! Started logfile: J0632-1250_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:39 2017 obs J0632-1250_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0632-1250_S_2015_01_23_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.792271 visibilities/baseline/integration-bin. ! Found source: J0632-1250 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 16400 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0632-1250_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 242 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.916794Jy sigma=0.009104 ! Fit after self-cal, rms=0.889321Jy sigma=0.008883 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.686 mas, bmaj=7.09 mas, bpa=1.865 degrees ! Estimated noise=825.588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0909386 Jy ! Component: 100 - total flux cleaned = 0.113515 Jy ! Total flux subtracted in 100 components = 0.113515 Jy ! Clean residual min=-0.007794 max=0.010791 Jy/beam ! Clean residual mean=0.000036 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.113515 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.113515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119106Jy sigma=0.000843 ! Fit after self-cal, rms=0.119045Jy sigma=0.000843 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.929 mas, bpa=0.4735 degrees ! Estimated noise=599.675 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132171 Jy ! Component: 100 - total flux cleaned = 0.0193085 Jy ! Component: 150 - total flux cleaned = 0.0215627 Jy ! Component: 200 - total flux cleaned = 0.0216405 Jy ! Total flux subtracted in 200 components = 0.0216405 Jy ! Clean residual min=-0.006894 max=0.010775 Jy/beam ! Clean residual mean=0.000053 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 0.135156 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 16 components and 0.135156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118252Jy sigma=0.000821 ! Fit after self-cal, rms=0.118193Jy sigma=0.000821 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.93 KP 1.02 ! LA 1.45 MK 1.04 NL 0.96 OV 0.91 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.72 HN 0.99 KP 0.94 ! LA 1.35 MK 1.06 NL 1.05 OV 0.96 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.66 HN 0.98 KP 0.83 ! LA 1.06 MK 1.10 NL 1.07 OV 0.89 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.50 HN 0.93 KP 0.76 ! LA 1.14 MK 1.10 NL 0.99 OV 0.92 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.118193Jy sigma=0.000821 ! Fit after self-cal, rms=0.162254Jy sigma=0.000794 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.966 mas, bpa=0.9595 degrees ! Estimated noise=597.952 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000784868 Jy ! Component: 100 - total flux cleaned = 0.000786073 Jy ! Component: 150 - total flux cleaned = 0.000815398 Jy ! Component: 200 - total flux cleaned = 0.00076342 Jy ! Total flux subtracted in 200 components = 0.00076342 Jy ! Clean residual min=-0.005660 max=0.006725 Jy/beam ! Clean residual mean=0.000004 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.135919 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.135919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162235Jy sigma=0.000794 ! Fit after self-cal, rms=0.162775Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162775Jy sigma=0.000793 ! Fit after self-cal, rms=0.163738Jy sigma=0.000772 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.997 mas, bpa=0.8726 degrees ! Estimated noise=600.812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436006 Jy ! Component: 100 - total flux cleaned = 0.000498764 Jy ! Component: 150 - total flux cleaned = 0.000517918 Jy ! Component: 200 - total flux cleaned = 0.000568899 Jy ! Total flux subtracted in 200 components = 0.000568899 Jy ! Clean residual min=-0.002612 max=0.005286 Jy/beam ! Clean residual mean=0.000023 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.136488 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.136488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163731Jy sigma=0.000772 ! Fit after self-cal, rms=0.164057Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050371 Jy ! Component: 100 - total flux cleaned = 0.00767688 Jy ! Component: 150 - total flux cleaned = 0.00888729 Jy ! Component: 200 - total flux cleaned = 0.00952219 Jy ! Total flux subtracted in 200 components = 0.00952219 Jy ! Clean residual min=-0.002163 max=0.002781 Jy/beam ! Clean residual mean=0.000009 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.146011 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 0.146011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163872Jy sigma=0.000768 ! Fit after self-cal, rms=0.163760Jy sigma=0.000768 ! Inverting map ! Added new window around map position (8.5, -36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241814 Jy ! Component: 100 - total flux cleaned = 0.00351258 Jy ! Component: 150 - total flux cleaned = 0.00413855 Jy ! Component: 200 - total flux cleaned = 0.00453424 Jy ! Total flux subtracted in 200 components = 0.00453424 Jy ! Clean residual min=-0.001795 max=0.001796 Jy/beam ! Clean residual mean=0.000005 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.150545 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.150545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163717Jy sigma=0.000767 ! Fit after self-cal, rms=0.163700Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163700Jy sigma=0.000767 ! Fit after self-cal, rms=0.162117Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=7.995 mas, bpa=0.9 degrees ! Estimated noise=598.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118806 Jy ! Component: 100 - total flux cleaned = 0.00132878 Jy ! Component: 150 - total flux cleaned = 0.00145006 Jy ! Component: 200 - total flux cleaned = 0.00155633 Jy ! Total flux subtracted in 200 components = 0.00155633 Jy ! Clean residual min=-0.001611 max=0.001600 Jy/beam ! Clean residual mean=0.000004 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.152101 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 97 components and 0.152101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162096Jy sigma=0.000767 ! Fit after self-cal, rms=0.162097Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286931 Jy ! Component: 100 - total flux cleaned = 0.000333823 Jy ! Component: 150 - total flux cleaned = 0.000398309 Jy ! Component: 200 - total flux cleaned = 0.000438435 Jy ! Total flux subtracted in 200 components = 0.000438435 Jy ! Clean residual min=-0.001590 max=0.001596 Jy/beam ! Clean residual mean=0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.15254 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.15254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162085Jy sigma=0.000766 ! Fit after self-cal, rms=0.162076Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162076Jy sigma=0.000766 ! Fit after self-cal, rms=0.161550Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.934 mas, bmaj=13.37 mas, bpa=-0.2207 degrees ! Estimated noise=799.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103119 Jy ! Component: 100 - total flux cleaned = 0.00119534 Jy ! Component: 150 - total flux cleaned = 0.00127205 Jy ! Component: 200 - total flux cleaned = 0.00118519 Jy ! Total flux subtracted in 200 components = 0.00118519 Jy ! Clean residual min=-0.001972 max=0.001830 Jy/beam ! Clean residual mean=0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.153725 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 119 components and 0.153725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161541Jy sigma=0.000766 ! Fit after self-cal, rms=0.161536Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018122 Jy ! Component: 100 - total flux cleaned = 0.000182531 Jy ! Component: 150 - total flux cleaned = 0.000105144 Jy ! Component: 200 - total flux cleaned = 3.55507e-05 Jy ! Total flux subtracted in 200 components = 3.55507e-05 Jy ! Clean residual min=-0.001994 max=0.001862 Jy/beam ! Clean residual mean=-0.000000 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.15376 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 0.15376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161532Jy sigma=0.000766 ! Fit after self-cal, rms=0.161529Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.997 mas, bpa=0.8904 degrees ! Estimated noise=598.026 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.997 at 0.8904 degrees (North through East) ! Clean map min=-0.001723 max=0.12071 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=7.17 mas, bpa=2.333 degrees ! Estimated noise=826.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0906698 Jy ! Component: 100 - total flux cleaned = 0.1132 Jy ! Component: 150 - total flux cleaned = 0.123937 Jy ! Component: 200 - total flux cleaned = 0.130604 Jy ! Total flux subtracted in 200 components = 0.130604 Jy ! Clean residual min=-0.003365 max=0.003786 Jy/beam ! Clean residual mean=0.000015 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.130604 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.130604 Jy ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.997 mas, bpa=0.8904 degrees ! Estimated noise=598.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588998 Jy ! Component: 100 - total flux cleaned = 0.0100058 Jy ! Component: 150 - total flux cleaned = 0.0131679 Jy ! Component: 200 - total flux cleaned = 0.0156723 Jy ! Total flux subtracted in 200 components = 0.0156723 Jy ! Clean residual min=-0.001951 max=0.002647 Jy/beam ! Clean residual mean=0.000009 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.146277 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 0.146277 Jy ! Inverting map ! Added new window around map position (-4.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244028 Jy ! Component: 100 - total flux cleaned = 0.00399089 Jy ! Component: 150 - total flux cleaned = 0.00482042 Jy ! Component: 200 - total flux cleaned = 0.00544139 Jy ! Total flux subtracted in 200 components = 0.00544139 Jy ! Clean residual min=-0.001716 max=0.001601 Jy/beam ! Clean residual mean=0.000005 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.151718 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 0.151718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.934 mas, bmaj=13.37 mas, bpa=-0.2207 degrees ! Estimated noise=799.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187266 Jy ! Component: 100 - total flux cleaned = 0.00240487 Jy ! Component: 150 - total flux cleaned = 0.00247895 Jy ! Component: 200 - total flux cleaned = 0.00260077 Jy ! Total flux subtracted in 200 components = 0.00260077 Jy ! Clean residual min=-0.001969 max=0.001832 Jy/beam ! Clean residual mean=0.000003 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.154319 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106596 Jy ! Component: 100 - total flux cleaned = 0.000227029 Jy ! Component: 150 - total flux cleaned = 0.000314334 Jy ! Component: 200 - total flux cleaned = 0.000355214 Jy ! Total flux subtracted in 200 components = 0.000355214 Jy ! Clean residual min=-0.001992 max=0.001839 Jy/beam ! Clean residual mean=0.000003 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.154674 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 89 components and 0.154674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.997 mas, bpa=0.8904 degrees ! Estimated noise=598.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.54573e-05 Jy ! Component: 100 - total flux cleaned = -6.51373e-05 Jy ! Component: 150 - total flux cleaned = 4.49984e-05 Jy ! Component: 200 - total flux cleaned = 0.000215996 Jy ! Total flux subtracted in 200 components = 0.000215996 Jy ! Clean residual min=-0.001800 max=0.001457 Jy/beam ! Clean residual mean=0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.15489 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 0.15489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161526Jy sigma=0.000766 ! Fit after self-cal, rms=0.161531Jy sigma=0.000766 wmodel J0632-1250_S_2015_01_23_pus_map.mod ! Writing 114 model components to file: J0632-1250_S_2015_01_23_pus_map.mod wobs J0632-1250_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0632-1250_S_2015_01_23_pus_uvs.fits wwins J0632-1250_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0632-1250_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000620303 Jy ! Component: 100 - total flux cleaned = -0.000835714 Jy ! Component: 150 - total flux cleaned = -0.000962658 Jy ! Component: 200 - total flux cleaned = -0.0010845 Jy ! Component: 250 - total flux cleaned = -0.00124853 Jy ! Component: 300 - total flux cleaned = -0.00147572 Jy ! Component: 350 - total flux cleaned = -0.00167516 Jy ! Component: 400 - total flux cleaned = -0.0019335 Jy ! Component: 450 - total flux cleaned = -0.00208051 Jy ! Component: 500 - total flux cleaned = -0.00220348 Jy ! Component: 550 - total flux cleaned = -0.00236385 Jy ! Component: 600 - total flux cleaned = -0.00242301 Jy ! Component: 650 - total flux cleaned = -0.00253873 Jy ! Component: 700 - total flux cleaned = -0.00263304 Jy ! Component: 750 - total flux cleaned = -0.0026887 Jy ! Component: 800 - total flux cleaned = -0.00278001 Jy ! Component: 850 - total flux cleaned = -0.00286986 Jy ! Component: 900 - total flux cleaned = -0.00292262 Jy ! Component: 950 - total flux cleaned = -0.00295721 Jy ! Component: 1000 - total flux cleaned = -0.00295709 Jy ! Component: 1050 - total flux cleaned = -0.00300792 Jy ! Component: 1100 - total flux cleaned = -0.0030246 Jy ! Component: 1150 - total flux cleaned = -0.00307437 Jy ! Component: 1200 - total flux cleaned = -0.00309085 Jy ! Component: 1250 - total flux cleaned = -0.00312305 Jy ! Component: 1300 - total flux cleaned = -0.00315517 Jy ! Component: 1350 - total flux cleaned = -0.00321817 Jy ! Component: 1400 - total flux cleaned = -0.00321828 Jy ! Component: 1450 - total flux cleaned = -0.00328 Jy ! Component: 1500 - total flux cleaned = -0.00331014 Jy ! Component: 1550 - total flux cleaned = -0.00329484 Jy ! Component: 1600 - total flux cleaned = -0.00327994 Jy ! Component: 1650 - total flux cleaned = -0.00327995 Jy ! Component: 1700 - total flux cleaned = -0.00330923 Jy ! Component: 1750 - total flux cleaned = -0.00333801 Jy ! Component: 1800 - total flux cleaned = -0.00329491 Jy ! Component: 1850 - total flux cleaned = -0.00335175 Jy ! Component: 1900 - total flux cleaned = -0.00335168 Jy ! Component: 1950 - total flux cleaned = -0.00337951 Jy ! Component: 2000 - total flux cleaned = -0.00336568 Jy ! Component: 2050 - total flux cleaned = -0.00336579 Jy ! Component: 2100 - total flux cleaned = -0.00339293 Jy ! Component: 2150 - total flux cleaned = -0.00337953 Jy ! Component: 2200 - total flux cleaned = -0.00337962 Jy ! Component: 2250 - total flux cleaned = -0.00341954 Jy ! Component: 2300 - total flux cleaned = -0.00343267 Jy ! Component: 2350 - total flux cleaned = -0.00340653 Jy ! Component: 2400 - total flux cleaned = -0.00339357 Jy ! Component: 2450 - total flux cleaned = -0.00339346 Jy ! Component: 2500 - total flux cleaned = -0.00339331 Jy ! Component: 2550 - total flux cleaned = -0.00336819 Jy ! Component: 2600 - total flux cleaned = -0.00336823 Jy ! Component: 2650 - total flux cleaned = -0.00335593 Jy ! Component: 2700 - total flux cleaned = -0.00335591 Jy ! Component: 2750 - total flux cleaned = -0.00330699 Jy ! Component: 2800 - total flux cleaned = -0.00325843 Jy ! Component: 2850 - total flux cleaned = -0.00328269 Jy ! Component: 2900 - total flux cleaned = -0.0032827 Jy ! Component: 2950 - total flux cleaned = -0.00327085 Jy ! Component: 3000 - total flux cleaned = -0.00324724 Jy ! Component: 3050 - total flux cleaned = -0.00327084 Jy ! Component: 3100 - total flux cleaned = -0.00323578 Jy ! Component: 3150 - total flux cleaned = -0.00320088 Jy ! Component: 3200 - total flux cleaned = -0.00320088 Jy ! Component: 3250 - total flux cleaned = -0.00317801 Jy ! Component: 3300 - total flux cleaned = -0.00318942 Jy ! Component: 3350 - total flux cleaned = -0.00314403 Jy ! Component: 3400 - total flux cleaned = -0.00314407 Jy ! Component: 3450 - total flux cleaned = -0.00313289 Jy ! Component: 3500 - total flux cleaned = -0.00311054 Jy ! Component: 3550 - total flux cleaned = -0.00312164 Jy ! Component: 3600 - total flux cleaned = -0.00311067 Jy ! Component: 3650 - total flux cleaned = -0.00309958 Jy ! Component: 3700 - total flux cleaned = -0.00307776 Jy ! Component: 3750 - total flux cleaned = -0.00305597 Jy ! Component: 3800 - total flux cleaned = -0.00304524 Jy ! Component: 3850 - total flux cleaned = -0.0030238 Jy ! Component: 3900 - total flux cleaned = -0.00302375 Jy ! Component: 3950 - total flux cleaned = -0.00300243 Jy ! Component: 4000 - total flux cleaned = -0.00301293 Jy ! Component: 4050 - total flux cleaned = -0.00297081 Jy ! Total flux subtracted in 4096 components = -0.00301276 Jy ! Clean residual min=-0.000761 max=0.000665 Jy/beam ! Clean residual mean=0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.151877 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 403 components and 0.151877 Jy ![Exited script file: muppet] wmap "J0632-1250_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.997 at 0.8904 degrees (North through East) ! Clean map min=-0.0018721 max=0.11993 Jy/beam ! Writing clean map to FITS file: J0632-1250_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119929 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000191327 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.478602 0.478602 0.957205 1.91441 3.82882 7.65764 15.3153 30.6305 61.2611 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 7.997 at 0.8904 degrees (North through East) ! Clean map min=-0.0018721 max=0.11993 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0632-1250_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:08:44 2017