! Started logfile: J0604-4225_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:45:31 2016 obs J0604-4225_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J0604-4225_S_2014_06_09_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.458974 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0604-4225 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0604-4225_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 319 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 319 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 319 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 319 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.884577Jy sigma=0.005982 ! Fit after self-cal, rms=0.814039Jy sigma=0.005504 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.081 mas, bmaj=17.3 mas, bpa=16.81 degrees ! Estimated noise=1705.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.149711 Jy ! Component: 100 - total flux cleaned = 0.185411 Jy ! Total flux subtracted in 100 components = 0.185411 Jy ! Clean residual min=-0.010607 max=0.016384 Jy/beam ! Clean residual mean=-0.000100 rms=0.003365 Jy/beam ! Combined flux in latest and established models = 0.185411 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.185411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137044Jy sigma=0.000823 ! Fit after self-cal, rms=0.137059Jy sigma=0.000823 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=19.69 mas, bpa=15.79 degrees ! Estimated noise=1150.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246794 Jy ! Component: 100 - total flux cleaned = 0.0374916 Jy ! Component: 150 - total flux cleaned = 0.0448352 Jy ! Component: 200 - total flux cleaned = 0.0492544 Jy ! Total flux subtracted in 200 components = 0.0492544 Jy ! Clean residual min=-0.010666 max=0.008352 Jy/beam ! Clean residual mean=0.000102 rms=0.002511 Jy/beam ! Combined flux in latest and established models = 0.234665 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 53 components and 0.234665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132659Jy sigma=0.000792 ! Fit after self-cal, rms=0.132736Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.80 HN 1.00* KP 1.06 ! LA 1.21 MK 1.00* NL 1.22 OV 0.94 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.00 ! LA 1.14 MK 1.00* NL 1.30 OV 0.97 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.91 ! LA 0.92 MK 1.00* NL 1.23 OV 0.90 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.00* KP 0.88 ! LA 0.89 MK 1.00* NL 1.34 OV 0.95 ! PT 1.04 SC 1.03 ! ! ! Fit before self-cal, rms=0.132736Jy sigma=0.000791 ! Fit after self-cal, rms=0.140231Jy sigma=0.000767 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.892 mas, bmaj=20.33 mas, bpa=15.87 degrees ! Estimated noise=1170.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171116 Jy ! Component: 100 - total flux cleaned = -0.00184391 Jy ! Component: 150 - total flux cleaned = -0.00195582 Jy ! Component: 200 - total flux cleaned = -0.0020596 Jy ! Total flux subtracted in 200 components = -0.0020596 Jy ! Clean residual min=-0.005609 max=0.004884 Jy/beam ! Clean residual mean=0.000021 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.232605 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.232605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139957Jy sigma=0.000765 ! Fit after self-cal, rms=0.140111Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140111Jy sigma=0.000765 ! Fit after self-cal, rms=0.142471Jy sigma=0.000762 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.907 mas, bmaj=20.37 mas, bpa=15.82 degrees ! Estimated noise=1176.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123711 Jy ! Component: 100 - total flux cleaned = -0.0016988 Jy ! Component: 150 - total flux cleaned = -0.00185471 Jy ! Component: 200 - total flux cleaned = -0.00205914 Jy ! Total flux subtracted in 200 components = -0.00205914 Jy ! Clean residual min=-0.003953 max=0.003499 Jy/beam ! Clean residual mean=0.000013 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.230546 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 0.230546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142345Jy sigma=0.000761 ! Fit after self-cal, rms=0.142338Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000197745 Jy ! Component: 100 - total flux cleaned = -0.000308503 Jy ! Component: 150 - total flux cleaned = -0.000359512 Jy ! Component: 200 - total flux cleaned = -0.000405321 Jy ! Total flux subtracted in 200 components = -0.000405321 Jy ! Clean residual min=-0.004045 max=0.003498 Jy/beam ! Clean residual mean=0.000010 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.230141 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 0.230141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142296Jy sigma=0.000761 ! Fit after self-cal, rms=0.142281Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142281Jy sigma=0.000761 ! Fit after self-cal, rms=0.144339Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=20.42 mas, bpa=15.81 degrees ! Estimated noise=1174.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00168271 Jy ! Component: 100 - total flux cleaned = -0.0019788 Jy ! Component: 150 - total flux cleaned = -0.00214714 Jy ! Component: 200 - total flux cleaned = -0.00229503 Jy ! Total flux subtracted in 200 components = -0.00229503 Jy ! Clean residual min=-0.003429 max=0.003316 Jy/beam ! Clean residual mean=0.000003 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.227846 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 0.227846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144288Jy sigma=0.000760 ! Fit after self-cal, rms=0.144287Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000154419 Jy ! Component: 100 - total flux cleaned = -0.000245194 Jy ! Component: 150 - total flux cleaned = -0.00029986 Jy ! Component: 200 - total flux cleaned = -0.000299345 Jy ! Total flux subtracted in 200 components = -0.000299345 Jy ! Clean residual min=-0.003460 max=0.003337 Jy/beam ! Clean residual mean=0.000000 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.227547 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.227547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144272Jy sigma=0.000760 ! Fit after self-cal, rms=0.144264Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144264Jy sigma=0.000760 ! Fit after self-cal, rms=0.145809Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.93 mas, bmaj=38.89 mas, bpa=2.22 degrees ! Estimated noise=1299.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117059 Jy ! Component: 100 - total flux cleaned = -0.00138847 Jy ! Component: 150 - total flux cleaned = -0.00146693 Jy ! Component: 200 - total flux cleaned = -0.0015202 Jy ! Total flux subtracted in 200 components = -0.0015202 Jy ! Clean residual min=-0.003082 max=0.003432 Jy/beam ! Clean residual mean=0.000006 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.226026 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 107 components and 0.226026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145789Jy sigma=0.000760 ! Fit after self-cal, rms=0.145804Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.72403e-05 Jy ! Component: 100 - total flux cleaned = -7.78527e-05 Jy ! Component: 150 - total flux cleaned = -0.000122039 Jy ! Component: 200 - total flux cleaned = -0.00016313 Jy ! Total flux subtracted in 200 components = -0.00016313 Jy ! Clean residual min=-0.003064 max=0.003465 Jy/beam ! Clean residual mean=0.000004 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.225863 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 110 components and 0.225863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145797Jy sigma=0.000760 ! Fit after self-cal, rms=0.145791Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=20.49 mas, bpa=15.81 degrees ! Estimated noise=1174.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.92 x 20.49 at 15.81 degrees (North through East) ! Clean map min=-0.0033797 max=0.18168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.054 mas, bmaj=17.79 mas, bpa=16.76 degrees ! Estimated noise=1775.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155483 Jy ! Component: 100 - total flux cleaned = 0.190271 Jy ! Component: 150 - total flux cleaned = 0.202812 Jy ! Component: 200 - total flux cleaned = 0.209597 Jy ! Total flux subtracted in 200 components = 0.209597 Jy ! Clean residual min=-0.005598 max=0.005280 Jy/beam ! Clean residual mean=-0.000103 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.209597 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.209597 Jy ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=20.49 mas, bpa=15.81 degrees ! Estimated noise=1174.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719977 Jy ! Component: 100 - total flux cleaned = 0.0110904 Jy ! Component: 150 - total flux cleaned = 0.0131724 Jy ! Component: 200 - total flux cleaned = 0.0138785 Jy ! Total flux subtracted in 200 components = 0.0138785 Jy ! Clean residual min=-0.003469 max=0.003353 Jy/beam ! Clean residual mean=-0.000012 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.223475 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 94 components and 0.223475 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.93 mas, bmaj=38.89 mas, bpa=2.22 degrees ! Estimated noise=1299.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140434 Jy ! Component: 100 - total flux cleaned = 0.00198236 Jy ! Component: 150 - total flux cleaned = 0.00219558 Jy ! Component: 200 - total flux cleaned = 0.00225516 Jy ! Total flux subtracted in 200 components = 0.00225516 Jy ! Clean residual min=-0.002989 max=0.003767 Jy/beam ! Clean residual mean=0.000003 rms=0.001003 Jy/beam ! Combined flux in latest and established models = 0.22573 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.68912e-05 Jy ! Component: 100 - total flux cleaned = 0.000126719 Jy ! Component: 150 - total flux cleaned = 0.000175073 Jy ! Component: 200 - total flux cleaned = 0.000206358 Jy ! Total flux subtracted in 200 components = 0.000206358 Jy ! Clean residual min=-0.002985 max=0.003765 Jy/beam ! Clean residual mean=0.000005 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 0.225937 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 131 components and 0.225937 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.92 mas, bmaj=20.49 mas, bpa=15.81 degrees ! Estimated noise=1174.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000324901 Jy ! Component: 100 - total flux cleaned = -0.00023677 Jy ! Component: 150 - total flux cleaned = -0.000210888 Jy ! Component: 200 - total flux cleaned = -0.000185639 Jy ! Total flux subtracted in 200 components = -0.000185639 Jy ! Clean residual min=-0.003439 max=0.003333 Jy/beam ! Clean residual mean=0.000003 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.225751 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 146 components and 0.225751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145697Jy sigma=0.000760 ! Fit after self-cal, rms=0.145614Jy sigma=0.000760 wmodel J0604-4225_S_2014_06_09_pus_map.mod ! Writing 146 model components to file: J0604-4225_S_2014_06_09_pus_map.mod wobs J0604-4225_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J0604-4225_S_2014_06_09_pus_uvs.fits wwins J0604-4225_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J0604-4225_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000495297 Jy ! Component: 100 - total flux cleaned = -0.00115896 Jy ! Component: 150 - total flux cleaned = -0.00194936 Jy ! Component: 200 - total flux cleaned = -0.00251826 Jy ! Component: 250 - total flux cleaned = -0.0029328 Jy ! Component: 300 - total flux cleaned = -0.00340891 Jy ! Component: 350 - total flux cleaned = -0.00371504 Jy ! Component: 400 - total flux cleaned = -0.00397481 Jy ! Component: 450 - total flux cleaned = -0.00419006 Jy ! Component: 500 - total flux cleaned = -0.00432899 Jy ! Component: 550 - total flux cleaned = -0.00449824 Jy ! Component: 600 - total flux cleaned = -0.00466233 Jy ! Component: 650 - total flux cleaned = -0.0046952 Jy ! Component: 700 - total flux cleaned = -0.00475876 Jy ! Component: 750 - total flux cleaned = -0.00491215 Jy ! Component: 800 - total flux cleaned = -0.00503148 Jy ! Component: 850 - total flux cleaned = -0.00506084 Jy ! Component: 900 - total flux cleaned = -0.00511846 Jy ! Component: 950 - total flux cleaned = -0.00517516 Jy ! Component: 1000 - total flux cleaned = -0.00525761 Jy ! Component: 1050 - total flux cleaned = -0.00525747 Jy ! Component: 1100 - total flux cleaned = -0.00525827 Jy ! Component: 1150 - total flux cleaned = -0.00523266 Jy ! Component: 1200 - total flux cleaned = -0.00520694 Jy ! Component: 1250 - total flux cleaned = -0.00520694 Jy ! Component: 1300 - total flux cleaned = -0.00523121 Jy ! Component: 1350 - total flux cleaned = -0.00518271 Jy ! Component: 1400 - total flux cleaned = -0.00525439 Jy ! Component: 1450 - total flux cleaned = -0.00527794 Jy ! Component: 1500 - total flux cleaned = -0.00532441 Jy ! Component: 1550 - total flux cleaned = -0.00536973 Jy ! Component: 1600 - total flux cleaned = -0.00545848 Jy ! Component: 1650 - total flux cleaned = -0.00550182 Jy ! Component: 1700 - total flux cleaned = -0.00552331 Jy ! Component: 1750 - total flux cleaned = -0.00562985 Jy ! Component: 1800 - total flux cleaned = -0.00573464 Jy ! Component: 1850 - total flux cleaned = -0.00577582 Jy ! Component: 1900 - total flux cleaned = -0.00585788 Jy ! Component: 1950 - total flux cleaned = -0.00593909 Jy ! Component: 2000 - total flux cleaned = -0.00609925 Jy ! Component: 2050 - total flux cleaned = -0.00623743 Jy ! Component: 2100 - total flux cleaned = -0.00629623 Jy ! Component: 2150 - total flux cleaned = -0.00643193 Jy ! Component: 2200 - total flux cleaned = -0.00658489 Jy ! Component: 2250 - total flux cleaned = -0.00671715 Jy ! Component: 2300 - total flux cleaned = -0.00682906 Jy ! Component: 2350 - total flux cleaned = -0.00693984 Jy ! Component: 2400 - total flux cleaned = -0.00703131 Jy ! Component: 2450 - total flux cleaned = -0.00714003 Jy ! Component: 2500 - total flux cleaned = -0.00724754 Jy ! Component: 2550 - total flux cleaned = -0.00733636 Jy ! Component: 2600 - total flux cleaned = -0.00744194 Jy ! Component: 2650 - total flux cleaned = -0.00747684 Jy ! Component: 2700 - total flux cleaned = -0.00758054 Jy ! Component: 2750 - total flux cleaned = -0.00764888 Jy ! Component: 2800 - total flux cleaned = -0.00773352 Jy ! Component: 2850 - total flux cleaned = -0.00783432 Jy ! Component: 2900 - total flux cleaned = -0.00786754 Jy ! Component: 2950 - total flux cleaned = -0.00791719 Jy ! Component: 3000 - total flux cleaned = -0.00796636 Jy ! Component: 3050 - total flux cleaned = -0.00803138 Jy ! Component: 3100 - total flux cleaned = -0.00809581 Jy ! Component: 3150 - total flux cleaned = -0.00811176 Jy ! Component: 3200 - total flux cleaned = -0.00814359 Jy ! Component: 3250 - total flux cleaned = -0.00819115 Jy ! Component: 3300 - total flux cleaned = -0.00823817 Jy ! Component: 3350 - total flux cleaned = -0.00822262 Jy ! Component: 3400 - total flux cleaned = -0.00825353 Jy ! Component: 3450 - total flux cleaned = -0.00822278 Jy ! Component: 3500 - total flux cleaned = -0.0082687 Jy ! Component: 3550 - total flux cleaned = -0.00826875 Jy ! Component: 3600 - total flux cleaned = -0.00828401 Jy ! Component: 3650 - total flux cleaned = -0.00829913 Jy ! Component: 3700 - total flux cleaned = -0.00831415 Jy ! Component: 3750 - total flux cleaned = -0.00832907 Jy ! Component: 3800 - total flux cleaned = -0.008329 Jy ! Component: 3850 - total flux cleaned = -0.00831414 Jy ! Component: 3900 - total flux cleaned = -0.00831413 Jy ! Component: 3950 - total flux cleaned = -0.00829934 Jy ! Component: 4000 - total flux cleaned = -0.00832891 Jy ! Component: 4050 - total flux cleaned = -0.00832888 Jy ! Total flux subtracted in 4096 components = -0.00834356 Jy ! Clean residual min=-0.000804 max=0.000803 Jy/beam ! Clean residual mean=0.000003 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.217408 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 403 components and 0.217408 Jy ![Exited script file: muppet] wmap "J0604-4225_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.92 x 20.49 at 15.81 degrees (North through East) ! Clean map min=-0.0029374 max=0.18999 Jy/beam ! Writing clean map to FITS file: J0604-4225_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.189989 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00028519 device "J0604-4225_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0604-4225_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.450326 0.450326 0.900652 1.8013 3.60261 7.20522 14.4104 28.8209 57.6417 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.189 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.92 x 20.49 at 15.81 degrees (North through East) ! Clean map min=-0.0029374 max=0.18999 Jy/beam quit ! Quitting program ! Log file J0604-4225_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:45:36 2016