual mean=0.000007 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.0651541 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0651541 Jy ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=6.92 mas, bpa=-4.35 degrees ! Estimated noise=525.478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109884 Jy ! Component: 100 - total flux cleaned = 0.0185261 Jy ! Component: 150 - total flux cleaned = 0.022117 Jy ! Component: 200 - total flux cleaned = 0.0245775 Jy ! Total flux subtracted in 200 components = 0.0245775 Jy ! Clean residual min=-0.004058 max=0.004542 Jy/beam ! Clean residual mean=0.000004 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.0897316 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 37 components and 0.0897316 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.111 mas, bmaj=10.8 mas, bpa=2.641 degrees ! Estimated noise=602.346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452156 Jy ! Component: 100 - total flux cleaned = 0.00466817 Jy ! Component: 150 - total flux cleaned = 0.00430574 Jy ! Component: 200 - total flux cleaned = 0.00430424 Jy ! Total flux subtracted in 200 components = 0.00430424 Jy ! Clean residual min=-0.003429 max=0.004169 Jy/beam ! Clean residual mean=0.000002 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.0940358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021447 Jy ! Component: 100 - total flux cleaned = -0.000416012 Jy ! Component: 150 - total flux cleaned = -0.000602085 Jy ! Component: 200 - total flux cleaned = -0.000718501 Jy ! Total flux subtracted in 200 components = -0.000718501 Jy ! Clean residual min=-0.003205 max=0.003828 Jy/beam ! Clean residual mean=0.000002 rms=0.001130 Jy/beam ! Combined flux in latest and established models = 0.0933173 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 0.0933173 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=6.92 mas, bpa=-4.35 degrees ! Estimated noise=525.478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000263999 Jy ! Component: 100 - total flux cleaned = -0.000442341 Jy ! Component: 150 - total flux cleaned = -0.000436625 Jy ! Component: 200 - total flux cleaned = -0.000578742 Jy ! Total flux subtracted in 200 components = -0.000578742 Jy ! Clean residual min=-0.002788 max=0.003103 Jy/beam ! Clean residual mean=0.000002 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.0927386 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 79 components and 0.0927386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068033Jy sigma=0.000845 ! Fit after self-cal, rms=0.067948Jy sigma=0.000845 wmodel J0645+0541_S_2014_01_04_pus_map.mod ! Writing 79 model components to file: J0645+0541_S_2014_01_04_pus_map.mod wobs J0645+0541_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0645+0541_S_2014_01_04_pus_uvs.fits wwins J0645+0541_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0645+0541_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000857357 Jy ! Component: 100 - total flux cleaned = 0.00167025 Jy ! Component: 150 - total flux cleaned = 0.00215476 Jy ! Component: 200 - total flux cleaned = 0.00244439 Jy ! Component: 250 - total flux cleaned = 0.00267879 Jy ! Component: 300 - total flux cleaned = 0.00289713 Jy ! Component: 350 - total flux cleaned = 0.00296562 Jy ! Component: 400 - total flux cleaned = 0.00306377 Jy ! Component: 450 - total flux cleaned = 0.00309455 Jy ! Component: 500 - total flux cleaned = 0.00309531 Jy ! Component: 550 - total flux cleaned = 0.0030952 Jy ! Component: 600 - total flux cleaned = 0.00303959 Jy ! Component: 650 - total flux cleaned = 0.00298699 Jy ! Component: 700 - total flux cleaned = 0.0029098 Jy ! Component: 750 - total flux cleaned = 0.00273865 Jy ! Component: 800 - total flux cleaned = 0.00266773 Jy ! Component: 850 - total flux cleaned = 0.0025085 Jy ! Component: 900 - total flux cleaned = 0.00237679 Jy ! Component: 950 - total flux cleaned = 0.00226909 Jy ! Component: 1000 - total flux cleaned = 0.00208335 Jy ! Component: 1050 - total flux cleaned = 0.00196312 Jy ! Component: 1100 - total flux cleaned = 0.0018271 Jy ! Component: 1150 - total flux cleaned = 0.00175156 Jy ! Component: 1200 - total flux cleaned = 0.00169649 Jy ! Component: 1250 - total flux cleaned = 0.00160652 Jy ! Component: 1300 - total flux cleaned = 0.00151908 Jy ! Component: 1350 - total flux cleaned = 0.00145035 Jy ! Component: 1400 - total flux cleaned = 0.00141729 Jy ! Component: 1450 - total flux cleaned = 0.00145025 Jy ! Component: 1500 - total flux cleaned = 0.00148214 Jy ! Component: 1550 - total flux cleaned = 0.00149797 Jy ! Component: 1600 - total flux cleaned = 0.00151314 Jy ! Component: 1650 - total flux cleaned = 0.00152819 Jy ! Component: 1700 - total flux cleaned = 0.00152798 Jy ! Component: 1750 - total flux cleaned = 0.00151364 Jy ! Component: 1800 - total flux cleaned = 0.00144283 Jy ! Component: 1850 - total flux cleaned = 0.0014012 Jy ! Component: 1900 - total flux cleaned = 0.00135998 Jy ! Component: 1950 - total flux cleaned = 0.00131904 Jy ! Component: 2000 - total flux cleaned = 0.00125205 Jy ! Component: 2050 - total flux cleaned = 0.00123886 Jy ! Component: 2100 - total flux cleaned = 0.0011867 Jy ! Component: 2150 - total flux cleaned = 0.00113536 Jy ! Component: 2200 - total flux cleaned = 0.00108457 Jy ! Component: 2250 - total flux cleaned = 0.00112236 Jy ! Component: 2300 - total flux cleaned = 0.00108493 Jy ! Component: 2350 - total flux cleaned = 0.00103576 Jy ! Component: 2400 - total flux cleaned = 0.00101134 Jy ! Component: 2450 - total flux cleaned = 0.000999268 Jy ! Component: 2500 - total flux cleaned = 0.00096342 Jy ! Component: 2550 - total flux cleaned = 0.000939796 Jy ! Component: 2600 - total flux cleaned = 0.000893135 Jy ! Component: 2650 - total flux cleaned = 0.000869947 Jy ! Component: 2700 - total flux cleaned = 0.000824141 Jy ! Component: 2750 - total flux cleaned = 0.000767538 Jy ! Component: 2800 - total flux cleaned = 0.000778694 Jy ! Component: 2850 - total flux cleaned = 0.000745359 Jy ! Component: 2900 - total flux cleaned = 0.000745246 Jy ! Component: 2950 - total flux cleaned = 0.000701461 Jy ! Component: 3000 - total flux cleaned = 0.000690549 Jy ! Component: 3050 - total flux cleaned = 0.000669015 Jy ! Component: 3100 - total flux cleaned = 0.000690255 Jy ! Component: 3150 - total flux cleaned = 0.000658324 Jy ! Component: 3200 - total flux cleaned = 0.000668961 Jy ! Component: 3250 - total flux cleaned = 0.000648017 Jy ! Component: 3300 - total flux cleaned = 0.000668761 Jy ! Component: 3350 - total flux cleaned = 0.000689454 Jy ! Component: 3400 - total flux cleaned = 0.000679126 Jy ! Component: 3450 - total flux cleaned = 0.000679266 Jy ! Component: 3500 - total flux cleaned = 0.000719962 Jy ! Component: 3550 - total flux cleaned = 0.000750197 Jy ! Component: 3600 - total flux cleaned = 0.000740098 Jy ! Component: 3650 - total flux cleaned = 0.000790037 Jy ! Component: 3700 - total flux cleaned = 0.000790061 Jy ! Component: 3750 - total flux cleaned = 0.000809978 Jy ! Component: 3800 - total flux cleaned = 0.000868986 Jy ! Component: 3850 - total flux cleaned = 0.000849368 Jy ! Component: 3900 - total flux cleaned = 0.00087859 Jy ! Component: 3950 - total flux cleaned = 0.000888338 Jy ! Component: 4000 - total flux cleaned = 0.000898 Jy ! Component: 4050 - total flux cleaned = 0.000897974 Jy ! Total flux subtracted in 4096 components = 0.000917079 Jy ! Clean residual min=-0.000586 max=0.000527 Jy/beam ! Clean residual mean=0.000001 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.0936557 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 342 components and 0.0936557 Jy ![Exited script file: muppet] wmap "J0645+0541_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 6.92 at -4.35 degrees (North through East) ! Clean map min=-0.0038778 max=0.039689 Jy/beam ! Writing clean map to FITS file: J0645+0541_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0396887 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160247 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21128 1.21128 2.42256 4.84512 9.69024 19.3805 38.7609 77.5219 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.806 x 6.92 at -4.35 degrees (North through East) ! Clean map min=-0.0038778 max=0.039689 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0645+0541_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:20 2017