! Started logfile: J0608-3847_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:45:46 2016 obs J0608-3847_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0608-3847_S_2014_06_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.531497 visibilities/baseline/integration-bin. ! Found source: J0608-3847 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 11576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0608-3847_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970632Jy sigma=0.007192 ! Fit after self-cal, rms=0.895093Jy sigma=0.006657 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=8.158 mas, bpa=5.617 degrees ! Estimated noise=1762.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869096 Jy ! Component: 100 - total flux cleaned = 0.113235 Jy ! Total flux subtracted in 100 components = 0.113235 Jy ! Clean residual min=-0.008247 max=0.012070 Jy/beam ! Clean residual mean=-0.000028 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.113235 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.113235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129551Jy sigma=0.000773 ! Fit after self-cal, rms=0.129432Jy sigma=0.000772 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.346 mas, bmaj=10.42 mas, bpa=3.664 degrees ! Estimated noise=908.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104041 Jy ! Component: 100 - total flux cleaned = 0.0143727 Jy ! Component: 150 - total flux cleaned = 0.0153944 Jy ! Component: 200 - total flux cleaned = 0.0156064 Jy ! Total flux subtracted in 200 components = 0.0156064 Jy ! Clean residual min=-0.004079 max=0.004701 Jy/beam ! Clean residual mean=-0.000015 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.128841 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.128841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128905Jy sigma=0.000765 ! Fit after self-cal, rms=0.128912Jy sigma=0.000765 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.00* KP 1.03 ! LA 1.15 MK 1.27 NL 1.15 OV 0.93 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.04 ! LA 1.12 MK 1.26 NL 1.22 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.92 ! LA 0.86 MK 0.97 NL 1.18 OV 0.92 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 0.89 ! LA 0.88 MK 0.43 NL 1.25 OV 0.97 ! PT 1.02 SC 0.91 ! ! ! Fit before self-cal, rms=0.128912Jy sigma=0.000765 ! Fit after self-cal, rms=0.118501Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=10.43 mas, bpa=4.03 degrees ! Estimated noise=912.873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.76731e-05 Jy ! Component: 100 - total flux cleaned = -3.16684e-05 Jy ! Component: 150 - total flux cleaned = -7.33958e-05 Jy ! Component: 200 - total flux cleaned = -0.000111726 Jy ! Total flux subtracted in 200 components = -0.000111726 Jy ! Clean residual min=-0.002980 max=0.003421 Jy/beam ! Clean residual mean=-0.000014 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.12873 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.12873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118489Jy sigma=0.000756 ! Fit after self-cal, rms=0.118629Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118629Jy sigma=0.000755 ! Fit after self-cal, rms=0.120246Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=10.48 mas, bpa=4.258 degrees ! Estimated noise=916.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132628 Jy ! Component: 100 - total flux cleaned = 0.000134044 Jy ! Component: 150 - total flux cleaned = 0.000107111 Jy ! Component: 200 - total flux cleaned = 9.41175e-05 Jy ! Total flux subtracted in 200 components = 9.41175e-05 Jy ! Clean residual min=-0.002848 max=0.002550 Jy/beam ! Clean residual mean=-0.000009 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.128824 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.128824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120239Jy sigma=0.000755 ! Fit after self-cal, rms=0.120270Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.77312e-05 Jy ! Component: 100 - total flux cleaned = -8.26473e-05 Jy ! Component: 150 - total flux cleaned = -9.42988e-05 Jy ! Component: 200 - total flux cleaned = -9.43278e-05 Jy ! Total flux subtracted in 200 components = -9.43278e-05 Jy ! Clean residual min=-0.002851 max=0.002570 Jy/beam ! Clean residual mean=-0.000010 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.128729 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.128729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120267Jy sigma=0.000755 ! Fit after self-cal, rms=0.120267Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120267Jy sigma=0.000755 ! Fit after self-cal, rms=0.122764Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=10.61 mas, bpa=4.71 degrees ! Estimated noise=922.854 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.77428e-05 Jy ! Component: 100 - total flux cleaned = 8.86709e-05 Jy ! Component: 150 - total flux cleaned = 0.00010434 Jy ! Component: 200 - total flux cleaned = 9.37778e-05 Jy ! Total flux subtracted in 200 components = 9.37778e-05 Jy ! Clean residual min=-0.002920 max=0.002458 Jy/beam ! Clean residual mean=-0.000006 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.128823 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.128823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122754Jy sigma=0.000754 ! Fit after self-cal, rms=0.122775Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.51891e-05 Jy ! Component: 100 - total flux cleaned = -6.34129e-05 Jy ! Component: 150 - total flux cleaned = -5.43925e-05 Jy ! Component: 200 - total flux cleaned = -5.44381e-05 Jy ! Total flux subtracted in 200 components = -5.44381e-05 Jy ! Clean residual min=-0.002912 max=0.002463 Jy/beam ! Clean residual mean=-0.000007 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.128769 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.128769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122772Jy sigma=0.000754 ! Fit after self-cal, rms=0.122772Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122772Jy sigma=0.000754 ! Fit after self-cal, rms=0.124257Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.365 mas, bmaj=32.54 mas, bpa=-0.8053 degrees ! Estimated noise=1079.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238451 Jy ! Component: 100 - total flux cleaned = 0.000236275 Jy ! Component: 150 - total flux cleaned = 0.000234999 Jy ! Component: 200 - total flux cleaned = 0.000234149 Jy ! Total flux subtracted in 200 components = 0.000234149 Jy ! Clean residual min=-0.002718 max=0.002602 Jy/beam ! Clean residual mean=-0.000011 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.129003 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.129003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124256Jy sigma=0.000754 ! Fit after self-cal, rms=0.124257Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.77966e-05 Jy ! Component: 100 - total flux cleaned = 2.80413e-05 Jy ! Component: 150 - total flux cleaned = 2.86969e-05 Jy ! Component: 200 - total flux cleaned = 2.93185e-05 Jy ! Total flux subtracted in 200 components = 2.93185e-05 Jy ! Clean residual min=-0.002715 max=0.002588 Jy/beam ! Clean residual mean=-0.000011 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.129032 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.129032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124256Jy sigma=0.000754 ! Fit after self-cal, rms=0.124252Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=10.7 mas, bpa=5.034 degrees ! Estimated noise=928.485 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 10.7 at 5.034 degrees (North through East) ! Clean map min=-0.0027663 max=0.10791 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=8.247 mas, bpa=6.558 degrees ! Estimated noise=1787.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0876606 Jy ! Component: 100 - total flux cleaned = 0.113667 Jy ! Component: 150 - total flux cleaned = 0.122182 Jy ! Component: 200 - total flux cleaned = 0.125497 Jy ! Total flux subtracted in 200 components = 0.125497 Jy ! Clean residual min=-0.005124 max=0.004926 Jy/beam ! Clean residual mean=-0.000005 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.125497 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.125497 Jy ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=10.7 mas, bpa=5.034 degrees ! Estimated noise=928.485 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031079 Jy ! Component: 100 - total flux cleaned = 0.00336012 Jy ! Component: 150 - total flux cleaned = 0.0035448 Jy ! Component: 200 - total flux cleaned = 0.00363605 Jy ! Total flux subtracted in 200 components = 0.00363605 Jy ! Clean residual min=-0.002837 max=0.002275 Jy/beam ! Clean residual mean=-0.000005 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.129134 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 37 components and 0.129133 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.365 mas, bmaj=32.54 mas, bpa=-0.8053 degrees ! Estimated noise=1079.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.74799e-05 Jy ! Component: 100 - total flux cleaned = -0.000114484 Jy ! Component: 150 - total flux cleaned = -0.000127434 Jy ! Component: 200 - total flux cleaned = -0.000139168 Jy ! Total flux subtracted in 200 components = -0.000139168 Jy ! Clean residual min=-0.002791 max=0.002316 Jy/beam ! Clean residual mean=-0.000011 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.128994 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.0584e-05 Jy ! Component: 100 - total flux cleaned = -3.16121e-05 Jy ! Component: 150 - total flux cleaned = -4.16945e-05 Jy ! Component: 200 - total flux cleaned = -6.12733e-05 Jy ! Total flux subtracted in 200 components = -6.12733e-05 Jy ! Clean residual min=-0.002785 max=0.002300 Jy/beam ! Clean residual mean=-0.000012 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.128933 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.128933 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=10.7 mas, bpa=5.034 degrees ! Estimated noise=928.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.93889e-05 Jy ! Component: 100 - total flux cleaned = -2.76382e-05 Jy ! Component: 150 - total flux cleaned = -2.88779e-05 Jy ! Component: 200 - total flux cleaned = -2.89718e-05 Jy ! Total flux subtracted in 200 components = -2.89718e-05 Jy ! Clean residual min=-0.002821 max=0.002282 Jy/beam ! Clean residual mean=-0.000006 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.128904 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.128904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124188Jy sigma=0.000754 ! Fit after self-cal, rms=0.124163Jy sigma=0.000754 wmodel J0608-3847_S_2014_06_09_pus_map.mod ! Writing 61 model components to file: J0608-3847_S_2014_06_09_pus_map.mod wobs J0608-3847_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0608-3847_S_2014_06_09_pus_uvs.fits wwins J0608-3847_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0608-3847_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116292 Jy ! Component: 100 - total flux cleaned = -0.00173315 Jy ! Component: 150 - total flux cleaned = -0.00197363 Jy ! Component: 200 - total flux cleaned = -0.00216168 Jy ! Component: 250 - total flux cleaned = -0.00226863 Jy ! Component: 300 - total flux cleaned = -0.00240384 Jy ! Component: 350 - total flux cleaned = -0.00253447 Jy ! Component: 400 - total flux cleaned = -0.00269226 Jy ! Component: 450 - total flux cleaned = -0.00278458 Jy ! Component: 500 - total flux cleaned = -0.0028742 Jy ! Component: 550 - total flux cleaned = -0.00287396 Jy ! Component: 600 - total flux cleaned = -0.0029017 Jy ! Component: 650 - total flux cleaned = -0.00287459 Jy ! Component: 700 - total flux cleaned = -0.00298109 Jy ! Component: 750 - total flux cleaned = -0.00298054 Jy ! Component: 800 - total flux cleaned = -0.00292971 Jy ! Component: 850 - total flux cleaned = -0.00293059 Jy ! Component: 900 - total flux cleaned = -0.00295525 Jy ! Component: 950 - total flux cleaned = -0.00285866 Jy ! Component: 1000 - total flux cleaned = -0.00281131 Jy ! Component: 1050 - total flux cleaned = -0.00271852 Jy ! Component: 1100 - total flux cleaned = -0.00269591 Jy ! Component: 1150 - total flux cleaned = -0.00265055 Jy ! Component: 1200 - total flux cleaned = -0.00260633 Jy ! Component: 1250 - total flux cleaned = -0.00256296 Jy ! Component: 1300 - total flux cleaned = -0.00249866 Jy ! Component: 1350 - total flux cleaned = -0.00239319 Jy ! Component: 1400 - total flux cleaned = -0.00231008 Jy ! Component: 1450 - total flux cleaned = -0.00220776 Jy ! Component: 1500 - total flux cleaned = -0.00210715 Jy ! Component: 1550 - total flux cleaned = -0.00200812 Jy ! Component: 1600 - total flux cleaned = -0.00190976 Jy ! Component: 1650 - total flux cleaned = -0.00181281 Jy ! Component: 1700 - total flux cleaned = -0.00173615 Jy ! Component: 1750 - total flux cleaned = -0.00167933 Jy ! Component: 1800 - total flux cleaned = -0.00160474 Jy ! Component: 1850 - total flux cleaned = -0.00158629 Jy ! Component: 1900 - total flux cleaned = -0.00154997 Jy ! Component: 1950 - total flux cleaned = -0.00149591 Jy ! Component: 2000 - total flux cleaned = -0.0014781 Jy ! Component: 2050 - total flux cleaned = -0.00147796 Jy ! Component: 2100 - total flux cleaned = -0.00139106 Jy ! Component: 2150 - total flux cleaned = -0.00139122 Jy ! Component: 2200 - total flux cleaned = -0.00135724 Jy ! Component: 2250 - total flux cleaned = -0.00135749 Jy ! Component: 2300 - total flux cleaned = -0.00137408 Jy ! Component: 2350 - total flux cleaned = -0.00139079 Jy ! Component: 2400 - total flux cleaned = -0.00140737 Jy ! Component: 2450 - total flux cleaned = -0.00142367 Jy ! Component: 2500 - total flux cleaned = -0.00142393 Jy ! Component: 2550 - total flux cleaned = -0.00145578 Jy ! Component: 2600 - total flux cleaned = -0.00145574 Jy ! Component: 2650 - total flux cleaned = -0.00147138 Jy ! Component: 2700 - total flux cleaned = -0.00145586 Jy ! Component: 2750 - total flux cleaned = -0.00144042 Jy ! Component: 2800 - total flux cleaned = -0.00147123 Jy ! Component: 2850 - total flux cleaned = -0.00144076 Jy ! Component: 2900 - total flux cleaned = -0.00144093 Jy ! Component: 2950 - total flux cleaned = -0.00144106 Jy ! Component: 3000 - total flux cleaned = -0.00142639 Jy ! Component: 3050 - total flux cleaned = -0.00144112 Jy ! Component: 3100 - total flux cleaned = -0.00139737 Jy ! Component: 3150 - total flux cleaned = -0.00142654 Jy ! Component: 3200 - total flux cleaned = -0.00141202 Jy ! Component: 3250 - total flux cleaned = -0.00139759 Jy ! Component: 3300 - total flux cleaned = -0.0013836 Jy ! Component: 3350 - total flux cleaned = -0.00141192 Jy ! Component: 3400 - total flux cleaned = -0.00142589 Jy ! Component: 3450 - total flux cleaned = -0.0013701 Jy ! Component: 3500 - total flux cleaned = -0.00138398 Jy ! Component: 3550 - total flux cleaned = -0.00139773 Jy ! Component: 3600 - total flux cleaned = -0.00139763 Jy ! Component: 3650 - total flux cleaned = -0.00135692 Jy ! Component: 3700 - total flux cleaned = -0.00132988 Jy ! Component: 3750 - total flux cleaned = -0.00132997 Jy ! Component: 3800 - total flux cleaned = -0.0013166 Jy ! Component: 3850 - total flux cleaned = -0.00129005 Jy ! Component: 3900 - total flux cleaned = -0.00129011 Jy ! Component: 3950 - total flux cleaned = -0.0013163 Jy ! Component: 4000 - total flux cleaned = -0.00123806 Jy ! Component: 4050 - total flux cleaned = -0.00127691 Jy ! Total flux subtracted in 4096 components = -0.00123821 Jy ! Clean residual min=-0.000792 max=0.000642 Jy/beam ! Clean residual mean=0.000006 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.127666 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 334 components and 0.127666 Jy ![Exited script file: muppet] wmap "J0608-3847_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 10.7 at 5.034 degrees (North through East) ! Clean map min=-0.0019057 max=0.11073 Jy/beam ! Writing clean map to FITS file: J0608-3847_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110733 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233671 device "J0608-3847_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0608-3847_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.633066 0.633066 1.26613 2.53226 5.06453 10.1291 20.2581 40.5162 81.0324 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.371 x 10.7 at 5.034 degrees (North through East) ! Clean map min=-0.0019057 max=0.11073 Jy/beam quit ! Quitting program ! Log file J0608-3847_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:45:50 2016