! Started logfile: J0627-3529_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:52 2017 obs J0627-3529_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0627-3529_S_2014_01_04_pus_uva.fits ! AN table 1: 84 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0627-3529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7056 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0627-3529_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.847145Jy sigma=0.007034 ! Fit after self-cal, rms=0.772180Jy sigma=0.006527 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.407 mas, bmaj=6.237 mas, bpa=0.4724 degrees ! Estimated noise=1601.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192332 Jy ! Component: 100 - total flux cleaned = 0.250127 Jy ! Total flux subtracted in 100 components = 0.250127 Jy ! Clean residual min=-0.022792 max=0.033063 Jy/beam ! Clean residual mean=-0.000308 rms=0.006093 Jy/beam ! Combined flux in latest and established models = 0.250127 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.250127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225483Jy sigma=0.001146 ! Fit after self-cal, rms=0.225333Jy sigma=0.001145 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.852 mas, bmaj=7.403 mas, bpa=0.7584 degrees ! Estimated noise=1014.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355189 Jy ! Component: 100 - total flux cleaned = 0.0518316 Jy ! Component: 150 - total flux cleaned = 0.0599233 Jy ! Component: 200 - total flux cleaned = 0.0611524 Jy ! Total flux subtracted in 200 components = 0.0611524 Jy ! Clean residual min=-0.020281 max=0.020100 Jy/beam ! Clean residual mean=-0.000443 rms=0.005735 Jy/beam ! Combined flux in latest and established models = 0.31128 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.31128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217108Jy sigma=0.001092 ! Fit after self-cal, rms=0.217071Jy sigma=0.001091 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 1.03 ! MK 0.95 NL 1.18 OV 0.97 PT 0.98 ! SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.98 ! MK 0.98 NL 1.21 OV 1.00 PT 0.96 ! SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.81 ! MK 0.98 NL 1.17 OV 0.94 PT 0.95 ! SC 0.89 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00* KP 1.00* LA 0.90 ! MK 0.97 NL 1.29 OV 0.98 PT 0.99 ! SC 0.79 ! ! ! Fit before self-cal, rms=0.217071Jy sigma=0.001091 ! Fit after self-cal, rms=0.216860Jy sigma=0.001047 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=7.199 mas, bpa=1.971 degrees ! Estimated noise=1006.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00923925 Jy ! Component: 100 - total flux cleaned = 0.0107724 Jy ! Component: 150 - total flux cleaned = 0.0107742 Jy ! Component: 200 - total flux cleaned = 0.0107801 Jy ! Total flux subtracted in 200 components = 0.0107801 Jy ! Clean residual min=-0.020385 max=0.017648 Jy/beam ! Clean residual mean=-0.000200 rms=0.005074 Jy/beam ! Combined flux in latest and established models = 0.32206 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.32206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215559Jy sigma=0.001047 ! Fit after self-cal, rms=0.215698Jy sigma=0.001046 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215698Jy sigma=0.001046 ! Fit after self-cal, rms=0.222643Jy sigma=0.001027 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=7.232 mas, bpa=1.546 degrees ! Estimated noise=1031.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00930192 Jy ! Component: 100 - total flux cleaned = 0.013767 Jy ! Component: 150 - total flux cleaned = 0.0144358 Jy ! Component: 200 - total flux cleaned = 0.014814 Jy ! Total flux subtracted in 200 components = 0.014814 Jy ! Clean residual min=-0.017347 max=0.017200 Jy/beam ! Clean residual mean=-0.000136 rms=0.004640 Jy/beam ! Combined flux in latest and established models = 0.336874 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.336874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221469Jy sigma=0.001026 ! Fit after self-cal, rms=0.221434Jy sigma=0.001026 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.33588e-05 Jy ! Component: 100 - total flux cleaned = -1.68032e-06 Jy ! Component: 150 - total flux cleaned = -2.88224e-06 Jy ! Component: 200 - total flux cleaned = -7.88045e-05 Jy ! Total flux subtracted in 200 components = -7.88045e-05 Jy ! Clean residual min=-0.016825 max=0.017056 Jy/beam ! Clean residual mean=-0.000138 rms=0.004627 Jy/beam ! Combined flux in latest and established models = 0.336795 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.336795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221284Jy sigma=0.001026 ! Fit after self-cal, rms=0.221260Jy sigma=0.001026 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221260Jy sigma=0.001026 ! Fit after self-cal, rms=0.173314Jy sigma=0.000986 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.739 mas, bmaj=7.382 mas, bpa=0.7682 degrees ! Estimated noise=1043.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347361 Jy ! Component: 100 - total flux cleaned = 0.00452636 Jy ! Component: 150 - total flux cleaned = 0.0048959 Jy ! Component: 200 - total flux cleaned = 0.00511 Jy ! Total flux subtracted in 200 components = 0.00511 Jy ! Clean residual min=-0.010694 max=0.014541 Jy/beam ! Clean residual mean=-0.000174 rms=0.003625 Jy/beam ! Combined flux in latest and established models = 0.341905 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.341905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173176Jy sigma=0.000986 ! Fit after self-cal, rms=0.173115Jy sigma=0.000985 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198753 Jy ! Component: 100 - total flux cleaned = 0.000395231 Jy ! Component: 150 - total flux cleaned = 0.000534196 Jy ! Component: 200 - total flux cleaned = 0.000620946 Jy ! Total flux subtracted in 200 components = 0.000620946 Jy ! Clean residual min=-0.010850 max=0.014463 Jy/beam ! Clean residual mean=-0.000172 rms=0.003623 Jy/beam ! Combined flux in latest and established models = 0.342526 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.342526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173088Jy sigma=0.000985 ! Fit after self-cal, rms=0.173110Jy sigma=0.000985 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173110Jy sigma=0.000985 ! Fit after self-cal, rms=0.177705Jy sigma=0.000985 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.507 mas, bmaj=22.23 mas, bpa=5.198 degrees ! Estimated noise=1381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689237 Jy ! Component: 100 - total flux cleaned = 0.00698874 Jy ! Component: 150 - total flux cleaned = 0.00698008 Jy ! Component: 200 - total flux cleaned = 0.00697519 Jy ! Total flux subtracted in 200 components = 0.00697519 Jy ! Clean residual min=-0.017241 max=0.023996 Jy/beam ! Clean residual mean=-0.000389 rms=0.007526 Jy/beam ! Combined flux in latest and established models = 0.349501 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.349501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177716Jy sigma=0.000986 ! Fit after self-cal, rms=0.177663Jy sigma=0.000985 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000458859 Jy ! Component: 100 - total flux cleaned = -0.00042946 Jy ! Component: 150 - total flux cleaned = -0.000415915 Jy ! Component: 200 - total flux cleaned = -0.00041507 Jy ! Total flux subtracted in 200 components = -0.00041507 Jy ! Clean residual min=-0.016870 max=0.023813 Jy/beam ! Clean residual mean=-0.000394 rms=0.007511 Jy/beam ! Combined flux in latest and established models = 0.349086 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.349086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177725Jy sigma=0.000985 ! Fit after self-cal, rms=0.177605Jy sigma=0.000984 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.396 mas, bpa=0.6271 degrees ! Estimated noise=1054.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 7.396 at 0.6271 degrees (North through East) ! Clean map min=-0.010215 max=0.26095 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=6.25 mas, bpa=0.4361 degrees ! Estimated noise=1651.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199676 Jy ! Component: 100 - total flux cleaned = 0.263991 Jy ! Component: 150 - total flux cleaned = 0.295318 Jy ! Component: 200 - total flux cleaned = 0.314478 Jy ! Total flux subtracted in 200 components = 0.314478 Jy ! Clean residual min=-0.012768 max=0.016689 Jy/beam ! Clean residual mean=-0.000161 rms=0.003640 Jy/beam ! Combined flux in latest and established models = 0.314478 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.314478 Jy ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.396 mas, bpa=0.6271 degrees ! Estimated noise=1054.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0181363 Jy ! Component: 100 - total flux cleaned = 0.0268607 Jy ! Component: 150 - total flux cleaned = 0.0308078 Jy ! Component: 200 - total flux cleaned = 0.0314403 Jy ! Total flux subtracted in 200 components = 0.0314403 Jy ! Clean residual min=-0.011821 max=0.015218 Jy/beam ! Clean residual mean=-0.000173 rms=0.003701 Jy/beam ! Combined flux in latest and established models = 0.345919 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 32 components and 0.345919 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.507 mas, bmaj=22.23 mas, bpa=5.198 degrees ! Estimated noise=1381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333022 Jy ! Component: 100 - total flux cleaned = 0.00331739 Jy ! Component: 150 - total flux cleaned = 0.00330925 Jy ! Component: 200 - total flux cleaned = 0.0033039 Jy ! Total flux subtracted in 200 components = 0.0033039 Jy ! Clean residual min=-0.016779 max=0.023696 Jy/beam ! Clean residual mean=-0.000390 rms=0.007509 Jy/beam ! Combined flux in latest and established models = 0.349223 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.77746e-06 Jy ! Component: 100 - total flux cleaned = -6.37541e-06 Jy ! Component: 150 - total flux cleaned = -7.1254e-06 Jy ! Component: 200 - total flux cleaned = -7.65606e-06 Jy ! Total flux subtracted in 200 components = -7.65606e-06 Jy ! Clean residual min=-0.016691 max=0.023659 Jy/beam ! Clean residual mean=-0.000390 rms=0.007503 Jy/beam ! Combined flux in latest and established models = 0.349215 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.349215 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=7.396 mas, bpa=0.6271 degrees ! Estimated noise=1054.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179253 Jy ! Component: 100 - total flux cleaned = -0.00160927 Jy ! Component: 150 - total flux cleaned = -0.00126096 Jy ! Component: 200 - total flux cleaned = -0.00109189 Jy ! Total flux subtracted in 200 components = -0.00109189 Jy ! Clean residual min=-0.011517 max=0.014715 Jy/beam ! Clean residual mean=-0.000167 rms=0.003653 Jy/beam ! Combined flux in latest and established models = 0.348123 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.348123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177911Jy sigma=0.000985 ! Fit after self-cal, rms=0.177802Jy sigma=0.000984 wmodel J0627-3529_S_2014_01_04_pus_map.mod ! Writing 42 model components to file: J0627-3529_S_2014_01_04_pus_map.mod wobs J0627-3529_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0627-3529_S_2014_01_04_pus_uvs.fits wwins J0627-3529_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0627-3529_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620604 Jy ! Component: 100 - total flux cleaned = 0.00953228 Jy ! Component: 150 - total flux cleaned = 0.0104374 Jy ! Component: 200 - total flux cleaned = 0.0112705 Jy ! Component: 250 - total flux cleaned = 0.0120369 Jy ! Component: 300 - total flux cleaned = 0.011892 Jy ! Component: 350 - total flux cleaned = 0.0118878 Jy ! Component: 400 - total flux cleaned = 0.0117555 Jy ! Component: 450 - total flux cleaned = 0.0115096 Jy ! Component: 500 - total flux cleaned = 0.0108203 Jy ! Component: 550 - total flux cleaned = 0.0107151 Jy ! Component: 600 - total flux cleaned = 0.0101918 Jy ! Component: 650 - total flux cleaned = 0.00989301 Jy ! Component: 700 - total flux cleaned = 0.00979612 Jy ! Component: 750 - total flux cleaned = 0.00942783 Jy ! Component: 800 - total flux cleaned = 0.00925092 Jy ! Component: 850 - total flux cleaned = 0.0087422 Jy ! Component: 900 - total flux cleaned = 0.00874687 Jy ! Component: 950 - total flux cleaned = 0.00866677 Jy ! Component: 1000 - total flux cleaned = 0.00836185 Jy ! Component: 1050 - total flux cleaned = 0.00836061 Jy ! Component: 1100 - total flux cleaned = 0.00821553 Jy ! Component: 1150 - total flux cleaned = 0.00814478 Jy ! Component: 1200 - total flux cleaned = 0.00788136 Jy ! Component: 1250 - total flux cleaned = 0.0077548 Jy ! Component: 1300 - total flux cleaned = 0.0076303 Jy ! Component: 1350 - total flux cleaned = 0.00750747 Jy ! Component: 1400 - total flux cleaned = 0.00727253 Jy ! Component: 1450 - total flux cleaned = 0.00721636 Jy ! Component: 1500 - total flux cleaned = 0.0072723 Jy ! Component: 1550 - total flux cleaned = 0.00727193 Jy ! Component: 1600 - total flux cleaned = 0.00748297 Jy ! Component: 1650 - total flux cleaned = 0.00758561 Jy ! Component: 1700 - total flux cleaned = 0.00773775 Jy ! Component: 1750 - total flux cleaned = 0.00778744 Jy ! Component: 1800 - total flux cleaned = 0.00778762 Jy ! Component: 1850 - total flux cleaned = 0.00774027 Jy ! Component: 1900 - total flux cleaned = 0.00760218 Jy ! Component: 1950 - total flux cleaned = 0.00746736 Jy ! Component: 2000 - total flux cleaned = 0.00751215 Jy ! Component: 2050 - total flux cleaned = 0.0075113 Jy ! Component: 2100 - total flux cleaned = 0.00738277 Jy ! Component: 2150 - total flux cleaned = 0.00738265 Jy ! Component: 2200 - total flux cleaned = 0.00726007 Jy ! Component: 2250 - total flux cleaned = 0.00730045 Jy ! Component: 2300 - total flux cleaned = 0.00730081 Jy ! Component: 2350 - total flux cleaned = 0.00722371 Jy ! Component: 2400 - total flux cleaned = 0.00718629 Jy ! Component: 2450 - total flux cleaned = 0.00714904 Jy ! Component: 2500 - total flux cleaned = 0.007112 Jy ! Component: 2550 - total flux cleaned = 0.00703994 Jy ! Component: 2600 - total flux cleaned = 0.00711178 Jy ! Component: 2650 - total flux cleaned = 0.00718172 Jy ! Component: 2700 - total flux cleaned = 0.00718121 Jy ! Component: 2750 - total flux cleaned = 0.00718136 Jy ! Component: 2800 - total flux cleaned = 0.00724901 Jy ! Component: 2850 - total flux cleaned = 0.00721588 Jy ! Component: 2900 - total flux cleaned = 0.00724884 Jy ! Component: 2950 - total flux cleaned = 0.00721672 Jy ! Component: 3000 - total flux cleaned = 0.00718501 Jy ! Component: 3050 - total flux cleaned = 0.00712255 Jy ! Component: 3100 - total flux cleaned = 0.00712282 Jy ! Component: 3150 - total flux cleaned = 0.0070303 Jy ! Component: 3200 - total flux cleaned = 0.00699965 Jy ! Component: 3250 - total flux cleaned = 0.00693895 Jy ! Component: 3300 - total flux cleaned = 0.00681914 Jy ! Component: 3350 - total flux cleaned = 0.00673046 Jy ! Component: 3400 - total flux cleaned = 0.00667206 Jy ! Component: 3450 - total flux cleaned = 0.00667213 Jy ! Component: 3500 - total flux cleaned = 0.00655658 Jy ! Component: 3550 - total flux cleaned = 0.00649929 Jy ! Component: 3600 - total flux cleaned = 0.00641399 Jy ! Component: 3650 - total flux cleaned = 0.00638586 Jy ! Component: 3700 - total flux cleaned = 0.00630176 Jy ! Component: 3750 - total flux cleaned = 0.00630181 Jy ! Component: 3800 - total flux cleaned = 0.00621893 Jy ! Component: 3850 - total flux cleaned = 0.00616406 Jy ! Component: 3900 - total flux cleaned = 0.00613684 Jy ! Component: 3950 - total flux cleaned = 0.00610949 Jy ! Component: 4000 - total flux cleaned = 0.0060555 Jy ! Component: 4050 - total flux cleaned = 0.00602873 Jy ! Total flux subtracted in 4096 components = 0.00608231 Jy ! Clean residual min=-0.001987 max=0.001706 Jy/beam ! Clean residual mean=-0.000007 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.354205 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 368 components and 0.354205 Jy ![Exited script file: muppet] wmap "J0627-3529_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 7.396 at 0.6271 degrees (North through East) ! Clean map min=-0.0039106 max=0.25763 Jy/beam ! Writing clean map to FITS file: J0627-3529_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.257631 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000452447 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.526854 0.526854 1.05371 2.10742 4.21483 8.42967 16.8593 33.7187 67.4374 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.257 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 7.396 at 0.6271 degrees (North through East) ! Clean map min=-0.0039106 max=0.25763 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0627-3529_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:18:56 2017