! Started logfile: J0626-1512_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:28 2017 obs J0626-1512_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0626-1512_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781421 visibilities/baseline/integration-bin. ! Found source: J0626-1512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0626-1512_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925555Jy sigma=0.008851 ! Fit after self-cal, rms=0.877725Jy sigma=0.008506 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=7.132 mas, bpa=0.6303 degrees ! Estimated noise=1044.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103161 Jy ! Component: 100 - total flux cleaned = 0.126501 Jy ! Total flux subtracted in 100 components = 0.126501 Jy ! Clean residual min=-0.006074 max=0.008456 Jy/beam ! Clean residual mean=-0.000028 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 0.126501 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.126501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175926Jy sigma=0.000812 ! Fit after self-cal, rms=0.175926Jy sigma=0.000812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=8 mas, bpa=0.5814 degrees ! Estimated noise=611.434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119726 Jy ! Component: 100 - total flux cleaned = 0.0174034 Jy ! Component: 150 - total flux cleaned = 0.0200438 Jy ! Component: 200 - total flux cleaned = 0.0211108 Jy ! Total flux subtracted in 200 components = 0.0211108 Jy ! Clean residual min=-0.005303 max=0.008583 Jy/beam ! Clean residual mean=-0.000012 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.147612 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.147612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174913Jy sigma=0.000798 ! Fit after self-cal, rms=0.174895Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.97 KP 1.03 ! LA 1.25 MK 0.99 NL 1.05 OV 0.93 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.69 HN 1.04 KP 0.98 ! LA 1.17 MK 0.97 NL 1.16 OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.04 HN 1.02 KP 0.85 ! LA 0.94 MK 1.03 NL 1.16 OV 0.92 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.07 HN 0.99 KP 0.80 ! LA 1.07 MK 1.06 NL 1.07 OV 0.97 ! PT 0.98 SC 0.97 ! ! ! Fit before self-cal, rms=0.174895Jy sigma=0.000798 ! Fit after self-cal, rms=0.171818Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.019 mas, bpa=0.8299 degrees ! Estimated noise=611.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296788 Jy ! Component: 100 - total flux cleaned = 0.000331565 Jy ! Component: 150 - total flux cleaned = 0.00039651 Jy ! Component: 200 - total flux cleaned = 0.000453038 Jy ! Total flux subtracted in 200 components = 0.000453038 Jy ! Clean residual min=-0.004714 max=0.004729 Jy/beam ! Clean residual mean=-0.000017 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.148065 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.148065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171787Jy sigma=0.000782 ! Fit after self-cal, rms=0.171984Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171984Jy sigma=0.000781 ! Fit after self-cal, rms=0.161801Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=8.034 mas, bpa=0.8351 degrees ! Estimated noise=612.113 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000817246 Jy ! Component: 100 - total flux cleaned = 0.000888448 Jy ! Component: 150 - total flux cleaned = 0.00091676 Jy ! Component: 200 - total flux cleaned = 0.000989653 Jy ! Total flux subtracted in 200 components = 0.000989653 Jy ! Clean residual min=-0.002460 max=0.004494 Jy/beam ! Clean residual mean=0.000002 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.149054 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.149054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161784Jy sigma=0.000770 ! Fit after self-cal, rms=0.161850Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412587 Jy ! Component: 100 - total flux cleaned = 0.00576149 Jy ! Component: 150 - total flux cleaned = 0.00572159 Jy ! Component: 200 - total flux cleaned = 0.00559146 Jy ! Total flux subtracted in 200 components = 0.00559146 Jy ! Clean residual min=-0.001994 max=0.002264 Jy/beam ! Clean residual mean=-0.000001 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.154646 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 58 components and 0.154646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161768Jy sigma=0.000768 ! Fit after self-cal, rms=0.161795Jy sigma=0.000768 ! Inverting map ! Added new window around map position (-25, 127). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199377 Jy ! Component: 100 - total flux cleaned = 0.00305566 Jy ! Component: 150 - total flux cleaned = 0.00351006 Jy ! Component: 200 - total flux cleaned = 0.00360992 Jy ! Total flux subtracted in 200 components = 0.00360992 Jy ! Clean residual min=-0.002007 max=0.002046 Jy/beam ! Clean residual mean=-0.000003 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.158256 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 86 components and 0.158256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161757Jy sigma=0.000767 ! Fit after self-cal, rms=0.161757Jy sigma=0.000767 ! Inverting map ! Added new window around map position (-64.5, 58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181039 Jy ! Component: 100 - total flux cleaned = 0.0027443 Jy ! Component: 150 - total flux cleaned = 0.00339859 Jy ! Component: 200 - total flux cleaned = 0.00382309 Jy ! Total flux subtracted in 200 components = 0.00382309 Jy ! Clean residual min=-0.002055 max=0.001827 Jy/beam ! Clean residual mean=-0.000002 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.162079 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 114 components and 0.162079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161718Jy sigma=0.000767 ! Fit after self-cal, rms=0.161706Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161706Jy sigma=0.000767 ! Fit after self-cal, rms=0.161345Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=8.031 mas, bpa=0.9197 degrees ! Estimated noise=609.752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010597 Jy ! Component: 100 - total flux cleaned = 0.00148284 Jy ! Component: 150 - total flux cleaned = 0.00172568 Jy ! Component: 200 - total flux cleaned = 0.00184213 Jy ! Total flux subtracted in 200 components = 0.00184213 Jy ! Clean residual min=-0.001786 max=0.001673 Jy/beam ! Clean residual mean=-0.000001 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.163921 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 142 components and 0.163921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161333Jy sigma=0.000767 ! Fit after self-cal, rms=0.161324Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334918 Jy ! Component: 100 - total flux cleaned = 0.000507537 Jy ! Component: 150 - total flux cleaned = 0.000585396 Jy ! Component: 200 - total flux cleaned = 0.000658844 Jy ! Total flux subtracted in 200 components = 0.000658844 Jy ! Clean residual min=-0.001785 max=0.001677 Jy/beam ! Clean residual mean=-0.000001 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.16458 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 159 components and 0.16458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161315Jy sigma=0.000766 ! Fit after self-cal, rms=0.161316Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161316Jy sigma=0.000766 ! Fit after self-cal, rms=0.161178Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.958 mas, bmaj=13.88 mas, bpa=0.4302 degrees ! Estimated noise=824.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000457906 Jy ! Component: 100 - total flux cleaned = 0.000573931 Jy ! Component: 150 - total flux cleaned = 0.000665226 Jy ! Component: 200 - total flux cleaned = 0.000745865 Jy ! Total flux subtracted in 200 components = 0.000745865 Jy ! Clean residual min=-0.001949 max=0.001846 Jy/beam ! Clean residual mean=-0.000003 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.165326 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 182 components and 0.165326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161171Jy sigma=0.000766 ! Fit after self-cal, rms=0.161169Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105855 Jy ! Component: 100 - total flux cleaned = 0.000250521 Jy ! Component: 150 - total flux cleaned = 0.000293625 Jy ! Component: 200 - total flux cleaned = 0.000293198 Jy ! Total flux subtracted in 200 components = 0.000293198 Jy ! Clean residual min=-0.001893 max=0.001891 Jy/beam ! Clean residual mean=-0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.165619 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 195 components and 0.165619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161166Jy sigma=0.000766 ! Fit after self-cal, rms=0.161166Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.033 mas, bpa=0.9411 degrees ! Estimated noise=609.598 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.033 at 0.9411 degrees (North through East) ! Clean map min=-0.0016622 max=0.13516 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=7.173 mas, bpa=1.034 degrees ! Estimated noise=1040.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102493 Jy ! Component: 100 - total flux cleaned = 0.126248 Jy ! Component: 150 - total flux cleaned = 0.136519 Jy ! Component: 200 - total flux cleaned = 0.142818 Jy ! Total flux subtracted in 200 components = 0.142818 Jy ! Clean residual min=-0.003657 max=0.003836 Jy/beam ! Clean residual mean=-0.000011 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.142818 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.142818 Jy ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.033 mas, bpa=0.9411 degrees ! Estimated noise=609.598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565809 Jy ! Component: 100 - total flux cleaned = 0.00898129 Jy ! Component: 150 - total flux cleaned = 0.0114671 Jy ! Component: 200 - total flux cleaned = 0.0134594 Jy ! Total flux subtracted in 200 components = 0.0134594 Jy ! Clean residual min=-0.001673 max=0.001986 Jy/beam ! Clean residual mean=-0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.156277 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 49 components and 0.156277 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.958 mas, bmaj=13.88 mas, bpa=0.4302 degrees ! Estimated noise=824.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244929 Jy ! Component: 100 - total flux cleaned = 0.00408715 Jy ! Component: 150 - total flux cleaned = 0.00532348 Jy ! Component: 200 - total flux cleaned = 0.00628365 Jy ! Total flux subtracted in 200 components = 0.00628365 Jy ! Clean residual min=-0.001900 max=0.001728 Jy/beam ! Clean residual mean=-0.000004 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.162561 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773538 Jy ! Component: 100 - total flux cleaned = 0.00139104 Jy ! Component: 150 - total flux cleaned = 0.00178598 Jy ! Component: 200 - total flux cleaned = 0.00211278 Jy ! Total flux subtracted in 200 components = 0.00211278 Jy ! Clean residual min=-0.002070 max=0.001791 Jy/beam ! Clean residual mean=-0.000003 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.164674 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 127 components and 0.164674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=8.033 mas, bpa=0.9411 degrees ! Estimated noise=609.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000790717 Jy ! Component: 100 - total flux cleaned = 0.00104705 Jy ! Component: 150 - total flux cleaned = 0.00114442 Jy ! Component: 200 - total flux cleaned = 0.00108571 Jy ! Total flux subtracted in 200 components = 0.00108571 Jy ! Clean residual min=-0.001672 max=0.001689 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.165759 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 159 components and 0.165759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161194Jy sigma=0.000767 ! Fit after self-cal, rms=0.161189Jy sigma=0.000767 wmodel J0626-1512_S_2015_01_23_pus_map.mod ! Writing 159 model components to file: J0626-1512_S_2015_01_23_pus_map.mod wobs J0626-1512_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0626-1512_S_2015_01_23_pus_uvs.fits wwins J0626-1512_S_2015_01_23_pus_map.win ! wwins: Wrote 4 windows to J0626-1512_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161449 Jy ! Component: 100 - total flux cleaned = 0.000189288 Jy ! Component: 150 - total flux cleaned = 0.000214676 Jy ! Component: 200 - total flux cleaned = 0.000238641 Jy ! Component: 250 - total flux cleaned = 0.000355533 Jy ! Component: 300 - total flux cleaned = 0.000423126 Jy ! Component: 350 - total flux cleaned = 0.000423216 Jy ! Component: 400 - total flux cleaned = 0.000444635 Jy ! Component: 450 - total flux cleaned = 0.000424135 Jy ! Component: 500 - total flux cleaned = 0.000424614 Jy ! Component: 550 - total flux cleaned = 0.000483675 Jy ! Component: 600 - total flux cleaned = 0.000522316 Jy ! Component: 650 - total flux cleaned = 0.000579236 Jy ! Component: 700 - total flux cleaned = 0.000653827 Jy ! Component: 750 - total flux cleaned = 0.000744772 Jy ! Component: 800 - total flux cleaned = 0.00079813 Jy ! Component: 850 - total flux cleaned = 0.000797951 Jy ! Component: 900 - total flux cleaned = 0.000884518 Jy ! Component: 950 - total flux cleaned = 0.00090115 Jy ! Component: 1000 - total flux cleaned = 0.000968372 Jy ! Component: 1050 - total flux cleaned = 0.000968402 Jy ! Component: 1100 - total flux cleaned = 0.00100097 Jy ! Component: 1150 - total flux cleaned = 0.00103324 Jy ! Component: 1200 - total flux cleaned = 0.00103322 Jy ! Component: 1250 - total flux cleaned = 0.00108056 Jy ! Component: 1300 - total flux cleaned = 0.0010805 Jy ! Component: 1350 - total flux cleaned = 0.00109575 Jy ! Component: 1400 - total flux cleaned = 0.00114077 Jy ! Component: 1450 - total flux cleaned = 0.00114087 Jy ! Component: 1500 - total flux cleaned = 0.00119985 Jy ! Component: 1550 - total flux cleaned = 0.00131625 Jy ! Component: 1600 - total flux cleaned = 0.00127309 Jy ! Component: 1650 - total flux cleaned = 0.00134437 Jy ! Component: 1700 - total flux cleaned = 0.00141501 Jy ! Component: 1750 - total flux cleaned = 0.00147087 Jy ! Component: 1800 - total flux cleaned = 0.0014847 Jy ! Component: 1850 - total flux cleaned = 0.00158009 Jy ! Component: 1900 - total flux cleaned = 0.00166106 Jy ! Component: 1950 - total flux cleaned = 0.00167427 Jy ! Component: 2000 - total flux cleaned = 0.00172727 Jy ! Component: 2050 - total flux cleaned = 0.00181936 Jy ! Component: 2100 - total flux cleaned = 0.00181929 Jy ! Component: 2150 - total flux cleaned = 0.00188362 Jy ! Component: 2200 - total flux cleaned = 0.00192186 Jy ! Component: 2250 - total flux cleaned = 0.00190915 Jy ! Component: 2300 - total flux cleaned = 0.00192168 Jy ! Component: 2350 - total flux cleaned = 0.00195898 Jy ! Component: 2400 - total flux cleaned = 0.00194662 Jy ! Component: 2450 - total flux cleaned = 0.00193445 Jy ! Component: 2500 - total flux cleaned = 0.00189785 Jy ! Component: 2550 - total flux cleaned = 0.001898 Jy ! Component: 2600 - total flux cleaned = 0.00188608 Jy ! Component: 2650 - total flux cleaned = 0.00190988 Jy ! Component: 2700 - total flux cleaned = 0.00183901 Jy ! Component: 2750 - total flux cleaned = 0.00188588 Jy ! Component: 2800 - total flux cleaned = 0.00187429 Jy ! Component: 2850 - total flux cleaned = 0.00185125 Jy ! Component: 2900 - total flux cleaned = 0.00181683 Jy ! Component: 2950 - total flux cleaned = 0.00182835 Jy ! Component: 3000 - total flux cleaned = 0.00183956 Jy ! Component: 3050 - total flux cleaned = 0.00182837 Jy ! Component: 3100 - total flux cleaned = 0.00185058 Jy ! Component: 3150 - total flux cleaned = 0.00182845 Jy ! Component: 3200 - total flux cleaned = 0.00183943 Jy ! Component: 3250 - total flux cleaned = 0.0017847 Jy ! Component: 3300 - total flux cleaned = 0.00180636 Jy ! Component: 3350 - total flux cleaned = 0.00178484 Jy ! Component: 3400 - total flux cleaned = 0.00179568 Jy ! Component: 3450 - total flux cleaned = 0.00177428 Jy ! Component: 3500 - total flux cleaned = 0.0017637 Jy ! Component: 3550 - total flux cleaned = 0.00170048 Jy ! Component: 3600 - total flux cleaned = 0.00168991 Jy ! Component: 3650 - total flux cleaned = 0.00167939 Jy ! Component: 3700 - total flux cleaned = 0.00161724 Jy ! Component: 3750 - total flux cleaned = 0.00159665 Jy ! Component: 3800 - total flux cleaned = 0.00156597 Jy ! Component: 3850 - total flux cleaned = 0.00153543 Jy ! Component: 3900 - total flux cleaned = 0.00148477 Jy ! Component: 3950 - total flux cleaned = 0.00148476 Jy ! Component: 4000 - total flux cleaned = 0.00144466 Jy ! Component: 4050 - total flux cleaned = 0.00141473 Jy ! Total flux subtracted in 4096 components = 0.001375 Jy ! Clean residual min=-0.000577 max=0.000593 Jy/beam ! Clean residual mean=0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.167134 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 439 components and 0.167134 Jy ![Exited script file: muppet] wmap "J0626-1512_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.033 at 0.9411 degrees (North through East) ! Clean map min=-0.0012743 max=0.13421 Jy/beam ! Writing clean map to FITS file: J0626-1512_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134207 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.410791 0.410791 0.821582 1.64316 3.28633 6.57265 13.1453 26.2906 52.5812 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.049 x 8.033 at 0.9411 degrees (North through East) ! Clean map min=-0.0012743 max=0.13421 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0626-1512_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:08:34 2017