! Started logfile: J0617-1715_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:33 2017 obs J0617-1715_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0617-1715_S_2014_01_04_pus_uva.fits ! AN table 1: 118 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0617-1715 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9912 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0617-1715_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943174Jy sigma=0.012010 ! Fit after self-cal, rms=0.914421Jy sigma=0.011587 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=5.528 mas, bpa=0.3652 degrees ! Estimated noise=1113.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0673991 Jy ! Component: 100 - total flux cleaned = 0.0851711 Jy ! Total flux subtracted in 100 components = 0.0851711 Jy ! Clean residual min=-0.005467 max=0.007247 Jy/beam ! Clean residual mean=0.000020 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.0851711 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0851711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085012Jy sigma=0.000913 ! Fit after self-cal, rms=0.085062Jy sigma=0.000912 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=6.513 mas, bpa=-0.5995 degrees ! Estimated noise=596.348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920631 Jy ! Component: 100 - total flux cleaned = 0.0130945 Jy ! Component: 150 - total flux cleaned = 0.0149823 Jy ! Component: 200 - total flux cleaned = 0.0159643 Jy ! Total flux subtracted in 200 components = 0.0159643 Jy ! Clean residual min=-0.004217 max=0.004374 Jy/beam ! Clean residual mean=0.000013 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.101135 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.101135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083962Jy sigma=0.000904 ! Fit after self-cal, rms=0.084059Jy sigma=0.000904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.96 ! MK 1.01 NL 0.96 OV 0.95 PT 1.01 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.97 ! MK 1.02 NL 1.05 OV 0.97 PT 0.99 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* KP 1.00* LA 0.81 ! MK 0.93 NL 0.98 OV 1.00 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* KP 1.00* LA 0.85 ! MK 1.00 NL 1.09 OV 1.01 PT 1.01 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.084059Jy sigma=0.000904 ! Fit after self-cal, rms=0.081401Jy sigma=0.000896 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=6.552 mas, bpa=-0.6878 degrees ! Estimated noise=598.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407445 Jy ! Component: 100 - total flux cleaned = 0.000647404 Jy ! Component: 150 - total flux cleaned = 0.000802996 Jy ! Component: 200 - total flux cleaned = 0.000856288 Jy ! Total flux subtracted in 200 components = 0.000856288 Jy ! Clean residual min=-0.003699 max=0.003372 Jy/beam ! Clean residual mean=0.000004 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.101992 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.101992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081357Jy sigma=0.000896 ! Fit after self-cal, rms=0.080888Jy sigma=0.000895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080888Jy sigma=0.000895 ! Fit after self-cal, rms=0.080436Jy sigma=0.000890 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=6.525 mas, bpa=-0.8712 degrees ! Estimated noise=596.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000296351 Jy ! Component: 100 - total flux cleaned = 0.000430542 Jy ! Component: 150 - total flux cleaned = 0.000486997 Jy ! Component: 200 - total flux cleaned = 0.000537827 Jy ! Total flux subtracted in 200 components = 0.000537827 Jy ! Clean residual min=-0.002975 max=0.002533 Jy/beam ! Clean residual mean=0.000007 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.10253 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.10253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080420Jy sigma=0.000889 ! Fit after self-cal, rms=0.080407Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.59349e-06 Jy ! Component: 100 - total flux cleaned = 7.59741e-05 Jy ! Component: 150 - total flux cleaned = 0.000131419 Jy ! Component: 200 - total flux cleaned = 0.00014351 Jy ! Total flux subtracted in 200 components = 0.00014351 Jy ! Clean residual min=-0.003010 max=0.002506 Jy/beam ! Clean residual mean=0.000007 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.102673 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.102673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080398Jy sigma=0.000889 ! Fit after self-cal, rms=0.080405Jy sigma=0.000889 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080405Jy sigma=0.000889 ! Fit after self-cal, rms=0.080251Jy sigma=0.000889 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.176 mas, bmaj=6.518 mas, bpa=-0.8437 degrees ! Estimated noise=596.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348582 Jy ! Component: 100 - total flux cleaned = 0.000436025 Jy ! Component: 150 - total flux cleaned = 0.000479377 Jy ! Component: 200 - total flux cleaned = 0.000518953 Jy ! Total flux subtracted in 200 components = 0.000518953 Jy ! Clean residual min=-0.002984 max=0.002510 Jy/beam ! Clean residual mean=0.000007 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.103192 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.103192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080240Jy sigma=0.000889 ! Fit after self-cal, rms=0.080240Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.15629e-05 Jy ! Component: 100 - total flux cleaned = 4.48369e-05 Jy ! Component: 150 - total flux cleaned = 6.78255e-05 Jy ! Component: 200 - total flux cleaned = 7.85099e-05 Jy ! Total flux subtracted in 200 components = 7.85099e-05 Jy ! Clean residual min=-0.002977 max=0.002507 Jy/beam ! Clean residual mean=0.000007 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.10327 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.10327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080234Jy sigma=0.000889 ! Fit after self-cal, rms=0.080238Jy sigma=0.000889 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080238Jy sigma=0.000889 ! Fit after self-cal, rms=0.080073Jy sigma=0.000889 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=14.31 mas, bpa=5.179 degrees ! Estimated noise=733.475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575074 Jy ! Component: 100 - total flux cleaned = 0.00059126 Jy ! Component: 150 - total flux cleaned = 0.000620498 Jy ! Component: 200 - total flux cleaned = 0.000646672 Jy ! Total flux subtracted in 200 components = 0.000646672 Jy ! Clean residual min=-0.003540 max=0.003242 Jy/beam ! Clean residual mean=0.000014 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.103917 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.103917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080076Jy sigma=0.000889 ! Fit after self-cal, rms=0.080067Jy sigma=0.000889 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.57067e-05 Jy ! Component: 100 - total flux cleaned = -8.66788e-06 Jy ! Component: 150 - total flux cleaned = 4.6553e-06 Jy ! Component: 200 - total flux cleaned = 2.84091e-05 Jy ! Total flux subtracted in 200 components = 2.84091e-05 Jy ! Clean residual min=-0.003526 max=0.003241 Jy/beam ! Clean residual mean=0.000014 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.103946 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.103946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080073Jy sigma=0.000889 ! Fit after self-cal, rms=0.080066Jy sigma=0.000889 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=6.509 mas, bpa=-0.8163 degrees ! Estimated noise=596.322 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 6.509 at -0.8163 degrees (North through East) ! Clean map min=-0.0028424 max=0.086841 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=5.536 mas, bpa=-0.04134 degrees ! Estimated noise=1108.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670842 Jy ! Component: 100 - total flux cleaned = 0.0861372 Jy ! Component: 150 - total flux cleaned = 0.0946023 Jy ! Component: 200 - total flux cleaned = 0.0991236 Jy ! Total flux subtracted in 200 components = 0.0991236 Jy ! Clean residual min=-0.004278 max=0.004411 Jy/beam ! Clean residual mean=0.000006 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.0991236 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0991236 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=6.509 mas, bpa=-0.8163 degrees ! Estimated noise=596.322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278559 Jy ! Component: 100 - total flux cleaned = 0.00368365 Jy ! Component: 150 - total flux cleaned = 0.00388776 Jy ! Component: 200 - total flux cleaned = 0.00395691 Jy ! Total flux subtracted in 200 components = 0.00395691 Jy ! Clean residual min=-0.003171 max=0.002549 Jy/beam ! Clean residual mean=0.000007 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.10308 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.10308 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=14.31 mas, bpa=5.179 degrees ! Estimated noise=733.475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661588 Jy ! Component: 100 - total flux cleaned = 0.000665211 Jy ! Component: 150 - total flux cleaned = 0.000681841 Jy ! Component: 200 - total flux cleaned = 0.000693614 Jy ! Total flux subtracted in 200 components = 0.000693614 Jy ! Clean residual min=-0.003493 max=0.003280 Jy/beam ! Clean residual mean=0.000014 rms=0.000909 Jy/beam ! Combined flux in latest and established models = 0.103774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.32333e-05 Jy ! Component: 100 - total flux cleaned = 6.46438e-05 Jy ! Component: 150 - total flux cleaned = 9.44789e-05 Jy ! Component: 200 - total flux cleaned = 0.000122916 Jy ! Total flux subtracted in 200 components = 0.000122916 Jy ! Clean residual min=-0.003486 max=0.003263 Jy/beam ! Clean residual mean=0.000014 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.103897 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.103897 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=6.509 mas, bpa=-0.8163 degrees ! Estimated noise=596.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.27854e-05 Jy ! Component: 100 - total flux cleaned = -0.000237702 Jy ! Component: 150 - total flux cleaned = -0.00036348 Jy ! Component: 200 - total flux cleaned = -0.000390283 Jy ! Total flux subtracted in 200 components = -0.000390283 Jy ! Clean residual min=-0.003101 max=0.002458 Jy/beam ! Clean residual mean=0.000007 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.103507 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.103507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080087Jy sigma=0.000889 ! Fit after self-cal, rms=0.080087Jy sigma=0.000889 wmodel J0617-1715_S_2014_01_04_pus_map.mod ! Writing 39 model components to file: J0617-1715_S_2014_01_04_pus_map.mod wobs J0617-1715_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0617-1715_S_2014_01_04_pus_uvs.fits wwins J0617-1715_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0617-1715_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000881752 Jy ! Component: 100 - total flux cleaned = -0.000962626 Jy ! Component: 150 - total flux cleaned = -0.00110983 Jy ! Component: 200 - total flux cleaned = -0.00135558 Jy ! Component: 250 - total flux cleaned = -0.00165551 Jy ! Component: 300 - total flux cleaned = -0.0017522 Jy ! Component: 350 - total flux cleaned = -0.0018149 Jy ! Component: 400 - total flux cleaned = -0.00193239 Jy ! Component: 450 - total flux cleaned = -0.0019028 Jy ! Component: 500 - total flux cleaned = -0.00187539 Jy ! Component: 550 - total flux cleaned = -0.00187538 Jy ! Component: 600 - total flux cleaned = -0.00187477 Jy ! Component: 650 - total flux cleaned = -0.00184917 Jy ! Component: 700 - total flux cleaned = -0.00175094 Jy ! Component: 750 - total flux cleaned = -0.00172759 Jy ! Component: 800 - total flux cleaned = -0.00172785 Jy ! Component: 850 - total flux cleaned = -0.00170568 Jy ! Component: 900 - total flux cleaned = -0.00172773 Jy ! Component: 950 - total flux cleaned = -0.00170624 Jy ! Component: 1000 - total flux cleaned = -0.00170605 Jy ! Component: 1050 - total flux cleaned = -0.0016854 Jy ! Component: 1100 - total flux cleaned = -0.00170614 Jy ! Component: 1150 - total flux cleaned = -0.00180583 Jy ! Component: 1200 - total flux cleaned = -0.00188326 Jy ! Component: 1250 - total flux cleaned = -0.00192115 Jy ! Component: 1300 - total flux cleaned = -0.00199551 Jy ! Component: 1350 - total flux cleaned = -0.0020684 Jy ! Component: 1400 - total flux cleaned = -0.0021218 Jy ! Component: 1450 - total flux cleaned = -0.00213924 Jy ! Component: 1500 - total flux cleaned = -0.00210451 Jy ! Component: 1550 - total flux cleaned = -0.00212218 Jy ! Component: 1600 - total flux cleaned = -0.00220682 Jy ! Component: 1650 - total flux cleaned = -0.00219004 Jy ! Component: 1700 - total flux cleaned = -0.00219013 Jy ! Component: 1750 - total flux cleaned = -0.00220639 Jy ! Component: 1800 - total flux cleaned = -0.00215886 Jy ! Component: 1850 - total flux cleaned = -0.00217494 Jy ! Component: 1900 - total flux cleaned = -0.00211313 Jy ! Component: 1950 - total flux cleaned = -0.00214379 Jy ! Component: 2000 - total flux cleaned = -0.00211389 Jy ! Component: 2050 - total flux cleaned = -0.00212857 Jy ! Component: 2100 - total flux cleaned = -0.00211371 Jy ! Component: 2150 - total flux cleaned = -0.00208471 Jy ! Component: 2200 - total flux cleaned = -0.0020846 Jy ! Component: 2250 - total flux cleaned = -0.0020985 Jy ! Component: 2300 - total flux cleaned = -0.002029 Jy ! Component: 2350 - total flux cleaned = -0.00202905 Jy ! Component: 2400 - total flux cleaned = -0.00198845 Jy ! Component: 2450 - total flux cleaned = -0.00198813 Jy ! Component: 2500 - total flux cleaned = -0.00194846 Jy ! Component: 2550 - total flux cleaned = -0.00193551 Jy ! Component: 2600 - total flux cleaned = -0.00189682 Jy ! Component: 2650 - total flux cleaned = -0.00187118 Jy ! Component: 2700 - total flux cleaned = -0.00180802 Jy ! Component: 2750 - total flux cleaned = -0.00178301 Jy ! Component: 2800 - total flux cleaned = -0.00173335 Jy ! Component: 2850 - total flux cleaned = -0.00169651 Jy ! Component: 2900 - total flux cleaned = -0.00162341 Jy ! Component: 2950 - total flux cleaned = -0.00156295 Jy ! Component: 3000 - total flux cleaned = -0.00149116 Jy ! Component: 3050 - total flux cleaned = -0.00147939 Jy ! Component: 3100 - total flux cleaned = -0.00143226 Jy ! Component: 3150 - total flux cleaned = -0.00142056 Jy ! Component: 3200 - total flux cleaned = -0.00137416 Jy ! Component: 3250 - total flux cleaned = -0.00131663 Jy ! Component: 3300 - total flux cleaned = -0.00129388 Jy ! Component: 3350 - total flux cleaned = -0.00123719 Jy ! Component: 3400 - total flux cleaned = -0.00123725 Jy ! Component: 3450 - total flux cleaned = -0.00120364 Jy ! Component: 3500 - total flux cleaned = -0.00115928 Jy ! Component: 3550 - total flux cleaned = -0.0011263 Jy ! Component: 3600 - total flux cleaned = -0.00109344 Jy ! Component: 3650 - total flux cleaned = -0.00110435 Jy ! Component: 3700 - total flux cleaned = -0.00106104 Jy ! Component: 3750 - total flux cleaned = -0.00103953 Jy ! Component: 3800 - total flux cleaned = -0.00105022 Jy ! Component: 3850 - total flux cleaned = -0.0010182 Jy ! Component: 3900 - total flux cleaned = -0.00101815 Jy ! Component: 3950 - total flux cleaned = -0.00100759 Jy ! Component: 4000 - total flux cleaned = -0.000965708 Jy ! Component: 4050 - total flux cleaned = -0.000976169 Jy ! Total flux subtracted in 4096 components = -0.000986566 Jy ! Clean residual min=-0.000709 max=0.000747 Jy/beam ! Clean residual mean=0.000004 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.10252 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 289 components and 0.10252 Jy ![Exited script file: muppet] wmap "J0617-1715_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 6.509 at -0.8163 degrees (North through East) ! Clean map min=-0.0013004 max=0.086757 Jy/beam ! Writing clean map to FITS file: J0617-1715_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0867575 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000164086 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.567396 0.567396 1.13479 2.26958 4.53917 9.07833 18.1567 36.3133 72.6267 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 6.509 at -0.8163 degrees (North through East) ! Clean map min=-0.0013004 max=0.086757 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0617-1715_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:18:37 2017