! Started logfile: J0610+7801_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:49:09 2017 obs J0610+7801_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J0610+7801_S_2015_01_22_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0610+7801 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0610+7801_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920774Jy sigma=0.009141 ! Fit after self-cal, rms=0.892269Jy sigma=0.008855 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=10.57 mas, bpa=41.5 degrees ! Estimated noise=1463.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0864488 Jy ! Component: 100 - total flux cleaned = 0.105312 Jy ! Total flux subtracted in 100 components = 0.105312 Jy ! Clean residual min=-0.006149 max=0.009502 Jy/beam ! Clean residual mean=0.000000 rms=0.001732 Jy/beam ! Combined flux in latest and established models = 0.105312 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.105312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085388Jy sigma=0.000783 ! Fit after self-cal, rms=0.085385Jy sigma=0.000782 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=11.16 mas, bpa=39.8 degrees ! Estimated noise=792.309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-58, -117.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781856 Jy ! Component: 100 - total flux cleaned = 0.0118445 Jy ! Component: 150 - total flux cleaned = 0.0140411 Jy ! Component: 200 - total flux cleaned = 0.0149317 Jy ! Total flux subtracted in 200 components = 0.0149317 Jy ! Clean residual min=-0.003609 max=0.004956 Jy/beam ! Clean residual mean=0.000003 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.120243 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 46 components and 0.120243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084545Jy sigma=0.000776 ! Fit after self-cal, rms=0.084553Jy sigma=0.000776 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.98 KP 1.09 ! LA 1.00 MK 1.00 NL 0.95 OV 1.02 ! PT 1.09 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.01 KP 1.01 ! LA 0.94 MK 1.03 NL 0.92 OV 1.00 ! PT 1.11 SC 1.19 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.01 KP 0.89 ! LA 0.82 MK 1.04 NL 1.02 OV 0.95 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 0.99 KP 0.82 ! LA 0.87 MK 1.00 NL 1.08 OV 0.99 ! PT 1.06 SC 1.03 ! ! ! Fit before self-cal, rms=0.084553Jy sigma=0.000776 ! Fit after self-cal, rms=0.083020Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=11.15 mas, bpa=39.83 degrees ! Estimated noise=791.918 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000616219 Jy ! Component: 100 - total flux cleaned = -0.000772235 Jy ! Component: 150 - total flux cleaned = -0.000876768 Jy ! Component: 200 - total flux cleaned = -0.000940524 Jy ! Total flux subtracted in 200 components = -0.000940524 Jy ! Clean residual min=-0.001852 max=0.001881 Jy/beam ! Clean residual mean=0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.119303 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.119303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082984Jy sigma=0.000767 ! Fit after self-cal, rms=0.082980Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082980Jy sigma=0.000767 ! Fit after self-cal, rms=0.083071Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=11.15 mas, bpa=39.85 degrees ! Estimated noise=791.638 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176783 Jy ! Component: 100 - total flux cleaned = -0.000234622 Jy ! Component: 150 - total flux cleaned = -0.000315826 Jy ! Component: 200 - total flux cleaned = -0.000391422 Jy ! Total flux subtracted in 200 components = -0.000391422 Jy ! Clean residual min=-0.001817 max=0.001878 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.118911 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.118911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083051Jy sigma=0.000767 ! Fit after self-cal, rms=0.083052Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.32206e-05 Jy ! Component: 100 - total flux cleaned = -0.000129407 Jy ! Component: 150 - total flux cleaned = -0.000129209 Jy ! Component: 200 - total flux cleaned = -0.000172527 Jy ! Total flux subtracted in 200 components = -0.000172527 Jy ! Clean residual min=-0.001812 max=0.001856 Jy/beam ! Clean residual mean=0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.118739 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 94 components and 0.118739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083039Jy sigma=0.000767 ! Fit after self-cal, rms=0.083040Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083040Jy sigma=0.000767 ! Fit after self-cal, rms=0.083027Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=11.15 mas, bpa=39.86 degrees ! Estimated noise=790.866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178292 Jy ! Component: 100 - total flux cleaned = -0.000264013 Jy ! Component: 150 - total flux cleaned = -0.000304712 Jy ! Component: 200 - total flux cleaned = -0.000343793 Jy ! Total flux subtracted in 200 components = -0.000343793 Jy ! Clean residual min=-0.001815 max=0.001847 Jy/beam ! Clean residual mean=0.000001 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.118395 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 106 components and 0.118395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083016Jy sigma=0.000767 ! Fit after self-cal, rms=0.083018Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.17655e-05 Jy ! Component: 100 - total flux cleaned = -8.16293e-05 Jy ! Component: 150 - total flux cleaned = -0.000117751 Jy ! Component: 200 - total flux cleaned = -0.000117689 Jy ! Total flux subtracted in 200 components = -0.000117689 Jy ! Clean residual min=-0.001820 max=0.001845 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.118277 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 115 components and 0.118277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083009Jy sigma=0.000766 ! Fit after self-cal, rms=0.083010Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083010Jy sigma=0.000766 ! Fit after self-cal, rms=0.082958Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.856 mas, bmaj=15.75 mas, bpa=32.87 degrees ! Estimated noise=1024.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293651 Jy ! Component: 100 - total flux cleaned = -0.000415957 Jy ! Component: 150 - total flux cleaned = -0.00045564 Jy ! Component: 200 - total flux cleaned = -0.000480111 Jy ! Total flux subtracted in 200 components = -0.000480111 Jy ! Clean residual min=-0.001657 max=0.002327 Jy/beam ! Clean residual mean=0.000003 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.117797 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 137 components and 0.117797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082955Jy sigma=0.000766 ! Fit after self-cal, rms=0.082955Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (52.5, 33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127856 Jy ! Component: 100 - total flux cleaned = 0.00126815 Jy ! Component: 150 - total flux cleaned = 0.00134064 Jy ! Component: 200 - total flux cleaned = 0.00165063 Jy ! Total flux subtracted in 200 components = 0.00165063 Jy ! Clean residual min=-0.001188 max=0.001089 Jy/beam ! Clean residual mean=0.000007 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.119448 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 185 components and 0.119448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082926Jy sigma=0.000766 ! Fit after self-cal, rms=0.082919Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.16 mas, bpa=39.86 degrees ! Estimated noise=790.222 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 11.16 at 39.86 degrees (North through East) ! Clean map min=-0.0015231 max=0.10814 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.265 mas, bmaj=10.49 mas, bpa=41.62 degrees ! Estimated noise=1477.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871549 Jy ! Component: 100 - total flux cleaned = 0.10625 Jy ! Component: 150 - total flux cleaned = 0.108057 Jy ! Component: 200 - total flux cleaned = 0.108969 Jy ! Total flux subtracted in 200 components = 0.108969 Jy ! Clean residual min=-0.005661 max=0.004857 Jy/beam ! Clean residual mean=0.000001 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.108969 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.108969 Jy ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.16 mas, bpa=39.86 degrees ! Estimated noise=790.222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326978 Jy ! Component: 100 - total flux cleaned = 0.00379909 Jy ! Component: 150 - total flux cleaned = 0.00408054 Jy ! Component: 200 - total flux cleaned = 0.00454719 Jy ! Total flux subtracted in 200 components = 0.00454719 Jy ! Clean residual min=-0.002337 max=0.001801 Jy/beam ! Clean residual mean=-0.000000 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.113516 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 65 components and 0.113516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.856 mas, bmaj=15.75 mas, bpa=32.87 degrees ! Estimated noise=1024.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112267 Jy ! Component: 100 - total flux cleaned = 0.00206952 Jy ! Component: 150 - total flux cleaned = 0.00298116 Jy ! Component: 200 - total flux cleaned = 0.00378213 Jy ! Total flux subtracted in 200 components = 0.00378213 Jy ! Clean residual min=-0.001615 max=0.001479 Jy/beam ! Clean residual mean=0.000004 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.117298 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712996 Jy ! Component: 100 - total flux cleaned = 0.0013229 Jy ! Component: 150 - total flux cleaned = 0.00187275 Jy ! Component: 200 - total flux cleaned = 0.00233365 Jy ! Total flux subtracted in 200 components = 0.00233365 Jy ! Clean residual min=-0.001424 max=0.001299 Jy/beam ! Clean residual mean=0.000007 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.119632 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 153 components and 0.119632 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=11.16 mas, bpa=39.86 degrees ! Estimated noise=790.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181662 Jy ! Component: 100 - total flux cleaned = -0.000266374 Jy ! Component: 150 - total flux cleaned = -8.09102e-05 Jy ! Component: 200 - total flux cleaned = 2.15559e-05 Jy ! Total flux subtracted in 200 components = 2.15559e-05 Jy ! Clean residual min=-0.001849 max=0.001706 Jy/beam ! Clean residual mean=0.000002 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.119654 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 174 components and 0.119653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082941Jy sigma=0.000766 ! Fit after self-cal, rms=0.082928Jy sigma=0.000766 wmodel J0610+7801_S_2015_01_22_pus_map.mod ! Writing 174 model components to file: J0610+7801_S_2015_01_22_pus_map.mod wobs J0610+7801_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J0610+7801_S_2015_01_22_pus_uvs.fits wwins J0610+7801_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J0610+7801_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.14621e-05 Jy ! Component: 100 - total flux cleaned = 7.44068e-05 Jy ! Component: 150 - total flux cleaned = -3.19466e-05 Jy ! Component: 200 - total flux cleaned = -0.000211547 Jy ! Component: 250 - total flux cleaned = -0.000359372 Jy ! Component: 300 - total flux cleaned = -0.000477477 Jy ! Component: 350 - total flux cleaned = -0.000545801 Jy ! Component: 400 - total flux cleaned = -0.00063437 Jy ! Component: 450 - total flux cleaned = -0.000634531 Jy ! Component: 500 - total flux cleaned = -0.00067732 Jy ! Component: 550 - total flux cleaned = -0.000718827 Jy ! Component: 600 - total flux cleaned = -0.000738813 Jy ! Component: 650 - total flux cleaned = -0.000798284 Jy ! Component: 700 - total flux cleaned = -0.000856755 Jy ! Component: 750 - total flux cleaned = -0.000933195 Jy ! Component: 800 - total flux cleaned = -0.000989397 Jy ! Component: 850 - total flux cleaned = -0.00104483 Jy ! Component: 900 - total flux cleaned = -0.00106311 Jy ! Component: 950 - total flux cleaned = -0.00117044 Jy ! Component: 1000 - total flux cleaned = -0.00122298 Jy ! Component: 1050 - total flux cleaned = -0.00120588 Jy ! Component: 1100 - total flux cleaned = -0.00130858 Jy ! Component: 1150 - total flux cleaned = -0.00130837 Jy ! Component: 1200 - total flux cleaned = -0.00134149 Jy ! Component: 1250 - total flux cleaned = -0.00134107 Jy ! Component: 1300 - total flux cleaned = -0.00134097 Jy ! Component: 1350 - total flux cleaned = -0.00138915 Jy ! Component: 1400 - total flux cleaned = -0.00145247 Jy ! Component: 1450 - total flux cleaned = -0.00149952 Jy ! Component: 1500 - total flux cleaned = -0.00156132 Jy ! Component: 1550 - total flux cleaned = -0.00162261 Jy ! Component: 1600 - total flux cleaned = -0.00162262 Jy ! Component: 1650 - total flux cleaned = -0.0016676 Jy ! Component: 1700 - total flux cleaned = -0.00168241 Jy ! Component: 1750 - total flux cleaned = -0.00165316 Jy ! Component: 1800 - total flux cleaned = -0.00168273 Jy ! Component: 1850 - total flux cleaned = -0.00174056 Jy ! Component: 1900 - total flux cleaned = -0.0018124 Jy ! Component: 1950 - total flux cleaned = -0.00182665 Jy ! Component: 2000 - total flux cleaned = -0.00184077 Jy ! Component: 2050 - total flux cleaned = -0.00189695 Jy ! Component: 2100 - total flux cleaned = -0.00199429 Jy ! Component: 2150 - total flux cleaned = -0.00199438 Jy ! Component: 2200 - total flux cleaned = -0.00206287 Jy ! Component: 2250 - total flux cleaned = -0.00217151 Jy ! Component: 2300 - total flux cleaned = -0.00223881 Jy ! Component: 2350 - total flux cleaned = -0.00229227 Jy ! Component: 2400 - total flux cleaned = -0.00233215 Jy ! Component: 2450 - total flux cleaned = -0.00238489 Jy ! Component: 2500 - total flux cleaned = -0.00242442 Jy ! Component: 2550 - total flux cleaned = -0.00251579 Jy ! Component: 2600 - total flux cleaned = -0.00259355 Jy ! Component: 2650 - total flux cleaned = -0.00263219 Jy ! Component: 2700 - total flux cleaned = -0.0026964 Jy ! Component: 2750 - total flux cleaned = -0.00276016 Jy ! Component: 2800 - total flux cleaned = -0.00279828 Jy ! Component: 2850 - total flux cleaned = -0.00283616 Jy ! Component: 2900 - total flux cleaned = -0.00292405 Jy ! Component: 2950 - total flux cleaned = -0.00301145 Jy ! Component: 3000 - total flux cleaned = -0.00304868 Jy ! Component: 3050 - total flux cleaned = -0.00309819 Jy ! Component: 3100 - total flux cleaned = -0.00315973 Jy ! Component: 3150 - total flux cleaned = -0.00323337 Jy ! Component: 3200 - total flux cleaned = -0.00329437 Jy ! Component: 3250 - total flux cleaned = -0.00334295 Jy ! Component: 3300 - total flux cleaned = -0.00345194 Jy ! Component: 3350 - total flux cleaned = -0.00347607 Jy ! Component: 3400 - total flux cleaned = -0.00356024 Jy ! Component: 3450 - total flux cleaned = -0.00364405 Jy ! Component: 3500 - total flux cleaned = -0.00372758 Jy ! Component: 3550 - total flux cleaned = -0.0037514 Jy ! Component: 3600 - total flux cleaned = -0.00383454 Jy ! Component: 3650 - total flux cleaned = -0.00394106 Jy ! Component: 3700 - total flux cleaned = -0.00400004 Jy ! Component: 3750 - total flux cleaned = -0.00411779 Jy ! Component: 3800 - total flux cleaned = -0.00414131 Jy ! Component: 3850 - total flux cleaned = -0.0042702 Jy ! Component: 3900 - total flux cleaned = -0.00431702 Jy ! Component: 3950 - total flux cleaned = -0.00431702 Jy ! Component: 4000 - total flux cleaned = -0.004387 Jy ! Component: 4050 - total flux cleaned = -0.00446844 Jy ! Total flux subtracted in 4096 components = -0.00451485 Jy ! Clean residual min=-0.000788 max=0.000735 Jy/beam ! Clean residual mean=-0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.115139 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 410 components and 0.115139 Jy ![Exited script file: muppet] wmap "J0610+7801_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 11.16 at 39.86 degrees (North through East) ! Clean map min=-0.0016854 max=0.10835 Jy/beam ! Writing clean map to FITS file: J0610+7801_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108347 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193465 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.535681 0.535681 1.07136 2.14272 4.28545 8.57089 17.1418 34.2836 68.5672 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 11.16 at 39.86 degrees (North through East) ! Clean map min=-0.0016854 max=0.10835 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0610+7801_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:49:16 2017