! Started logfile: J0618-1418_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:11 2017 obs J0618-1418_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0618-1418_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698255 visibilities/baseline/integration-bin. ! Found source: J0618-1418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 15208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0618-1418_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 253 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 253 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964244Jy sigma=0.009940 ! Fit after self-cal, rms=0.935363Jy sigma=0.009668 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=7.219 mas, bpa=1.039 degrees ! Estimated noise=1034.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506844 Jy ! Component: 100 - total flux cleaned = 0.0626446 Jy ! Total flux subtracted in 100 components = 0.0626446 Jy ! Clean residual min=-0.003679 max=0.005070 Jy/beam ! Clean residual mean=-0.000010 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.0626446 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0626446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088595Jy sigma=0.000782 ! Fit after self-cal, rms=0.088408Jy sigma=0.000781 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=7.97 mas, bpa=1.15 degrees ! Estimated noise=583.757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770838 Jy ! Component: 100 - total flux cleaned = 0.0113935 Jy ! Component: 150 - total flux cleaned = 0.0132895 Jy ! Component: 200 - total flux cleaned = 0.0143387 Jy ! Total flux subtracted in 200 components = 0.0143387 Jy ! Clean residual min=-0.003150 max=0.004372 Jy/beam ! Clean residual mean=0.000002 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.0769833 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 32 components and 0.0769833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087722Jy sigma=0.000774 ! Fit after self-cal, rms=0.087686Jy sigma=0.000773 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 1.02 ! LA 1.33 MK 1.08 NL 1.01 OV 0.95 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 1.03 KP 0.97 ! LA 1.18 MK 1.08 NL 1.09 OV 1.02 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.04 KP 0.85 ! LA 0.93 MK 1.06 NL 1.11 OV 0.88 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.96 KP 0.82 ! LA 1.08 MK 1.08 NL 1.04 OV 0.93 ! PT 1.00 SC 0.98 ! ! ! Fit before self-cal, rms=0.087686Jy sigma=0.000773 ! Fit after self-cal, rms=0.086972Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.039 mas, bpa=1.763 degrees ! Estimated noise=584.411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000218343 Jy ! Component: 100 - total flux cleaned = 0.000214241 Jy ! Component: 150 - total flux cleaned = 0.000212546 Jy ! Component: 200 - total flux cleaned = 0.000247095 Jy ! Total flux subtracted in 200 components = 0.000247095 Jy ! Clean residual min=-0.003038 max=0.003432 Jy/beam ! Clean residual mean=-0.000004 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.0772304 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.0772304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086952Jy sigma=0.000768 ! Fit after self-cal, rms=0.087067Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087067Jy sigma=0.000768 ! Fit after self-cal, rms=0.088652Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=8.086 mas, bpa=1.879 degrees ! Estimated noise=585.798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101794 Jy ! Component: 100 - total flux cleaned = 0.000160599 Jy ! Component: 150 - total flux cleaned = 0.000214312 Jy ! Component: 200 - total flux cleaned = 0.000263885 Jy ! Total flux subtracted in 200 components = 0.000263885 Jy ! Clean residual min=-0.002171 max=0.002875 Jy/beam ! Clean residual mean=0.000007 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0774943 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.0774943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088641Jy sigma=0.000763 ! Fit after self-cal, rms=0.088748Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279075 Jy ! Component: 100 - total flux cleaned = 0.0038024 Jy ! Component: 150 - total flux cleaned = 0.0038698 Jy ! Component: 200 - total flux cleaned = 0.00395597 Jy ! Total flux subtracted in 200 components = 0.00395597 Jy ! Clean residual min=-0.001793 max=0.002137 Jy/beam ! Clean residual mean=0.000005 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.0814503 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 0.0814502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088665Jy sigma=0.000761 ! Fit after self-cal, rms=0.088665Jy sigma=0.000761 ! Inverting map ! Added new window around map position (123.5, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193038 Jy ! Component: 100 - total flux cleaned = 0.00308186 Jy ! Component: 150 - total flux cleaned = 0.00385502 Jy ! Component: 200 - total flux cleaned = 0.00413227 Jy ! Total flux subtracted in 200 components = 0.00413227 Jy ! Clean residual min=-0.001784 max=0.001483 Jy/beam ! Clean residual mean=0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0855825 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.0855825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088614Jy sigma=0.000761 ! Fit after self-cal, rms=0.088613Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088613Jy sigma=0.000761 ! Fit after self-cal, rms=0.089014Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.074 mas, bpa=1.677 degrees ! Estimated noise=583.642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113676 Jy ! Component: 100 - total flux cleaned = 0.00150413 Jy ! Component: 150 - total flux cleaned = 0.00166858 Jy ! Component: 200 - total flux cleaned = 0.00173133 Jy ! Total flux subtracted in 200 components = 0.00173133 Jy ! Clean residual min=-0.001613 max=0.001350 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0873138 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 122 components and 0.0873138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088992Jy sigma=0.000760 ! Fit after self-cal, rms=0.089000Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223474 Jy ! Component: 100 - total flux cleaned = 0.000325812 Jy ! Component: 150 - total flux cleaned = 0.00027074 Jy ! Component: 200 - total flux cleaned = 0.000219578 Jy ! Total flux subtracted in 200 components = 0.000219578 Jy ! Clean residual min=-0.001623 max=0.001376 Jy/beam ! Clean residual mean=0.000001 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0875334 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 134 components and 0.0875334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088989Jy sigma=0.000760 ! Fit after self-cal, rms=0.088994Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088994Jy sigma=0.000760 ! Fit after self-cal, rms=0.088996Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.918 mas, bmaj=13.72 mas, bpa=0.5604 degrees ! Estimated noise=763.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681503 Jy ! Component: 100 - total flux cleaned = 0.000630158 Jy ! Component: 150 - total flux cleaned = 0.000601412 Jy ! Component: 200 - total flux cleaned = 0.000589682 Jy ! Total flux subtracted in 200 components = 0.000589682 Jy ! Clean residual min=-0.001795 max=0.001621 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0881231 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.0881231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088990Jy sigma=0.000760 ! Fit after self-cal, rms=0.088987Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.59636e-05 Jy ! Component: 100 - total flux cleaned = 1.78264e-05 Jy ! Component: 150 - total flux cleaned = -1.64414e-05 Jy ! Component: 200 - total flux cleaned = -5.85662e-05 Jy ! Total flux subtracted in 200 components = -5.85662e-05 Jy ! Clean residual min=-0.001782 max=0.001616 Jy/beam ! Clean residual mean=0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0880645 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 166 components and 0.0880645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088984Jy sigma=0.000760 ! Fit after self-cal, rms=0.088984Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.072 mas, bpa=1.609 degrees ! Estimated noise=582.825 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 8.072 at 1.609 degrees (North through East) ! Clean map min=-0.001628 max=0.066725 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=7.295 mas, bpa=1.517 degrees ! Estimated noise=1036.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503923 Jy ! Component: 100 - total flux cleaned = 0.0626949 Jy ! Component: 150 - total flux cleaned = 0.0692759 Jy ! Component: 200 - total flux cleaned = 0.0735354 Jy ! Total flux subtracted in 200 components = 0.0735354 Jy ! Clean residual min=-0.002692 max=0.002676 Jy/beam ! Clean residual mean=-0.000004 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0735354 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0735354 Jy ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.072 mas, bpa=1.609 degrees ! Estimated noise=582.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402624 Jy ! Component: 100 - total flux cleaned = 0.00660209 Jy ! Component: 150 - total flux cleaned = 0.00849598 Jy ! Component: 200 - total flux cleaned = 0.0100052 Jy ! Total flux subtracted in 200 components = 0.0100052 Jy ! Clean residual min=-0.001880 max=0.001446 Jy/beam ! Clean residual mean=0.000000 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0835406 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 72 components and 0.0835406 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.918 mas, bmaj=13.72 mas, bpa=0.5604 degrees ! Estimated noise=763.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017229 Jy ! Component: 100 - total flux cleaned = 0.00239878 Jy ! Component: 150 - total flux cleaned = 0.00291397 Jy ! Component: 200 - total flux cleaned = 0.00334639 Jy ! Total flux subtracted in 200 components = 0.00334639 Jy ! Clean residual min=-0.001859 max=0.001568 Jy/beam ! Clean residual mean=0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.086887 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342933 Jy ! Component: 100 - total flux cleaned = 0.000588261 Jy ! Component: 150 - total flux cleaned = 0.000693212 Jy ! Component: 200 - total flux cleaned = 0.000771494 Jy ! Total flux subtracted in 200 components = 0.000771494 Jy ! Clean residual min=-0.001763 max=0.001598 Jy/beam ! Clean residual mean=0.000001 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0876585 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 132 components and 0.0876585 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.072 mas, bpa=1.609 degrees ! Estimated noise=582.825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262732 Jy ! Component: 100 - total flux cleaned = 0.000236756 Jy ! Component: 150 - total flux cleaned = 0.000281292 Jy ! Component: 200 - total flux cleaned = 0.000302362 Jy ! Total flux subtracted in 200 components = 0.000302362 Jy ! Clean residual min=-0.001666 max=0.001329 Jy/beam ! Clean residual mean=0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0879609 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 148 components and 0.0879609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088994Jy sigma=0.000760 ! Fit after self-cal, rms=0.089008Jy sigma=0.000760 wmodel J0618-1418_S_2015_01_23_pus_map.mod ! Writing 148 model components to file: J0618-1418_S_2015_01_23_pus_map.mod wobs J0618-1418_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0618-1418_S_2015_01_23_pus_uvs.fits wwins J0618-1418_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0618-1418_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722873 Jy ! Component: 100 - total flux cleaned = -0.00105503 Jy ! Component: 150 - total flux cleaned = -0.00103283 Jy ! Component: 200 - total flux cleaned = -0.000943782 Jy ! Component: 250 - total flux cleaned = -0.000836119 Jy ! Component: 300 - total flux cleaned = -0.000670404 Jy ! Component: 350 - total flux cleaned = -0.000509512 Jy ! Component: 400 - total flux cleaned = -0.000314547 Jy ! Component: 450 - total flux cleaned = -0.000276653 Jy ! Component: 500 - total flux cleaned = -0.000202007 Jy ! Component: 550 - total flux cleaned = -0.00020209 Jy ! Component: 600 - total flux cleaned = -0.000147956 Jy ! Component: 650 - total flux cleaned = -7.7519e-05 Jy ! Component: 700 - total flux cleaned = -8.45416e-06 Jy ! Component: 750 - total flux cleaned = 4.26137e-05 Jy ! Component: 800 - total flux cleaned = 0.00010944 Jy ! Component: 850 - total flux cleaned = 0.00020769 Jy ! Component: 900 - total flux cleaned = 0.000223634 Jy ! Component: 950 - total flux cleaned = 0.000255375 Jy ! Component: 1000 - total flux cleaned = 0.000286954 Jy ! Component: 1050 - total flux cleaned = 0.000302432 Jy ! Component: 1100 - total flux cleaned = 0.000333063 Jy ! Component: 1150 - total flux cleaned = 0.000317861 Jy ! Component: 1200 - total flux cleaned = 0.000362607 Jy ! Component: 1250 - total flux cleaned = 0.000406372 Jy ! Component: 1300 - total flux cleaned = 0.000420742 Jy ! Component: 1350 - total flux cleaned = 0.000420626 Jy ! Component: 1400 - total flux cleaned = 0.000392459 Jy ! Component: 1450 - total flux cleaned = 0.000434386 Jy ! Component: 1500 - total flux cleaned = 0.000420801 Jy ! Component: 1550 - total flux cleaned = 0.000488837 Jy ! Component: 1600 - total flux cleaned = 0.00046175 Jy ! Component: 1650 - total flux cleaned = 0.000461713 Jy ! Component: 1700 - total flux cleaned = 0.000474902 Jy ! Component: 1750 - total flux cleaned = 0.000474902 Jy ! Component: 1800 - total flux cleaned = 0.00046209 Jy ! Component: 1850 - total flux cleaned = 0.000474741 Jy ! Component: 1900 - total flux cleaned = 0.000474754 Jy ! Component: 1950 - total flux cleaned = 0.000462213 Jy ! Component: 2000 - total flux cleaned = 0.000486851 Jy ! Component: 2050 - total flux cleaned = 0.00048673 Jy ! Component: 2100 - total flux cleaned = 0.000450541 Jy ! Component: 2150 - total flux cleaned = 0.000474563 Jy ! Component: 2200 - total flux cleaned = 0.000462798 Jy ! Component: 2250 - total flux cleaned = 0.000462906 Jy ! Component: 2300 - total flux cleaned = 0.000428127 Jy ! Component: 2350 - total flux cleaned = 0.000462778 Jy ! Component: 2400 - total flux cleaned = 0.00041704 Jy ! Component: 2450 - total flux cleaned = 0.000440046 Jy ! Component: 2500 - total flux cleaned = 0.00043998 Jy ! Component: 2550 - total flux cleaned = 0.00045113 Jy ! Component: 2600 - total flux cleaned = 0.00047319 Jy ! Component: 2650 - total flux cleaned = 0.000429135 Jy ! Component: 2700 - total flux cleaned = 0.000429178 Jy ! Component: 2750 - total flux cleaned = 0.000450638 Jy ! Component: 2800 - total flux cleaned = 0.000429351 Jy ! Component: 2850 - total flux cleaned = 0.000461317 Jy ! Component: 2900 - total flux cleaned = 0.000450641 Jy ! Component: 2950 - total flux cleaned = 0.000450569 Jy ! Component: 3000 - total flux cleaned = 0.000512891 Jy ! Component: 3050 - total flux cleaned = 0.000502511 Jy ! Component: 3100 - total flux cleaned = 0.000502533 Jy ! Component: 3150 - total flux cleaned = 0.000543104 Jy ! Component: 3200 - total flux cleaned = 0.000502897 Jy ! Component: 3250 - total flux cleaned = 0.000563022 Jy ! Component: 3300 - total flux cleaned = 0.000572899 Jy ! Component: 3350 - total flux cleaned = 0.000622223 Jy ! Component: 3400 - total flux cleaned = 0.00065155 Jy ! Component: 3450 - total flux cleaned = 0.000661278 Jy ! Component: 3500 - total flux cleaned = 0.000699962 Jy ! Component: 3550 - total flux cleaned = 0.000699985 Jy ! Component: 3600 - total flux cleaned = 0.000766617 Jy ! Component: 3650 - total flux cleaned = 0.000766594 Jy ! Component: 3700 - total flux cleaned = 0.000766478 Jy ! Component: 3750 - total flux cleaned = 0.000775956 Jy ! Component: 3800 - total flux cleaned = 0.00077596 Jy ! Component: 3850 - total flux cleaned = 0.000785178 Jy ! Component: 3900 - total flux cleaned = 0.000794385 Jy ! Component: 3950 - total flux cleaned = 0.000794393 Jy ! Component: 4000 - total flux cleaned = 0.000794493 Jy ! Component: 4050 - total flux cleaned = 0.000821436 Jy ! Total flux subtracted in 4096 components = 0.000821411 Jy ! Clean residual min=-0.000739 max=0.000503 Jy/beam ! Clean residual mean=0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.0887823 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 442 components and 0.0887823 Jy ![Exited script file: muppet] wmap "J0618-1418_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 8.072 at 1.609 degrees (North through East) ! Clean map min=-0.0014068 max=0.067096 Jy/beam ! Writing clean map to FITS file: J0618-1418_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0670964 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159572 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.713476 0.713476 1.42695 2.8539 5.7078 11.4156 22.8312 45.6624 91.3249 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 8.072 at 1.609 degrees (North through East) ! Clean map min=-0.0014068 max=0.067096 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0618-1418_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:08:17 2017