! Started logfile: J0617-2200_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:08:06 2017 obs J0617-2200_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0617-2200_S_2015_01_23_pus_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.951351 visibilities/baseline/integration-bin. ! Found source: J0617-2200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 12672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0617-2200_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869848Jy sigma=0.008085 ! Fit after self-cal, rms=0.841624Jy sigma=0.007873 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.406 mas, bmaj=6.444 mas, bpa=-6.327 degrees ! Estimated noise=941.348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12918 Jy ! Component: 100 - total flux cleaned = 0.157361 Jy ! Total flux subtracted in 100 components = 0.157361 Jy ! Clean residual min=-0.007717 max=0.008160 Jy/beam ! Clean residual mean=-0.000018 rms=0.001751 Jy/beam ! Combined flux in latest and established models = 0.157361 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.157361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122673Jy sigma=0.000848 ! Fit after self-cal, rms=0.122608Jy sigma=0.000848 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=7.525 mas, bpa=-5.249 degrees ! Estimated noise=716.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127071 Jy ! Component: 100 - total flux cleaned = 0.0193576 Jy ! Component: 150 - total flux cleaned = 0.0232611 Jy ! Component: 200 - total flux cleaned = 0.0256018 Jy ! Total flux subtracted in 200 components = 0.0256018 Jy ! Clean residual min=-0.005882 max=0.008587 Jy/beam ! Clean residual mean=-0.000032 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.182963 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 38 components and 0.182963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121799Jy sigma=0.000830 ! Fit after self-cal, rms=0.121816Jy sigma=0.000829 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 2.46 HN 0.98 KP 1.06 ! LA 0.96 MK 1.01 NL 1.11 OV 0.95 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.56 HN 1.06 KP 0.98 ! LA 0.93 MK 0.99 NL 1.26 OV 0.99 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 2.76 HN 1.04 KP 0.85 ! LA 0.76 MK 1.04 NL 1.15 OV 0.91 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 2.67 HN 0.99 KP 0.77 ! LA 0.79 MK 1.00 NL 1.06 OV 0.97 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.121816Jy sigma=0.000829 ! Fit after self-cal, rms=0.179469Jy sigma=0.000783 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.909 mas, bmaj=7.547 mas, bpa=-4.999 degrees ! Estimated noise=717.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357624 Jy ! Component: 100 - total flux cleaned = 0.00389096 Jy ! Component: 150 - total flux cleaned = 0.00373251 Jy ! Component: 200 - total flux cleaned = 0.00359707 Jy ! Total flux subtracted in 200 components = 0.00359707 Jy ! Clean residual min=-0.002621 max=0.002533 Jy/beam ! Clean residual mean=-0.000004 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.18656 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.18656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179385Jy sigma=0.000781 ! Fit after self-cal, rms=0.179799Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179799Jy sigma=0.000780 ! Fit after self-cal, rms=0.182100Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.897 mas, bmaj=7.53 mas, bpa=-5.046 degrees ! Estimated noise=717.781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188363 Jy ! Component: 100 - total flux cleaned = 0.00215122 Jy ! Component: 150 - total flux cleaned = 0.00218607 Jy ! Component: 200 - total flux cleaned = 0.00221802 Jy ! Total flux subtracted in 200 components = 0.00221802 Jy ! Clean residual min=-0.002623 max=0.002254 Jy/beam ! Clean residual mean=-0.000003 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.188778 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.188778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182064Jy sigma=0.000778 ! Fit after self-cal, rms=0.182073Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373088 Jy ! Component: 100 - total flux cleaned = 0.000260303 Jy ! Component: 150 - total flux cleaned = 0.000181395 Jy ! Component: 200 - total flux cleaned = 0.000131746 Jy ! Total flux subtracted in 200 components = 0.000131746 Jy ! Clean residual min=-0.002587 max=0.002225 Jy/beam ! Clean residual mean=-0.000003 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.18891 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 87 components and 0.18891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182062Jy sigma=0.000778 ! Fit after self-cal, rms=0.182066Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182066Jy sigma=0.000778 ! Fit after self-cal, rms=0.173207Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.893 mas, bmaj=7.527 mas, bpa=-5.085 degrees ! Estimated noise=716.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010733 Jy ! Component: 100 - total flux cleaned = 0.00115972 Jy ! Component: 150 - total flux cleaned = 0.00113657 Jy ! Component: 200 - total flux cleaned = 0.00109257 Jy ! Total flux subtracted in 200 components = 0.00109257 Jy ! Clean residual min=-0.002628 max=0.002046 Jy/beam ! Clean residual mean=-0.000003 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.190002 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 97 components and 0.190002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173187Jy sigma=0.000777 ! Fit after self-cal, rms=0.173179Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174384 Jy ! Component: 100 - total flux cleaned = 0.000132053 Jy ! Component: 150 - total flux cleaned = 7.2968e-05 Jy ! Component: 200 - total flux cleaned = 1.76981e-05 Jy ! Total flux subtracted in 200 components = 1.76981e-05 Jy ! Clean residual min=-0.002628 max=0.002038 Jy/beam ! Clean residual mean=-0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.19002 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.19002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173169Jy sigma=0.000777 ! Fit after self-cal, rms=0.173174Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173174Jy sigma=0.000777 ! Fit after self-cal, rms=0.173286Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.269 mas, bmaj=16.43 mas, bpa=-1.551 degrees ! Estimated noise=967.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000423358 Jy ! Component: 100 - total flux cleaned = 0.000338408 Jy ! Component: 150 - total flux cleaned = 0.000251879 Jy ! Component: 200 - total flux cleaned = 0.000180973 Jy ! Total flux subtracted in 200 components = 0.000180973 Jy ! Clean residual min=-0.002834 max=0.002761 Jy/beam ! Clean residual mean=-0.000009 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.190201 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 112 components and 0.190201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173280Jy sigma=0.000777 ! Fit after self-cal, rms=0.173271Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.05287e-05 Jy ! Component: 100 - total flux cleaned = 1.96326e-05 Jy ! Component: 150 - total flux cleaned = -2.09926e-05 Jy ! Component: 200 - total flux cleaned = -5.94977e-05 Jy ! Total flux subtracted in 200 components = -5.94977e-05 Jy ! Clean residual min=-0.002852 max=0.002784 Jy/beam ! Clean residual mean=-0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.190141 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 117 components and 0.190141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173271Jy sigma=0.000777 ! Fit after self-cal, rms=0.173268Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.526 mas, bpa=-5.097 degrees ! Estimated noise=716.304 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.526 at -5.097 degrees (North through East) ! Clean map min=-0.0024711 max=0.16557 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=6.439 mas, bpa=-6.003 degrees ! Estimated noise=943.856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129341 Jy ! Component: 100 - total flux cleaned = 0.157639 Jy ! Component: 150 - total flux cleaned = 0.166892 Jy ! Component: 200 - total flux cleaned = 0.173262 Jy ! Total flux subtracted in 200 components = 0.173262 Jy ! Clean residual min=-0.003475 max=0.003568 Jy/beam ! Clean residual mean=-0.000004 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.173262 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.173262 Jy ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.526 mas, bpa=-5.097 degrees ! Estimated noise=716.304 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00687657 Jy ! Component: 100 - total flux cleaned = 0.0108759 Jy ! Component: 150 - total flux cleaned = 0.0133881 Jy ! Component: 200 - total flux cleaned = 0.0150533 Jy ! Total flux subtracted in 200 components = 0.0150533 Jy ! Clean residual min=-0.002770 max=0.002153 Jy/beam ! Clean residual mean=-0.000004 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.188315 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.188315 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.269 mas, bmaj=16.43 mas, bpa=-1.551 degrees ! Estimated noise=967.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011408 Jy ! Component: 100 - total flux cleaned = 0.0012864 Jy ! Component: 150 - total flux cleaned = 0.00142086 Jy ! Component: 200 - total flux cleaned = 0.00148478 Jy ! Total flux subtracted in 200 components = 0.00148478 Jy ! Clean residual min=-0.002865 max=0.002808 Jy/beam ! Clean residual mean=-0.000010 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.1898 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.45536e-07 Jy ! Component: 100 - total flux cleaned = 7.6664e-08 Jy ! Component: 150 - total flux cleaned = -3.15415e-07 Jy ! Component: 200 - total flux cleaned = -7.04822e-07 Jy ! Total flux subtracted in 200 components = -7.04822e-07 Jy ! Clean residual min=-0.002856 max=0.002857 Jy/beam ! Clean residual mean=-0.000010 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.189799 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 95 components and 0.189799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.526 mas, bpa=-5.097 degrees ! Estimated noise=716.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235447 Jy ! Component: 100 - total flux cleaned = -0.000234142 Jy ! Component: 150 - total flux cleaned = -0.000173207 Jy ! Component: 200 - total flux cleaned = -0.000155607 Jy ! Total flux subtracted in 200 components = -0.000155607 Jy ! Clean residual min=-0.002734 max=0.002049 Jy/beam ! Clean residual mean=-0.000004 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.189644 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 106 components and 0.189644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173266Jy sigma=0.000777 ! Fit after self-cal, rms=0.173271Jy sigma=0.000777 wmodel J0617-2200_S_2015_01_23_pus_map.mod ! Writing 106 model components to file: J0617-2200_S_2015_01_23_pus_map.mod wobs J0617-2200_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0617-2200_S_2015_01_23_pus_uvs.fits wwins J0617-2200_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0617-2200_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113545 Jy ! Component: 100 - total flux cleaned = -0.00170968 Jy ! Component: 150 - total flux cleaned = -0.00220446 Jy ! Component: 200 - total flux cleaned = -0.0026382 Jy ! Component: 250 - total flux cleaned = -0.00299082 Jy ! Component: 300 - total flux cleaned = -0.0032396 Jy ! Component: 350 - total flux cleaned = -0.00345059 Jy ! Component: 400 - total flux cleaned = -0.0035393 Jy ! Component: 450 - total flux cleaned = -0.00371381 Jy ! Component: 500 - total flux cleaned = -0.00377085 Jy ! Component: 550 - total flux cleaned = -0.00388316 Jy ! Component: 600 - total flux cleaned = -0.0039658 Jy ! Component: 650 - total flux cleaned = -0.00396619 Jy ! Component: 700 - total flux cleaned = -0.00410006 Jy ! Component: 750 - total flux cleaned = -0.00404766 Jy ! Component: 800 - total flux cleaned = -0.00420336 Jy ! Component: 850 - total flux cleaned = -0.0041777 Jy ! Component: 900 - total flux cleaned = -0.00417811 Jy ! Component: 950 - total flux cleaned = -0.00430233 Jy ! Component: 1000 - total flux cleaned = -0.00425299 Jy ! Component: 1050 - total flux cleaned = -0.00422904 Jy ! Component: 1100 - total flux cleaned = -0.00430099 Jy ! Component: 1150 - total flux cleaned = -0.00432421 Jy ! Component: 1200 - total flux cleaned = -0.00430083 Jy ! Component: 1250 - total flux cleaned = -0.00439271 Jy ! Component: 1300 - total flux cleaned = -0.00434743 Jy ! Component: 1350 - total flux cleaned = -0.00443726 Jy ! Component: 1400 - total flux cleaned = -0.00443706 Jy ! Component: 1450 - total flux cleaned = -0.00445891 Jy ! Component: 1500 - total flux cleaned = -0.0044369 Jy ! Component: 1550 - total flux cleaned = -0.00441582 Jy ! Component: 1600 - total flux cleaned = -0.00437358 Jy ! Component: 1650 - total flux cleaned = -0.00431045 Jy ! Component: 1700 - total flux cleaned = -0.00431057 Jy ! Component: 1750 - total flux cleaned = -0.00433122 Jy ! Component: 1800 - total flux cleaned = -0.0043312 Jy ! Component: 1850 - total flux cleaned = -0.00433092 Jy ! Component: 1900 - total flux cleaned = -0.00427052 Jy ! Component: 1950 - total flux cleaned = -0.00431021 Jy ! Component: 2000 - total flux cleaned = -0.00425051 Jy ! Component: 2050 - total flux cleaned = -0.00421147 Jy ! Component: 2100 - total flux cleaned = -0.00425003 Jy ! Component: 2150 - total flux cleaned = -0.0041149 Jy ! Component: 2200 - total flux cleaned = -0.00400011 Jy ! Component: 2250 - total flux cleaned = -0.00400005 Jy ! Component: 2300 - total flux cleaned = -0.00401895 Jy ! Component: 2350 - total flux cleaned = -0.0039074 Jy ! Component: 2400 - total flux cleaned = -0.00387047 Jy ! Component: 2450 - total flux cleaned = -0.00392565 Jy ! Component: 2500 - total flux cleaned = -0.00387117 Jy ! Component: 2550 - total flux cleaned = -0.00390704 Jy ! Component: 2600 - total flux cleaned = -0.00387109 Jy ! Component: 2650 - total flux cleaned = -0.00376438 Jy ! Component: 2700 - total flux cleaned = -0.00381747 Jy ! Component: 2750 - total flux cleaned = -0.00380004 Jy ! Component: 2800 - total flux cleaned = -0.00374804 Jy ! Component: 2850 - total flux cleaned = -0.00362761 Jy ! Component: 2900 - total flux cleaned = -0.00362763 Jy ! Component: 2950 - total flux cleaned = -0.00359396 Jy ! Component: 3000 - total flux cleaned = -0.00364454 Jy ! Component: 3050 - total flux cleaned = -0.0035775 Jy ! Component: 3100 - total flux cleaned = -0.00346117 Jy ! Component: 3150 - total flux cleaned = -0.00342836 Jy ! Component: 3200 - total flux cleaned = -0.00339563 Jy ! Component: 3250 - total flux cleaned = -0.0033629 Jy ! Component: 3300 - total flux cleaned = -0.00323338 Jy ! Component: 3350 - total flux cleaned = -0.00313679 Jy ! Component: 3400 - total flux cleaned = -0.00312097 Jy ! Component: 3450 - total flux cleaned = -0.00305746 Jy ! Component: 3500 - total flux cleaned = -0.00297858 Jy ! Component: 3550 - total flux cleaned = -0.00288441 Jy ! Component: 3600 - total flux cleaned = -0.00285323 Jy ! Component: 3650 - total flux cleaned = -0.00285325 Jy ! Component: 3700 - total flux cleaned = -0.00272995 Jy ! Component: 3750 - total flux cleaned = -0.00262294 Jy ! Component: 3800 - total flux cleaned = -0.00254687 Jy ! Component: 3850 - total flux cleaned = -0.00248658 Jy ! Component: 3900 - total flux cleaned = -0.00245651 Jy ! Component: 3950 - total flux cleaned = -0.00245647 Jy ! Component: 4000 - total flux cleaned = -0.00236732 Jy ! Component: 4050 - total flux cleaned = -0.00227874 Jy ! Total flux subtracted in 4096 components = -0.00223484 Jy ! Clean residual min=-0.001006 max=0.000934 Jy/beam ! Clean residual mean=-0.000002 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.187409 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 393 components and 0.187409 Jy ![Exited script file: muppet] wmap "J0617-2200_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.526 at -5.097 degrees (North through East) ! Clean map min=-0.0027427 max=0.1672 Jy/beam ! Writing clean map to FITS file: J0617-2200_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167205 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270689 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.485671 0.485671 0.971342 1.94268 3.88537 7.77074 15.5415 31.0829 62.1659 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.526 at -5.097 degrees (North through East) ! Clean map min=-0.0027427 max=0.1672 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0617-2200_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:08:11 2017