! Started logfile: J0631-1410_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:34 2017 obs J0631-1410_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0631-1410_S_2015_01_23_pus_uva.fits ! AN table 1: 57 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.766082 visibilities/baseline/integration-bin. ! Found source: J0631-1410 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 7860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0631-1410_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 128 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.765595Jy sigma=0.006948 ! Fit after self-cal, rms=0.740618Jy sigma=0.006721 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.667 mas, bmaj=7.186 mas, bpa=2.039 degrees ! Estimated noise=1092.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247014 Jy ! Component: 100 - total flux cleaned = 0.310233 Jy ! Total flux subtracted in 100 components = 0.310233 Jy ! Clean residual min=-0.018031 max=0.028131 Jy/beam ! Clean residual mean=0.000018 rms=0.005792 Jy/beam ! Combined flux in latest and established models = 0.310233 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.310233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308418Jy sigma=0.001195 ! Fit after self-cal, rms=0.308407Jy sigma=0.001195 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.983 mas, bpa=0.3517 degrees ! Estimated noise=884.411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031619 Jy ! Component: 100 - total flux cleaned = 0.0467642 Jy ! Component: 150 - total flux cleaned = 0.0536256 Jy ! Component: 200 - total flux cleaned = 0.0536234 Jy ! Total flux subtracted in 200 components = 0.0536234 Jy ! Clean residual min=-0.017969 max=0.029485 Jy/beam ! Clean residual mean=0.000038 rms=0.005970 Jy/beam ! Combined flux in latest and established models = 0.363856 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 41 components and 0.363856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305185Jy sigma=0.001102 ! Fit after self-cal, rms=0.305164Jy sigma=0.001102 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.92 KP 1.04 ! LA 1.39 MK 1.09 NL 0.95 OV 0.91 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.83 HN 0.97 KP 0.96 ! LA 1.37 MK 1.07 NL 1.04 OV 0.94 ! PT 0.93 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 3.06 HN 0.96 KP 0.83 ! LA 1.11 MK 1.06 NL 1.04 OV 0.86 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 2.75 HN 0.91 KP 0.76 ! LA 1.14 MK 1.05 NL 0.96 OV 0.90 ! PT 0.95 SC 0.95 ! ! ! Fit before self-cal, rms=0.305164Jy sigma=0.001102 ! Fit after self-cal, rms=0.770880Jy sigma=0.000922 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=8.015 mas, bpa=0.6634 degrees ! Estimated noise=885.433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366218 Jy ! Component: 100 - total flux cleaned = 0.00448673 Jy ! Component: 150 - total flux cleaned = 0.00469613 Jy ! Component: 200 - total flux cleaned = 0.00487604 Jy ! Total flux subtracted in 200 components = 0.00487604 Jy ! Clean residual min=-0.019036 max=0.014982 Jy/beam ! Clean residual mean=-0.000088 rms=0.004343 Jy/beam ! Combined flux in latest and established models = 0.368732 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.368732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.770559Jy sigma=0.000921 ! Fit after self-cal, rms=0.770814Jy sigma=0.000920 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.770814Jy sigma=0.000920 ! Fit after self-cal, rms=0.389882Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=8.04 mas, bpa=0.5289 degrees ! Estimated noise=891.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319819 Jy ! Component: 100 - total flux cleaned = 0.00428133 Jy ! Component: 150 - total flux cleaned = 0.00445593 Jy ! Component: 200 - total flux cleaned = 0.00467143 Jy ! Total flux subtracted in 200 components = 0.00467143 Jy ! Clean residual min=-0.003866 max=0.007849 Jy/beam ! Clean residual mean=-0.000027 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.373404 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.373404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389700Jy sigma=0.000770 ! Fit after self-cal, rms=0.389804Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00690509 Jy ! Component: 100 - total flux cleaned = 0.0103838 Jy ! Component: 150 - total flux cleaned = 0.0121181 Jy ! Component: 200 - total flux cleaned = 0.0124941 Jy ! Total flux subtracted in 200 components = 0.0124941 Jy ! Clean residual min=-0.003222 max=0.004271 Jy/beam ! Clean residual mean=-0.000021 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.385898 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 89 components and 0.385898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389590Jy sigma=0.000763 ! Fit after self-cal, rms=0.389589Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389589Jy sigma=0.000762 ! Fit after self-cal, rms=0.252945Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.035 mas, bpa=0.4111 degrees ! Estimated noise=892.195 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292041 Jy ! Component: 100 - total flux cleaned = 0.00389676 Jy ! Component: 150 - total flux cleaned = 0.00405171 Jy ! Component: 200 - total flux cleaned = 0.00423344 Jy ! Total flux subtracted in 200 components = 0.00423344 Jy ! Clean residual min=-0.003038 max=0.003676 Jy/beam ! Clean residual mean=0.000001 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.390131 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.390131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252895Jy sigma=0.000759 ! Fit after self-cal, rms=0.252875Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 114.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299031 Jy ! Component: 100 - total flux cleaned = 0.00419678 Jy ! Component: 150 - total flux cleaned = 0.00473303 Jy ! Component: 200 - total flux cleaned = 0.00510502 Jy ! Total flux subtracted in 200 components = 0.00510502 Jy ! Clean residual min=-0.002865 max=0.002972 Jy/beam ! Clean residual mean=0.000000 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.395236 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 122 components and 0.395236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252793Jy sigma=0.000757 ! Fit after self-cal, rms=0.252791Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252791Jy sigma=0.000757 ! Fit after self-cal, rms=0.252996Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.905 mas, bmaj=13.7 mas, bpa=-0.7143 degrees ! Estimated noise=1208.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211379 Jy ! Component: 100 - total flux cleaned = 0.00273469 Jy ! Component: 150 - total flux cleaned = 0.00304556 Jy ! Component: 200 - total flux cleaned = 0.00328954 Jy ! Total flux subtracted in 200 components = 0.00328954 Jy ! Clean residual min=-0.003302 max=0.002872 Jy/beam ! Clean residual mean=-0.000001 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.398526 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 141 components and 0.398526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252971Jy sigma=0.000757 ! Fit after self-cal, rms=0.252970Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161155 Jy ! Component: 100 - total flux cleaned = 0.000496868 Jy ! Component: 150 - total flux cleaned = 0.000687687 Jy ! Component: 200 - total flux cleaned = 0.000856398 Jy ! Total flux subtracted in 200 components = 0.000856398 Jy ! Clean residual min=-0.003256 max=0.002770 Jy/beam ! Clean residual mean=-0.000000 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.399382 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 145 components and 0.399382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252965Jy sigma=0.000757 ! Fit after self-cal, rms=0.252962Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.033 mas, bpa=0.3953 degrees ! Estimated noise=892.596 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 8.033 at 0.3953 degrees (North through East) ! Clean map min=-0.0026136 max=0.32457 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.663 mas, bmaj=7.231 mas, bpa=2.053 degrees ! Estimated noise=1097.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.248077 Jy ! Component: 100 - total flux cleaned = 0.311776 Jy ! Component: 150 - total flux cleaned = 0.339718 Jy ! Component: 200 - total flux cleaned = 0.355731 Jy ! Total flux subtracted in 200 components = 0.355731 Jy ! Clean residual min=-0.005029 max=0.008098 Jy/beam ! Clean residual mean=-0.000006 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.355731 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.355731 Jy ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.033 mas, bpa=0.3953 degrees ! Estimated noise=892.596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116232 Jy ! Component: 100 - total flux cleaned = 0.0189665 Jy ! Component: 150 - total flux cleaned = 0.0240671 Jy ! Component: 200 - total flux cleaned = 0.0279571 Jy ! Total flux subtracted in 200 components = 0.0279571 Jy ! Clean residual min=-0.003111 max=0.003191 Jy/beam ! Clean residual mean=-0.000004 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.383688 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 73 components and 0.383688 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.905 mas, bmaj=13.7 mas, bpa=-0.7143 degrees ! Estimated noise=1208.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493684 Jy ! Component: 100 - total flux cleaned = 0.0079893 Jy ! Component: 150 - total flux cleaned = 0.0102217 Jy ! Component: 200 - total flux cleaned = 0.0118923 Jy ! Total flux subtracted in 200 components = 0.0118923 Jy ! Clean residual min=-0.003347 max=0.002979 Jy/beam ! Clean residual mean=-0.000001 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.39558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012949 Jy ! Component: 100 - total flux cleaned = 0.00196725 Jy ! Component: 150 - total flux cleaned = 0.0025406 Jy ! Component: 200 - total flux cleaned = 0.00297709 Jy ! Total flux subtracted in 200 components = 0.00297709 Jy ! Clean residual min=-0.003251 max=0.002883 Jy/beam ! Clean residual mean=-0.000000 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.398557 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 150 components and 0.398557 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=8.033 mas, bpa=0.3953 degrees ! Estimated noise=892.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000891179 Jy ! Component: 100 - total flux cleaned = 0.00106597 Jy ! Component: 150 - total flux cleaned = 0.00125162 Jy ! Component: 200 - total flux cleaned = 0.00128494 Jy ! Total flux subtracted in 200 components = 0.00128494 Jy ! Clean residual min=-0.002520 max=0.002725 Jy/beam ! Clean residual mean=-0.000001 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.399842 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 168 components and 0.399842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252955Jy sigma=0.000757 ! Fit after self-cal, rms=0.252948Jy sigma=0.000757 wmodel J0631-1410_S_2015_01_23_pus_map.mod ! Writing 168 model components to file: J0631-1410_S_2015_01_23_pus_map.mod wobs J0631-1410_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0631-1410_S_2015_01_23_pus_uvs.fits wwins J0631-1410_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0631-1410_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262849 Jy ! Component: 100 - total flux cleaned = 0.000304069 Jy ! Component: 150 - total flux cleaned = 0.000387233 Jy ! Component: 200 - total flux cleaned = 0.000468023 Jy ! Component: 250 - total flux cleaned = 0.000660747 Jy ! Component: 300 - total flux cleaned = 0.000736032 Jy ! Component: 350 - total flux cleaned = 0.000918371 Jy ! Component: 400 - total flux cleaned = 0.00106063 Jy ! Component: 450 - total flux cleaned = 0.00133817 Jy ! Component: 500 - total flux cleaned = 0.00140558 Jy ! Component: 550 - total flux cleaned = 0.00157235 Jy ! Component: 600 - total flux cleaned = 0.00163754 Jy ! Component: 650 - total flux cleaned = 0.0017661 Jy ! Component: 700 - total flux cleaned = 0.00189242 Jy ! Component: 750 - total flux cleaned = 0.00201591 Jy ! Component: 800 - total flux cleaned = 0.00201586 Jy ! Component: 850 - total flux cleaned = 0.00207634 Jy ! Component: 900 - total flux cleaned = 0.00219516 Jy ! Component: 950 - total flux cleaned = 0.00237021 Jy ! Component: 1000 - total flux cleaned = 0.00251385 Jy ! Component: 1050 - total flux cleaned = 0.00259871 Jy ! Component: 1100 - total flux cleaned = 0.00271129 Jy ! Component: 1150 - total flux cleaned = 0.00276718 Jy ! Component: 1200 - total flux cleaned = 0.00284932 Jy ! Component: 1250 - total flux cleaned = 0.00293063 Jy ! Component: 1300 - total flux cleaned = 0.00303735 Jy ! Component: 1350 - total flux cleaned = 0.00314291 Jy ! Component: 1400 - total flux cleaned = 0.00329908 Jy ! Component: 1450 - total flux cleaned = 0.00332469 Jy ! Component: 1500 - total flux cleaned = 0.00340083 Jy ! Component: 1550 - total flux cleaned = 0.00347606 Jy ! Component: 1600 - total flux cleaned = 0.0035757 Jy ! Component: 1650 - total flux cleaned = 0.00360074 Jy ! Component: 1700 - total flux cleaned = 0.00374775 Jy ! Component: 1750 - total flux cleaned = 0.00377232 Jy ! Component: 1800 - total flux cleaned = 0.00382037 Jy ! Component: 1850 - total flux cleaned = 0.00393955 Jy ! Component: 1900 - total flux cleaned = 0.0039634 Jy ! Component: 1950 - total flux cleaned = 0.00403372 Jy ! Component: 2000 - total flux cleaned = 0.00408038 Jy ! Component: 2050 - total flux cleaned = 0.00417196 Jy ! Component: 2100 - total flux cleaned = 0.00426297 Jy ! Component: 2150 - total flux cleaned = 0.00435298 Jy ! Component: 2200 - total flux cleaned = 0.00439756 Jy ! Component: 2250 - total flux cleaned = 0.00444179 Jy ! Component: 2300 - total flux cleaned = 0.00446375 Jy ! Component: 2350 - total flux cleaned = 0.00455097 Jy ! Component: 2400 - total flux cleaned = 0.00457258 Jy ! Component: 2450 - total flux cleaned = 0.00455112 Jy ! Component: 2500 - total flux cleaned = 0.00465751 Jy ! Component: 2550 - total flux cleaned = 0.00461535 Jy ! Component: 2600 - total flux cleaned = 0.00467823 Jy ! Component: 2650 - total flux cleaned = 0.00469915 Jy ! Component: 2700 - total flux cleaned = 0.00471978 Jy ! Component: 2750 - total flux cleaned = 0.00476078 Jy ! Component: 2800 - total flux cleaned = 0.00482198 Jy ! Component: 2850 - total flux cleaned = 0.00474096 Jy ! Component: 2900 - total flux cleaned = 0.00488208 Jy ! Component: 2950 - total flux cleaned = 0.00488193 Jy ! Component: 3000 - total flux cleaned = 0.00492169 Jy ! Component: 3050 - total flux cleaned = 0.00494139 Jy ! Component: 3100 - total flux cleaned = 0.00494138 Jy ! Component: 3150 - total flux cleaned = 0.00503899 Jy ! Component: 3200 - total flux cleaned = 0.00498078 Jy ! Component: 3250 - total flux cleaned = 0.00503867 Jy ! Component: 3300 - total flux cleaned = 0.00511535 Jy ! Component: 3350 - total flux cleaned = 0.00511532 Jy ! Component: 3400 - total flux cleaned = 0.00522878 Jy ! Component: 3450 - total flux cleaned = 0.00522871 Jy ! Component: 3500 - total flux cleaned = 0.00524744 Jy ! Component: 3550 - total flux cleaned = 0.00526591 Jy ! Component: 3600 - total flux cleaned = 0.00533972 Jy ! Component: 3650 - total flux cleaned = 0.00537651 Jy ! Component: 3700 - total flux cleaned = 0.00539469 Jy ! Component: 3750 - total flux cleaned = 0.00546756 Jy ! Component: 3800 - total flux cleaned = 0.00548552 Jy ! Component: 3850 - total flux cleaned = 0.00548542 Jy ! Component: 3900 - total flux cleaned = 0.00553915 Jy ! Component: 3950 - total flux cleaned = 0.0055928 Jy ! Component: 4000 - total flux cleaned = 0.00557499 Jy ! Component: 4050 - total flux cleaned = 0.00568084 Jy ! Total flux subtracted in 4096 components = 0.00564567 Jy ! Clean residual min=-0.001015 max=0.000962 Jy/beam ! Clean residual mean=-0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.405488 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 475 components and 0.405488 Jy ![Exited script file: muppet] wmap "J0631-1410_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 8.033 at 0.3953 degrees (North through East) ! Clean map min=-0.0019324 max=0.32399 Jy/beam ! Writing clean map to FITS file: J0631-1410_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.323986 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000334394 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309638 0.309638 0.619276 1.23855 2.4771 4.95421 9.90841 19.8168 39.6336 79.2673 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.323 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.072 x 8.033 at 0.3953 degrees (North through East) ! Clean map min=-0.0019324 max=0.32399 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0631-1410_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:08:39 2017