! Started logfile: J0638-0845_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:55 2017 obs J0638-0845_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0638-0845_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.7102 visibilities/baseline/integration-bin. ! Found source: J0638-0845 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 15596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0638-0845_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 202 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993813Jy sigma=0.010817 ! Fit after self-cal, rms=0.950442Jy sigma=0.010434 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=6.709 mas, bpa=1.636 degrees ! Estimated noise=932.335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444504 Jy ! Component: 100 - total flux cleaned = 0.0546992 Jy ! Total flux subtracted in 100 components = 0.0546992 Jy ! Clean residual min=-0.003882 max=0.004849 Jy/beam ! Clean residual mean=-0.000002 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.0546992 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0546992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166863Jy sigma=0.000789 ! Fit after self-cal, rms=0.166743Jy sigma=0.000785 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.753 mas, bpa=2.896 degrees ! Estimated noise=563.885 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386521 Jy ! Component: 100 - total flux cleaned = 0.00561285 Jy ! Component: 150 - total flux cleaned = 0.0057838 Jy ! Component: 200 - total flux cleaned = 0.00581856 Jy ! Total flux subtracted in 200 components = 0.00581856 Jy ! Clean residual min=-0.003537 max=0.003817 Jy/beam ! Clean residual mean=0.000003 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.0605178 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.0605178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166447Jy sigma=0.000784 ! Fit after self-cal, rms=0.166432Jy sigma=0.000784 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.97 KP 1.03 ! LA 1.25 MK 1.02 NL 1.01 OV 1.00 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.23 HN 0.91 KP 1.02 ! LA 1.16 MK 1.12 NL 1.11 OV 0.98 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 0.98 KP 0.90 ! LA 1.03 MK 1.11 NL 1.46 OV 0.96 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.93 KP 0.82 ! LA 0.96 MK 0.99 NL 1.06 OV 0.83 ! PT 1.06 SC 1.08 ! ! ! Fit before self-cal, rms=0.166432Jy sigma=0.000784 ! Fit after self-cal, rms=0.083322Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.804 mas, bpa=3.356 degrees ! Estimated noise=566.716 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000525135 Jy ! Component: 100 - total flux cleaned = 0.000480155 Jy ! Component: 150 - total flux cleaned = 0.000462309 Jy ! Component: 200 - total flux cleaned = 0.000447752 Jy ! Total flux subtracted in 200 components = 0.000447752 Jy ! Clean residual min=-0.002114 max=0.002562 Jy/beam ! Clean residual mean=0.000004 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.0609655 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0609655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083304Jy sigma=0.000777 ! Fit after self-cal, rms=0.083201Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083201Jy sigma=0.000776 ! Fit after self-cal, rms=0.081331Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.846 mas, bpa=3.497 degrees ! Estimated noise=565.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.38283e-05 Jy ! Component: 100 - total flux cleaned = -3.44532e-06 Jy ! Component: 150 - total flux cleaned = -2.7671e-05 Jy ! Component: 200 - total flux cleaned = -5.02089e-05 Jy ! Total flux subtracted in 200 components = -5.02089e-05 Jy ! Clean residual min=-0.001782 max=0.001900 Jy/beam ! Clean residual mean=0.000003 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0609153 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0609153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081324Jy sigma=0.000772 ! Fit after self-cal, rms=0.081334Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47.5, -63.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123982 Jy ! Component: 100 - total flux cleaned = 0.0015667 Jy ! Component: 150 - total flux cleaned = 0.00157013 Jy ! Component: 200 - total flux cleaned = 0.00149268 Jy ! Total flux subtracted in 200 components = 0.00149268 Jy ! Clean residual min=-0.001568 max=0.001586 Jy/beam ! Clean residual mean=0.000004 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.062408 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.062408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081299Jy sigma=0.000772 ! Fit after self-cal, rms=0.081301Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081301Jy sigma=0.000772 ! Fit after self-cal, rms=0.081355Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=7.841 mas, bpa=3.407 degrees ! Estimated noise=565.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000600418 Jy ! Component: 100 - total flux cleaned = 0.000534438 Jy ! Component: 150 - total flux cleaned = 0.000435879 Jy ! Component: 200 - total flux cleaned = 0.000366309 Jy ! Total flux subtracted in 200 components = 0.000366309 Jy ! Clean residual min=-0.001632 max=0.001482 Jy/beam ! Clean residual mean=0.000003 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0627743 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0627743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081340Jy sigma=0.000771 ! Fit after self-cal, rms=0.081352Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108164 Jy ! Component: 100 - total flux cleaned = 9.09371e-05 Jy ! Component: 150 - total flux cleaned = 4.67773e-05 Jy ! Component: 200 - total flux cleaned = 7.37379e-06 Jy ! Total flux subtracted in 200 components = 7.37379e-06 Jy ! Clean residual min=-0.001576 max=0.001465 Jy/beam ! Clean residual mean=0.000003 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0627817 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 57 components and 0.0627817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081345Jy sigma=0.000771 ! Fit after self-cal, rms=0.081347Jy sigma=0.000771 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081347Jy sigma=0.000771 ! Fit after self-cal, rms=0.081338Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.979 mas, bmaj=12.96 mas, bpa=3.856 degrees ! Estimated noise=724.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353357 Jy ! Component: 100 - total flux cleaned = -0.000420063 Jy ! Component: 150 - total flux cleaned = -0.000456117 Jy ! Component: 200 - total flux cleaned = -0.000478204 Jy ! Total flux subtracted in 200 components = -0.000478204 Jy ! Clean residual min=-0.001515 max=0.001655 Jy/beam ! Clean residual mean=0.000006 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0623035 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.0623035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081339Jy sigma=0.000771 ! Fit after self-cal, rms=0.081344Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.32878e-05 Jy ! Component: 100 - total flux cleaned = -9.43968e-05 Jy ! Component: 150 - total flux cleaned = -0.000126891 Jy ! Component: 200 - total flux cleaned = -0.000137553 Jy ! Total flux subtracted in 200 components = -0.000137553 Jy ! Clean residual min=-0.001498 max=0.001674 Jy/beam ! Clean residual mean=0.000006 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.062166 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.062166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081345Jy sigma=0.000771 ! Fit after self-cal, rms=0.081347Jy sigma=0.000771 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=7.837 mas, bpa=3.302 degrees ! Estimated noise=565.451 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 7.837 at 3.302 degrees (North through East) ! Clean map min=-0.0015684 max=0.057771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=6.823 mas, bpa=2.004 degrees ! Estimated noise=918.324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440354 Jy ! Component: 100 - total flux cleaned = 0.0544651 Jy ! Component: 150 - total flux cleaned = 0.0584757 Jy ! Component: 200 - total flux cleaned = 0.0606547 Jy ! Total flux subtracted in 200 components = 0.0606547 Jy ! Clean residual min=-0.003434 max=0.003168 Jy/beam ! Clean residual mean=0.000001 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.0606547 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0606547 Jy ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=7.837 mas, bpa=3.302 degrees ! Estimated noise=565.451 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228633 Jy ! Component: 100 - total flux cleaned = 0.00313606 Jy ! Component: 150 - total flux cleaned = 0.00321122 Jy ! Component: 200 - total flux cleaned = 0.00312024 Jy ! Total flux subtracted in 200 components = 0.00312024 Jy ! Clean residual min=-0.001852 max=0.001650 Jy/beam ! Clean residual mean=0.000003 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.063775 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.063775 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.979 mas, bmaj=12.96 mas, bpa=3.856 degrees ! Estimated noise=724.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000783001 Jy ! Component: 100 - total flux cleaned = -0.000983319 Jy ! Component: 150 - total flux cleaned = -0.00104542 Jy ! Component: 200 - total flux cleaned = -0.00108939 Jy ! Total flux subtracted in 200 components = -0.00108939 Jy ! Clean residual min=-0.001535 max=0.001684 Jy/beam ! Clean residual mean=0.000006 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0626856 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.21523e-05 Jy ! Component: 100 - total flux cleaned = -9.60514e-05 Jy ! Component: 150 - total flux cleaned = -0.000146859 Jy ! Component: 200 - total flux cleaned = -0.000182856 Jy ! Total flux subtracted in 200 components = -0.000182856 Jy ! Clean residual min=-0.001495 max=0.001682 Jy/beam ! Clean residual mean=0.000006 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0625027 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.0625027 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=7.837 mas, bpa=3.302 degrees ! Estimated noise=565.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549865 Jy ! Component: 100 - total flux cleaned = 0.000526612 Jy ! Component: 150 - total flux cleaned = 0.000461827 Jy ! Component: 200 - total flux cleaned = 0.000442047 Jy ! Total flux subtracted in 200 components = 0.000442047 Jy ! Clean residual min=-0.001784 max=0.001554 Jy/beam ! Clean residual mean=0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0629448 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.0629448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081363Jy sigma=0.000771 ! Fit after self-cal, rms=0.081361Jy sigma=0.000771 wmodel J0638-0845_S_2015_01_23_pus_map.mod ! Writing 63 model components to file: J0638-0845_S_2015_01_23_pus_map.mod wobs J0638-0845_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0638-0845_S_2015_01_23_pus_uvs.fits wwins J0638-0845_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0638-0845_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436281 Jy ! Component: 100 - total flux cleaned = -0.000517058 Jy ! Component: 150 - total flux cleaned = -0.000416512 Jy ! Component: 200 - total flux cleaned = -0.000320763 Jy ! Component: 250 - total flux cleaned = -0.000274471 Jy ! Component: 300 - total flux cleaned = -0.000230147 Jy ! Component: 350 - total flux cleaned = -0.000230203 Jy ! Component: 400 - total flux cleaned = -0.000250542 Jy ! Component: 450 - total flux cleaned = -0.00021013 Jy ! Component: 500 - total flux cleaned = -0.000229535 Jy ! Component: 550 - total flux cleaned = -0.000267202 Jy ! Component: 600 - total flux cleaned = -0.00024874 Jy ! Component: 650 - total flux cleaned = -0.000303106 Jy ! Component: 700 - total flux cleaned = -0.0002327 Jy ! Component: 750 - total flux cleaned = -0.00019865 Jy ! Component: 800 - total flux cleaned = -0.000165164 Jy ! Component: 850 - total flux cleaned = -0.000132187 Jy ! Component: 900 - total flux cleaned = -0.000115839 Jy ! Component: 950 - total flux cleaned = -8.41255e-05 Jy ! Component: 1000 - total flux cleaned = -8.39705e-05 Jy ! Component: 1050 - total flux cleaned = -3.76805e-05 Jy ! Component: 1100 - total flux cleaned = 2.30059e-05 Jy ! Component: 1150 - total flux cleaned = 9.74645e-05 Jy ! Component: 1200 - total flux cleaned = 0.000199998 Jy ! Component: 1250 - total flux cleaned = 0.000272376 Jy ! Component: 1300 - total flux cleaned = 0.000372027 Jy ! Component: 1350 - total flux cleaned = 0.000470434 Jy ! Component: 1400 - total flux cleaned = 0.000539804 Jy ! Component: 1450 - total flux cleaned = 0.000676628 Jy ! Component: 1500 - total flux cleaned = 0.000757653 Jy ! Component: 1550 - total flux cleaned = 0.000851057 Jy ! Component: 1600 - total flux cleaned = 0.000903831 Jy ! Component: 1650 - total flux cleaned = 0.000995098 Jy ! Component: 1700 - total flux cleaned = 0.00107227 Jy ! Component: 1750 - total flux cleaned = 0.0011611 Jy ! Component: 1800 - total flux cleaned = 0.0012364 Jy ! Component: 1850 - total flux cleaned = 0.00124877 Jy ! Component: 1900 - total flux cleaned = 0.00129763 Jy ! Component: 1950 - total flux cleaned = 0.00133391 Jy ! Component: 2000 - total flux cleaned = 0.00131006 Jy ! Component: 2050 - total flux cleaned = 0.00139303 Jy ! Component: 2100 - total flux cleaned = 0.00140483 Jy ! Component: 2150 - total flux cleaned = 0.00139326 Jy ! Component: 2200 - total flux cleaned = 0.001462 Jy ! Component: 2250 - total flux cleaned = 0.0014505 Jy ! Component: 2300 - total flux cleaned = 0.00148447 Jy ! Component: 2350 - total flux cleaned = 0.00156258 Jy ! Component: 2400 - total flux cleaned = 0.00158482 Jy ! Component: 2450 - total flux cleaned = 0.00161761 Jy ! Component: 2500 - total flux cleaned = 0.00167168 Jy ! Component: 2550 - total flux cleaned = 0.00170389 Jy ! Component: 2600 - total flux cleaned = 0.00170391 Jy ! Component: 2650 - total flux cleaned = 0.00173557 Jy ! Component: 2700 - total flux cleaned = 0.00176689 Jy ! Component: 2750 - total flux cleaned = 0.00179786 Jy ! Component: 2800 - total flux cleaned = 0.00183891 Jy ! Component: 2850 - total flux cleaned = 0.00181857 Jy ! Component: 2900 - total flux cleaned = 0.00185896 Jy ! Component: 2950 - total flux cleaned = 0.00190914 Jy ! Component: 3000 - total flux cleaned = 0.00192915 Jy ! Component: 3050 - total flux cleaned = 0.00195891 Jy ! Component: 3100 - total flux cleaned = 0.00200799 Jy ! Component: 3150 - total flux cleaned = 0.00200793 Jy ! Component: 3200 - total flux cleaned = 0.00208533 Jy ! Component: 3250 - total flux cleaned = 0.00208535 Jy ! Component: 3300 - total flux cleaned = 0.00213305 Jy ! Component: 3350 - total flux cleaned = 0.00216147 Jy ! Component: 3400 - total flux cleaned = 0.00218966 Jy ! Component: 3450 - total flux cleaned = 0.00221762 Jy ! Component: 3500 - total flux cleaned = 0.00224545 Jy ! Component: 3550 - total flux cleaned = 0.00228231 Jy ! Component: 3600 - total flux cleaned = 0.00230978 Jy ! Component: 3650 - total flux cleaned = 0.00236437 Jy ! Component: 3700 - total flux cleaned = 0.0024004 Jy ! Component: 3750 - total flux cleaned = 0.00239145 Jy ! Component: 3800 - total flux cleaned = 0.00245399 Jy ! Component: 3850 - total flux cleaned = 0.00248938 Jy ! Component: 3900 - total flux cleaned = 0.00250702 Jy ! Component: 3950 - total flux cleaned = 0.0025333 Jy ! Component: 4000 - total flux cleaned = 0.00258542 Jy ! Component: 4050 - total flux cleaned = 0.00261997 Jy ! Total flux subtracted in 4096 components = 0.00262854 Jy ! Clean residual min=-0.000469 max=0.000542 Jy/beam ! Clean residual mean=0.000002 rms=0.000156 Jy/beam ! Combined flux in latest and established models = 0.0655733 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 353 components and 0.0655733 Jy ![Exited script file: muppet] wmap "J0638-0845_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 7.837 at 3.302 degrees (North through East) ! Clean map min=-0.0011251 max=0.05746 Jy/beam ! Writing clean map to FITS file: J0638-0845_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0574598 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000154445 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.806363 0.806363 1.61273 3.22545 6.4509 12.9018 25.8036 51.6072 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.244 x 7.837 at 3.302 degrees (North through East) ! Clean map min=-0.0011251 max=0.05746 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0638-0845_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:09:00 2017