! Started logfile: J0639+7324_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:19:01 2017 obs J0639+7324_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0639+7324_S_2014_01_04_pus_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.416667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0639+7324 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 1800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0639+7324_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.659151Jy sigma=0.009123 ! Fit after self-cal, rms=0.593662Jy sigma=0.008166 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=18.9 mas, bpa=53.99 degrees ! Estimated noise=1781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.3086 Jy ! Component: 100 - total flux cleaned = 0.383173 Jy ! Total flux subtracted in 100 components = 0.383173 Jy ! Clean residual min=-0.033553 max=0.034501 Jy/beam ! Clean residual mean=-0.000134 rms=0.010918 Jy/beam ! Combined flux in latest and established models = 0.383173 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.383173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137968Jy sigma=0.001640 ! Fit after self-cal, rms=0.138462Jy sigma=0.001638 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=18.02 mas, bpa=53.62 degrees ! Estimated noise=1288.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611727 Jy ! Component: 100 - total flux cleaned = 0.101861 Jy ! Component: 150 - total flux cleaned = 0.130632 Jy ! Component: 200 - total flux cleaned = 0.151752 Jy ! Total flux subtracted in 200 components = 0.151752 Jy ! Clean residual min=-0.018992 max=0.016244 Jy/beam ! Clean residual mean=-0.000149 rms=0.006145 Jy/beam ! Combined flux in latest and established models = 0.534925 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 66 components and 0.534925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094711Jy sigma=0.001119 ! Fit after self-cal, rms=0.094275Jy sigma=0.001111 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.01 ! MK 1.01 NL 0.98 OV 0.94 PT 1.01 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.97 ! MK 1.02 NL 1.04 OV 0.98 PT 0.97 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* KP 1.00* LA 0.79 ! MK 1.05 NL 1.00 OV 0.92 PT 0.92 ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.87 ! MK 1.01 NL 1.07 OV 0.97 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.094275Jy sigma=0.001111 ! Fit after self-cal, rms=0.074760Jy sigma=0.000953 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=18.06 mas, bpa=53.75 degrees ! Estimated noise=1258.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128428 Jy ! Component: 100 - total flux cleaned = 0.0196471 Jy ! Component: 150 - total flux cleaned = 0.0247681 Jy ! Component: 200 - total flux cleaned = 0.0288678 Jy ! Total flux subtracted in 200 components = 0.0288678 Jy ! Clean residual min=-0.005537 max=0.006854 Jy/beam ! Clean residual mean=-0.000034 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.563792 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 96 components and 0.563792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072244Jy sigma=0.000922 ! Fit after self-cal, rms=0.072013Jy sigma=0.000921 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072013Jy sigma=0.000921 ! Fit after self-cal, rms=0.071812Jy sigma=0.000920 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.524 mas, bmaj=18.06 mas, bpa=53.76 degrees ! Estimated noise=1258.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375662 Jy ! Component: 100 - total flux cleaned = 0.0058761 Jy ! Component: 150 - total flux cleaned = 0.00720848 Jy ! Component: 200 - total flux cleaned = 0.00830444 Jy ! Total flux subtracted in 200 components = 0.00830444 Jy ! Clean residual min=-0.004597 max=0.005331 Jy/beam ! Clean residual mean=-0.000011 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.572097 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 117 components and 0.572097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071478Jy sigma=0.000916 ! Fit after self-cal, rms=0.071478Jy sigma=0.000916 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102115 Jy ! Component: 100 - total flux cleaned = 0.00164708 Jy ! Component: 150 - total flux cleaned = 0.0020285 Jy ! Component: 200 - total flux cleaned = 0.00220279 Jy ! Total flux subtracted in 200 components = 0.00220279 Jy ! Clean residual min=-0.004357 max=0.004854 Jy/beam ! Clean residual mean=-0.000008 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.5743 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.574299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071350Jy sigma=0.000914 ! Fit after self-cal, rms=0.071359Jy sigma=0.000914 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071359Jy sigma=0.000914 ! Fit after self-cal, rms=0.071379Jy sigma=0.000914 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.525 mas, bmaj=18.06 mas, bpa=53.76 degrees ! Estimated noise=1259.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000949565 Jy ! Component: 100 - total flux cleaned = 0.000949147 Jy ! Component: 150 - total flux cleaned = 0.00100236 Jy ! Component: 200 - total flux cleaned = 0.0010528 Jy ! Total flux subtracted in 200 components = 0.0010528 Jy ! Clean residual min=-0.004168 max=0.004361 Jy/beam ! Clean residual mean=-0.000006 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.575352 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 134 components and 0.575352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071291Jy sigma=0.000913 ! Fit after self-cal, rms=0.071300Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.66941e-05 Jy ! Component: 100 - total flux cleaned = 9.54744e-05 Jy ! Component: 150 - total flux cleaned = 0.00013867 Jy ! Component: 200 - total flux cleaned = 0.000178829 Jy ! Total flux subtracted in 200 components = 0.000178829 Jy ! Clean residual min=-0.004086 max=0.004021 Jy/beam ! Clean residual mean=-0.000005 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.575531 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 141 components and 0.575531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071244Jy sigma=0.000913 ! Fit after self-cal, rms=0.071251Jy sigma=0.000913 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071251Jy sigma=0.000913 ! Fit after self-cal, rms=0.071266Jy sigma=0.000913 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.075 mas, bmaj=17.35 mas, bpa=48.95 degrees ! Estimated noise=1422.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.19031e-05 Jy ! Component: 100 - total flux cleaned = 2.48368e-05 Jy ! Component: 150 - total flux cleaned = 0.000123985 Jy ! Component: 200 - total flux cleaned = 0.000185888 Jy ! Total flux subtracted in 200 components = 0.000185888 Jy ! Clean residual min=-0.004406 max=0.004225 Jy/beam ! Clean residual mean=-0.000007 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.575717 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 150 components and 0.575717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071248Jy sigma=0.000913 ! Fit after self-cal, rms=0.071253Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88693e-05 Jy ! Component: 100 - total flux cleaned = 9.50334e-05 Jy ! Component: 150 - total flux cleaned = 0.000173555 Jy ! Component: 200 - total flux cleaned = 0.000223815 Jy ! Total flux subtracted in 200 components = 0.000223815 Jy ! Clean residual min=-0.004238 max=0.003944 Jy/beam ! Clean residual mean=-0.000007 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 0.575941 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 165 components and 0.575941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071247Jy sigma=0.000912 ! Fit after self-cal, rms=0.071244Jy sigma=0.000912 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=18.06 mas, bpa=53.76 degrees ! Estimated noise=1259.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 18.06 at 53.76 degrees (North through East) ! Clean map min=-0.0037203 max=0.40284 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=18.93 mas, bpa=54.18 degrees ! Estimated noise=1753.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303641 Jy ! Component: 100 - total flux cleaned = 0.377755 Jy ! Component: 150 - total flux cleaned = 0.416662 Jy ! Component: 200 - total flux cleaned = 0.443426 Jy ! Total flux subtracted in 200 components = 0.443426 Jy ! Clean residual min=-0.017833 max=0.018123 Jy/beam ! Clean residual mean=-0.000093 rms=0.006093 Jy/beam ! Combined flux in latest and established models = 0.443426 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.443426 Jy ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=18.06 mas, bpa=53.76 degrees ! Estimated noise=1259.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319026 Jy ! Component: 100 - total flux cleaned = 0.0536338 Jy ! Component: 150 - total flux cleaned = 0.0691362 Jy ! Component: 200 - total flux cleaned = 0.0806181 Jy ! Total flux subtracted in 200 components = 0.0806181 Jy ! Clean residual min=-0.009920 max=0.010085 Jy/beam ! Clean residual mean=-0.000088 rms=0.003102 Jy/beam ! Combined flux in latest and established models = 0.524044 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.524044 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.075 mas, bmaj=17.35 mas, bpa=48.95 degrees ! Estimated noise=1422.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124784 Jy ! Component: 100 - total flux cleaned = 0.0200873 Jy ! Component: 150 - total flux cleaned = 0.0257648 Jy ! Component: 200 - total flux cleaned = 0.0302146 Jy ! Total flux subtracted in 200 components = 0.0302146 Jy ! Clean residual min=-0.006240 max=0.005250 Jy/beam ! Clean residual mean=-0.000061 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.554259 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353775 Jy ! Component: 100 - total flux cleaned = 0.00638548 Jy ! Component: 150 - total flux cleaned = 0.00873093 Jy ! Component: 200 - total flux cleaned = 0.0106963 Jy ! Total flux subtracted in 200 components = 0.0106963 Jy ! Clean residual min=-0.004925 max=0.003849 Jy/beam ! Clean residual mean=-0.000034 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.564955 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 137 components and 0.564955 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=18.06 mas, bpa=53.76 degrees ! Estimated noise=1259.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937707 Jy ! Component: 100 - total flux cleaned = 0.00222789 Jy ! Component: 150 - total flux cleaned = 0.00310079 Jy ! Component: 200 - total flux cleaned = 0.00385539 Jy ! Total flux subtracted in 200 components = 0.00385539 Jy ! Clean residual min=-0.003449 max=0.004286 Jy/beam ! Clean residual mean=-0.000014 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.56881 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 152 components and 0.568811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071475Jy sigma=0.000914 ! Fit after self-cal, rms=0.071476Jy sigma=0.000914 wmodel J0639+7324_S_2014_01_04_pus_map.mod ! Writing 152 model components to file: J0639+7324_S_2014_01_04_pus_map.mod wobs J0639+7324_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0639+7324_S_2014_01_04_pus_uvs.fits wwins J0639+7324_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0639+7324_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124999 Jy ! Component: 100 - total flux cleaned = 0.000951215 Jy ! Component: 150 - total flux cleaned = 0.00100454 Jy ! Component: 200 - total flux cleaned = 0.00125748 Jy ! Component: 250 - total flux cleaned = 0.00154532 Jy ! Component: 300 - total flux cleaned = 0.00172567 Jy ! Component: 350 - total flux cleaned = 0.00189648 Jy ! Component: 400 - total flux cleaned = 0.0019781 Jy ! Component: 450 - total flux cleaned = 0.0020565 Jy ! Component: 500 - total flux cleaned = 0.00212991 Jy ! Component: 550 - total flux cleaned = 0.00216447 Jy ! Component: 600 - total flux cleaned = 0.00219696 Jy ! Component: 650 - total flux cleaned = 0.00219744 Jy ! Component: 700 - total flux cleaned = 0.00232204 Jy ! Component: 750 - total flux cleaned = 0.00247039 Jy ! Component: 800 - total flux cleaned = 0.00255581 Jy ! Component: 850 - total flux cleaned = 0.00263926 Jy ! Component: 900 - total flux cleaned = 0.00274653 Jy ! Component: 950 - total flux cleaned = 0.00287578 Jy ! Component: 1000 - total flux cleaned = 0.00302731 Jy ! Component: 1050 - total flux cleaned = 0.00317499 Jy ! Component: 1100 - total flux cleaned = 0.00341522 Jy ! Component: 1150 - total flux cleaned = 0.00360245 Jy ! Component: 1200 - total flux cleaned = 0.00378526 Jy ! Component: 1250 - total flux cleaned = 0.00394145 Jy ! Component: 1300 - total flux cleaned = 0.00405052 Jy ! Component: 1350 - total flux cleaned = 0.00415738 Jy ! Component: 1400 - total flux cleaned = 0.00424128 Jy ! Component: 1450 - total flux cleaned = 0.0043649 Jy ! Component: 1500 - total flux cleaned = 0.00440532 Jy ! Component: 1550 - total flux cleaned = 0.00450499 Jy ! Component: 1600 - total flux cleaned = 0.00452438 Jy ! Component: 1650 - total flux cleaned = 0.00458248 Jy ! Component: 1700 - total flux cleaned = 0.00463999 Jy ! Component: 1750 - total flux cleaned = 0.00473453 Jy ! Component: 1800 - total flux cleaned = 0.00480898 Jy ! Component: 1850 - total flux cleaned = 0.00488244 Jy ! Component: 1900 - total flux cleaned = 0.00491888 Jy ! Component: 1950 - total flux cleaned = 0.00495477 Jy ! Component: 2000 - total flux cleaned = 0.00499022 Jy ! Component: 2050 - total flux cleaned = 0.00500772 Jy ! Component: 2100 - total flux cleaned = 0.00502506 Jy ! Component: 2150 - total flux cleaned = 0.00500806 Jy ! Component: 2200 - total flux cleaned = 0.00505906 Jy ! Component: 2250 - total flux cleaned = 0.0050759 Jy ! Component: 2300 - total flux cleaned = 0.00512594 Jy ! Component: 2350 - total flux cleaned = 0.00512579 Jy ! Component: 2400 - total flux cleaned = 0.00512584 Jy ! Component: 2450 - total flux cleaned = 0.00515849 Jy ! Component: 2500 - total flux cleaned = 0.00519108 Jy ! Component: 2550 - total flux cleaned = 0.00522342 Jy ! Component: 2600 - total flux cleaned = 0.00530357 Jy ! Component: 2650 - total flux cleaned = 0.00535147 Jy ! Component: 2700 - total flux cleaned = 0.00533563 Jy ! Component: 2750 - total flux cleaned = 0.00539904 Jy ! Component: 2800 - total flux cleaned = 0.00546207 Jy ! Component: 2850 - total flux cleaned = 0.00547779 Jy ! Component: 2900 - total flux cleaned = 0.00552498 Jy ! Component: 2950 - total flux cleaned = 0.0055565 Jy ! Component: 3000 - total flux cleaned = 0.00561947 Jy ! Component: 3050 - total flux cleaned = 0.0056666 Jy ! Component: 3100 - total flux cleaned = 0.00571373 Jy ! Component: 3150 - total flux cleaned = 0.00576092 Jy ! Component: 3200 - total flux cleaned = 0.00580822 Jy ! Component: 3250 - total flux cleaned = 0.00587111 Jy ! Component: 3300 - total flux cleaned = 0.00591864 Jy ! Component: 3350 - total flux cleaned = 0.00596598 Jy ! Component: 3400 - total flux cleaned = 0.00601342 Jy ! Component: 3450 - total flux cleaned = 0.00607668 Jy ! Component: 3500 - total flux cleaned = 0.00610846 Jy ! Component: 3550 - total flux cleaned = 0.00614016 Jy ! Component: 3600 - total flux cleaned = 0.00620378 Jy ! Component: 3650 - total flux cleaned = 0.00625178 Jy ! Component: 3700 - total flux cleaned = 0.0063161 Jy ! Component: 3750 - total flux cleaned = 0.00636451 Jy ! Component: 3800 - total flux cleaned = 0.00641316 Jy ! Component: 3850 - total flux cleaned = 0.00646209 Jy ! Component: 3900 - total flux cleaned = 0.00649505 Jy ! Component: 3950 - total flux cleaned = 0.0065446 Jy ! Component: 4000 - total flux cleaned = 0.00656132 Jy ! Component: 4050 - total flux cleaned = 0.00656149 Jy ! Total flux subtracted in 4096 components = 0.00657826 Jy ! Clean residual min=-0.000943 max=0.001120 Jy/beam ! Clean residual mean=0.000003 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.575389 Jy keep ! Adding 215 model components to the UV plane model. ! The established model now contains 367 components and 0.575389 Jy ![Exited script file: muppet] wmap "J0639+7324_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 18.06 at 53.76 degrees (North through East) ! Clean map min=-0.0025206 max=0.40813 Jy/beam ! Writing clean map to FITS file: J0639+7324_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.408125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000313852 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.230703 0.230703 0.461405 0.92281 1.84562 3.69124 7.38248 14.765 29.5299 59.0598 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.408 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.527 x 18.06 at 53.76 degrees (North through East) ! Clean map min=-0.0025206 max=0.40813 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0639+7324_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:06 2017