! Started logfile: J0616-1041_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:28 2017 obs J0616-1041_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0616-1041_S_2014_01_04_pus_uva.fits ! AN table 1: 107 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0616-1041 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0616-1041_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 214 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.878854Jy sigma=0.013160 ! Fit after self-cal, rms=0.862997Jy sigma=0.012950 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.57 mas, bmaj=5.533 mas, bpa=0.03679 degrees ! Estimated noise=1046.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100151 Jy ! Component: 100 - total flux cleaned = 0.123908 Jy ! Total flux subtracted in 100 components = 0.123908 Jy ! Clean residual min=-0.009146 max=0.014975 Jy/beam ! Clean residual mean=0.000022 rms=0.002566 Jy/beam ! Combined flux in latest and established models = 0.123908 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.123908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087958Jy sigma=0.001039 ! Fit after self-cal, rms=0.087976Jy sigma=0.001038 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.245 mas, bmaj=6.478 mas, bpa=0.4326 degrees ! Estimated noise=562.525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176814 Jy ! Component: 100 - total flux cleaned = 0.0281964 Jy ! Component: 150 - total flux cleaned = 0.0353917 Jy ! Component: 200 - total flux cleaned = 0.0395659 Jy ! Total flux subtracted in 200 components = 0.0395659 Jy ! Clean residual min=-0.006340 max=0.010874 Jy/beam ! Clean residual mean=0.000015 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 0.163474 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.163474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083097Jy sigma=0.000987 ! Fit after self-cal, rms=0.082219Jy sigma=0.000983 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* KP 1.00* LA 0.98 ! MK 1.05 NL 0.96 OV 0.96 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 1.00* KP 1.00* LA 0.97 ! MK 1.10 NL 1.01 OV 0.99 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* KP 1.00* LA 0.79 ! MK 1.02 NL 0.95 OV 0.93 PT 0.90 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.86 ! MK 1.02 NL 1.02 OV 0.97 PT 0.94 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.082219Jy sigma=0.000983 ! Fit after self-cal, rms=0.078355Jy sigma=0.000932 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.268 mas, bmaj=6.639 mas, bpa=0.7707 degrees ! Estimated noise=568.006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00461236 Jy ! Component: 100 - total flux cleaned = -0.00557507 Jy ! Component: 150 - total flux cleaned = -0.00609142 Jy ! Component: 200 - total flux cleaned = -0.00653979 Jy ! Total flux subtracted in 200 components = -0.00653979 Jy ! Clean residual min=-0.003825 max=0.003898 Jy/beam ! Clean residual mean=-0.000001 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.156934 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 60 components and 0.156934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077966Jy sigma=0.000929 ! Fit after self-cal, rms=0.077474Jy sigma=0.000928 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077474Jy sigma=0.000928 ! Fit after self-cal, rms=0.074844Jy sigma=0.000914 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=6.609 mas, bpa=0.4012 degrees ! Estimated noise=566.011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00250795 Jy ! Component: 100 - total flux cleaned = -0.0032607 Jy ! Component: 150 - total flux cleaned = -0.00379378 Jy ! Component: 200 - total flux cleaned = -0.00411211 Jy ! Total flux subtracted in 200 components = -0.00411211 Jy ! Clean residual min=-0.002780 max=0.002820 Jy/beam ! Clean residual mean=-0.000002 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.152822 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 0.152822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074738Jy sigma=0.000913 ! Fit after self-cal, rms=0.074682Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677508 Jy ! Component: 100 - total flux cleaned = -0.000818432 Jy ! Component: 150 - total flux cleaned = -0.000937783 Jy ! Component: 200 - total flux cleaned = -0.000990042 Jy ! Total flux subtracted in 200 components = -0.000990042 Jy ! Clean residual min=-0.002686 max=0.002665 Jy/beam ! Clean residual mean=-0.000002 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.151832 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.151832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074646Jy sigma=0.000912 ! Fit after self-cal, rms=0.074654Jy sigma=0.000912 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074654Jy sigma=0.000912 ! Fit after self-cal, rms=0.074564Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.266 mas, bmaj=6.623 mas, bpa=0.3486 degrees ! Estimated noise=567.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012588 Jy ! Component: 100 - total flux cleaned = -0.0013901 Jy ! Component: 150 - total flux cleaned = -0.00155059 Jy ! Component: 200 - total flux cleaned = -0.00167073 Jy ! Total flux subtracted in 200 components = -0.00167073 Jy ! Clean residual min=-0.002463 max=0.002648 Jy/beam ! Clean residual mean=-0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.150161 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.150161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074530Jy sigma=0.000911 ! Fit after self-cal, rms=0.074495Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (107.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174752 Jy ! Component: 100 - total flux cleaned = 0.00184253 Jy ! Component: 150 - total flux cleaned = 0.00188282 Jy ! Component: 200 - total flux cleaned = 0.00184738 Jy ! Total flux subtracted in 200 components = 0.00184738 Jy ! Clean residual min=-0.002226 max=0.002122 Jy/beam ! Clean residual mean=-0.000002 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.152008 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.152008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074402Jy sigma=0.000910 ! Fit after self-cal, rms=0.074387Jy sigma=0.000910 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074387Jy sigma=0.000910 ! Fit after self-cal, rms=0.074239Jy sigma=0.000910 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=13.29 mas, bpa=7.211 degrees ! Estimated noise=674.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579274 Jy ! Component: 100 - total flux cleaned = 0.000764293 Jy ! Component: 150 - total flux cleaned = 0.000720107 Jy ! Component: 200 - total flux cleaned = 0.000722586 Jy ! Total flux subtracted in 200 components = 0.000722586 Jy ! Clean residual min=-0.001665 max=0.001808 Jy/beam ! Clean residual mean=-0.000004 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.152731 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 126 components and 0.152731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074216Jy sigma=0.000909 ! Fit after self-cal, rms=0.074180Jy sigma=0.000909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441278 Jy ! Component: 100 - total flux cleaned = 0.000526668 Jy ! Component: 150 - total flux cleaned = 0.000497719 Jy ! Component: 200 - total flux cleaned = 0.000471952 Jy ! Total flux subtracted in 200 components = 0.000471952 Jy ! Clean residual min=-0.001594 max=0.001709 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.153203 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.153203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074173Jy sigma=0.000909 ! Fit after self-cal, rms=0.074174Jy sigma=0.000909 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=6.63 mas, bpa=0.3009 degrees ! Estimated noise=567.868 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 6.63 at 0.3009 degrees (North through East) ! Clean map min=-0.0048417 max=0.12922 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.574 mas, bmaj=5.654 mas, bpa=-0.3577 degrees ! Estimated noise=1055.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101061 Jy ! Component: 100 - total flux cleaned = 0.125111 Jy ! Component: 150 - total flux cleaned = 0.136059 Jy ! Component: 200 - total flux cleaned = 0.1431 Jy ! Total flux subtracted in 200 components = 0.1431 Jy ! Clean residual min=-0.005809 max=0.004960 Jy/beam ! Clean residual mean=0.000000 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.1431 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.1431 Jy ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=6.63 mas, bpa=0.3009 degrees ! Estimated noise=567.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568207 Jy ! Component: 100 - total flux cleaned = 0.00840439 Jy ! Component: 150 - total flux cleaned = 0.00954884 Jy ! Component: 200 - total flux cleaned = 0.0103804 Jy ! Total flux subtracted in 200 components = 0.0103804 Jy ! Clean residual min=-0.002677 max=0.002449 Jy/beam ! Clean residual mean=-0.000002 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.15348 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.15348 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.706 mas, bmaj=13.29 mas, bpa=7.211 degrees ! Estimated noise=674.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338669 Jy ! Component: 100 - total flux cleaned = 0.000972651 Jy ! Component: 150 - total flux cleaned = 0.00120587 Jy ! Component: 200 - total flux cleaned = 0.00120795 Jy ! Total flux subtracted in 200 components = 0.00120795 Jy ! Clean residual min=-0.001797 max=0.002178 Jy/beam ! Clean residual mean=-0.000005 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.154688 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.37506e-05 Jy ! Component: 100 - total flux cleaned = -0.000141376 Jy ! Component: 150 - total flux cleaned = -0.000204137 Jy ! Component: 200 - total flux cleaned = -0.000289372 Jy ! Total flux subtracted in 200 components = -0.000289372 Jy ! Clean residual min=-0.001711 max=0.001963 Jy/beam ! Clean residual mean=-0.000005 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.154399 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.154399 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=6.63 mas, bpa=0.3009 degrees ! Estimated noise=567.868 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000314414 Jy ! Component: 100 - total flux cleaned = -0.000255327 Jy ! Component: 150 - total flux cleaned = -0.000450249 Jy ! Component: 200 - total flux cleaned = -0.000632847 Jy ! Total flux subtracted in 200 components = -0.000632847 Jy ! Clean residual min=-0.002127 max=0.002009 Jy/beam ! Clean residual mean=-0.000003 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.153766 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 0.153766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074199Jy sigma=0.000909 ! Fit after self-cal, rms=0.074190Jy sigma=0.000909 wmodel J0616-1041_S_2014_01_04_pus_map.mod ! Writing 93 model components to file: J0616-1041_S_2014_01_04_pus_map.mod wobs J0616-1041_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0616-1041_S_2014_01_04_pus_uvs.fits wwins J0616-1041_S_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J0616-1041_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050465 Jy ! Component: 100 - total flux cleaned = -0.000437793 Jy ! Component: 150 - total flux cleaned = -0.00043737 Jy ! Component: 200 - total flux cleaned = -0.000611759 Jy ! Component: 250 - total flux cleaned = -0.000808014 Jy ! Component: 300 - total flux cleaned = -0.00110575 Jy ! Component: 350 - total flux cleaned = -0.00134219 Jy ! Component: 400 - total flux cleaned = -0.00159726 Jy ! Component: 450 - total flux cleaned = -0.0018461 Jy ! Component: 500 - total flux cleaned = -0.00220739 Jy ! Component: 550 - total flux cleaned = -0.00241838 Jy ! Component: 600 - total flux cleaned = -0.00255613 Jy ! Component: 650 - total flux cleaned = -0.00282459 Jy ! Component: 700 - total flux cleaned = -0.00299934 Jy ! Component: 750 - total flux cleaned = -0.00317123 Jy ! Component: 800 - total flux cleaned = -0.00333912 Jy ! Component: 850 - total flux cleaned = -0.00348302 Jy ! Component: 900 - total flux cleaned = -0.00364442 Jy ! Component: 950 - total flux cleaned = -0.00376327 Jy ! Component: 1000 - total flux cleaned = -0.00382145 Jy ! Component: 1050 - total flux cleaned = -0.00387942 Jy ! Component: 1100 - total flux cleaned = -0.00397334 Jy ! Component: 1150 - total flux cleaned = -0.00406564 Jy ! Component: 1200 - total flux cleaned = -0.00410204 Jy ! Component: 1250 - total flux cleaned = -0.00419171 Jy ! Component: 1300 - total flux cleaned = -0.00427915 Jy ! Component: 1350 - total flux cleaned = -0.00433119 Jy ! Component: 1400 - total flux cleaned = -0.00438232 Jy ! Component: 1450 - total flux cleaned = -0.00444961 Jy ! Component: 1500 - total flux cleaned = -0.00454897 Jy ! Component: 1550 - total flux cleaned = -0.00463044 Jy ! Component: 1600 - total flux cleaned = -0.00466232 Jy ! Component: 1650 - total flux cleaned = -0.00469417 Jy ! Component: 1700 - total flux cleaned = -0.00477192 Jy ! Component: 1750 - total flux cleaned = -0.00480278 Jy ! Component: 1800 - total flux cleaned = -0.00484809 Jy ! Component: 1850 - total flux cleaned = -0.00489294 Jy ! Component: 1900 - total flux cleaned = -0.00490736 Jy ! Component: 1950 - total flux cleaned = -0.0048785 Jy ! Component: 2000 - total flux cleaned = -0.00489304 Jy ! Component: 2050 - total flux cleaned = -0.00492154 Jy ! Component: 2100 - total flux cleaned = -0.00493562 Jy ! Component: 2150 - total flux cleaned = -0.00494959 Jy ! Component: 2200 - total flux cleaned = -0.00494952 Jy ! Component: 2250 - total flux cleaned = -0.00497685 Jy ! Component: 2300 - total flux cleaned = -0.0049768 Jy ! Component: 2350 - total flux cleaned = -0.00495039 Jy ! Component: 2400 - total flux cleaned = -0.00497674 Jy ! Component: 2450 - total flux cleaned = -0.00497664 Jy ! Component: 2500 - total flux cleaned = -0.00498944 Jy ! Component: 2550 - total flux cleaned = -0.0049385 Jy ! Component: 2600 - total flux cleaned = -0.0049763 Jy ! Component: 2650 - total flux cleaned = -0.00498867 Jy ! Component: 2700 - total flux cleaned = -0.00496395 Jy ! Component: 2750 - total flux cleaned = -0.00497617 Jy ! Component: 2800 - total flux cleaned = -0.00498832 Jy ! Component: 2850 - total flux cleaned = -0.0050002 Jy ! Component: 2900 - total flux cleaned = -0.00497647 Jy ! Component: 2950 - total flux cleaned = -0.00497657 Jy ! Component: 3000 - total flux cleaned = -0.00499994 Jy ! Component: 3050 - total flux cleaned = -0.00499995 Jy ! Component: 3100 - total flux cleaned = -0.004977 Jy ! Component: 3150 - total flux cleaned = -0.00493145 Jy ! Component: 3200 - total flux cleaned = -0.00493141 Jy ! Component: 3250 - total flux cleaned = -0.00489774 Jy ! Component: 3300 - total flux cleaned = -0.00485314 Jy ! Component: 3350 - total flux cleaned = -0.00480897 Jy ! Component: 3400 - total flux cleaned = -0.00479804 Jy ! Component: 3450 - total flux cleaned = -0.00475461 Jy ! Component: 3500 - total flux cleaned = -0.00469009 Jy ! Component: 3550 - total flux cleaned = -0.0047115 Jy ! Component: 3600 - total flux cleaned = -0.00466895 Jy ! Component: 3650 - total flux cleaned = -0.00463715 Jy ! Component: 3700 - total flux cleaned = -0.00458475 Jy ! Component: 3750 - total flux cleaned = -0.00457436 Jy ! Component: 3800 - total flux cleaned = -0.00454317 Jy ! Component: 3850 - total flux cleaned = -0.00452257 Jy ! Component: 3900 - total flux cleaned = -0.00447163 Jy ! Component: 3950 - total flux cleaned = -0.00445135 Jy ! Component: 4000 - total flux cleaned = -0.00439099 Jy ! Component: 4050 - total flux cleaned = -0.00437096 Jy ! Total flux subtracted in 4096 components = -0.00434117 Jy ! Clean residual min=-0.000523 max=0.000833 Jy/beam ! Clean residual mean=-0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.149425 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 321 components and 0.149425 Jy ![Exited script file: muppet] wmap "J0616-1041_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 6.63 at 0.3009 degrees (North through East) ! Clean map min=-0.0030255 max=0.13206 Jy/beam ! Writing clean map to FITS file: J0616-1041_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132062 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00016869 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.383208 0.383208 0.766415 1.53283 3.06566 6.13132 12.2626 24.5253 49.0506 98.1012 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.264 x 6.63 at 0.3009 degrees (North through East) ! Clean map min=-0.0030255 max=0.13206 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0616-1041_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:18:33 2017