! Started logfile: J0636-0547_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:45 2017 obs J0636-0547_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0636-0547_S_2015_01_23_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.749808 visibilities/baseline/integration-bin. ! Found source: J0636-0547 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 7828 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0636-0547_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.893813Jy sigma=0.008534 ! Fit after self-cal, rms=0.847836Jy sigma=0.008351 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=6.765 mas, bpa=3.013 degrees ! Estimated noise=1047.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137507 Jy ! Component: 100 - total flux cleaned = 0.170575 Jy ! Total flux subtracted in 100 components = 0.170575 Jy ! Clean residual min=-0.014637 max=0.015823 Jy/beam ! Clean residual mean=0.000009 rms=0.003646 Jy/beam ! Combined flux in latest and established models = 0.170575 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.170575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171280Jy sigma=0.000964 ! Fit after self-cal, rms=0.171224Jy sigma=0.000964 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.305 mas, bmaj=7.751 mas, bpa=2.395 degrees ! Estimated noise=843.644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116472 Jy ! Component: 100 - total flux cleaned = 0.0160604 Jy ! Component: 150 - total flux cleaned = 0.0159169 Jy ! Component: 200 - total flux cleaned = 0.0158054 Jy ! Total flux subtracted in 200 components = 0.0158054 Jy ! Clean residual min=-0.012814 max=0.017923 Jy/beam ! Clean residual mean=-0.000009 rms=0.003711 Jy/beam ! Combined flux in latest and established models = 0.186381 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.186381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170844Jy sigma=0.000944 ! Fit after self-cal, rms=0.170822Jy sigma=0.000943 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 2.02 HN 0.88 KP 0.98 ! LA 1.78 MK 0.99 NL 0.89 OV 0.87 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 2.38 HN 0.98 KP 0.88 ! LA 1.74 MK 1.05 NL 1.04 OV 0.88 ! PT 0.86 SC 1.06 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 2.33 HN 0.97 KP 0.77 ! LA 1.43 MK 1.05 NL 1.20 OV 0.83 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 2.10 HN 0.92 KP 0.73 ! LA 1.36 MK 1.00 NL 0.90 OV 0.89 ! PT 0.92 SC 0.98 ! ! ! Fit before self-cal, rms=0.170822Jy sigma=0.000943 ! Fit after self-cal, rms=0.360644Jy sigma=0.000807 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.712 mas, bpa=2.214 degrees ! Estimated noise=846.449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397266 Jy ! Component: 100 - total flux cleaned = 0.00581393 Jy ! Component: 150 - total flux cleaned = 0.00617786 Jy ! Component: 200 - total flux cleaned = 0.00639663 Jy ! Total flux subtracted in 200 components = 0.00639663 Jy ! Clean residual min=-0.005152 max=0.005096 Jy/beam ! Clean residual mean=0.000002 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.192777 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.192777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360335Jy sigma=0.000806 ! Fit after self-cal, rms=0.361764Jy sigma=0.000804 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361764Jy sigma=0.000804 ! Fit after self-cal, rms=0.222304Jy sigma=0.000789 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=7.684 mas, bpa=2.199 degrees ! Estimated noise=846.325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185803 Jy ! Component: 100 - total flux cleaned = 0.00203881 Jy ! Component: 150 - total flux cleaned = 0.00214562 Jy ! Component: 200 - total flux cleaned = 0.00228971 Jy ! Total flux subtracted in 200 components = 0.00228971 Jy ! Clean residual min=-0.003204 max=0.004148 Jy/beam ! Clean residual mean=0.000000 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.195067 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.195067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222243Jy sigma=0.000788 ! Fit after self-cal, rms=0.222371Jy sigma=0.000788 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367384 Jy ! Component: 100 - total flux cleaned = 0.00384951 Jy ! Component: 150 - total flux cleaned = 0.00369104 Jy ! Component: 200 - total flux cleaned = 0.00337537 Jy ! Total flux subtracted in 200 components = 0.00337537 Jy ! Clean residual min=-0.003044 max=0.002649 Jy/beam ! Clean residual mean=0.000001 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.198442 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.198442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222260Jy sigma=0.000786 ! Fit after self-cal, rms=0.222226Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222226Jy sigma=0.000786 ! Fit after self-cal, rms=0.223783Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=7.664 mas, bpa=2.074 degrees ! Estimated noise=846.833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184455 Jy ! Component: 100 - total flux cleaned = 0.00213372 Jy ! Component: 150 - total flux cleaned = 0.00216327 Jy ! Component: 200 - total flux cleaned = 0.00219138 Jy ! Total flux subtracted in 200 components = 0.00219138 Jy ! Clean residual min=-0.002767 max=0.002398 Jy/beam ! Clean residual mean=0.000001 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.200634 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.200634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223727Jy sigma=0.000785 ! Fit after self-cal, rms=0.223730Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497561 Jy ! Component: 100 - total flux cleaned = 0.000417621 Jy ! Component: 150 - total flux cleaned = 0.000344756 Jy ! Component: 200 - total flux cleaned = 0.000278562 Jy ! Total flux subtracted in 200 components = 0.000278562 Jy ! Clean residual min=-0.002758 max=0.002396 Jy/beam ! Clean residual mean=0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.200912 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.200912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223707Jy sigma=0.000785 ! Fit after self-cal, rms=0.223710Jy sigma=0.000785 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223710Jy sigma=0.000785 ! Fit after self-cal, rms=0.224293Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.977 mas, bmaj=12.32 mas, bpa=3.471 degrees ! Estimated noise=1143.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113925 Jy ! Component: 100 - total flux cleaned = 0.00138929 Jy ! Component: 150 - total flux cleaned = 0.00144247 Jy ! Component: 200 - total flux cleaned = 0.00147269 Jy ! Total flux subtracted in 200 components = 0.00147269 Jy ! Clean residual min=-0.003196 max=0.002652 Jy/beam ! Clean residual mean=0.000003 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.202385 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.202385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224269Jy sigma=0.000785 ! Fit after self-cal, rms=0.224272Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162321 Jy ! Component: 100 - total flux cleaned = 9.60536e-05 Jy ! Component: 150 - total flux cleaned = 5.54018e-05 Jy ! Component: 200 - total flux cleaned = 4.32541e-05 Jy ! Total flux subtracted in 200 components = 4.32541e-05 Jy ! Clean residual min=-0.003260 max=0.002604 Jy/beam ! Clean residual mean=0.000003 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.202428 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.202428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224263Jy sigma=0.000785 ! Fit after self-cal, rms=0.224263Jy sigma=0.000785 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.657 mas, bpa=1.973 degrees ! Estimated noise=847.816 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.657 at 1.973 degrees (North through East) ! Clean map min=-0.0026276 max=0.17117 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=6.731 mas, bpa=2.617 degrees ! Estimated noise=1015.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132704 Jy ! Component: 100 - total flux cleaned = 0.16645 Jy ! Component: 150 - total flux cleaned = 0.18078 Jy ! Component: 200 - total flux cleaned = 0.188663 Jy ! Total flux subtracted in 200 components = 0.188663 Jy ! Clean residual min=-0.003681 max=0.004154 Jy/beam ! Clean residual mean=0.000001 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.188663 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.188663 Jy ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.657 mas, bpa=1.973 degrees ! Estimated noise=847.816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613781 Jy ! Component: 100 - total flux cleaned = 0.00974955 Jy ! Component: 150 - total flux cleaned = 0.0118827 Jy ! Component: 200 - total flux cleaned = 0.0127882 Jy ! Total flux subtracted in 200 components = 0.0127882 Jy ! Clean residual min=-0.003014 max=0.002460 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.201451 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 0.201451 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.977 mas, bmaj=12.32 mas, bpa=3.471 degrees ! Estimated noise=1143.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103002 Jy ! Component: 100 - total flux cleaned = 0.00111145 Jy ! Component: 150 - total flux cleaned = 0.0011443 Jy ! Component: 200 - total flux cleaned = 0.00116817 Jy ! Total flux subtracted in 200 components = 0.00116817 Jy ! Clean residual min=-0.003360 max=0.002676 Jy/beam ! Clean residual mean=0.000003 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.202619 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1621e-05 Jy ! Component: 100 - total flux cleaned = 5.9058e-05 Jy ! Component: 150 - total flux cleaned = 9.17614e-05 Jy ! Component: 200 - total flux cleaned = 0.000120757 Jy ! Total flux subtracted in 200 components = 0.000120757 Jy ! Clean residual min=-0.003377 max=0.002590 Jy/beam ! Clean residual mean=0.000003 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.20274 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 71 components and 0.20274 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=7.657 mas, bpa=1.973 degrees ! Estimated noise=847.816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.24459e-05 Jy ! Component: 100 - total flux cleaned = 5.14111e-05 Jy ! Component: 150 - total flux cleaned = 1.87423e-05 Jy ! Component: 200 - total flux cleaned = -1.20939e-05 Jy ! Total flux subtracted in 200 components = -1.20939e-05 Jy ! Clean residual min=-0.002819 max=0.002416 Jy/beam ! Clean residual mean=0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.202728 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.202728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224272Jy sigma=0.000785 ! Fit after self-cal, rms=0.224274Jy sigma=0.000785 wmodel J0636-0547_S_2015_01_23_pus_map.mod ! Writing 85 model components to file: J0636-0547_S_2015_01_23_pus_map.mod wobs J0636-0547_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0636-0547_S_2015_01_23_pus_uvs.fits wwins J0636-0547_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0636-0547_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000890492 Jy ! Component: 100 - total flux cleaned = -0.000935848 Jy ! Component: 150 - total flux cleaned = -0.000856413 Jy ! Component: 200 - total flux cleaned = -0.000780534 Jy ! Component: 250 - total flux cleaned = -0.000634601 Jy ! Component: 300 - total flux cleaned = -0.000705794 Jy ! Component: 350 - total flux cleaned = -0.000705628 Jy ! Component: 400 - total flux cleaned = -0.00080614 Jy ! Component: 450 - total flux cleaned = -0.00090381 Jy ! Component: 500 - total flux cleaned = -0.000903981 Jy ! Component: 550 - total flux cleaned = -0.000998227 Jy ! Component: 600 - total flux cleaned = -0.00105926 Jy ! Component: 650 - total flux cleaned = -0.00105886 Jy ! Component: 700 - total flux cleaned = -0.00105888 Jy ! Component: 750 - total flux cleaned = -0.00114651 Jy ! Component: 800 - total flux cleaned = -0.00123225 Jy ! Component: 850 - total flux cleaned = -0.00134556 Jy ! Component: 900 - total flux cleaned = -0.00137376 Jy ! Component: 950 - total flux cleaned = -0.00142923 Jy ! Component: 1000 - total flux cleaned = -0.00159136 Jy ! Component: 1050 - total flux cleaned = -0.00161782 Jy ! Component: 1100 - total flux cleaned = -0.0016706 Jy ! Component: 1150 - total flux cleaned = -0.00174844 Jy ! Component: 1200 - total flux cleaned = -0.00174842 Jy ! Component: 1250 - total flux cleaned = -0.00182408 Jy ! Component: 1300 - total flux cleaned = -0.00184875 Jy ! Component: 1350 - total flux cleaned = -0.00184857 Jy ! Component: 1400 - total flux cleaned = -0.00187268 Jy ! Component: 1450 - total flux cleaned = -0.00184828 Jy ! Component: 1500 - total flux cleaned = -0.00177652 Jy ! Component: 1550 - total flux cleaned = -0.00180032 Jy ! Component: 1600 - total flux cleaned = -0.00184717 Jy ! Component: 1650 - total flux cleaned = -0.00180093 Jy ! Component: 1700 - total flux cleaned = -0.00191533 Jy ! Component: 1750 - total flux cleaned = -0.00186955 Jy ! Component: 1800 - total flux cleaned = -0.00189198 Jy ! Component: 1850 - total flux cleaned = -0.00184717 Jy ! Component: 1900 - total flux cleaned = -0.00186906 Jy ! Component: 1950 - total flux cleaned = -0.00180324 Jy ! Component: 2000 - total flux cleaned = -0.00184671 Jy ! Component: 2050 - total flux cleaned = -0.00184667 Jy ! Component: 2100 - total flux cleaned = -0.00182567 Jy ! Component: 2150 - total flux cleaned = -0.00184691 Jy ! Component: 2200 - total flux cleaned = -0.00188883 Jy ! Component: 2250 - total flux cleaned = -0.00186792 Jy ! Component: 2300 - total flux cleaned = -0.00190918 Jy ! Component: 2350 - total flux cleaned = -0.00188865 Jy ! Component: 2400 - total flux cleaned = -0.00188869 Jy ! Component: 2450 - total flux cleaned = -0.00188848 Jy ! Component: 2500 - total flux cleaned = -0.00194864 Jy ! Component: 2550 - total flux cleaned = -0.00192885 Jy ! Component: 2600 - total flux cleaned = -0.00194866 Jy ! Component: 2650 - total flux cleaned = -0.00192911 Jy ! Component: 2700 - total flux cleaned = -0.00194848 Jy ! Component: 2750 - total flux cleaned = -0.00190958 Jy ! Component: 2800 - total flux cleaned = -0.00181331 Jy ! Component: 2850 - total flux cleaned = -0.00188976 Jy ! Component: 2900 - total flux cleaned = -0.00192778 Jy ! Component: 2950 - total flux cleaned = -0.00190897 Jy ! Component: 3000 - total flux cleaned = -0.00196498 Jy ! Component: 3050 - total flux cleaned = -0.00198353 Jy ! Component: 3100 - total flux cleaned = -0.00198358 Jy ! Component: 3150 - total flux cleaned = -0.00205742 Jy ! Component: 3200 - total flux cleaned = -0.00203911 Jy ! Component: 3250 - total flux cleaned = -0.00207554 Jy ! Component: 3300 - total flux cleaned = -0.00211174 Jy ! Component: 3350 - total flux cleaned = -0.00216581 Jy ! Component: 3400 - total flux cleaned = -0.00221959 Jy ! Component: 3450 - total flux cleaned = -0.00223746 Jy ! Component: 3500 - total flux cleaned = -0.0022908 Jy ! Component: 3550 - total flux cleaned = -0.00232609 Jy ! Component: 3600 - total flux cleaned = -0.00237876 Jy ! Component: 3650 - total flux cleaned = -0.00244872 Jy ! Component: 3700 - total flux cleaned = -0.0024313 Jy ! Component: 3750 - total flux cleaned = -0.00251781 Jy ! Component: 3800 - total flux cleaned = -0.00256942 Jy ! Component: 3850 - total flux cleaned = -0.00253529 Jy ! Component: 3900 - total flux cleaned = -0.00258644 Jy ! Component: 3950 - total flux cleaned = -0.00263741 Jy ! Component: 4000 - total flux cleaned = -0.0026542 Jy ! Component: 4050 - total flux cleaned = -0.00273829 Jy ! Total flux subtracted in 4096 components = -0.00277176 Jy ! Clean residual min=-0.001078 max=0.000902 Jy/beam ! Clean residual mean=0.000001 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.199956 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 384 components and 0.199956 Jy ![Exited script file: muppet] wmap "J0636-0547_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.657 at 1.973 degrees (North through East) ! Clean map min=-0.0023597 max=0.17021 Jy/beam ! Writing clean map to FITS file: J0636-0547_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000318007 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.560484 0.560484 1.12097 2.24194 4.48387 8.96774 17.9355 35.871 71.742 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 7.657 at 1.973 degrees (North through East) ! Clean map min=-0.0023597 max=0.17021 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0636-0547_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:08:50 2017