! Started logfile: J0630-1323_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:56 2017 obs J0630-1323_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0630-1323_S_2014_01_04_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0630-1323 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0630-1323_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 172 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.881657Jy sigma=0.011367 ! Fit after self-cal, rms=0.857564Jy sigma=0.011078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.695 mas, bmaj=5.727 mas, bpa=1.862 degrees ! Estimated noise=1235.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105842 Jy ! Component: 100 - total flux cleaned = 0.1371 Jy ! Total flux subtracted in 100 components = 0.1371 Jy ! Clean residual min=-0.008858 max=0.014027 Jy/beam ! Clean residual mean=0.000001 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 0.1371 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.1371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088117Jy sigma=0.000991 ! Fit after self-cal, rms=0.088107Jy sigma=0.000991 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=6.526 mas, bpa=-0.5943 degrees ! Estimated noise=679.216 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213938 Jy ! Component: 100 - total flux cleaned = 0.031685 Jy ! Component: 150 - total flux cleaned = 0.0372552 Jy ! Component: 200 - total flux cleaned = 0.0403241 Jy ! Total flux subtracted in 200 components = 0.0403241 Jy ! Clean residual min=-0.005254 max=0.008717 Jy/beam ! Clean residual mean=0.000022 rms=0.001799 Jy/beam ! Combined flux in latest and established models = 0.177424 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 33 components and 0.177424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082400Jy sigma=0.000936 ! Fit after self-cal, rms=0.082451Jy sigma=0.000935 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 1.00 ! MK 0.99 NL 0.96 OV 0.96 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.94 ! MK 1.00 NL 1.04 OV 0.98 PT 0.95 ! SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.78 ! MK 1.03 NL 0.96 OV 0.91 PT 0.94 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* KP 1.00* LA 0.85 ! MK 1.00 NL 1.07 OV 0.96 PT 0.97 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.082451Jy sigma=0.000935 ! Fit after self-cal, rms=0.077185Jy sigma=0.000901 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.616 mas, bpa=-0.4061 degrees ! Estimated noise=676.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02773e-05 Jy ! Component: 100 - total flux cleaned = -3.20816e-05 Jy ! Component: 150 - total flux cleaned = 2.03388e-05 Jy ! Component: 200 - total flux cleaned = 1.78459e-05 Jy ! Total flux subtracted in 200 components = 1.78459e-05 Jy ! Clean residual min=-0.003137 max=0.003343 Jy/beam ! Clean residual mean=0.000004 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.177442 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.177442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077100Jy sigma=0.000900 ! Fit after self-cal, rms=0.076657Jy sigma=0.000899 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076657Jy sigma=0.000899 ! Fit after self-cal, rms=0.076377Jy sigma=0.000896 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.606 mas, bpa=-0.611 degrees ! Estimated noise=676.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237591 Jy ! Component: 100 - total flux cleaned = 0.000368714 Jy ! Component: 150 - total flux cleaned = 0.000396429 Jy ! Component: 200 - total flux cleaned = 0.0004212 Jy ! Total flux subtracted in 200 components = 0.0004212 Jy ! Clean residual min=-0.002785 max=0.002615 Jy/beam ! Clean residual mean=0.000003 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.177863 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.177863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076350Jy sigma=0.000896 ! Fit after self-cal, rms=0.076325Jy sigma=0.000896 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.78386e-05 Jy ! Component: 100 - total flux cleaned = -5.56088e-05 Jy ! Component: 150 - total flux cleaned = -5.71902e-05 Jy ! Component: 200 - total flux cleaned = -7.66495e-05 Jy ! Total flux subtracted in 200 components = -7.66495e-05 Jy ! Clean residual min=-0.002771 max=0.002641 Jy/beam ! Clean residual mean=0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.177787 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.177787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076312Jy sigma=0.000896 ! Fit after self-cal, rms=0.076312Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076312Jy sigma=0.000896 ! Fit after self-cal, rms=0.076254Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.188 mas, bmaj=6.608 mas, bpa=-0.6226 degrees ! Estimated noise=676.513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214709 Jy ! Component: 100 - total flux cleaned = 0.000282995 Jy ! Component: 150 - total flux cleaned = 0.000302981 Jy ! Component: 200 - total flux cleaned = 0.000303174 Jy ! Total flux subtracted in 200 components = 0.000303174 Jy ! Clean residual min=-0.002745 max=0.002540 Jy/beam ! Clean residual mean=0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.17809 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.17809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076241Jy sigma=0.000895 ! Fit after self-cal, rms=0.076233Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72646e-05 Jy ! Component: 100 - total flux cleaned = -6.16166e-07 Jy ! Component: 150 - total flux cleaned = -1.74991e-05 Jy ! Component: 200 - total flux cleaned = -3.37458e-05 Jy ! Total flux subtracted in 200 components = -3.37458e-05 Jy ! Clean residual min=-0.002743 max=0.002555 Jy/beam ! Clean residual mean=0.000003 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.178056 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.178056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076223Jy sigma=0.000895 ! Fit after self-cal, rms=0.076224Jy sigma=0.000895 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076224Jy sigma=0.000895 ! Fit after self-cal, rms=0.076191Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.679 mas, bmaj=13.72 mas, bpa=4.346 degrees ! Estimated noise=824.871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391034 Jy ! Component: 100 - total flux cleaned = 0.000412546 Jy ! Component: 150 - total flux cleaned = 0.000455278 Jy ! Component: 200 - total flux cleaned = 0.000493333 Jy ! Total flux subtracted in 200 components = 0.000493333 Jy ! Clean residual min=-0.002144 max=0.002525 Jy/beam ! Clean residual mean=0.000006 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.178549 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.178549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076204Jy sigma=0.000895 ! Fit after self-cal, rms=0.076189Jy sigma=0.000895 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.42572e-07 Jy ! Component: 100 - total flux cleaned = 1.83385e-05 Jy ! Component: 150 - total flux cleaned = 3.14875e-05 Jy ! Component: 200 - total flux cleaned = 5.0697e-05 Jy ! Total flux subtracted in 200 components = 5.0697e-05 Jy ! Clean residual min=-0.002133 max=0.002532 Jy/beam ! Clean residual mean=0.000006 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.1786 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.1786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076203Jy sigma=0.000895 ! Fit after self-cal, rms=0.076194Jy sigma=0.000895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=6.607 mas, bpa=-0.6293 degrees ! Estimated noise=676.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 6.607 at -0.6293 degrees (North through East) ! Clean map min=-0.0025957 max=0.14372 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=5.763 mas, bpa=1.666 degrees ! Estimated noise=1241.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106484 Jy ! Component: 100 - total flux cleaned = 0.139797 Jy ! Component: 150 - total flux cleaned = 0.156883 Jy ! Component: 200 - total flux cleaned = 0.166226 Jy ! Total flux subtracted in 200 components = 0.166226 Jy ! Clean residual min=-0.005193 max=0.004965 Jy/beam ! Clean residual mean=-0.000004 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.166226 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.166226 Jy ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=6.607 mas, bpa=-0.6293 degrees ! Estimated noise=676.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618372 Jy ! Component: 100 - total flux cleaned = 0.00917289 Jy ! Component: 150 - total flux cleaned = 0.0107365 Jy ! Component: 200 - total flux cleaned = 0.0112962 Jy ! Total flux subtracted in 200 components = 0.0112962 Jy ! Clean residual min=-0.002854 max=0.002684 Jy/beam ! Clean residual mean=0.000003 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.177522 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.177522 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.679 mas, bmaj=13.72 mas, bpa=4.346 degrees ! Estimated noise=824.871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000603478 Jy ! Component: 100 - total flux cleaned = 0.000682571 Jy ! Component: 150 - total flux cleaned = 0.000725557 Jy ! Component: 200 - total flux cleaned = 0.000799112 Jy ! Total flux subtracted in 200 components = 0.000799112 Jy ! Clean residual min=-0.002223 max=0.002547 Jy/beam ! Clean residual mean=0.000006 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.178321 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.10347e-05 Jy ! Component: 100 - total flux cleaned = 0.000112986 Jy ! Component: 150 - total flux cleaned = 0.000146754 Jy ! Component: 200 - total flux cleaned = 0.000185968 Jy ! Total flux subtracted in 200 components = 0.000185968 Jy ! Clean residual min=-0.002147 max=0.002557 Jy/beam ! Clean residual mean=0.000006 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.178507 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.178507 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=6.607 mas, bpa=-0.6293 degrees ! Estimated noise=676.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180889 Jy ! Component: 100 - total flux cleaned = -0.000354592 Jy ! Component: 150 - total flux cleaned = -0.000485369 Jy ! Component: 200 - total flux cleaned = -0.00055309 Jy ! Total flux subtracted in 200 components = -0.00055309 Jy ! Clean residual min=-0.002808 max=0.002573 Jy/beam ! Clean residual mean=0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.177954 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.177954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076205Jy sigma=0.000895 ! Fit after self-cal, rms=0.076198Jy sigma=0.000895 wmodel J0630-1323_S_2014_01_04_pus_map.mod ! Writing 50 model components to file: J0630-1323_S_2014_01_04_pus_map.mod wobs J0630-1323_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0630-1323_S_2014_01_04_pus_uvs.fits wwins J0630-1323_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0630-1323_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000512955 Jy ! Component: 100 - total flux cleaned = -0.000644351 Jy ! Component: 150 - total flux cleaned = -0.000603716 Jy ! Component: 200 - total flux cleaned = -0.000491094 Jy ! Component: 250 - total flux cleaned = -0.000419032 Jy ! Component: 300 - total flux cleaned = -0.000418612 Jy ! Component: 350 - total flux cleaned = -0.000418875 Jy ! Component: 400 - total flux cleaned = -0.000482384 Jy ! Component: 450 - total flux cleaned = -0.000389669 Jy ! Component: 500 - total flux cleaned = -0.000301274 Jy ! Component: 550 - total flux cleaned = -0.000243878 Jy ! Component: 600 - total flux cleaned = -0.000216165 Jy ! Component: 650 - total flux cleaned = -0.000107534 Jy ! Component: 700 - total flux cleaned = -8.12887e-05 Jy ! Component: 750 - total flux cleaned = -8.13345e-05 Jy ! Component: 800 - total flux cleaned = -5.66947e-05 Jy ! Component: 850 - total flux cleaned = -0.000130832 Jy ! Component: 900 - total flux cleaned = -0.000154474 Jy ! Component: 950 - total flux cleaned = -0.000131381 Jy ! Component: 1000 - total flux cleaned = -0.000154943 Jy ! Component: 1050 - total flux cleaned = -0.000177186 Jy ! Component: 1100 - total flux cleaned = -0.000177021 Jy ! Component: 1150 - total flux cleaned = -0.000177232 Jy ! Component: 1200 - total flux cleaned = -0.000219763 Jy ! Component: 1250 - total flux cleaned = -0.000219997 Jy ! Component: 1300 - total flux cleaned = -0.000220146 Jy ! Component: 1350 - total flux cleaned = -0.000200317 Jy ! Component: 1400 - total flux cleaned = -0.000259654 Jy ! Component: 1450 - total flux cleaned = -0.000240225 Jy ! Component: 1500 - total flux cleaned = -0.000335868 Jy ! Component: 1550 - total flux cleaned = -0.000298008 Jy ! Component: 1600 - total flux cleaned = -0.000279899 Jy ! Component: 1650 - total flux cleaned = -0.000316545 Jy ! Component: 1700 - total flux cleaned = -0.000388308 Jy ! Component: 1750 - total flux cleaned = -0.000405153 Jy ! Component: 1800 - total flux cleaned = -0.000352959 Jy ! Component: 1850 - total flux cleaned = -0.000404575 Jy ! Component: 1900 - total flux cleaned = -0.000387505 Jy ! Component: 1950 - total flux cleaned = -0.000403735 Jy ! Component: 2000 - total flux cleaned = -0.000337606 Jy ! Component: 2050 - total flux cleaned = -0.000337435 Jy ! Component: 2100 - total flux cleaned = -0.000337295 Jy ! Component: 2150 - total flux cleaned = -0.000368971 Jy ! Component: 2200 - total flux cleaned = -0.000400368 Jy ! Component: 2250 - total flux cleaned = -0.000400282 Jy ! Component: 2300 - total flux cleaned = -0.000385217 Jy ! Component: 2350 - total flux cleaned = -0.000475964 Jy ! Component: 2400 - total flux cleaned = -0.000461183 Jy ! Component: 2450 - total flux cleaned = -0.000520392 Jy ! Component: 2500 - total flux cleaned = -0.000549729 Jy ! Component: 2550 - total flux cleaned = -0.000621868 Jy ! Component: 2600 - total flux cleaned = -0.000650273 Jy ! Component: 2650 - total flux cleaned = -0.000678431 Jy ! Component: 2700 - total flux cleaned = -0.000734185 Jy ! Component: 2750 - total flux cleaned = -0.000747983 Jy ! Component: 2800 - total flux cleaned = -0.000788915 Jy ! Component: 2850 - total flux cleaned = -0.000883416 Jy ! Component: 2900 - total flux cleaned = -0.000829888 Jy ! Component: 2950 - total flux cleaned = -0.000882881 Jy ! Component: 3000 - total flux cleaned = -0.000909142 Jy ! Component: 3050 - total flux cleaned = -0.000948183 Jy ! Component: 3100 - total flux cleaned = -0.000961131 Jy ! Component: 3150 - total flux cleaned = -0.000986724 Jy ! Component: 3200 - total flux cleaned = -0.00101206 Jy ! Component: 3250 - total flux cleaned = -0.00102464 Jy ! Component: 3300 - total flux cleaned = -0.0010371 Jy ! Component: 3350 - total flux cleaned = -0.00104951 Jy ! Component: 3400 - total flux cleaned = -0.00109863 Jy ! Component: 3450 - total flux cleaned = -0.00111076 Jy ! Component: 3500 - total flux cleaned = -0.00112289 Jy ! Component: 3550 - total flux cleaned = -0.00115885 Jy ! Component: 3600 - total flux cleaned = -0.00119451 Jy ! Component: 3650 - total flux cleaned = -0.0011828 Jy ! Component: 3700 - total flux cleaned = -0.00124118 Jy ! Component: 3750 - total flux cleaned = -0.00124119 Jy ! Component: 3800 - total flux cleaned = -0.00125265 Jy ! Component: 3850 - total flux cleaned = -0.00130994 Jy ! Component: 3900 - total flux cleaned = -0.00135532 Jy ! Component: 3950 - total flux cleaned = -0.00133278 Jy ! Component: 4000 - total flux cleaned = -0.00136632 Jy ! Component: 4050 - total flux cleaned = -0.00136621 Jy ! Total flux subtracted in 4096 components = -0.00138836 Jy ! Clean residual min=-0.000708 max=0.000764 Jy/beam ! Clean residual mean=0.000002 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.176566 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 292 components and 0.176566 Jy ![Exited script file: muppet] wmap "J0630-1323_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 6.607 at -0.6293 degrees (North through East) ! Clean map min=-0.0023506 max=0.14422 Jy/beam ! Writing clean map to FITS file: J0630-1323_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144219 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019265 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.400745 0.400745 0.80149 1.60298 3.20596 6.41192 12.8238 25.6477 51.2954 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 6.607 at -0.6293 degrees (North through East) ! Clean map min=-0.0023506 max=0.14422 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0630-1323_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:19:01 2017