! Started logfile: J0615-3117_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:56:43 2016 obs J0615-3117_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0615-3117_S_2014_08_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780488 visibilities/baseline/integration-bin. ! Found source: J0615-3117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0615-3117_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.967015Jy sigma=0.007681 ! Fit after self-cal, rms=0.925620Jy sigma=0.007426 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=13.71 mas, bpa=11.61 degrees ! Estimated noise=1043.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0595568 Jy ! Component: 100 - total flux cleaned = 0.0728873 Jy ! Total flux subtracted in 100 components = 0.0728873 Jy ! Clean residual min=-0.003726 max=0.005567 Jy/beam ! Clean residual mean=0.000027 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.0728873 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0728873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105226Jy sigma=0.000777 ! Fit after self-cal, rms=0.105148Jy sigma=0.000777 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.88 mas, bmaj=16.16 mas, bpa=10.79 degrees ! Estimated noise=682.765 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00966892 Jy ! Component: 100 - total flux cleaned = 0.0145406 Jy ! Component: 150 - total flux cleaned = 0.017282 Jy ! Component: 200 - total flux cleaned = 0.0189063 Jy ! Total flux subtracted in 200 components = 0.0189063 Jy ! Clean residual min=-0.002940 max=0.006492 Jy/beam ! Clean residual mean=0.000008 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0917936 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 50 components and 0.0917936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104319Jy sigma=0.000770 ! Fit after self-cal, rms=0.104319Jy sigma=0.000769 ! Inverting map ! Added new window around map position (10.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00588711 Jy ! Component: 100 - total flux cleaned = 0.00885199 Jy ! Component: 150 - total flux cleaned = 0.0107381 Jy ! Component: 200 - total flux cleaned = 0.0115309 Jy ! Total flux subtracted in 200 components = 0.0115309 Jy ! Clean residual min=-0.002310 max=0.002879 Jy/beam ! Clean residual mean=0.000010 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.103324 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 85 components and 0.103324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104001Jy sigma=0.000766 ! Fit after self-cal, rms=0.103939Jy sigma=0.000766 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.90 HN 0.98 KP 1.07 ! LA 1.05 MK 1.00* NL 1.03 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.04 HN 1.04 KP 1.00 ! LA 1.12 MK 1.00* NL 1.00 OV 1.07 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.14 HN 1.01 KP 0.88 ! LA 0.87 MK 1.00* NL 1.04 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.04 HN 1.04 KP 0.86 ! LA 0.79 MK 1.00* NL 1.14 OV 1.05 ! PT 1.02 SC 0.95 ! ! ! Fit before self-cal, rms=0.103939Jy sigma=0.000766 ! Fit after self-cal, rms=0.103246Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=16.22 mas, bpa=10.98 degrees ! Estimated noise=683.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239902 Jy ! Component: 100 - total flux cleaned = 0.00335034 Jy ! Component: 150 - total flux cleaned = 0.00354253 Jy ! Component: 200 - total flux cleaned = 0.0035763 Jy ! Total flux subtracted in 200 components = 0.0035763 Jy ! Clean residual min=-0.001911 max=0.002363 Jy/beam ! Clean residual mean=0.000001 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.106901 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.106901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103188Jy sigma=0.000762 ! Fit after self-cal, rms=0.103156Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103156Jy sigma=0.000761 ! Fit after self-cal, rms=0.103184Jy sigma=0.000761 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=16.22 mas, bpa=11.01 degrees ! Estimated noise=682.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130823 Jy ! Component: 100 - total flux cleaned = 0.00149991 Jy ! Component: 150 - total flux cleaned = 0.00163683 Jy ! Component: 200 - total flux cleaned = 0.00159644 Jy ! Total flux subtracted in 200 components = 0.00159644 Jy ! Clean residual min=-0.001827 max=0.002184 Jy/beam ! Clean residual mean=0.000002 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.108497 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 122 components and 0.108497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103160Jy sigma=0.000761 ! Fit after self-cal, rms=0.103158Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 126). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156524 Jy ! Component: 100 - total flux cleaned = 0.00181566 Jy ! Component: 150 - total flux cleaned = 0.00194987 Jy ! Component: 200 - total flux cleaned = 0.00197861 Jy ! Total flux subtracted in 200 components = 0.00197861 Jy ! Clean residual min=-0.001707 max=0.001850 Jy/beam ! Clean residual mean=0.000001 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.110476 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 0.110476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103114Jy sigma=0.000761 ! Fit after self-cal, rms=0.103112Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103112Jy sigma=0.000761 ! Fit after self-cal, rms=0.103219Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=16.24 mas, bpa=10.96 degrees ! Estimated noise=681.734 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000911576 Jy ! Component: 100 - total flux cleaned = 0.00107905 Jy ! Component: 150 - total flux cleaned = 0.00103309 Jy ! Component: 200 - total flux cleaned = 0.00105381 Jy ! Total flux subtracted in 200 components = 0.00105381 Jy ! Clean residual min=-0.001696 max=0.001701 Jy/beam ! Clean residual mean=0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.11153 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 176 components and 0.11153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103202Jy sigma=0.000760 ! Fit after self-cal, rms=0.103241Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228178 Jy ! Component: 100 - total flux cleaned = 0.000251141 Jy ! Component: 150 - total flux cleaned = 0.000250533 Jy ! Component: 200 - total flux cleaned = 0.000231261 Jy ! Total flux subtracted in 200 components = 0.000231261 Jy ! Clean residual min=-0.001684 max=0.001713 Jy/beam ! Clean residual mean=0.000005 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.111761 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 186 components and 0.111761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103231Jy sigma=0.000760 ! Fit after self-cal, rms=0.103236Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103236Jy sigma=0.000760 ! Fit after self-cal, rms=0.103212Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.209 mas, bmaj=24.05 mas, bpa=1.334 degrees ! Estimated noise=779.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319246 Jy ! Component: 100 - total flux cleaned = 0.000334923 Jy ! Component: 150 - total flux cleaned = 0.000334992 Jy ! Component: 200 - total flux cleaned = 0.000305077 Jy ! Total flux subtracted in 200 components = 0.000305077 Jy ! Clean residual min=-0.001542 max=0.001717 Jy/beam ! Clean residual mean=0.000010 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.112066 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 203 components and 0.112066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103206Jy sigma=0.000760 ! Fit after self-cal, rms=0.103210Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121855 Jy ! Component: 100 - total flux cleaned = 0.000107626 Jy ! Component: 150 - total flux cleaned = 9.4199e-05 Jy ! Component: 200 - total flux cleaned = 8.22662e-05 Jy ! Total flux subtracted in 200 components = 8.22662e-05 Jy ! Clean residual min=-0.001533 max=0.001697 Jy/beam ! Clean residual mean=0.000009 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.112148 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 207 components and 0.112148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103206Jy sigma=0.000760 ! Fit after self-cal, rms=0.103209Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=16.24 mas, bpa=10.95 degrees ! Estimated noise=681.531 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 16.24 at 10.95 degrees (North through East) ! Clean map min=-0.0015803 max=0.077414 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=13.79 mas, bpa=11.77 degrees ! Estimated noise=1041.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0587376 Jy ! Component: 100 - total flux cleaned = 0.0727338 Jy ! Component: 150 - total flux cleaned = 0.0806475 Jy ! Component: 200 - total flux cleaned = 0.0863778 Jy ! Total flux subtracted in 200 components = 0.0863778 Jy ! Clean residual min=-0.003351 max=0.003531 Jy/beam ! Clean residual mean=0.000014 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.0863778 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0863778 Jy ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=16.24 mas, bpa=10.95 degrees ! Estimated noise=681.531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072864 Jy ! Component: 100 - total flux cleaned = 0.0121034 Jy ! Component: 150 - total flux cleaned = 0.0156145 Jy ! Component: 200 - total flux cleaned = 0.0182956 Jy ! Total flux subtracted in 200 components = 0.0182956 Jy ! Clean residual min=-0.001865 max=0.002157 Jy/beam ! Clean residual mean=0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.104673 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 81 components and 0.104673 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.209 mas, bmaj=24.05 mas, bpa=1.334 degrees ! Estimated noise=779.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268804 Jy ! Component: 100 - total flux cleaned = 0.00431126 Jy ! Component: 150 - total flux cleaned = 0.00509072 Jy ! Component: 200 - total flux cleaned = 0.00562971 Jy ! Total flux subtracted in 200 components = 0.00562971 Jy ! Clean residual min=-0.001541 max=0.001764 Jy/beam ! Clean residual mean=0.000007 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.110303 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286956 Jy ! Component: 100 - total flux cleaned = 0.00053107 Jy ! Component: 150 - total flux cleaned = 0.000694957 Jy ! Component: 200 - total flux cleaned = 0.000819205 Jy ! Total flux subtracted in 200 components = 0.000819205 Jy ! Clean residual min=-0.001492 max=0.001713 Jy/beam ! Clean residual mean=0.000008 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.111122 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 137 components and 0.111122 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=16.24 mas, bpa=10.95 degrees ! Estimated noise=681.531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.35276e-05 Jy ! Component: 100 - total flux cleaned = 0.000261567 Jy ! Component: 150 - total flux cleaned = 0.000350081 Jy ! Component: 200 - total flux cleaned = 0.000456892 Jy ! Total flux subtracted in 200 components = 0.000456892 Jy ! Clean residual min=-0.001574 max=0.001730 Jy/beam ! Clean residual mean=0.000004 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.111579 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 159 components and 0.111579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103227Jy sigma=0.000760 ! Fit after self-cal, rms=0.103214Jy sigma=0.000760 wmodel J0615-3117_S_2014_08_09_pus_map.mod ! Writing 159 model components to file: J0615-3117_S_2014_08_09_pus_map.mod wobs J0615-3117_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0615-3117_S_2014_08_09_pus_uvs.fits wwins J0615-3117_S_2014_08_09_pus_map.win ! wwins: Wrote 3 windows to J0615-3117_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.85521e-05 Jy ! Component: 100 - total flux cleaned = 0.000181185 Jy ! Component: 150 - total flux cleaned = 0.000316397 Jy ! Component: 200 - total flux cleaned = 0.000315556 Jy ! Component: 250 - total flux cleaned = 0.000240469 Jy ! Component: 300 - total flux cleaned = 0.00021541 Jy ! Component: 350 - total flux cleaned = 0.000144137 Jy ! Component: 400 - total flux cleaned = 0.000166822 Jy ! Component: 450 - total flux cleaned = 0.000166508 Jy ! Component: 500 - total flux cleaned = 0.000254519 Jy ! Component: 550 - total flux cleaned = 0.000276007 Jy ! Component: 600 - total flux cleaned = 0.000382231 Jy ! Component: 650 - total flux cleaned = 0.000465436 Jy ! Component: 700 - total flux cleaned = 0.000547164 Jy ! Component: 750 - total flux cleaned = 0.000587027 Jy ! Component: 800 - total flux cleaned = 0.00060679 Jy ! Component: 850 - total flux cleaned = 0.0006647 Jy ! Component: 900 - total flux cleaned = 0.000703012 Jy ! Component: 950 - total flux cleaned = 0.000759758 Jy ! Component: 1000 - total flux cleaned = 0.000834313 Jy ! Component: 1050 - total flux cleaned = 0.000870949 Jy ! Component: 1100 - total flux cleaned = 0.000943018 Jy ! Component: 1150 - total flux cleaned = 0.000996898 Jy ! Component: 1200 - total flux cleaned = 0.00108494 Jy ! Component: 1250 - total flux cleaned = 0.00120647 Jy ! Component: 1300 - total flux cleaned = 0.00124032 Jy ! Component: 1350 - total flux cleaned = 0.00130817 Jy ! Component: 1400 - total flux cleaned = 0.00139194 Jy ! Component: 1450 - total flux cleaned = 0.00149083 Jy ! Component: 1500 - total flux cleaned = 0.00152341 Jy ! Component: 1550 - total flux cleaned = 0.00163638 Jy ! Component: 1600 - total flux cleaned = 0.00174768 Jy ! Component: 1650 - total flux cleaned = 0.00181057 Jy ! Component: 1700 - total flux cleaned = 0.00190438 Jy ! Component: 1750 - total flux cleaned = 0.00196609 Jy ! Component: 1800 - total flux cleaned = 0.00201222 Jy ! Component: 1850 - total flux cleaned = 0.00208803 Jy ! Component: 1900 - total flux cleaned = 0.00217801 Jy ! Component: 1950 - total flux cleaned = 0.00222246 Jy ! Component: 2000 - total flux cleaned = 0.00231053 Jy ! Component: 2050 - total flux cleaned = 0.00235425 Jy ! Component: 2100 - total flux cleaned = 0.00236885 Jy ! Component: 2150 - total flux cleaned = 0.00248323 Jy ! Component: 2200 - total flux cleaned = 0.0024977 Jy ! Component: 2250 - total flux cleaned = 0.00255387 Jy ! Component: 2300 - total flux cleaned = 0.00260955 Jy ! Component: 2350 - total flux cleaned = 0.00266454 Jy ! Component: 2400 - total flux cleaned = 0.0026918 Jy ! Component: 2450 - total flux cleaned = 0.00269181 Jy ! Component: 2500 - total flux cleaned = 0.00275896 Jy ! Component: 2550 - total flux cleaned = 0.00271919 Jy ! Component: 2600 - total flux cleaned = 0.0027324 Jy ! Component: 2650 - total flux cleaned = 0.00275872 Jy ! Component: 2700 - total flux cleaned = 0.0028364 Jy ! Component: 2750 - total flux cleaned = 0.00282362 Jy ! Component: 2800 - total flux cleaned = 0.00286179 Jy ! Component: 2850 - total flux cleaned = 0.00284905 Jy ! Component: 2900 - total flux cleaned = 0.00288669 Jy ! Component: 2950 - total flux cleaned = 0.00289915 Jy ! Component: 3000 - total flux cleaned = 0.00288683 Jy ! Component: 3050 - total flux cleaned = 0.00286228 Jy ! Component: 3100 - total flux cleaned = 0.00294783 Jy ! Component: 3150 - total flux cleaned = 0.00292371 Jy ! Component: 3200 - total flux cleaned = 0.00298371 Jy ! Component: 3250 - total flux cleaned = 0.00300756 Jy ! Component: 3300 - total flux cleaned = 0.00303131 Jy ! Component: 3350 - total flux cleaned = 0.00305483 Jy ! Component: 3400 - total flux cleaned = 0.00307815 Jy ! Component: 3450 - total flux cleaned = 0.00311295 Jy ! Component: 3500 - total flux cleaned = 0.00314739 Jy ! Component: 3550 - total flux cleaned = 0.00315876 Jy ! Component: 3600 - total flux cleaned = 0.0031927 Jy ! Component: 3650 - total flux cleaned = 0.0031813 Jy ! Component: 3700 - total flux cleaned = 0.00323728 Jy ! Component: 3750 - total flux cleaned = 0.00327056 Jy ! Component: 3800 - total flux cleaned = 0.0032927 Jy ! Component: 3850 - total flux cleaned = 0.00332546 Jy ! Component: 3900 - total flux cleaned = 0.00333637 Jy ! Component: 3950 - total flux cleaned = 0.00339055 Jy ! Component: 4000 - total flux cleaned = 0.00340136 Jy ! Component: 4050 - total flux cleaned = 0.00341218 Jy ! Total flux subtracted in 4096 components = 0.00347595 Jy ! Clean residual min=-0.000733 max=0.000639 Jy/beam ! Clean residual mean=0.000002 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.115055 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 445 components and 0.115055 Jy ![Exited script file: muppet] wmap "J0615-3117_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 16.24 at 10.95 degrees (North through East) ! Clean map min=-0.0015592 max=0.076898 Jy/beam ! Writing clean map to FITS file: J0615-3117_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.076898 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209581 device "J0615-3117_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0615-3117_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.817632 0.817632 1.63526 3.27053 6.54106 13.0821 26.1642 52.3284 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.076 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 16.24 at 10.95 degrees (North through East) ! Clean map min=-0.0015592 max=0.076898 Jy/beam quit ! Quitting program ! Log file J0615-3117_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:56:48 2016