! Started logfile: J0644-3459_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:11 2017 obs J0644-3459_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0644-3459_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0644-3459 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0644-3459_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.750337Jy sigma=0.007583 ! Fit after self-cal, rms=0.614998Jy sigma=0.006063 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.328 mas, bmaj=6.018 mas, bpa=3.705 degrees ! Estimated noise=1247.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.288618 Jy ! Component: 100 - total flux cleaned = 0.378674 Jy ! Total flux subtracted in 100 components = 0.378674 Jy ! Clean residual min=-0.028925 max=0.045825 Jy/beam ! Clean residual mean=-0.000501 rms=0.008685 Jy/beam ! Combined flux in latest and established models = 0.378674 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.378674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162697Jy sigma=0.001540 ! Fit after self-cal, rms=0.162826Jy sigma=0.001539 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=7.033 mas, bpa=1.677 degrees ! Estimated noise=773.267 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769388 Jy ! Component: 100 - total flux cleaned = 0.115309 Jy ! Component: 150 - total flux cleaned = 0.135997 Jy ! Component: 200 - total flux cleaned = 0.14744 Jy ! Total flux subtracted in 200 components = 0.14744 Jy ! Clean residual min=-0.018689 max=0.024799 Jy/beam ! Clean residual mean=-0.000767 rms=0.006514 Jy/beam ! Combined flux in latest and established models = 0.526115 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.526115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123824Jy sigma=0.001160 ! Fit after self-cal, rms=0.124002Jy sigma=0.001158 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.97 ! MK 1.03 NL 1.05 OV 0.89 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* KP 1.00* LA 0.95 ! MK 0.99 NL 1.12 OV 0.95 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.78 ! MK 1.02 NL 1.07 OV 0.88 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.85 ! MK 1.00 NL 1.18 OV 0.94 PT 0.95 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.124002Jy sigma=0.001158 ! Fit after self-cal, rms=0.108124Jy sigma=0.000980 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.075 mas, bpa=1.902 degrees ! Estimated noise=769.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161833 Jy ! Component: 100 - total flux cleaned = 0.0192719 Jy ! Component: 150 - total flux cleaned = 0.0199121 Jy ! Component: 200 - total flux cleaned = 0.0202823 Jy ! Total flux subtracted in 200 components = 0.0202823 Jy ! Clean residual min=-0.009522 max=0.011839 Jy/beam ! Clean residual mean=-0.000147 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 0.546397 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 68 components and 0.546397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105609Jy sigma=0.000953 ! Fit after self-cal, rms=0.105232Jy sigma=0.000951 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105232Jy sigma=0.000951 ! Fit after self-cal, rms=0.104647Jy sigma=0.000943 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.058 mas, bpa=1.752 degrees ! Estimated noise=766.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863519 Jy ! Component: 100 - total flux cleaned = 0.00165775 Jy ! Component: 150 - total flux cleaned = 0.00192199 Jy ! Component: 200 - total flux cleaned = 0.00216123 Jy ! Total flux subtracted in 200 components = 0.00216123 Jy ! Clean residual min=-0.008034 max=0.011311 Jy/beam ! Clean residual mean=-0.000114 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.548558 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 73 components and 0.548558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104137Jy sigma=0.000940 ! Fit after self-cal, rms=0.104099Jy sigma=0.000939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789256 Jy ! Component: 100 - total flux cleaned = 0.0104886 Jy ! Component: 150 - total flux cleaned = 0.0115744 Jy ! Component: 200 - total flux cleaned = 0.0117682 Jy ! Total flux subtracted in 200 components = 0.0117682 Jy ! Clean residual min=-0.006798 max=0.007876 Jy/beam ! Clean residual mean=-0.000039 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.560327 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.560326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102374Jy sigma=0.000928 ! Fit after self-cal, rms=0.102335Jy sigma=0.000927 ! Inverting map ! Added new window around map position (-19, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00538782 Jy ! Component: 100 - total flux cleaned = 0.00614931 Jy ! Component: 150 - total flux cleaned = 0.00700736 Jy ! Component: 200 - total flux cleaned = 0.00732445 Jy ! Total flux subtracted in 200 components = 0.00732445 Jy ! Clean residual min=-0.006288 max=0.005734 Jy/beam ! Clean residual mean=0.000005 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.567651 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.567651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101418Jy sigma=0.000921 ! Fit after self-cal, rms=0.101391Jy sigma=0.000921 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101391Jy sigma=0.000921 ! Fit after self-cal, rms=0.100373Jy sigma=0.000918 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.029 mas, bpa=1.638 degrees ! Estimated noise=762.131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000514247 Jy ! Component: 100 - total flux cleaned = 0.00097327 Jy ! Component: 150 - total flux cleaned = 0.00111546 Jy ! Component: 200 - total flux cleaned = 0.00149195 Jy ! Total flux subtracted in 200 components = 0.00149195 Jy ! Clean residual min=-0.004965 max=0.004781 Jy/beam ! Clean residual mean=0.000016 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.569143 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 0.569143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099914Jy sigma=0.000915 ! Fit after self-cal, rms=0.099892Jy sigma=0.000915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.94315e-05 Jy ! Component: 100 - total flux cleaned = 0.000314737 Jy ! Component: 150 - total flux cleaned = 0.000417805 Jy ! Component: 200 - total flux cleaned = 0.000421195 Jy ! Total flux subtracted in 200 components = 0.000421195 Jy ! Clean residual min=-0.004257 max=0.004237 Jy/beam ! Clean residual mean=0.000017 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.569564 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 0.569564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099636Jy sigma=0.000913 ! Fit after self-cal, rms=0.099627Jy sigma=0.000913 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099627Jy sigma=0.000913 ! Fit after self-cal, rms=0.099070Jy sigma=0.000913 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.669 mas, bmaj=22.47 mas, bpa=4.794 degrees ! Estimated noise=954.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224896 Jy ! Component: 100 - total flux cleaned = 0.000606505 Jy ! Component: 150 - total flux cleaned = 0.000932997 Jy ! Component: 200 - total flux cleaned = 0.00121758 Jy ! Total flux subtracted in 200 components = 0.00121758 Jy ! Clean residual min=-0.002413 max=0.003157 Jy/beam ! Clean residual mean=0.000053 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.570782 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 148 components and 0.570782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098995Jy sigma=0.000912 ! Fit after self-cal, rms=0.098978Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221419 Jy ! Component: 100 - total flux cleaned = 0.000269058 Jy ! Component: 150 - total flux cleaned = 0.000311907 Jy ! Component: 200 - total flux cleaned = 0.000352301 Jy ! Total flux subtracted in 200 components = 0.000352301 Jy ! Clean residual min=-0.002212 max=0.002957 Jy/beam ! Clean residual mean=0.000056 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.571134 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 156 components and 0.571134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098964Jy sigma=0.000912 ! Fit after self-cal, rms=0.098963Jy sigma=0.000912 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.016 mas, bpa=1.616 degrees ! Estimated noise=760.02 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.823 x 7.016 at 1.616 degrees (North through East) ! Clean map min=-0.0059095 max=0.38551 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=5.974 mas, bpa=3.64 degrees ! Estimated noise=1226.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.284283 Jy ! Component: 100 - total flux cleaned = 0.376109 Jy ! Component: 150 - total flux cleaned = 0.429663 Jy ! Component: 200 - total flux cleaned = 0.463533 Jy ! Total flux subtracted in 200 components = 0.463533 Jy ! Clean residual min=-0.018422 max=0.029582 Jy/beam ! Clean residual mean=-0.000215 rms=0.004533 Jy/beam ! Combined flux in latest and established models = 0.463533 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.463533 Jy ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.016 mas, bpa=1.616 degrees ! Estimated noise=760.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349752 Jy ! Component: 100 - total flux cleaned = 0.0547747 Jy ! Component: 150 - total flux cleaned = 0.0685509 Jy ! Component: 200 - total flux cleaned = 0.0789406 Jy ! Total flux subtracted in 200 components = 0.0789406 Jy ! Clean residual min=-0.006932 max=0.008280 Jy/beam ! Clean residual mean=-0.000145 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.542473 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 58 components and 0.542473 Jy ! Inverting map ! Added new window around map position (3, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00716247 Jy ! Component: 100 - total flux cleaned = 0.0114009 Jy ! Component: 150 - total flux cleaned = 0.0149283 Jy ! Component: 200 - total flux cleaned = 0.0180658 Jy ! Total flux subtracted in 200 components = 0.0180658 Jy ! Clean residual min=-0.005042 max=0.003952 Jy/beam ! Clean residual mean=-0.000037 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.560539 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 83 components and 0.560539 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.669 mas, bmaj=22.47 mas, bpa=4.794 degrees ! Estimated noise=954.568 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457723 Jy ! Component: 100 - total flux cleaned = 0.00689195 Jy ! Component: 150 - total flux cleaned = 0.00756616 Jy ! Component: 200 - total flux cleaned = 0.00811225 Jy ! Total flux subtracted in 200 components = 0.00811225 Jy ! Clean residual min=-0.002478 max=0.002661 Jy/beam ! Clean residual mean=0.000020 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.568651 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387935 Jy ! Component: 100 - total flux cleaned = 0.000572454 Jy ! Component: 150 - total flux cleaned = 0.000771757 Jy ! Component: 200 - total flux cleaned = 0.000875098 Jy ! Total flux subtracted in 200 components = 0.000875098 Jy ! Clean residual min=-0.002058 max=0.002579 Jy/beam ! Clean residual mean=0.000030 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.569527 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 107 components and 0.569526 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=7.016 mas, bpa=1.616 degrees ! Estimated noise=760.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171888 Jy ! Component: 100 - total flux cleaned = -0.00185696 Jy ! Component: 150 - total flux cleaned = -0.00163437 Jy ! Component: 200 - total flux cleaned = -0.00134371 Jy ! Total flux subtracted in 200 components = -0.00134371 Jy ! Clean residual min=-0.003107 max=0.003252 Jy/beam ! Clean residual mean=0.000006 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.568183 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 128 components and 0.568183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098515Jy sigma=0.000909 ! Fit after self-cal, rms=0.098470Jy sigma=0.000909 wmodel J0644-3459_S_2014_01_04_pus_map.mod ! Writing 128 model components to file: J0644-3459_S_2014_01_04_pus_map.mod wobs J0644-3459_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0644-3459_S_2014_01_04_pus_uvs.fits wwins J0644-3459_S_2014_01_04_pus_map.win ! wwins: Wrote 6 windows to J0644-3459_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545272 Jy ! Component: 100 - total flux cleaned = 0.000795506 Jy ! Component: 150 - total flux cleaned = 0.000840893 Jy ! Component: 200 - total flux cleaned = 0.000840752 Jy ! Component: 250 - total flux cleaned = 0.00075662 Jy ! Component: 300 - total flux cleaned = 0.000675773 Jy ! Component: 350 - total flux cleaned = 0.000559036 Jy ! Component: 400 - total flux cleaned = 0.000408737 Jy ! Component: 450 - total flux cleaned = 0.000263811 Jy ! Component: 500 - total flux cleaned = 0.00019465 Jy ! Component: 550 - total flux cleaned = 0.000160278 Jy ! Component: 600 - total flux cleaned = 6.08061e-05 Jy ! Component: 650 - total flux cleaned = -3.60626e-05 Jy ! Component: 700 - total flux cleaned = -9.86459e-05 Jy ! Component: 750 - total flux cleaned = -3.71287e-05 Jy ! Component: 800 - total flux cleaned = 2.25174e-05 Jy ! Component: 850 - total flux cleaned = -3.56979e-05 Jy ! Component: 900 - total flux cleaned = 7.89757e-05 Jy ! Component: 950 - total flux cleaned = 0.000107159 Jy ! Component: 1000 - total flux cleaned = 0.000217388 Jy ! Component: 1050 - total flux cleaned = 0.000271137 Jy ! Component: 1100 - total flux cleaned = 0.000377293 Jy ! Component: 1150 - total flux cleaned = 0.000325763 Jy ! Component: 1200 - total flux cleaned = 0.000351595 Jy ! Component: 1250 - total flux cleaned = 0.00027642 Jy ! Component: 1300 - total flux cleaned = 0.000277068 Jy ! Component: 1350 - total flux cleaned = 0.000204256 Jy ! Component: 1400 - total flux cleaned = 0.000108854 Jy ! Component: 1450 - total flux cleaned = 1.50574e-05 Jy ! Component: 1500 - total flux cleaned = -0.000123632 Jy ! Component: 1550 - total flux cleaned = -0.000237279 Jy ! Component: 1600 - total flux cleaned = -0.000304636 Jy ! Component: 1650 - total flux cleaned = -0.000437397 Jy ! Component: 1700 - total flux cleaned = -0.000481078 Jy ! Component: 1750 - total flux cleaned = -0.000653473 Jy ! Component: 1800 - total flux cleaned = -0.00073862 Jy ! Component: 1850 - total flux cleaned = -0.000843631 Jy ! Component: 1900 - total flux cleaned = -0.000967666 Jy ! Component: 1950 - total flux cleaned = -0.00102908 Jy ! Component: 2000 - total flux cleaned = -0.0011099 Jy ! Component: 2050 - total flux cleaned = -0.00122984 Jy ! Component: 2100 - total flux cleaned = -0.00128903 Jy ! Component: 2150 - total flux cleaned = -0.00132798 Jy ! Component: 2200 - total flux cleaned = -0.0014244 Jy ! Component: 2250 - total flux cleaned = -0.00146264 Jy ! Component: 2300 - total flux cleaned = -0.00151944 Jy ! Component: 2350 - total flux cleaned = -0.00157545 Jy ! Component: 2400 - total flux cleaned = -0.00159414 Jy ! Component: 2450 - total flux cleaned = -0.00161257 Jy ! Component: 2500 - total flux cleaned = -0.00170338 Jy ! Component: 2550 - total flux cleaned = -0.00173931 Jy ! Component: 2600 - total flux cleaned = -0.00179281 Jy ! Component: 2650 - total flux cleaned = -0.00184574 Jy ! Component: 2700 - total flux cleaned = -0.00186299 Jy ! Component: 2750 - total flux cleaned = -0.00188038 Jy ! Component: 2800 - total flux cleaned = -0.0019661 Jy ! Component: 2850 - total flux cleaned = -0.00198304 Jy ! Component: 2900 - total flux cleaned = -0.0020336 Jy ! Component: 2950 - total flux cleaned = -0.0020336 Jy ! Component: 3000 - total flux cleaned = -0.00205024 Jy ! Component: 3050 - total flux cleaned = -0.00206673 Jy ! Component: 3100 - total flux cleaned = -0.00205052 Jy ! Component: 3150 - total flux cleaned = -0.00206659 Jy ! Component: 3200 - total flux cleaned = -0.00206659 Jy ! Component: 3250 - total flux cleaned = -0.00208245 Jy ! Component: 3300 - total flux cleaned = -0.00203491 Jy ! Component: 3350 - total flux cleaned = -0.00205076 Jy ! Component: 3400 - total flux cleaned = -0.00203525 Jy ! Component: 3450 - total flux cleaned = -0.00200426 Jy ! Component: 3500 - total flux cleaned = -0.00201972 Jy ! Component: 3550 - total flux cleaned = -0.00203497 Jy ! Component: 3600 - total flux cleaned = -0.00201975 Jy ! Component: 3650 - total flux cleaned = -0.00206505 Jy ! Component: 3700 - total flux cleaned = -0.00200505 Jy ! Component: 3750 - total flux cleaned = -0.00200506 Jy ! Component: 3800 - total flux cleaned = -0.00203467 Jy ! Component: 3850 - total flux cleaned = -0.00203459 Jy ! Component: 3900 - total flux cleaned = -0.0020491 Jy ! Component: 3950 - total flux cleaned = -0.00206367 Jy ! Component: 4000 - total flux cleaned = -0.00204926 Jy ! Component: 4050 - total flux cleaned = -0.00202045 Jy ! Total flux subtracted in 4096 components = -0.00202052 Jy ! Clean residual min=-0.000929 max=0.000838 Jy/beam ! Clean residual mean=0.000004 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.566162 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 359 components and 0.566162 Jy ![Exited script file: muppet] wmap "J0644-3459_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.823 x 7.016 at 1.616 degrees (North through East) ! Clean map min=-0.0038143 max=0.38899 Jy/beam ! Writing clean map to FITS file: J0644-3459_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.388988 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.177882 0.177882 0.355765 0.711529 1.42306 2.84612 5.69223 11.3845 22.7689 45.5379 91.0757 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.388 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.823 x 7.016 at 1.616 degrees (North through East) ! Clean map min=-0.0038143 max=0.38899 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0644-3459_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:16 2017