! Started logfile: J0621+7605_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:42 2017 obs J0621+7605_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0621+7605_S_2014_01_04_pus_uva.fits ! AN table 1: 62 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0621+7605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0621+7605_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 124 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988989Jy sigma=0.012304 ! Fit after self-cal, rms=0.885262Jy sigma=0.010747 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=12.38 mas, bpa=42.77 degrees ! Estimated noise=1739.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867555 Jy ! Component: 100 - total flux cleaned = 0.117178 Jy ! Total flux subtracted in 100 components = 0.117178 Jy ! Clean residual min=-0.010724 max=0.014965 Jy/beam ! Clean residual mean=-0.000016 rms=0.003545 Jy/beam ! Combined flux in latest and established models = 0.117178 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.117178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097799Jy sigma=0.001004 ! Fit after self-cal, rms=0.097308Jy sigma=0.001001 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=13.12 mas, bpa=42.44 degrees ! Estimated noise=854.288 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275408 Jy ! Component: 100 - total flux cleaned = 0.0398821 Jy ! Component: 150 - total flux cleaned = 0.0467644 Jy ! Component: 200 - total flux cleaned = 0.0516257 Jy ! Total flux subtracted in 200 components = 0.0516257 Jy ! Clean residual min=-0.005080 max=0.004919 Jy/beam ! Clean residual mean=-0.000042 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.168803 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 46 components and 0.168803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090332Jy sigma=0.000893 ! Fit after self-cal, rms=0.090030Jy sigma=0.000892 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 1.00 ! MK 1.01 NL 0.99 OV 0.95 PT 0.98 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* KP 1.00* LA 0.99 ! MK 1.05 NL 1.02 OV 1.00 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* KP 1.00* LA 0.79 ! MK 1.00 NL 0.96 OV 0.91 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.87 ! MK 1.01 NL 1.09 OV 0.99 PT 1.00 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.090030Jy sigma=0.000892 ! Fit after self-cal, rms=0.084884Jy sigma=0.000875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=13.03 mas, bpa=42.26 degrees ! Estimated noise=835.433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559639 Jy ! Component: 100 - total flux cleaned = 0.00022051 Jy ! Component: 150 - total flux cleaned = 5.12559e-05 Jy ! Component: 200 - total flux cleaned = -3.89329e-05 Jy ! Total flux subtracted in 200 components = -3.89329e-05 Jy ! Clean residual min=-0.002921 max=0.002284 Jy/beam ! Clean residual mean=-0.000005 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.168764 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.168764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084747Jy sigma=0.000874 ! Fit after self-cal, rms=0.084611Jy sigma=0.000874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084611Jy sigma=0.000874 ! Fit after self-cal, rms=0.084019Jy sigma=0.000874 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=13.01 mas, bpa=42.2 degrees ! Estimated noise=833.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.33576e-05 Jy ! Component: 100 - total flux cleaned = -0.000174918 Jy ! Component: 150 - total flux cleaned = -0.000140925 Jy ! Component: 200 - total flux cleaned = -7.98116e-05 Jy ! Total flux subtracted in 200 components = -7.98116e-05 Jy ! Clean residual min=-0.002605 max=0.002316 Jy/beam ! Clean residual mean=-0.000004 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.168685 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.168685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083968Jy sigma=0.000873 ! Fit after self-cal, rms=0.083977Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123002 Jy ! Component: 100 - total flux cleaned = 0.000184695 Jy ! Component: 150 - total flux cleaned = 0.000291596 Jy ! Component: 200 - total flux cleaned = 0.000387308 Jy ! Total flux subtracted in 200 components = 0.000387308 Jy ! Clean residual min=-0.002449 max=0.002337 Jy/beam ! Clean residual mean=-0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.169072 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 0.169072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083950Jy sigma=0.000873 ! Fit after self-cal, rms=0.083976Jy sigma=0.000873 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083976Jy sigma=0.000873 ! Fit after self-cal, rms=0.083613Jy sigma=0.000873 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=12.99 mas, bpa=42.13 degrees ! Estimated noise=833.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.02368e-05 Jy ! Component: 100 - total flux cleaned = -2.41781e-05 Jy ! Component: 150 - total flux cleaned = 4.46666e-05 Jy ! Component: 200 - total flux cleaned = 0.0001272 Jy ! Total flux subtracted in 200 components = 0.0001272 Jy ! Clean residual min=-0.002338 max=0.002359 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.169199 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 96 components and 0.169199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083591Jy sigma=0.000873 ! Fit after self-cal, rms=0.083609Jy sigma=0.000873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.53196e-05 Jy ! Component: 100 - total flux cleaned = 0.000138746 Jy ! Component: 150 - total flux cleaned = 0.000176206 Jy ! Component: 200 - total flux cleaned = 0.00022786 Jy ! Total flux subtracted in 200 components = 0.00022786 Jy ! Clean residual min=-0.002263 max=0.002349 Jy/beam ! Clean residual mean=-0.000002 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.169427 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 103 components and 0.169427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083597Jy sigma=0.000873 ! Fit after self-cal, rms=0.083617Jy sigma=0.000873 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083617Jy sigma=0.000873 ! Fit after self-cal, rms=0.083334Jy sigma=0.000873 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.298 mas, bmaj=16.3 mas, bpa=41.44 degrees ! Estimated noise=961.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411959 Jy ! Component: 100 - total flux cleaned = 0.000460674 Jy ! Component: 150 - total flux cleaned = 0.000487068 Jy ! Component: 200 - total flux cleaned = 0.000476774 Jy ! Total flux subtracted in 200 components = 0.000476774 Jy ! Clean residual min=-0.002242 max=0.002452 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.169904 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 112 components and 0.169904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083334Jy sigma=0.000872 ! Fit after self-cal, rms=0.083323Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.97553e-06 Jy ! Component: 100 - total flux cleaned = -5.32335e-06 Jy ! Component: 150 - total flux cleaned = -1.50456e-05 Jy ! Component: 200 - total flux cleaned = -3.40246e-05 Jy ! Total flux subtracted in 200 components = -3.40246e-05 Jy ! Clean residual min=-0.002228 max=0.002391 Jy/beam ! Clean residual mean=-0.000002 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.16987 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 123 components and 0.16987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083324Jy sigma=0.000872 ! Fit after self-cal, rms=0.083323Jy sigma=0.000872 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=12.98 mas, bpa=42.06 degrees ! Estimated noise=833.306 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.98 x 12.98 at 42.06 degrees (North through East) ! Clean map min=-0.0020818 max=0.12166 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.345 mas, bmaj=12.16 mas, bpa=42.49 degrees ! Estimated noise=1721.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0864481 Jy ! Component: 100 - total flux cleaned = 0.119532 Jy ! Component: 150 - total flux cleaned = 0.137131 Jy ! Component: 200 - total flux cleaned = 0.147341 Jy ! Total flux subtracted in 200 components = 0.147341 Jy ! Clean residual min=-0.007506 max=0.007315 Jy/beam ! Clean residual mean=-0.000002 rms=0.001912 Jy/beam ! Combined flux in latest and established models = 0.147341 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.147341 Jy ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=12.98 mas, bpa=42.06 degrees ! Estimated noise=833.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979492 Jy ! Component: 100 - total flux cleaned = 0.0144457 Jy ! Component: 150 - total flux cleaned = 0.0169598 Jy ! Component: 200 - total flux cleaned = 0.0180187 Jy ! Total flux subtracted in 200 components = 0.0180187 Jy ! Clean residual min=-0.003234 max=0.002168 Jy/beam ! Clean residual mean=-0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.165359 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 54 components and 0.165359 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.298 mas, bmaj=16.3 mas, bpa=41.44 degrees ! Estimated noise=961.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181942 Jy ! Component: 100 - total flux cleaned = 0.00273381 Jy ! Component: 150 - total flux cleaned = 0.00337513 Jy ! Component: 200 - total flux cleaned = 0.00364501 Jy ! Total flux subtracted in 200 components = 0.00364501 Jy ! Clean residual min=-0.002471 max=0.002102 Jy/beam ! Clean residual mean=-0.000006 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.169004 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.32573e-05 Jy ! Component: 100 - total flux cleaned = 0.000159076 Jy ! Component: 150 - total flux cleaned = 0.000209698 Jy ! Component: 200 - total flux cleaned = 0.000245533 Jy ! Total flux subtracted in 200 components = 0.000245533 Jy ! Clean residual min=-0.002376 max=0.002180 Jy/beam ! Clean residual mean=-0.000005 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.16925 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 89 components and 0.16925 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=12.98 mas, bpa=42.06 degrees ! Estimated noise=833.306 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138272 Jy ! Component: 100 - total flux cleaned = 2.20612e-05 Jy ! Component: 150 - total flux cleaned = 0.000250903 Jy ! Component: 200 - total flux cleaned = 0.000369935 Jy ! Total flux subtracted in 200 components = 0.000369935 Jy ! Clean residual min=-0.002377 max=0.002329 Jy/beam ! Clean residual mean=-0.000001 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.16962 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 98 components and 0.16962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083348Jy sigma=0.000873 ! Fit after self-cal, rms=0.083260Jy sigma=0.000873 wmodel J0621+7605_S_2014_01_04_pus_map.mod ! Writing 98 model components to file: J0621+7605_S_2014_01_04_pus_map.mod wobs J0621+7605_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0621+7605_S_2014_01_04_pus_uvs.fits wwins J0621+7605_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0621+7605_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.47539e-05 Jy ! Component: 100 - total flux cleaned = 0.000368361 Jy ! Component: 150 - total flux cleaned = 0.00053474 Jy ! Component: 200 - total flux cleaned = 0.000718021 Jy ! Component: 250 - total flux cleaned = 0.000889655 Jy ! Component: 300 - total flux cleaned = 0.00105265 Jy ! Component: 350 - total flux cleaned = 0.00118162 Jy ! Component: 400 - total flux cleaned = 0.00120627 Jy ! Component: 450 - total flux cleaned = 0.00120674 Jy ! Component: 500 - total flux cleaned = 0.00132251 Jy ! Component: 550 - total flux cleaned = 0.00145742 Jy ! Component: 600 - total flux cleaned = 0.00156655 Jy ! Component: 650 - total flux cleaned = 0.00163069 Jy ! Component: 700 - total flux cleaned = 0.00175512 Jy ! Component: 750 - total flux cleaned = 0.00185604 Jy ! Component: 800 - total flux cleaned = 0.00193483 Jy ! Component: 850 - total flux cleaned = 0.00201259 Jy ! Component: 900 - total flux cleaned = 0.00216386 Jy ! Component: 950 - total flux cleaned = 0.00221908 Jy ! Component: 1000 - total flux cleaned = 0.0023094 Jy ! Component: 1050 - total flux cleaned = 0.00230896 Jy ! Component: 1100 - total flux cleaned = 0.00234339 Jy ! Component: 1150 - total flux cleaned = 0.00242823 Jy ! Component: 1200 - total flux cleaned = 0.00247799 Jy ! Component: 1250 - total flux cleaned = 0.00255977 Jy ! Component: 1300 - total flux cleaned = 0.00262433 Jy ! Component: 1350 - total flux cleaned = 0.00267204 Jy ! Component: 1400 - total flux cleaned = 0.00275034 Jy ! Component: 1450 - total flux cleaned = 0.00282708 Jy ! Component: 1500 - total flux cleaned = 0.00287231 Jy ! Component: 1550 - total flux cleaned = 0.00297642 Jy ! Component: 1600 - total flux cleaned = 0.00300569 Jy ! Component: 1650 - total flux cleaned = 0.00302015 Jy ! Component: 1700 - total flux cleaned = 0.00309159 Jy ! Component: 1750 - total flux cleaned = 0.0031758 Jy ! Component: 1800 - total flux cleaned = 0.0031757 Jy ! Component: 1850 - total flux cleaned = 0.00321714 Jy ! Component: 1900 - total flux cleaned = 0.00325793 Jy ! Component: 1950 - total flux cleaned = 0.00331152 Jy ! Component: 2000 - total flux cleaned = 0.0033644 Jy ! Component: 2050 - total flux cleaned = 0.00340363 Jy ! Component: 2100 - total flux cleaned = 0.00346816 Jy ! Component: 2150 - total flux cleaned = 0.00349361 Jy ! Component: 2200 - total flux cleaned = 0.00355699 Jy ! Component: 2250 - total flux cleaned = 0.00364479 Jy ! Component: 2300 - total flux cleaned = 0.00370698 Jy ! Component: 2350 - total flux cleaned = 0.00375611 Jy ! Component: 2400 - total flux cleaned = 0.00378061 Jy ! Component: 2450 - total flux cleaned = 0.00381717 Jy ! Component: 2500 - total flux cleaned = 0.00385341 Jy ! Component: 2550 - total flux cleaned = 0.00385349 Jy ! Component: 2600 - total flux cleaned = 0.00390111 Jy ! Component: 2650 - total flux cleaned = 0.00390104 Jy ! Component: 2700 - total flux cleaned = 0.00386574 Jy ! Component: 2750 - total flux cleaned = 0.00388917 Jy ! Component: 2800 - total flux cleaned = 0.00384255 Jy ! Component: 2850 - total flux cleaned = 0.00381943 Jy ! Component: 2900 - total flux cleaned = 0.00379631 Jy ! Component: 2950 - total flux cleaned = 0.00379631 Jy ! Component: 3000 - total flux cleaned = 0.00376207 Jy ! Component: 3050 - total flux cleaned = 0.00373933 Jy ! Component: 3100 - total flux cleaned = 0.00370551 Jy ! Component: 3150 - total flux cleaned = 0.00367178 Jy ! Component: 3200 - total flux cleaned = 0.0036718 Jy ! Component: 3250 - total flux cleaned = 0.00361598 Jy ! Component: 3300 - total flux cleaned = 0.00360487 Jy ! Component: 3350 - total flux cleaned = 0.00356046 Jy ! Component: 3400 - total flux cleaned = 0.00353836 Jy ! Component: 3450 - total flux cleaned = 0.00350524 Jy ! Component: 3500 - total flux cleaned = 0.00343918 Jy ! Component: 3550 - total flux cleaned = 0.00340615 Jy ! Component: 3600 - total flux cleaned = 0.00337321 Jy ! Component: 3650 - total flux cleaned = 0.00337325 Jy ! Component: 3700 - total flux cleaned = 0.0033623 Jy ! Component: 3750 - total flux cleaned = 0.00336229 Jy ! Component: 3800 - total flux cleaned = 0.0033404 Jy ! Component: 3850 - total flux cleaned = 0.00336225 Jy ! Component: 3900 - total flux cleaned = 0.00334034 Jy ! Component: 3950 - total flux cleaned = 0.00336219 Jy ! Component: 4000 - total flux cleaned = 0.0033622 Jy ! Component: 4050 - total flux cleaned = 0.00336223 Jy ! Total flux subtracted in 4096 components = 0.00336227 Jy ! Clean residual min=-0.000604 max=0.000590 Jy/beam ! Clean residual mean=0.000001 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.172982 Jy keep ! Adding 204 model components to the UV plane model. ! The established model now contains 302 components and 0.172982 Jy ![Exited script file: muppet] wmap "J0621+7605_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.98 x 12.98 at 42.06 degrees (North through East) ! Clean map min=-0.0012364 max=0.12134 Jy/beam ! Writing clean map to FITS file: J0621+7605_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121338 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00019216 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.475102 0.475102 0.950204 1.90041 3.80082 7.60163 15.2033 30.4065 60.813 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.98 x 12.98 at 42.06 degrees (North through East) ! Clean map min=-0.0012364 max=0.12134 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0621+7605_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:18:47 2017