! Started logfile: J0611-1155_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:23 2017 obs J0611-1155_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0611-1155_S_2014_01_04_pus_uva.fits ! AN table 1: 117 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.500712 visibilities/baseline/integration-bin. ! Found source: J0611-1155 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0611-1155_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.865539Jy sigma=0.010770 ! Fit after self-cal, rms=0.835086Jy sigma=0.010366 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.609 mas, bmaj=5.553 mas, bpa=0.7117 degrees ! Estimated noise=1096.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124555 Jy ! Component: 100 - total flux cleaned = 0.163074 Jy ! Total flux subtracted in 100 components = 0.163074 Jy ! Clean residual min=-0.009302 max=0.017545 Jy/beam ! Clean residual mean=0.000026 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 0.163074 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.163074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095059Jy sigma=0.001078 ! Fit after self-cal, rms=0.094914Jy sigma=0.001077 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=6.301 mas, bpa=-0.251 degrees ! Estimated noise=645.101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030008 Jy ! Component: 100 - total flux cleaned = 0.045918 Jy ! Component: 150 - total flux cleaned = 0.0551522 Jy ! Component: 200 - total flux cleaned = 0.0607184 Jy ! Total flux subtracted in 200 components = 0.0607184 Jy ! Clean residual min=-0.006556 max=0.009968 Jy/beam ! Clean residual mean=0.000021 rms=0.002190 Jy/beam ! Combined flux in latest and established models = 0.223793 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 48 components and 0.223793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085102Jy sigma=0.000950 ! Fit after self-cal, rms=0.085146Jy sigma=0.000949 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 1.01 ! MK 1.02 NL 1.00 OV 0.94 PT 0.98 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.96 ! MK 1.03 NL 1.06 OV 0.97 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* KP 1.00* LA 0.82 ! MK 1.05 NL 1.01 OV 0.88 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.87 ! MK 1.02 NL 1.12 OV 1.02 PT 0.99 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.085146Jy sigma=0.000949 ! Fit after self-cal, rms=0.081821Jy sigma=0.000918 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=6.382 mas, bpa=0.1978 degrees ! Estimated noise=643.392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00862254 Jy ! Component: 100 - total flux cleaned = 0.0128518 Jy ! Component: 150 - total flux cleaned = 0.0145115 Jy ! Component: 200 - total flux cleaned = 0.0156476 Jy ! Total flux subtracted in 200 components = 0.0156476 Jy ! Clean residual min=-0.003482 max=0.004161 Jy/beam ! Clean residual mean=0.000004 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.23944 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 86 components and 0.23944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080997Jy sigma=0.000905 ! Fit after self-cal, rms=0.080666Jy sigma=0.000904 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080666Jy sigma=0.000904 ! Fit after self-cal, rms=0.079875Jy sigma=0.000902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=6.374 mas, bpa=0.1543 degrees ! Estimated noise=641.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271875 Jy ! Component: 100 - total flux cleaned = 0.0035774 Jy ! Component: 150 - total flux cleaned = 0.00380051 Jy ! Component: 200 - total flux cleaned = 0.00399123 Jy ! Total flux subtracted in 200 components = 0.00399123 Jy ! Clean residual min=-0.002748 max=0.002891 Jy/beam ! Clean residual mean=0.000000 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.243432 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 108 components and 0.243432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079779Jy sigma=0.000900 ! Fit after self-cal, rms=0.079692Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000976005 Jy ! Component: 100 - total flux cleaned = 0.00123521 Jy ! Component: 150 - total flux cleaned = 0.00128887 Jy ! Component: 200 - total flux cleaned = 0.00131352 Jy ! Total flux subtracted in 200 components = 0.00131352 Jy ! Clean residual min=-0.002617 max=0.002758 Jy/beam ! Clean residual mean=-0.000000 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.244745 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 118 components and 0.244745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079668Jy sigma=0.000900 ! Fit after self-cal, rms=0.079666Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079666Jy sigma=0.000900 ! Fit after self-cal, rms=0.079460Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=6.378 mas, bpa=0.1311 degrees ! Estimated noise=640.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114618 Jy ! Component: 100 - total flux cleaned = 0.00120525 Jy ! Component: 150 - total flux cleaned = 0.00128066 Jy ! Component: 200 - total flux cleaned = 0.00132349 Jy ! Total flux subtracted in 200 components = 0.00132349 Jy ! Clean residual min=-0.002492 max=0.002291 Jy/beam ! Clean residual mean=-0.000000 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.246069 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 127 components and 0.246069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079437Jy sigma=0.000899 ! Fit after self-cal, rms=0.079415Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338828 Jy ! Component: 100 - total flux cleaned = 0.000457444 Jy ! Component: 150 - total flux cleaned = 0.000491679 Jy ! Component: 200 - total flux cleaned = 0.000507394 Jy ! Total flux subtracted in 200 components = 0.000507394 Jy ! Clean residual min=-0.002463 max=0.002221 Jy/beam ! Clean residual mean=-0.000000 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.246576 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 0.246576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079407Jy sigma=0.000899 ! Fit after self-cal, rms=0.079410Jy sigma=0.000899 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079410Jy sigma=0.000899 ! Fit after self-cal, rms=0.079390Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=13.42 mas, bpa=11.28 degrees ! Estimated noise=793.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122535 Jy ! Component: 100 - total flux cleaned = 0.00146177 Jy ! Component: 150 - total flux cleaned = 0.00150283 Jy ! Component: 200 - total flux cleaned = 0.00143264 Jy ! Total flux subtracted in 200 components = 0.00143264 Jy ! Clean residual min=-0.002410 max=0.002560 Jy/beam ! Clean residual mean=-0.000001 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.248009 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 156 components and 0.248009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079391Jy sigma=0.000899 ! Fit after self-cal, rms=0.079375Jy sigma=0.000898 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00033159 Jy ! Component: 100 - total flux cleaned = 0.000368984 Jy ! Component: 150 - total flux cleaned = 0.00032269 Jy ! Component: 200 - total flux cleaned = 0.00027946 Jy ! Total flux subtracted in 200 components = 0.00027946 Jy ! Clean residual min=-0.002293 max=0.002461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.248288 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 166 components and 0.248288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079379Jy sigma=0.000898 ! Fit after self-cal, rms=0.079375Jy sigma=0.000898 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=6.383 mas, bpa=0.1587 degrees ! Estimated noise=640.484 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 6.383 at 0.1587 degrees (North through East) ! Clean map min=-0.0023272 max=0.16553 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=5.613 mas, bpa=1.29 degrees ! Estimated noise=1100.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12507 Jy ! Component: 100 - total flux cleaned = 0.164583 Jy ! Component: 150 - total flux cleaned = 0.185373 Jy ! Component: 200 - total flux cleaned = 0.199274 Jy ! Total flux subtracted in 200 components = 0.199274 Jy ! Clean residual min=-0.005756 max=0.008786 Jy/beam ! Clean residual mean=0.000010 rms=0.001768 Jy/beam ! Combined flux in latest and established models = 0.199274 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.199274 Jy ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=6.383 mas, bpa=0.1587 degrees ! Estimated noise=640.484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141731 Jy ! Component: 100 - total flux cleaned = 0.0232058 Jy ! Component: 150 - total flux cleaned = 0.0294554 Jy ! Component: 200 - total flux cleaned = 0.0338689 Jy ! Total flux subtracted in 200 components = 0.0338689 Jy ! Clean residual min=-0.003086 max=0.003364 Jy/beam ! Clean residual mean=0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.233143 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 71 components and 0.233143 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.404 mas, bmaj=13.42 mas, bpa=11.28 degrees ! Estimated noise=793.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532457 Jy ! Component: 100 - total flux cleaned = 0.0083051 Jy ! Component: 150 - total flux cleaned = 0.0101866 Jy ! Component: 200 - total flux cleaned = 0.0115044 Jy ! Total flux subtracted in 200 components = 0.0115044 Jy ! Clean residual min=-0.002270 max=0.002698 Jy/beam ! Clean residual mean=0.000002 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.244647 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000966936 Jy ! Component: 100 - total flux cleaned = 0.00171845 Jy ! Component: 150 - total flux cleaned = 0.00208814 Jy ! Component: 200 - total flux cleaned = 0.00234448 Jy ! Total flux subtracted in 200 components = 0.00234448 Jy ! Clean residual min=-0.002234 max=0.002396 Jy/beam ! Clean residual mean=-0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.246992 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 147 components and 0.246992 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=6.383 mas, bpa=0.1587 degrees ! Estimated noise=640.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213007 Jy ! Component: 100 - total flux cleaned = 0.000103185 Jy ! Component: 150 - total flux cleaned = 0.000102253 Jy ! Component: 200 - total flux cleaned = 0.000129635 Jy ! Total flux subtracted in 200 components = 0.000129635 Jy ! Clean residual min=-0.002255 max=0.001989 Jy/beam ! Clean residual mean=-0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.247121 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 163 components and 0.247121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079386Jy sigma=0.000898 ! Fit after self-cal, rms=0.079353Jy sigma=0.000898 wmodel J0611-1155_S_2014_01_04_pus_map.mod ! Writing 163 model components to file: J0611-1155_S_2014_01_04_pus_map.mod wobs J0611-1155_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0611-1155_S_2014_01_04_pus_uvs.fits wwins J0611-1155_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0611-1155_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000597889 Jy ! Component: 100 - total flux cleaned = -0.000369265 Jy ! Component: 150 - total flux cleaned = -9.44005e-05 Jy ! Component: 200 - total flux cleaned = -3.73201e-05 Jy ! Component: 250 - total flux cleaned = 1.69468e-05 Jy ! Component: 300 - total flux cleaned = 4.25821e-05 Jy ! Component: 350 - total flux cleaned = 6.82149e-05 Jy ! Component: 400 - total flux cleaned = 0.000140721 Jy ! Component: 450 - total flux cleaned = 0.000210928 Jy ! Component: 500 - total flux cleaned = 0.00030031 Jy ! Component: 550 - total flux cleaned = 0.000450873 Jy ! Component: 600 - total flux cleaned = 0.000492549 Jy ! Component: 650 - total flux cleaned = 0.000573848 Jy ! Component: 700 - total flux cleaned = 0.000593479 Jy ! Component: 750 - total flux cleaned = 0.000593404 Jy ! Component: 800 - total flux cleaned = 0.000631485 Jy ! Component: 850 - total flux cleaned = 0.000687033 Jy ! Component: 900 - total flux cleaned = 0.000668896 Jy ! Component: 950 - total flux cleaned = 0.000669193 Jy ! Component: 1000 - total flux cleaned = 0.000686201 Jy ! Component: 1050 - total flux cleaned = 0.000652491 Jy ! Component: 1100 - total flux cleaned = 0.000619858 Jy ! Component: 1150 - total flux cleaned = 0.000700342 Jy ! Component: 1200 - total flux cleaned = 0.000716062 Jy ! Component: 1250 - total flux cleaned = 0.000777958 Jy ! Component: 1300 - total flux cleaned = 0.000823418 Jy ! Component: 1350 - total flux cleaned = 0.000867854 Jy ! Component: 1400 - total flux cleaned = 0.000882471 Jy ! Component: 1450 - total flux cleaned = 0.00094015 Jy ! Component: 1500 - total flux cleaned = 0.000996723 Jy ! Component: 1550 - total flux cleaned = 0.000968875 Jy ! Component: 1600 - total flux cleaned = 0.00101009 Jy ! Component: 1650 - total flux cleaned = 0.00102341 Jy ! Component: 1700 - total flux cleaned = 0.00104985 Jy ! Component: 1750 - total flux cleaned = 0.00103678 Jy ! Component: 1800 - total flux cleaned = 0.00107565 Jy ! Component: 1850 - total flux cleaned = 0.00113948 Jy ! Component: 1900 - total flux cleaned = 0.00116489 Jy ! Component: 1950 - total flux cleaned = 0.00118998 Jy ! Component: 2000 - total flux cleaned = 0.0012024 Jy ! Component: 2050 - total flux cleaned = 0.00125132 Jy ! Component: 2100 - total flux cleaned = 0.00126324 Jy ! Component: 2150 - total flux cleaned = 0.00123939 Jy ! Component: 2200 - total flux cleaned = 0.00126325 Jy ! Component: 2250 - total flux cleaned = 0.00126329 Jy ! Component: 2300 - total flux cleaned = 0.00127499 Jy ! Component: 2350 - total flux cleaned = 0.00129802 Jy ! Component: 2400 - total flux cleaned = 0.00129802 Jy ! Component: 2450 - total flux cleaned = 0.00127533 Jy ! Component: 2500 - total flux cleaned = 0.00126391 Jy ! Component: 2550 - total flux cleaned = 0.00123026 Jy ! Component: 2600 - total flux cleaned = 0.00119693 Jy ! Component: 2650 - total flux cleaned = 0.00119703 Jy ! Component: 2700 - total flux cleaned = 0.00120803 Jy ! Component: 2750 - total flux cleaned = 0.00120798 Jy ! Component: 2800 - total flux cleaned = 0.00118619 Jy ! Component: 2850 - total flux cleaned = 0.00120795 Jy ! Component: 2900 - total flux cleaned = 0.00119722 Jy ! Component: 2950 - total flux cleaned = 0.00119724 Jy ! Component: 3000 - total flux cleaned = 0.00119725 Jy ! Component: 3050 - total flux cleaned = 0.00117589 Jy ! Component: 3100 - total flux cleaned = 0.00116524 Jy ! Component: 3150 - total flux cleaned = 0.0011652 Jy ! Component: 3200 - total flux cleaned = 0.00115467 Jy ! Component: 3250 - total flux cleaned = 0.00114415 Jy ! Component: 3300 - total flux cleaned = 0.00115461 Jy ! Component: 3350 - total flux cleaned = 0.00115455 Jy ! Component: 3400 - total flux cleaned = 0.00116506 Jy ! Component: 3450 - total flux cleaned = 0.00117548 Jy ! Component: 3500 - total flux cleaned = 0.00117549 Jy ! Component: 3550 - total flux cleaned = 0.00117553 Jy ! Component: 3600 - total flux cleaned = 0.00119624 Jy ! Component: 3650 - total flux cleaned = 0.00121692 Jy ! Component: 3700 - total flux cleaned = 0.0012478 Jy ! Component: 3750 - total flux cleaned = 0.00124781 Jy ! Component: 3800 - total flux cleaned = 0.00128891 Jy ! Component: 3850 - total flux cleaned = 0.00128896 Jy ! Component: 3900 - total flux cleaned = 0.00131967 Jy ! Component: 3950 - total flux cleaned = 0.00135029 Jy ! Component: 4000 - total flux cleaned = 0.00134011 Jy ! Component: 4050 - total flux cleaned = 0.00135028 Jy ! Total flux subtracted in 4096 components = 0.0013401 Jy ! Clean residual min=-0.000627 max=0.000777 Jy/beam ! Clean residual mean=-0.000000 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.248461 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 402 components and 0.248461 Jy ![Exited script file: muppet] wmap "J0611-1155_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 6.383 at 0.1587 degrees (North through East) ! Clean map min=-0.0011384 max=0.16685 Jy/beam ! Writing clean map to FITS file: J0611-1155_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.166848 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155324 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.279278 0.279278 0.558556 1.11711 2.23423 4.46845 8.9369 17.8738 35.7476 71.4952 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.166 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.082 x 6.383 at 0.1587 degrees (North through East) ! Clean map min=-0.0011384 max=0.16685 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0611-1155_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:18:27 2017