! Started logfile: J0616-3456_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:56:53 2016 obs J0616-3456_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0616-3456_S_2014_08_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.613115 visibilities/baseline/integration-bin. ! Found source: J0616-3456 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 13464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0616-3456_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 252 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 310 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929866Jy sigma=0.007306 ! Fit after self-cal, rms=0.882942Jy sigma=0.006941 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.822 mas, bmaj=16.52 mas, bpa=14.72 degrees ! Estimated noise=1462.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0847005 Jy ! Component: 100 - total flux cleaned = 0.114369 Jy ! Total flux subtracted in 100 components = 0.114369 Jy ! Clean residual min=-0.016990 max=0.018337 Jy/beam ! Clean residual mean=-0.000163 rms=0.005719 Jy/beam ! Combined flux in latest and established models = 0.114369 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.114369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161722Jy sigma=0.001299 ! Fit after self-cal, rms=0.161626Jy sigma=0.001298 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=19.46 mas, bpa=13.36 degrees ! Estimated noise=820.841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033756 Jy ! Component: 100 - total flux cleaned = 0.0520613 Jy ! Component: 150 - total flux cleaned = 0.0629629 Jy ! Component: 200 - total flux cleaned = 0.069695 Jy ! Total flux subtracted in 200 components = 0.069695 Jy ! Clean residual min=-0.028645 max=0.038907 Jy/beam ! Clean residual mean=-0.000612 rms=0.011741 Jy/beam ! Combined flux in latest and established models = 0.184064 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 111 components and 0.184064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155296Jy sigma=0.001236 ! Fit after self-cal, rms=0.155179Jy sigma=0.001234 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.48 FD 2.48 HN 1.15 KP 1.01 ! LA 0.78 MK 1.00* NL 1.37 OV 1.55 ! PT 0.65 SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 2.78 HN 1.00* KP 0.94 ! LA 0.77 MK 1.00* NL 1.51 OV 1.57 ! PT 0.65 SC 1.26 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 2.57 HN 1.00* KP 0.83 ! LA 0.60 MK 1.00* NL 1.39 OV 1.38 ! PT 0.66 SC 1.21 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.57 HN 1.00* KP 0.85 ! LA 0.57 MK 1.00* NL 1.40 OV 1.21 ! PT 0.76 SC 1.19 ! ! ! Fit before self-cal, rms=0.155179Jy sigma=0.001234 ! Fit after self-cal, rms=0.260293Jy sigma=0.001116 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.12 mas, bmaj=21.01 mas, bpa=13.51 degrees ! Estimated noise=912.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00242714 Jy ! Component: 100 - total flux cleaned = 0.00149191 Jy ! Component: 150 - total flux cleaned = 0.000653151 Jy ! Component: 200 - total flux cleaned = -0.000104076 Jy ! Total flux subtracted in 200 components = -0.000104076 Jy ! Clean residual min=-0.023335 max=0.028113 Jy/beam ! Clean residual mean=-0.000261 rms=0.009390 Jy/beam ! Combined flux in latest and established models = 0.18396 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 0.18396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258730Jy sigma=0.001117 ! Fit after self-cal, rms=0.267599Jy sigma=0.001101 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267599Jy sigma=0.001101 ! Fit after self-cal, rms=0.332326Jy sigma=0.001093 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.295 mas, bmaj=21.67 mas, bpa=13.35 degrees ! Estimated noise=996.744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445943 Jy ! Component: 100 - total flux cleaned = 0.00338521 Jy ! Component: 150 - total flux cleaned = 0.00218664 Jy ! Component: 200 - total flux cleaned = 0.00130871 Jy ! Total flux subtracted in 200 components = 0.00130871 Jy ! Clean residual min=-0.023990 max=0.029913 Jy/beam ! Clean residual mean=-0.000183 rms=0.009326 Jy/beam ! Combined flux in latest and established models = 0.185269 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 140 components and 0.185269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330756Jy sigma=0.001092 ! Fit after self-cal, rms=0.332742Jy sigma=0.001092 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213511 Jy ! Component: 100 - total flux cleaned = -0.0026902 Jy ! Component: 150 - total flux cleaned = -0.00338454 Jy ! Component: 200 - total flux cleaned = -0.00403153 Jy ! Total flux subtracted in 200 components = -0.00403153 Jy ! Clean residual min=-0.023882 max=0.029173 Jy/beam ! Clean residual mean=-0.000189 rms=0.009270 Jy/beam ! Combined flux in latest and established models = 0.181237 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 144 components and 0.181237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.332112Jy sigma=0.001092 ! Fit after self-cal, rms=0.331976Jy sigma=0.001092 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331976Jy sigma=0.001092 ! Fit after self-cal, rms=0.393329Jy sigma=0.001047 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.541 mas, bmaj=22.81 mas, bpa=13.11 degrees ! Estimated noise=1047.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708101 Jy ! Component: 100 - total flux cleaned = -0.000820809 Jy ! Component: 150 - total flux cleaned = -0.00189626 Jy ! Component: 200 - total flux cleaned = -0.00308561 Jy ! Total flux subtracted in 200 components = -0.00308561 Jy ! Clean residual min=-0.026215 max=0.027250 Jy/beam ! Clean residual mean=-0.000228 rms=0.008967 Jy/beam ! Combined flux in latest and established models = 0.178152 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 147 components and 0.178152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391702Jy sigma=0.001048 ! Fit after self-cal, rms=0.391621Jy sigma=0.001046 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0022472 Jy ! Component: 100 - total flux cleaned = -0.00313543 Jy ! Component: 150 - total flux cleaned = -0.00392465 Jy ! Component: 200 - total flux cleaned = -0.00464558 Jy ! Total flux subtracted in 200 components = -0.00464558 Jy ! Clean residual min=-0.027158 max=0.026336 Jy/beam ! Clean residual mean=-0.000284 rms=0.009250 Jy/beam ! Combined flux in latest and established models = 0.173506 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 149 components and 0.173506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.390745Jy sigma=0.001047 ! Fit after self-cal, rms=0.390505Jy sigma=0.001047 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.390505Jy sigma=0.001047 ! Fit after self-cal, rms=0.436828Jy sigma=0.001045 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.29 mas, bmaj=39.1 mas, bpa=-2.208 degrees ! Estimated noise=1053.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00429994 Jy ! Component: 100 - total flux cleaned = -0.00506135 Jy ! Component: 150 - total flux cleaned = -0.0057348 Jy ! Component: 200 - total flux cleaned = -0.00614649 Jy ! Total flux subtracted in 200 components = -0.00614649 Jy ! Clean residual min=-0.034877 max=0.031839 Jy/beam ! Clean residual mean=-0.000396 rms=0.012120 Jy/beam ! Combined flux in latest and established models = 0.16736 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 150 components and 0.16736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.435535Jy sigma=0.001046 ! Fit after self-cal, rms=0.436128Jy sigma=0.001046 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250302 Jy ! Component: 100 - total flux cleaned = -0.00293884 Jy ! Component: 150 - total flux cleaned = -0.00332959 Jy ! Component: 200 - total flux cleaned = -0.00332941 Jy ! Total flux subtracted in 200 components = -0.00332941 Jy ! Clean residual min=-0.035593 max=0.032299 Jy/beam ! Clean residual mean=-0.000439 rms=0.012268 Jy/beam ! Combined flux in latest and established models = 0.16403 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 150 components and 0.16403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.435306Jy sigma=0.001047 ! Fit after self-cal, rms=0.435361Jy sigma=0.001046 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.772 mas, bmaj=23.7 mas, bpa=12.77 degrees ! Estimated noise=1090.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.772 x 23.7 at 12.77 degrees (North through East) ! Clean map min=-0.04055 max=0.1794 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=18.95 mas, bpa=14.48 degrees ! Estimated noise=2379.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126484 Jy ! Component: 100 - total flux cleaned = 0.159964 Jy ! Component: 150 - total flux cleaned = 0.164827 Jy ! Component: 200 - total flux cleaned = 0.166691 Jy ! Total flux subtracted in 200 components = 0.166691 Jy ! Clean residual min=-0.029037 max=0.030396 Jy/beam ! Clean residual mean=-0.000117 rms=0.008448 Jy/beam ! Combined flux in latest and established models = 0.166691 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.166691 Jy ! Inverting map and beam ! Estimated beam: bmin=4.772 mas, bmaj=23.7 mas, bpa=12.77 degrees ! Estimated noise=1090.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138297 Jy ! Component: 100 - total flux cleaned = -0.000185602 Jy ! Component: 150 - total flux cleaned = -0.000891156 Jy ! Component: 200 - total flux cleaned = -0.00121163 Jy ! Total flux subtracted in 200 components = -0.00121163 Jy ! Clean residual min=-0.029384 max=0.027299 Jy/beam ! Clean residual mean=-0.000325 rms=0.009941 Jy/beam ! Combined flux in latest and established models = 0.165479 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 30 components and 0.165479 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.29 mas, bmaj=39.1 mas, bpa=-2.208 degrees ! Estimated noise=1053.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665629 Jy ! Component: 100 - total flux cleaned = 0.000457349 Jy ! Component: 150 - total flux cleaned = -4.22017e-06 Jy ! Component: 200 - total flux cleaned = -0.000408385 Jy ! Total flux subtracted in 200 components = -0.000408385 Jy ! Clean residual min=-0.035238 max=0.032449 Jy/beam ! Clean residual mean=-0.000438 rms=0.012324 Jy/beam ! Combined flux in latest and established models = 0.165071 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000361705 Jy ! Component: 100 - total flux cleaned = -0.000699335 Jy ! Component: 150 - total flux cleaned = -0.0010019 Jy ! Component: 200 - total flux cleaned = -0.00114404 Jy ! Total flux subtracted in 200 components = -0.00114404 Jy ! Clean residual min=-0.035356 max=0.032170 Jy/beam ! Clean residual mean=-0.000449 rms=0.012333 Jy/beam ! Combined flux in latest and established models = 0.163927 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.163927 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.772 mas, bmaj=23.7 mas, bpa=12.77 degrees ! Estimated noise=1090.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538723 Jy ! Component: 100 - total flux cleaned = -0.0011612 Jy ! Component: 150 - total flux cleaned = -0.00186766 Jy ! Component: 200 - total flux cleaned = -0.00218828 Jy ! Total flux subtracted in 200 components = -0.00218828 Jy ! Clean residual min=-0.029621 max=0.027126 Jy/beam ! Clean residual mean=-0.000355 rms=0.009868 Jy/beam ! Combined flux in latest and established models = 0.161739 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 47 components and 0.161739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.433423Jy sigma=0.001050 ! Fit after self-cal, rms=0.433622Jy sigma=0.001049 wmodel J0616-3456_S_2014_08_09_pus_map.mod ! Writing 47 model components to file: J0616-3456_S_2014_08_09_pus_map.mod wobs J0616-3456_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0616-3456_S_2014_08_09_pus_uvs.fits wwins J0616-3456_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0616-3456_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00348205 Jy ! Component: 100 - total flux cleaned = -0.00212041 Jy ! Component: 150 - total flux cleaned = -0.000383501 Jy ! Component: 200 - total flux cleaned = 0.000450806 Jy ! Component: 250 - total flux cleaned = 0.0016334 Jy ! Component: 300 - total flux cleaned = 0.00276525 Jy ! Component: 350 - total flux cleaned = 0.0034926 Jy ! Component: 400 - total flux cleaned = 0.00313624 Jy ! Component: 450 - total flux cleaned = 0.00313154 Jy ! Component: 500 - total flux cleaned = 0.0027977 Jy ! Component: 550 - total flux cleaned = 0.00279864 Jy ! Component: 600 - total flux cleaned = 0.00122756 Jy ! Component: 650 - total flux cleaned = 0.000913772 Jy ! Component: 700 - total flux cleaned = -0.00119091 Jy ! Component: 750 - total flux cleaned = -0.00206721 Jy ! Component: 800 - total flux cleaned = -0.00321165 Jy ! Component: 850 - total flux cleaned = -0.00490003 Jy ! Component: 900 - total flux cleaned = -0.00600377 Jy ! Component: 950 - total flux cleaned = -0.007358 Jy ! Component: 1000 - total flux cleaned = -0.00895275 Jy ! Component: 1050 - total flux cleaned = -0.0105133 Jy ! Component: 1100 - total flux cleaned = -0.0122935 Jy ! Component: 1150 - total flux cleaned = -0.0132923 Jy ! Component: 1200 - total flux cleaned = -0.0147697 Jy ! Component: 1250 - total flux cleaned = -0.0164592 Jy ! Component: 1300 - total flux cleaned = -0.0176466 Jy ! Component: 1350 - total flux cleaned = -0.0197448 Jy ! Component: 1400 - total flux cleaned = -0.0213449 Jy ! Component: 1450 - total flux cleaned = -0.0222504 Jy ! Component: 1500 - total flux cleaned = -0.0244742 Jy ! Component: 1550 - total flux cleaned = -0.0255669 Jy ! Component: 1600 - total flux cleaned = -0.0268602 Jy ! Component: 1650 - total flux cleaned = -0.0272873 Jy ! Component: 1700 - total flux cleaned = -0.0285495 Jy ! Component: 1750 - total flux cleaned = -0.0291738 Jy ! Component: 1800 - total flux cleaned = -0.0295855 Jy ! Component: 1850 - total flux cleaned = -0.0303971 Jy ! Component: 1900 - total flux cleaned = -0.031397 Jy ! Component: 1950 - total flux cleaned = -0.0313953 Jy ! Component: 2000 - total flux cleaned = -0.0321788 Jy ! Component: 2050 - total flux cleaned = -0.0323731 Jy ! Component: 2100 - total flux cleaned = -0.0327536 Jy ! Component: 2150 - total flux cleaned = -0.0335073 Jy ! Component: 2200 - total flux cleaned = -0.0335038 Jy ! Component: 2250 - total flux cleaned = -0.033872 Jy ! Component: 2300 - total flux cleaned = -0.0340543 Jy ! Component: 2350 - total flux cleaned = -0.0349576 Jy ! Component: 2400 - total flux cleaned = -0.0345988 Jy ! Component: 2450 - total flux cleaned = -0.0351327 Jy ! Component: 2500 - total flux cleaned = -0.0358349 Jy ! Component: 2550 - total flux cleaned = -0.0361833 Jy ! Component: 2600 - total flux cleaned = -0.0366995 Jy ! Component: 2650 - total flux cleaned = -0.037211 Jy ! Component: 2700 - total flux cleaned = -0.0372115 Jy ! Component: 2750 - total flux cleaned = -0.0373797 Jy ! Component: 2800 - total flux cleaned = -0.0378757 Jy ! Component: 2850 - total flux cleaned = -0.0383651 Jy ! Component: 2900 - total flux cleaned = -0.0380404 Jy ! Component: 2950 - total flux cleaned = -0.0383612 Jy ! Component: 3000 - total flux cleaned = -0.0380434 Jy ! Component: 3050 - total flux cleaned = -0.0385168 Jy ! Component: 3100 - total flux cleaned = -0.0382033 Jy ! Component: 3150 - total flux cleaned = -0.0385102 Jy ! Component: 3200 - total flux cleaned = -0.0382021 Jy ! Component: 3250 - total flux cleaned = -0.0382029 Jy ! Component: 3300 - total flux cleaned = -0.0383543 Jy ! Component: 3350 - total flux cleaned = -0.0385027 Jy ! Component: 3400 - total flux cleaned = -0.038504 Jy ! Component: 3450 - total flux cleaned = -0.0387979 Jy ! Component: 3500 - total flux cleaned = -0.0390893 Jy ! Component: 3550 - total flux cleaned = -0.0389438 Jy ! Component: 3600 - total flux cleaned = -0.0392307 Jy ! Component: 3650 - total flux cleaned = -0.0392316 Jy ! Component: 3700 - total flux cleaned = -0.0393734 Jy ! Component: 3750 - total flux cleaned = -0.0397929 Jy ! Component: 3800 - total flux cleaned = -0.0402094 Jy ! Component: 3850 - total flux cleaned = -0.0402103 Jy ! Component: 3900 - total flux cleaned = -0.0404843 Jy ! Component: 3950 - total flux cleaned = -0.0407548 Jy ! Component: 4000 - total flux cleaned = -0.0410222 Jy ! Component: 4050 - total flux cleaned = -0.0411555 Jy ! Total flux subtracted in 4096 components = -0.0412886 Jy ! Clean residual min=-0.006933 max=0.007556 Jy/beam ! Clean residual mean=-0.000054 rms=0.003231 Jy/beam ! Combined flux in latest and established models = 0.12045 Jy keep ! Adding 487 model components to the UV plane model. ! The established model now contains 534 components and 0.12045 Jy ![Exited script file: muppet] wmap "J0616-3456_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.772 x 23.7 at 12.77 degrees (North through East) ! Clean map min=-0.036813 max=0.17882 Jy/beam ! Writing clean map to FITS file: J0616-3456_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.178816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00312593 device "J0616-3456_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0616-3456_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.2444 5.2444 10.4888 20.9776 41.9552 83.9104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0093 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.178 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.772 x 23.7 at 12.77 degrees (North through East) ! Clean map min=-0.036813 max=0.17882 Jy/beam quit ! Quitting program ! Log file J0616-3456_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:56:58 2016