! Started logfile: J0611-1155_X_2014_01_04_pus_uvs.log on Fri Jan 13 17:22:33 2017 obs J0611-1155_X_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0611-1155_X_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.347816 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0611-1155 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 382 lines of history. ! ! Reading 17580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0611-1155_X_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 409 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966373Jy sigma=0.011665 ! Fit after self-cal, rms=0.932691Jy sigma=0.011299 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6165 mas, bmaj=1.498 mas, bpa=1.2 degrees ! Estimated noise=1342.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485528 Jy ! Component: 100 - total flux cleaned = 0.0633043 Jy ! Total flux subtracted in 100 components = 0.0633043 Jy ! Clean residual min=-0.006906 max=0.008517 Jy/beam ! Clean residual mean=0.000092 rms=0.002222 Jy/beam ! Combined flux in latest and established models = 0.0633043 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0633043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070318Jy sigma=0.000824 ! Fit after self-cal, rms=0.070236Jy sigma=0.000823 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7298 mas, bmaj=1.747 mas, bpa=0.1789 degrees ! Estimated noise=444.359 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179621 Jy ! Component: 100 - total flux cleaned = 0.0278117 Jy ! Component: 150 - total flux cleaned = 0.0333093 Jy ! Component: 200 - total flux cleaned = 0.036428 Jy ! Total flux subtracted in 200 components = 0.036428 Jy ! Clean residual min=-0.005615 max=0.009872 Jy/beam ! Clean residual mean=0.000169 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 0.0997323 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.0997323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066268Jy sigma=0.000757 ! Fit after self-cal, rms=0.066340Jy sigma=0.000755 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.89 ! MK 1.09 NL 0.99 OV 1.24 PT 0.90 ! SC 1.17 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.87 ! MK 1.12 NL 1.00 OV 1.25 PT 0.85 ! SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.91 ! MK 1.15 NL 0.98 OV 1.24 PT 0.83 ! SC 1.21 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.99 ! MK 1.05 NL 0.98 OV 1.17 PT 0.82 ! SC 1.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.94 ! MK 1.12 NL 0.99 OV 1.26 PT 0.87 ! SC 1.14 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.95 ! MK 1.14 NL 1.00 OV 1.28 PT 0.81 ! SC 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.97 ! MK 1.06 NL 1.02 OV 1.26 PT 0.84 ! SC 1.09 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.92 ! MK 1.18 NL 0.99 OV 1.33 PT 0.88 ! SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.92 ! MK 1.02 NL 0.99 OV 1.38 PT 0.86 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.97 ! MK 1.00 NL 1.06 OV 1.33 PT 0.85 ! SC 0.92 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.92 ! MK 1.05 NL 1.01 OV 1.42 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 0.91 ! MK 1.05 NL 1.01 OV 1.30 PT 0.88 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.066340Jy sigma=0.000755 ! Fit after self-cal, rms=0.069684Jy sigma=0.000738 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7538 mas, bmaj=1.79 mas, bpa=-0.04222 degrees ! Estimated noise=448.653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000718528 Jy ! Component: 100 - total flux cleaned = -0.000754224 Jy ! Component: 150 - total flux cleaned = -0.000784916 Jy ! Component: 200 - total flux cleaned = -0.000756925 Jy ! Total flux subtracted in 200 components = -0.000756925 Jy ! Clean residual min=-0.003480 max=0.004637 Jy/beam ! Clean residual mean=0.000055 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.0989754 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.0989754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069645Jy sigma=0.000738 ! Fit after self-cal, rms=0.069938Jy sigma=0.000736 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069938Jy sigma=0.000736 ! Fit after self-cal, rms=0.070696Jy sigma=0.000734 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7583 mas, bmaj=1.78 mas, bpa=0.2092 degrees ! Estimated noise=449.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000371058 Jy ! Component: 100 - total flux cleaned = -0.000392617 Jy ! Component: 150 - total flux cleaned = -0.000409378 Jy ! Component: 200 - total flux cleaned = -0.000424677 Jy ! Total flux subtracted in 200 components = -0.000424677 Jy ! Clean residual min=-0.002881 max=0.003886 Jy/beam ! Clean residual mean=0.000016 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.0985507 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0985507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070677Jy sigma=0.000734 ! Fit after self-cal, rms=0.070744Jy sigma=0.000734 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341959 Jy ! Component: 100 - total flux cleaned = 0.00438643 Jy ! Component: 150 - total flux cleaned = 0.00454698 Jy ! Component: 200 - total flux cleaned = 0.00458475 Jy ! Total flux subtracted in 200 components = 0.00458475 Jy ! Clean residual min=-0.002233 max=0.002253 Jy/beam ! Clean residual mean=-0.000010 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.103135 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.103135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070530Jy sigma=0.000732 ! Fit after self-cal, rms=0.070407Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070407Jy sigma=0.000732 ! Fit after self-cal, rms=0.069489Jy sigma=0.000731 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7543 mas, bmaj=1.784 mas, bpa=0.3495 degrees ! Estimated noise=444.519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194369 Jy ! Component: 100 - total flux cleaned = 0.00213318 Jy ! Component: 150 - total flux cleaned = 0.00216455 Jy ! Component: 200 - total flux cleaned = 0.0021924 Jy ! Total flux subtracted in 200 components = 0.0021924 Jy ! Clean residual min=-0.001942 max=0.001961 Jy/beam ! Clean residual mean=-0.000017 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.105328 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 69 components and 0.105328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069411Jy sigma=0.000731 ! Fit after self-cal, rms=0.069342Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497473 Jy ! Component: 100 - total flux cleaned = 0.000585467 Jy ! Component: 150 - total flux cleaned = 0.000586309 Jy ! Component: 200 - total flux cleaned = 0.000519097 Jy ! Total flux subtracted in 200 components = 0.000519097 Jy ! Clean residual min=-0.001999 max=0.001804 Jy/beam ! Clean residual mean=-0.000019 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.105847 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.105847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069310Jy sigma=0.000730 ! Fit after self-cal, rms=0.069276Jy sigma=0.000730 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069276Jy sigma=0.000730 ! Fit after self-cal, rms=0.068796Jy sigma=0.000730 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.164 mas, bmaj=4.626 mas, bpa=-1.813 degrees ! Estimated noise=574.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000890349 Jy ! Component: 100 - total flux cleaned = 0.00083024 Jy ! Component: 150 - total flux cleaned = 0.000729587 Jy ! Component: 200 - total flux cleaned = 0.000655458 Jy ! Total flux subtracted in 200 components = 0.000655458 Jy ! Clean residual min=-0.001755 max=0.001804 Jy/beam ! Clean residual mean=-0.000033 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.106502 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 82 components and 0.106502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068790Jy sigma=0.000730 ! Fit after self-cal, rms=0.068764Jy sigma=0.000730 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142884 Jy ! Component: 100 - total flux cleaned = 6.67481e-05 Jy ! Component: 150 - total flux cleaned = 4.45985e-06 Jy ! Component: 200 - total flux cleaned = -3.90182e-05 Jy ! Total flux subtracted in 200 components = -3.90182e-05 Jy ! Clean residual min=-0.001681 max=0.001755 Jy/beam ! Clean residual mean=-0.000032 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.106463 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 85 components and 0.106463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068765Jy sigma=0.000730 ! Fit after self-cal, rms=0.068763Jy sigma=0.000730 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7497 mas, bmaj=1.786 mas, bpa=0.3769 degrees ! Estimated noise=441.925 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7497 x 1.786 at 0.3769 degrees (North through East) ! Clean map min=-0.0015839 max=0.069555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6259 mas, bmaj=1.512 mas, bpa=1.554 degrees ! Estimated noise=1373.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0482938 Jy ! Component: 100 - total flux cleaned = 0.0651494 Jy ! Component: 150 - total flux cleaned = 0.0752719 Jy ! Component: 200 - total flux cleaned = 0.0806477 Jy ! Total flux subtracted in 200 components = 0.0806477 Jy ! Clean residual min=-0.005250 max=0.006544 Jy/beam ! Clean residual mean=0.000044 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.0806478 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0806478 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7497 mas, bmaj=1.786 mas, bpa=0.3769 degrees ! Estimated noise=441.925 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874655 Jy ! Component: 100 - total flux cleaned = 0.013939 Jy ! Component: 150 - total flux cleaned = 0.0176097 Jy ! Component: 200 - total flux cleaned = 0.0202477 Jy ! Total flux subtracted in 200 components = 0.0202477 Jy ! Clean residual min=-0.002715 max=0.002835 Jy/beam ! Clean residual mean=0.000028 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.100895 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.100895 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.164 mas, bmaj=4.626 mas, bpa=-1.813 degrees ! Estimated noise=574.385 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286787 Jy ! Component: 100 - total flux cleaned = 0.00420064 Jy ! Component: 150 - total flux cleaned = 0.00494632 Jy ! Component: 200 - total flux cleaned = 0.00519536 Jy ! Total flux subtracted in 200 components = 0.00519536 Jy ! Clean residual min=-0.001949 max=0.001863 Jy/beam ! Clean residual mean=-0.000022 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.106091 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.30749e-05 Jy ! Component: 100 - total flux cleaned = 9.17857e-05 Jy ! Component: 150 - total flux cleaned = 0.000118297 Jy ! Component: 200 - total flux cleaned = 0.000143406 Jy ! Total flux subtracted in 200 components = 0.000143406 Jy ! Clean residual min=-0.001878 max=0.001867 Jy/beam ! Clean residual mean=-0.000025 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.106234 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.106234 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7497 mas, bmaj=1.786 mas, bpa=0.3769 degrees ! Estimated noise=441.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273274 Jy ! Component: 100 - total flux cleaned = 0.000475055 Jy ! Component: 150 - total flux cleaned = 0.000544347 Jy ! Component: 200 - total flux cleaned = 0.000544892 Jy ! Total flux subtracted in 200 components = 0.000544892 Jy ! Clean residual min=-0.001935 max=0.001840 Jy/beam ! Clean residual mean=-0.000012 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.106779 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.106779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068780Jy sigma=0.000730 ! Fit after self-cal, rms=0.068766Jy sigma=0.000730 wmodel J0611-1155_X_2014_01_04_pus_map.mod ! Writing 70 model components to file: J0611-1155_X_2014_01_04_pus_map.mod wobs J0611-1155_X_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0611-1155_X_2014_01_04_pus_uvs.fits wwins J0611-1155_X_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0611-1155_X_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235214 Jy ! Component: 100 - total flux cleaned = -0.000417448 Jy ! Component: 150 - total flux cleaned = -0.000585106 Jy ! Component: 200 - total flux cleaned = -0.0006622 Jy ! Component: 250 - total flux cleaned = -0.000761034 Jy ! Component: 300 - total flux cleaned = -0.000855453 Jy ! Component: 350 - total flux cleaned = -0.000966392 Jy ! Component: 400 - total flux cleaned = -0.00107211 Jy ! Component: 450 - total flux cleaned = -0.00117239 Jy ! Component: 500 - total flux cleaned = -0.00126752 Jy ! Component: 550 - total flux cleaned = -0.00135907 Jy ! Component: 600 - total flux cleaned = -0.00148184 Jy ! Component: 650 - total flux cleaned = -0.00154943 Jy ! Component: 700 - total flux cleaned = -0.00161461 Jy ! Component: 750 - total flux cleaned = -0.00166153 Jy ! Component: 800 - total flux cleaned = -0.00167687 Jy ! Component: 850 - total flux cleaned = -0.00170639 Jy ! Component: 900 - total flux cleaned = -0.00172044 Jy ! Component: 950 - total flux cleaned = -0.00170671 Jy ! Component: 1000 - total flux cleaned = -0.00169329 Jy ! Component: 1050 - total flux cleaned = -0.00166741 Jy ! Component: 1100 - total flux cleaned = -0.00160518 Jy ! Component: 1150 - total flux cleaned = -0.00155712 Jy ! Component: 1200 - total flux cleaned = -0.00154546 Jy ! Component: 1250 - total flux cleaned = -0.00153371 Jy ! Component: 1300 - total flux cleaned = -0.00153361 Jy ! Component: 1350 - total flux cleaned = -0.00152266 Jy ! Component: 1400 - total flux cleaned = -0.00151192 Jy ! Component: 1450 - total flux cleaned = -0.00150153 Jy ! Component: 1500 - total flux cleaned = -0.00150151 Jy ! Component: 1550 - total flux cleaned = -0.00148147 Jy ! Component: 1600 - total flux cleaned = -0.00151113 Jy ! Component: 1650 - total flux cleaned = -0.0015405 Jy ! Component: 1700 - total flux cleaned = -0.00159801 Jy ! Component: 1750 - total flux cleaned = -0.00163594 Jy ! Component: 1800 - total flux cleaned = -0.00170155 Jy ! Component: 1850 - total flux cleaned = -0.00176646 Jy ! Component: 1900 - total flux cleaned = -0.00181233 Jy ! Component: 1950 - total flux cleaned = -0.00184859 Jy ! Component: 2000 - total flux cleaned = -0.00189371 Jy ! Total flux subtracted in 2048 components = -0.00192945 Jy ! Clean residual min=-0.000502 max=0.000545 Jy/beam ! Clean residual mean=-0.000006 rms=0.000157 Jy/beam ! Combined flux in latest and established models = 0.10485 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 187 components and 0.10485 Jy ![Exited script file: muppet] wmap "J0611-1155_X_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7497 x 1.786 at 0.3769 degrees (North through East) ! Clean map min=-0.0013334 max=0.068364 Jy/beam ! Writing clean map to FITS file: J0611-1155_X_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0683639 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000154314 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.677172 0.677172 1.35434 2.70869 5.41738 10.8348 21.6695 43.339 86.678 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7497 x 1.786 at 0.3769 degrees (North through East) ! Clean map min=-0.0013334 max=0.068364 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0611-1155_X_2014_01_04_pus_uvs.log closed on Fri Jan 13 17:22:34 2017