! Started logfile: J0643+0724_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:06 2017 obs J0643+0724_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0643+0724_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0643+0724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0643+0724_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932787Jy sigma=0.013407 ! Fit after self-cal, rms=0.895899Jy sigma=0.012863 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=5.589 mas, bpa=-4.156 degrees ! Estimated noise=744.782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0711035 Jy ! Component: 100 - total flux cleaned = 0.108616 Jy ! Total flux subtracted in 100 components = 0.108616 Jy ! Clean residual min=-0.016009 max=0.030004 Jy/beam ! Clean residual mean=0.000048 rms=0.006235 Jy/beam ! Combined flux in latest and established models = 0.108616 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.108616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130421Jy sigma=0.001741 ! Fit after self-cal, rms=0.130204Jy sigma=0.001738 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=6.456 mas, bpa=-3.9 degrees ! Estimated noise=552.609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0538701 Jy ! Component: 100 - total flux cleaned = 0.0872172 Jy ! Component: 150 - total flux cleaned = 0.108965 Jy ! Component: 200 - total flux cleaned = 0.123629 Jy ! Total flux subtracted in 200 components = 0.123629 Jy ! Clean residual min=-0.019141 max=0.044508 Jy/beam ! Clean residual mean=0.000067 rms=0.008235 Jy/beam ! Combined flux in latest and established models = 0.232245 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.232245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101625Jy sigma=0.001348 ! Fit after self-cal, rms=0.099481Jy sigma=0.001336 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.71 KP 1.00* LA 0.87 ! MK 0.53 NL 1.56 OV 0.83 PT 0.77 ! SC 2.19 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 0.86 KP 1.00* LA 0.86 ! MK 0.57 NL 1.67 OV 0.87 PT 0.76 ! SC 2.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.95 KP 1.00* LA 0.71 ! MK 0.62 NL 1.68 OV 0.82 PT 0.73 ! SC 2.18 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 0.81 KP 1.00* LA 0.81 ! MK 0.75 NL 1.73 OV 0.88 PT 0.78 ! SC 1.92 ! ! ! Fit before self-cal, rms=0.099481Jy sigma=0.001336 ! Fit after self-cal, rms=0.105045Jy sigma=0.001082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=7.654 mas, bpa=-18.12 degrees ! Estimated noise=499.394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120471 Jy ! Component: 100 - total flux cleaned = -0.0011958 Jy ! Component: 150 - total flux cleaned = -0.00137044 Jy ! Component: 200 - total flux cleaned = -0.00153709 Jy ! Total flux subtracted in 200 components = -0.00153709 Jy ! Clean residual min=-0.011838 max=0.018366 Jy/beam ! Clean residual mean=0.000014 rms=0.004008 Jy/beam ! Combined flux in latest and established models = 0.230708 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.230708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104018Jy sigma=0.001068 ! Fit after self-cal, rms=0.104630Jy sigma=0.001060 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104630Jy sigma=0.001060 ! Fit after self-cal, rms=0.123479Jy sigma=0.001018 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=8.133 mas, bpa=-18.1 degrees ! Estimated noise=491.988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00071758 Jy ! Component: 100 - total flux cleaned = -0.000842287 Jy ! Component: 150 - total flux cleaned = -0.000950529 Jy ! Component: 200 - total flux cleaned = -0.00104733 Jy ! Total flux subtracted in 200 components = -0.00104733 Jy ! Clean residual min=-0.008703 max=0.014322 Jy/beam ! Clean residual mean=0.000007 rms=0.003187 Jy/beam ! Combined flux in latest and established models = 0.229661 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 81 components and 0.229661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122951Jy sigma=0.001016 ! Fit after self-cal, rms=0.123595Jy sigma=0.001012 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113483 Jy ! Component: 100 - total flux cleaned = 0.0113997 Jy ! Component: 150 - total flux cleaned = 0.0111415 Jy ! Component: 200 - total flux cleaned = 0.0111364 Jy ! Total flux subtracted in 200 components = 0.0111364 Jy ! Clean residual min=-0.008158 max=0.010832 Jy/beam ! Clean residual mean=-0.000000 rms=0.002781 Jy/beam ! Combined flux in latest and established models = 0.240797 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 101 components and 0.240797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120640Jy sigma=0.000983 ! Fit after self-cal, rms=0.120068Jy sigma=0.000976 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120068Jy sigma=0.000976 ! Fit after self-cal, rms=0.106389Jy sigma=0.000963 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=7.958 mas, bpa=-17.13 degrees ! Estimated noise=499.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00681413 Jy ! Component: 100 - total flux cleaned = 0.00832079 Jy ! Component: 150 - total flux cleaned = 0.00873413 Jy ! Component: 200 - total flux cleaned = 0.00938553 Jy ! Total flux subtracted in 200 components = 0.00938553 Jy ! Clean residual min=-0.006603 max=0.008931 Jy/beam ! Clean residual mean=0.000000 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.250183 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 115 components and 0.250183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104909Jy sigma=0.000941 ! Fit after self-cal, rms=0.104685Jy sigma=0.000937 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213477 Jy ! Component: 100 - total flux cleaned = 0.00263529 Jy ! Component: 150 - total flux cleaned = 0.00236121 Jy ! Component: 200 - total flux cleaned = 0.00164463 Jy ! Total flux subtracted in 200 components = 0.00164463 Jy ! Clean residual min=-0.006507 max=0.008298 Jy/beam ! Clean residual mean=-0.000001 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.251827 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 0.251827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103918Jy sigma=0.000927 ! Fit after self-cal, rms=0.103990Jy sigma=0.000924 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103990Jy sigma=0.000924 ! Fit after self-cal, rms=0.099055Jy sigma=0.000917 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=10.62 mas, bpa=-4.983 degrees ! Estimated noise=596.714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324652 Jy ! Component: 100 - total flux cleaned = 0.0044904 Jy ! Component: 150 - total flux cleaned = 0.00500596 Jy ! Component: 200 - total flux cleaned = 0.00544926 Jy ! Total flux subtracted in 200 components = 0.00544926 Jy ! Clean residual min=-0.008900 max=0.010230 Jy/beam ! Clean residual mean=0.000002 rms=0.002674 Jy/beam ! Combined flux in latest and established models = 0.257276 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 133 components and 0.257276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098582Jy sigma=0.000909 ! Fit after self-cal, rms=0.098700Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537862 Jy ! Component: 100 - total flux cleaned = 0.000739162 Jy ! Component: 150 - total flux cleaned = 0.000899777 Jy ! Component: 200 - total flux cleaned = 0.000975856 Jy ! Total flux subtracted in 200 components = 0.000975856 Jy ! Clean residual min=-0.008567 max=0.009809 Jy/beam ! Clean residual mean=0.000000 rms=0.002482 Jy/beam ! Combined flux in latest and established models = 0.258252 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 0.258252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098612Jy sigma=0.000904 ! Fit after self-cal, rms=0.098680Jy sigma=0.000903 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=7.815 mas, bpa=-16.48 degrees ! Estimated noise=504.181 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 7.815 at -16.48 degrees (North through East) ! Clean map min=-0.019888 max=0.084246 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=6.89 mas, bpa=-16.23 degrees ! Estimated noise=703.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695554 Jy ! Component: 100 - total flux cleaned = 0.111557 Jy ! Component: 150 - total flux cleaned = 0.140663 Jy ! Component: 200 - total flux cleaned = 0.16265 Jy ! Total flux subtracted in 200 components = 0.16265 Jy ! Clean residual min=-0.010759 max=0.016389 Jy/beam ! Clean residual mean=0.000026 rms=0.003729 Jy/beam ! Combined flux in latest and established models = 0.16265 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.16265 Jy ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=7.815 mas, bpa=-16.48 degrees ! Estimated noise=504.181 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028695 Jy ! Component: 100 - total flux cleaned = 0.0478892 Jy ! Component: 150 - total flux cleaned = 0.061502 Jy ! Component: 200 - total flux cleaned = 0.0695376 Jy ! Total flux subtracted in 200 components = 0.0695376 Jy ! Clean residual min=-0.010339 max=0.013942 Jy/beam ! Clean residual mean=0.000019 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 0.232188 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 82 components and 0.232188 Jy ! Inverting map ! Added new window around map position (-5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132365 Jy ! Component: 100 - total flux cleaned = 0.0182478 Jy ! Component: 150 - total flux cleaned = 0.0221362 Jy ! Component: 200 - total flux cleaned = 0.0243313 Jy ! Total flux subtracted in 200 components = 0.0243313 Jy ! Clean residual min=-0.007487 max=0.006819 Jy/beam ! Clean residual mean=0.000006 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.256519 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 123 components and 0.256519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=10.62 mas, bpa=-4.983 degrees ! Estimated noise=596.714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287605 Jy ! Component: 100 - total flux cleaned = 0.00409161 Jy ! Component: 150 - total flux cleaned = 0.00442495 Jy ! Component: 200 - total flux cleaned = 0.00443067 Jy ! Total flux subtracted in 200 components = 0.00443067 Jy ! Clean residual min=-0.007871 max=0.008007 Jy/beam ! Clean residual mean=0.000005 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.26095 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262338 Jy ! Component: 100 - total flux cleaned = -0.000380215 Jy ! Component: 150 - total flux cleaned = -0.000488107 Jy ! Component: 200 - total flux cleaned = -0.000596177 Jy ! Total flux subtracted in 200 components = -0.000596177 Jy ! Clean residual min=-0.007387 max=0.007221 Jy/beam ! Clean residual mean=0.000004 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 0.260354 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 163 components and 0.260354 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=7.815 mas, bpa=-16.48 degrees ! Estimated noise=504.181 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290672 Jy ! Component: 100 - total flux cleaned = -0.00053704 Jy ! Component: 150 - total flux cleaned = -0.000636844 Jy ! Component: 200 - total flux cleaned = -0.00072643 Jy ! Total flux subtracted in 200 components = -0.00072643 Jy ! Clean residual min=-0.005542 max=0.005110 Jy/beam ! Clean residual mean=0.000002 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.259627 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 187 components and 0.259627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098120Jy sigma=0.000891 ! Fit after self-cal, rms=0.097196Jy sigma=0.000886 wmodel J0643+0724_S_2014_01_04_pus_map.mod ! Writing 187 model components to file: J0643+0724_S_2014_01_04_pus_map.mod wobs J0643+0724_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0643+0724_S_2014_01_04_pus_uvs.fits wwins J0643+0724_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0643+0724_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110654 Jy ! Component: 100 - total flux cleaned = -0.00144797 Jy ! Component: 150 - total flux cleaned = -0.00145295 Jy ! Component: 200 - total flux cleaned = -0.00131391 Jy ! Component: 250 - total flux cleaned = -0.000979545 Jy ! Component: 300 - total flux cleaned = -0.000602462 Jy ! Component: 350 - total flux cleaned = -0.000483864 Jy ! Component: 400 - total flux cleaned = -0.000426015 Jy ! Component: 450 - total flux cleaned = -0.00031685 Jy ! Component: 500 - total flux cleaned = -0.00026449 Jy ! Component: 550 - total flux cleaned = -0.00016841 Jy ! Component: 600 - total flux cleaned = -0.000122659 Jy ! Component: 650 - total flux cleaned = -0.000168088 Jy ! Component: 700 - total flux cleaned = -3.81067e-05 Jy ! Component: 750 - total flux cleaned = 8.59926e-05 Jy ! Component: 800 - total flux cleaned = 0.000126981 Jy ! Component: 850 - total flux cleaned = 0.000242602 Jy ! Component: 900 - total flux cleaned = 0.000205714 Jy ! Component: 950 - total flux cleaned = 0.000349435 Jy ! Component: 1000 - total flux cleaned = 0.000419736 Jy ! Component: 1050 - total flux cleaned = 0.000521417 Jy ! Component: 1100 - total flux cleaned = 0.000587621 Jy ! Component: 1150 - total flux cleaned = 0.000715486 Jy ! Component: 1200 - total flux cleaned = 0.0007154 Jy ! Component: 1250 - total flux cleaned = 0.000805115 Jy ! Component: 1300 - total flux cleaned = 0.000775672 Jy ! Component: 1350 - total flux cleaned = 0.000804311 Jy ! Component: 1400 - total flux cleaned = 0.000776996 Jy ! Component: 1450 - total flux cleaned = 0.000858423 Jy ! Component: 1500 - total flux cleaned = 0.000831918 Jy ! Component: 1550 - total flux cleaned = 0.000934381 Jy ! Component: 1600 - total flux cleaned = 0.000833085 Jy ! Component: 1650 - total flux cleaned = 0.000857689 Jy ! Component: 1700 - total flux cleaned = 0.000810109 Jy ! Component: 1750 - total flux cleaned = 0.000833487 Jy ! Component: 1800 - total flux cleaned = 0.000879319 Jy ! Component: 1850 - total flux cleaned = 0.000856512 Jy ! Component: 1900 - total flux cleaned = 0.00085692 Jy ! Component: 1950 - total flux cleaned = 0.000856909 Jy ! Component: 2000 - total flux cleaned = 0.000815378 Jy ! Component: 2050 - total flux cleaned = 0.000856922 Jy ! Component: 2100 - total flux cleaned = 0.000897587 Jy ! Component: 2150 - total flux cleaned = 0.000857856 Jy ! Component: 2200 - total flux cleaned = 0.000896448 Jy ! Component: 2250 - total flux cleaned = 0.000857645 Jy ! Component: 2300 - total flux cleaned = 0.000838582 Jy ! Component: 2350 - total flux cleaned = 0.00076442 Jy ! Component: 2400 - total flux cleaned = 0.00078245 Jy ! Component: 2450 - total flux cleaned = 0.000710927 Jy ! Component: 2500 - total flux cleaned = 0.000623046 Jy ! Component: 2550 - total flux cleaned = 0.000657503 Jy ! Component: 2600 - total flux cleaned = 0.000573133 Jy ! Component: 2650 - total flux cleaned = 0.0006064 Jy ! Component: 2700 - total flux cleaned = 0.000540428 Jy ! Component: 2750 - total flux cleaned = 0.000556604 Jy ! Component: 2800 - total flux cleaned = 0.000556591 Jy ! Component: 2850 - total flux cleaned = 0.00060382 Jy ! Component: 2900 - total flux cleaned = 0.00057255 Jy ! Component: 2950 - total flux cleaned = 0.00060331 Jy ! Component: 3000 - total flux cleaned = 0.000648886 Jy ! Component: 3050 - total flux cleaned = 0.000663859 Jy ! Component: 3100 - total flux cleaned = 0.000723146 Jy ! Component: 3150 - total flux cleaned = 0.000781518 Jy ! Component: 3200 - total flux cleaned = 0.000796058 Jy ! Component: 3250 - total flux cleaned = 0.000853286 Jy ! Component: 3300 - total flux cleaned = 0.000895637 Jy ! Component: 3350 - total flux cleaned = 0.000909648 Jy ! Component: 3400 - total flux cleaned = 0.000978657 Jy ! Component: 3450 - total flux cleaned = 0.00103322 Jy ! Component: 3500 - total flux cleaned = 0.00101963 Jy ! Component: 3550 - total flux cleaned = 0.00105982 Jy ! Component: 3600 - total flux cleaned = 0.00104659 Jy ! Component: 3650 - total flux cleaned = 0.00111198 Jy ! Component: 3700 - total flux cleaned = 0.00108587 Jy ! Component: 3750 - total flux cleaned = 0.00109878 Jy ! Component: 3800 - total flux cleaned = 0.00113708 Jy ! Component: 3850 - total flux cleaned = 0.00116232 Jy ! Component: 3900 - total flux cleaned = 0.00117503 Jy ! Component: 3950 - total flux cleaned = 0.00127425 Jy ! Component: 4000 - total flux cleaned = 0.00133556 Jy ! Component: 4050 - total flux cleaned = 0.00134771 Jy ! Total flux subtracted in 4096 components = 0.00142045 Jy ! Clean residual min=-0.000683 max=0.000748 Jy/beam ! Clean residual mean=0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.261048 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 497 components and 0.261047 Jy ![Exited script file: muppet] wmap "J0643+0724_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 7.815 at -16.48 degrees (North through East) ! Clean map min=-0.010104 max=0.081727 Jy/beam ! Writing clean map to FITS file: J0643+0724_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0817267 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000215298 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.79031 0.79031 1.58062 3.16124 6.32248 12.645 25.2899 50.5799 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.794 x 7.815 at -16.48 degrees (North through East) ! Clean map min=-0.010104 max=0.081727 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0643+0724_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:11 2017