! Started logfile: J0608-2717_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:07:50 2017 obs J0608-2717_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0608-2717_S_2015_01_23_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974542 visibilities/baseline/integration-bin. ! Found source: J0608-2717 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 18068 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0608-2717_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930100Jy sigma=0.008363 ! Fit after self-cal, rms=0.910575Jy sigma=0.008233 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=6.395 mas, bpa=-4.712 degrees ! Estimated noise=992.341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692246 Jy ! Component: 100 - total flux cleaned = 0.0873432 Jy ! Total flux subtracted in 100 components = 0.0873432 Jy ! Clean residual min=-0.005828 max=0.009545 Jy/beam ! Clean residual mean=-0.000025 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 0.0873432 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0873432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130252Jy sigma=0.000819 ! Fit after self-cal, rms=0.130216Jy sigma=0.000819 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=7.501 mas, bpa=-5.451 degrees ! Estimated noise=648.946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161299 Jy ! Component: 100 - total flux cleaned = 0.0255315 Jy ! Component: 150 - total flux cleaned = 0.0318871 Jy ! Component: 200 - total flux cleaned = 0.0363676 Jy ! Total flux subtracted in 200 components = 0.0363676 Jy ! Clean residual min=-0.004649 max=0.006327 Jy/beam ! Clean residual mean=-0.000050 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.123711 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 70 components and 0.123711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127895Jy sigma=0.000792 ! Fit after self-cal, rms=0.127735Jy sigma=0.000790 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.03 KP 1.06 ! LA 0.90 MK 1.04 NL 1.22 OV 0.96 ! PT 0.94 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.90 HN 1.13 KP 0.99 ! LA 0.93 MK 0.98 NL 1.23 OV 0.97 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.12 KP 0.83 ! LA 0.74 MK 1.02 NL 1.16 OV 0.94 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.00* HN 1.06 KP 0.79 ! LA 0.79 MK 1.04 NL 1.02 OV 0.98 ! PT 0.96 SC 1.02 ! ! ! Fit before self-cal, rms=0.127735Jy sigma=0.000790 ! Fit after self-cal, rms=0.123841Jy sigma=0.000777 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=7.592 mas, bpa=-5.194 degrees ! Estimated noise=644.535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (38.5, -57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321033 Jy ! Component: 100 - total flux cleaned = 0.00467298 Jy ! Component: 150 - total flux cleaned = 0.00493697 Jy ! Component: 200 - total flux cleaned = 0.00494036 Jy ! Total flux subtracted in 200 components = 0.00494036 Jy ! Clean residual min=-0.003137 max=0.002422 Jy/beam ! Clean residual mean=-0.000014 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.128651 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 98 components and 0.128651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123752Jy sigma=0.000776 ! Fit after self-cal, rms=0.123920Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123920Jy sigma=0.000776 ! Fit after self-cal, rms=0.121501Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=7.588 mas, bpa=-5.117 degrees ! Estimated noise=645.339 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109898 Jy ! Component: 100 - total flux cleaned = 0.00134115 Jy ! Component: 150 - total flux cleaned = 0.00142954 Jy ! Component: 200 - total flux cleaned = 0.00148306 Jy ! Total flux subtracted in 200 components = 0.00148306 Jy ! Clean residual min=-0.002742 max=0.002110 Jy/beam ! Clean residual mean=-0.000011 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.130134 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 0.130134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121477Jy sigma=0.000774 ! Fit after self-cal, rms=0.121478Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121849 Jy ! Component: 100 - total flux cleaned = 0.000201665 Jy ! Component: 150 - total flux cleaned = 0.000251729 Jy ! Component: 200 - total flux cleaned = 0.000298435 Jy ! Total flux subtracted in 200 components = 0.000298435 Jy ! Clean residual min=-0.002657 max=0.002123 Jy/beam ! Clean residual mean=-0.000011 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.130433 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 117 components and 0.130433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121465Jy sigma=0.000774 ! Fit after self-cal, rms=0.121463Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121463Jy sigma=0.000774 ! Fit after self-cal, rms=0.113775Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.585 mas, bpa=-5.13 degrees ! Estimated noise=643.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023798 Jy ! Component: 100 - total flux cleaned = 0.000240338 Jy ! Component: 150 - total flux cleaned = 0.000217274 Jy ! Component: 200 - total flux cleaned = 0.000194363 Jy ! Total flux subtracted in 200 components = 0.000194363 Jy ! Clean residual min=-0.002470 max=0.002096 Jy/beam ! Clean residual mean=-0.000008 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.130627 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.130627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113764Jy sigma=0.000773 ! Fit after self-cal, rms=0.113747Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159994 Jy ! Component: 100 - total flux cleaned = 0.000137726 Jy ! Component: 150 - total flux cleaned = 0.000116645 Jy ! Component: 200 - total flux cleaned = 9.59528e-05 Jy ! Total flux subtracted in 200 components = 9.59528e-05 Jy ! Clean residual min=-0.002435 max=0.002097 Jy/beam ! Clean residual mean=-0.000008 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.130723 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 133 components and 0.130723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113738Jy sigma=0.000773 ! Fit after self-cal, rms=0.113735Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113735Jy sigma=0.000773 ! Fit after self-cal, rms=0.113430Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.456 mas, bmaj=18.28 mas, bpa=-0.848 degrees ! Estimated noise=835.152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634179 Jy ! Component: 100 - total flux cleaned = 0.000475853 Jy ! Component: 150 - total flux cleaned = 0.000296497 Jy ! Component: 200 - total flux cleaned = 0.0001994 Jy ! Total flux subtracted in 200 components = 0.0001994 Jy ! Clean residual min=-0.002553 max=0.002423 Jy/beam ! Clean residual mean=-0.000016 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.130922 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 141 components and 0.130922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113434Jy sigma=0.000773 ! Fit after self-cal, rms=0.113423Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155411 Jy ! Component: 100 - total flux cleaned = 0.000122126 Jy ! Component: 150 - total flux cleaned = 6.10231e-05 Jy ! Component: 200 - total flux cleaned = 1.88949e-05 Jy ! Total flux subtracted in 200 components = 1.88949e-05 Jy ! Clean residual min=-0.002554 max=0.002455 Jy/beam ! Clean residual mean=-0.000016 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.130941 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 147 components and 0.130941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113423Jy sigma=0.000773 ! Fit after self-cal, rms=0.113419Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.583 mas, bpa=-5.178 degrees ! Estimated noise=642.605 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.894 x 7.583 at -5.178 degrees (North through East) ! Clean map min=-0.0022121 max=0.08961 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.313 mas, bmaj=6.413 mas, bpa=-4.403 degrees ! Estimated noise=995.897 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0687542 Jy ! Component: 100 - total flux cleaned = 0.0873582 Jy ! Component: 150 - total flux cleaned = 0.0980293 Jy ! Component: 200 - total flux cleaned = 0.105366 Jy ! Total flux subtracted in 200 components = 0.105366 Jy ! Clean residual min=-0.004444 max=0.004566 Jy/beam ! Clean residual mean=-0.000011 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.105366 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.105366 Jy ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.583 mas, bpa=-5.178 degrees ! Estimated noise=642.605 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00801294 Jy ! Component: 100 - total flux cleaned = 0.0130354 Jy ! Component: 150 - total flux cleaned = 0.0165598 Jy ! Component: 200 - total flux cleaned = 0.0190968 Jy ! Total flux subtracted in 200 components = 0.0190968 Jy ! Clean residual min=-0.002689 max=0.002055 Jy/beam ! Clean residual mean=-0.000017 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.124463 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 92 components and 0.124463 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.456 mas, bmaj=18.28 mas, bpa=-0.848 degrees ! Estimated noise=835.152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298332 Jy ! Component: 100 - total flux cleaned = 0.00450564 Jy ! Component: 150 - total flux cleaned = 0.00532572 Jy ! Component: 200 - total flux cleaned = 0.00552801 Jy ! Total flux subtracted in 200 components = 0.00552801 Jy ! Clean residual min=-0.002628 max=0.002283 Jy/beam ! Clean residual mean=-0.000019 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.129991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167729 Jy ! Component: 100 - total flux cleaned = 0.000249261 Jy ! Component: 150 - total flux cleaned = 0.000305093 Jy ! Component: 200 - total flux cleaned = 0.000338673 Jy ! Total flux subtracted in 200 components = 0.000338673 Jy ! Clean residual min=-0.002574 max=0.002314 Jy/beam ! Clean residual mean=-0.000017 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.13033 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 116 components and 0.13033 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.583 mas, bpa=-5.178 degrees ! Estimated noise=642.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164219 Jy ! Component: 100 - total flux cleaned = -0.000200997 Jy ! Component: 150 - total flux cleaned = -0.000199229 Jy ! Component: 200 - total flux cleaned = -0.000138363 Jy ! Total flux subtracted in 200 components = -0.000138363 Jy ! Clean residual min=-0.002289 max=0.002016 Jy/beam ! Clean residual mean=-0.000008 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.130191 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 134 components and 0.130191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113427Jy sigma=0.000773 ! Fit after self-cal, rms=0.113414Jy sigma=0.000773 wmodel J0608-2717_S_2015_01_23_pus_map.mod ! Writing 134 model components to file: J0608-2717_S_2015_01_23_pus_map.mod wobs J0608-2717_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0608-2717_S_2015_01_23_pus_uvs.fits wwins J0608-2717_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0608-2717_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523205 Jy ! Component: 100 - total flux cleaned = -0.00069866 Jy ! Component: 150 - total flux cleaned = -0.000898059 Jy ! Component: 200 - total flux cleaned = -0.00124427 Jy ! Component: 250 - total flux cleaned = -0.00160792 Jy ! Component: 300 - total flux cleaned = -0.00184323 Jy ! Component: 350 - total flux cleaned = -0.0020144 Jy ! Component: 400 - total flux cleaned = -0.00220858 Jy ! Component: 450 - total flux cleaned = -0.00237122 Jy ! Component: 500 - total flux cleaned = -0.00252945 Jy ! Component: 550 - total flux cleaned = -0.00252944 Jy ! Component: 600 - total flux cleaned = -0.00265601 Jy ! Component: 650 - total flux cleaned = -0.00273005 Jy ! Component: 700 - total flux cleaned = -0.00285094 Jy ! Component: 750 - total flux cleaned = -0.00292227 Jy ! Component: 800 - total flux cleaned = -0.00299218 Jy ! Component: 850 - total flux cleaned = -0.00303772 Jy ! Component: 900 - total flux cleaned = -0.003038 Jy ! Component: 950 - total flux cleaned = -0.00312675 Jy ! Component: 1000 - total flux cleaned = -0.00317051 Jy ! Component: 1050 - total flux cleaned = -0.00325624 Jy ! Component: 1100 - total flux cleaned = -0.00334078 Jy ! Component: 1150 - total flux cleaned = -0.00338245 Jy ! Component: 1200 - total flux cleaned = -0.00340316 Jy ! Component: 1250 - total flux cleaned = -0.00346436 Jy ! Component: 1300 - total flux cleaned = -0.00354416 Jy ! Component: 1350 - total flux cleaned = -0.0036033 Jy ! Component: 1400 - total flux cleaned = -0.00364244 Jy ! Component: 1450 - total flux cleaned = -0.00368118 Jy ! Component: 1500 - total flux cleaned = -0.00379481 Jy ! Component: 1550 - total flux cleaned = -0.00379451 Jy ! Component: 1600 - total flux cleaned = -0.00381301 Jy ! Component: 1650 - total flux cleaned = -0.00388621 Jy ! Component: 1700 - total flux cleaned = -0.00394024 Jy ! Component: 1750 - total flux cleaned = -0.00388625 Jy ! Component: 1800 - total flux cleaned = -0.00388616 Jy ! Component: 1850 - total flux cleaned = -0.0039563 Jy ! Component: 1900 - total flux cleaned = -0.00395612 Jy ! Component: 1950 - total flux cleaned = -0.00393898 Jy ! Component: 2000 - total flux cleaned = -0.00397313 Jy ! Component: 2050 - total flux cleaned = -0.00397351 Jy ! Component: 2100 - total flux cleaned = -0.00402372 Jy ! Component: 2150 - total flux cleaned = -0.00404026 Jy ! Component: 2200 - total flux cleaned = -0.00407286 Jy ! Component: 2250 - total flux cleaned = -0.00408902 Jy ! Component: 2300 - total flux cleaned = -0.00407312 Jy ! Component: 2350 - total flux cleaned = -0.00418515 Jy ! Component: 2400 - total flux cleaned = -0.00420094 Jy ! Component: 2450 - total flux cleaned = -0.00427919 Jy ! Component: 2500 - total flux cleaned = -0.00426363 Jy ! Component: 2550 - total flux cleaned = -0.00430987 Jy ! Component: 2600 - total flux cleaned = -0.00430975 Jy ! Component: 2650 - total flux cleaned = -0.00430975 Jy ! Component: 2700 - total flux cleaned = -0.00437005 Jy ! Component: 2750 - total flux cleaned = -0.00438478 Jy ! Component: 2800 - total flux cleaned = -0.00439964 Jy ! Component: 2850 - total flux cleaned = -0.00438497 Jy ! Component: 2900 - total flux cleaned = -0.00445794 Jy ! Component: 2950 - total flux cleaned = -0.00445794 Jy ! Component: 3000 - total flux cleaned = -0.00454389 Jy ! Component: 3050 - total flux cleaned = -0.00457237 Jy ! Component: 3100 - total flux cleaned = -0.00464314 Jy ! Component: 3150 - total flux cleaned = -0.004657 Jy ! Component: 3200 - total flux cleaned = -0.00472682 Jy ! Component: 3250 - total flux cleaned = -0.0047405 Jy ! Component: 3300 - total flux cleaned = -0.00479529 Jy ! Component: 3350 - total flux cleaned = -0.00484977 Jy ! Component: 3400 - total flux cleaned = -0.00486337 Jy ! Component: 3450 - total flux cleaned = -0.00497081 Jy ! Component: 3500 - total flux cleaned = -0.0049975 Jy ! Component: 3550 - total flux cleaned = -0.0050505 Jy ! Component: 3600 - total flux cleaned = -0.00511642 Jy ! Component: 3650 - total flux cleaned = -0.00512953 Jy ! Component: 3700 - total flux cleaned = -0.00516849 Jy ! Component: 3750 - total flux cleaned = -0.00523308 Jy ! Component: 3800 - total flux cleaned = -0.00530998 Jy ! Component: 3850 - total flux cleaned = -0.0053227 Jy ! Component: 3900 - total flux cleaned = -0.00539865 Jy ! Component: 3950 - total flux cleaned = -0.00538599 Jy ! Component: 4000 - total flux cleaned = -0.00542343 Jy ! Component: 4050 - total flux cleaned = -0.00546066 Jy ! Total flux subtracted in 4096 components = -0.00549775 Jy ! Clean residual min=-0.000701 max=0.000898 Jy/beam ! Clean residual mean=-0.000002 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.124694 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 441 components and 0.124694 Jy ![Exited script file: muppet] wmap "J0608-2717_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.894 x 7.583 at -5.178 degrees (North through East) ! Clean map min=-0.0016847 max=0.089947 Jy/beam ! Writing clean map to FITS file: J0608-2717_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0899474 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224832 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.749879 0.749879 1.49976 2.99952 5.99903 11.9981 23.9961 47.9923 95.9845 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.894 x 7.583 at -5.178 degrees (North through East) ! Clean map min=-0.0016847 max=0.089947 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0608-2717_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:07:55 2017