! Started logfile: J0558+3418_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:07:23 2017 obs J0558+3418_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0558+3418_S_2015_01_23_pus_uva.fits ! AN table 1: 74 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.94985 visibilities/baseline/integration-bin. ! Found source: J0558+3418 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 12652 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0558+3418_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.909244Jy sigma=0.010153 ! Fit after self-cal, rms=0.884739Jy sigma=0.010071 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=4.812 mas, bpa=-6.297 degrees ! Estimated noise=899.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105715 Jy ! Component: 100 - total flux cleaned = 0.129056 Jy ! Total flux subtracted in 100 components = 0.129056 Jy ! Clean residual min=-0.004991 max=0.007665 Jy/beam ! Clean residual mean=0.000016 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.129056 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.129056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230920Jy sigma=0.000834 ! Fit after self-cal, rms=0.230897Jy sigma=0.000834 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=5.645 mas, bpa=-4.879 degrees ! Estimated noise=590.042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860275 Jy ! Component: 100 - total flux cleaned = 0.0123729 Jy ! Component: 150 - total flux cleaned = 0.0142951 Jy ! Component: 200 - total flux cleaned = 0.0154383 Jy ! Total flux subtracted in 200 components = 0.0154383 Jy ! Clean residual min=-0.005304 max=0.005264 Jy/beam ! Clean residual mean=0.000019 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.144495 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 33 components and 0.144495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.230200Jy sigma=0.000828 ! Fit after self-cal, rms=0.230190Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.95 KP 1.10 ! LA 0.99 MK 1.00 NL 1.06 OV 1.00 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.06 HN 1.02 KP 1.02 ! LA 0.95 MK 1.00 NL 1.20 OV 1.00 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.30 HN 0.99 KP 0.86 ! LA 0.79 MK 1.05 NL 1.61 OV 0.93 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.35 HN 0.97 KP 0.84 ! LA 0.81 MK 1.01 NL 1.04 OV 0.92 ! PT 1.02 SC 0.98 ! ! ! Fit before self-cal, rms=0.230190Jy sigma=0.000828 ! Fit after self-cal, rms=0.258009Jy sigma=0.000788 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=5.663 mas, bpa=-4.463 degrees ! Estimated noise=593.147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746827 Jy ! Component: 100 - total flux cleaned = 0.000768513 Jy ! Component: 150 - total flux cleaned = 0.000769806 Jy ! Component: 200 - total flux cleaned = 0.000786009 Jy ! Total flux subtracted in 200 components = 0.000786009 Jy ! Clean residual min=-0.002617 max=0.002860 Jy/beam ! Clean residual mean=0.000008 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.145281 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.145281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257967Jy sigma=0.000788 ! Fit after self-cal, rms=0.258022Jy sigma=0.000788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258022Jy sigma=0.000788 ! Fit after self-cal, rms=0.164347Jy sigma=0.000783 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=5.675 mas, bpa=-4.829 degrees ! Estimated noise=593.163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392561 Jy ! Component: 100 - total flux cleaned = -0.000481773 Jy ! Component: 150 - total flux cleaned = -0.000481942 Jy ! Component: 200 - total flux cleaned = -0.000481618 Jy ! Total flux subtracted in 200 components = -0.000481618 Jy ! Clean residual min=-0.001825 max=0.001891 Jy/beam ! Clean residual mean=0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.144799 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.144799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164339Jy sigma=0.000783 ! Fit after self-cal, rms=0.164305Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.70773e-05 Jy ! Component: 100 - total flux cleaned = 4.56267e-05 Jy ! Component: 150 - total flux cleaned = 3.66794e-05 Jy ! Component: 200 - total flux cleaned = 1.16753e-05 Jy ! Total flux subtracted in 200 components = 1.16753e-05 Jy ! Clean residual min=-0.001820 max=0.001893 Jy/beam ! Clean residual mean=0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.144811 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.144811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164301Jy sigma=0.000783 ! Fit after self-cal, rms=0.164305Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164305Jy sigma=0.000783 ! Fit after self-cal, rms=0.163941Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=5.683 mas, bpa=-5.15 degrees ! Estimated noise=593.383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292394 Jy ! Component: 100 - total flux cleaned = -0.000355381 Jy ! Component: 150 - total flux cleaned = -0.000404573 Jy ! Component: 200 - total flux cleaned = -0.000444375 Jy ! Total flux subtracted in 200 components = -0.000444375 Jy ! Clean residual min=-0.001831 max=0.001872 Jy/beam ! Clean residual mean=0.000001 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.144367 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.144367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163936Jy sigma=0.000783 ! Fit after self-cal, rms=0.163942Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.49656e-05 Jy ! Component: 100 - total flux cleaned = -1.05375e-05 Jy ! Component: 150 - total flux cleaned = -2.61061e-05 Jy ! Component: 200 - total flux cleaned = -4.06659e-05 Jy ! Total flux subtracted in 200 components = -4.06659e-05 Jy ! Clean residual min=-0.001821 max=0.001872 Jy/beam ! Clean residual mean=0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.144326 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.144326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163938Jy sigma=0.000783 ! Fit after self-cal, rms=0.163940Jy sigma=0.000783 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163940Jy sigma=0.000783 ! Fit after self-cal, rms=0.163910Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.302 mas, bmaj=9.357 mas, bpa=-3.957 degrees ! Estimated noise=755.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000337162 Jy ! Component: 100 - total flux cleaned = -0.000313866 Jy ! Component: 150 - total flux cleaned = -0.000306785 Jy ! Component: 200 - total flux cleaned = -0.000306484 Jy ! Total flux subtracted in 200 components = -0.000306484 Jy ! Clean residual min=-0.002020 max=0.002221 Jy/beam ! Clean residual mean=0.000003 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.144019 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 66 components and 0.144019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163909Jy sigma=0.000783 ! Fit after self-cal, rms=0.163910Jy sigma=0.000783 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.91943e-05 Jy ! Component: 100 - total flux cleaned = -1.95918e-05 Jy ! Component: 150 - total flux cleaned = -7.00203e-06 Jy ! Component: 200 - total flux cleaned = 8.11086e-07 Jy ! Total flux subtracted in 200 components = 8.11086e-07 Jy ! Clean residual min=-0.002024 max=0.002207 Jy/beam ! Clean residual mean=0.000003 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.14402 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.14402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163911Jy sigma=0.000783 ! Fit after self-cal, rms=0.163911Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=5.689 mas, bpa=-5.391 degrees ! Estimated noise=593.687 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.668 x 5.689 at -5.391 degrees (North through East) ! Clean map min=-0.0017899 max=0.13726 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.015 mas, bmaj=4.847 mas, bpa=-6.812 degrees ! Estimated noise=906.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106515 Jy ! Component: 100 - total flux cleaned = 0.129821 Jy ! Component: 150 - total flux cleaned = 0.1364 Jy ! Component: 200 - total flux cleaned = 0.13961 Jy ! Total flux subtracted in 200 components = 0.13961 Jy ! Clean residual min=-0.002524 max=0.002635 Jy/beam ! Clean residual mean=0.000003 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.13961 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.13961 Jy ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=5.689 mas, bpa=-5.391 degrees ! Estimated noise=593.687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225503 Jy ! Component: 100 - total flux cleaned = 0.00328761 Jy ! Component: 150 - total flux cleaned = 0.00364475 Jy ! Component: 200 - total flux cleaned = 0.0037992 Jy ! Total flux subtracted in 200 components = 0.0037992 Jy ! Clean residual min=-0.001846 max=0.001861 Jy/beam ! Clean residual mean=0.000002 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.143409 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.143409 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.302 mas, bmaj=9.357 mas, bpa=-3.957 degrees ! Estimated noise=755.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000498087 Jy ! Component: 100 - total flux cleaned = 0.000546182 Jy ! Component: 150 - total flux cleaned = 0.000557267 Jy ! Component: 200 - total flux cleaned = 0.000567716 Jy ! Total flux subtracted in 200 components = 0.000567716 Jy ! Clean residual min=-0.002037 max=0.002213 Jy/beam ! Clean residual mean=0.000003 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.143977 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41322e-05 Jy ! Component: 100 - total flux cleaned = 2.31514e-05 Jy ! Component: 150 - total flux cleaned = 2.73585e-05 Jy ! Component: 200 - total flux cleaned = 2.73427e-05 Jy ! Total flux subtracted in 200 components = 2.73427e-05 Jy ! Clean residual min=-0.002036 max=0.002214 Jy/beam ! Clean residual mean=0.000003 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.144004 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.144004 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.668 mas, bmaj=5.689 mas, bpa=-5.391 degrees ! Estimated noise=593.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000266692 Jy ! Component: 100 - total flux cleaned = -0.000280642 Jy ! Component: 150 - total flux cleaned = -0.000291176 Jy ! Component: 200 - total flux cleaned = -0.000282038 Jy ! Total flux subtracted in 200 components = -0.000282038 Jy ! Clean residual min=-0.001848 max=0.001875 Jy/beam ! Clean residual mean=0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.143722 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.143722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163909Jy sigma=0.000783 ! Fit after self-cal, rms=0.163912Jy sigma=0.000783 wmodel J0558+3418_S_2015_01_23_pus_map.mod ! Writing 49 model components to file: J0558+3418_S_2015_01_23_pus_map.mod wobs J0558+3418_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0558+3418_S_2015_01_23_pus_uvs.fits wwins J0558+3418_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0558+3418_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234842 Jy ! Component: 100 - total flux cleaned = 0.000421666 Jy ! Component: 150 - total flux cleaned = 0.000568098 Jy ! Component: 200 - total flux cleaned = 0.000765906 Jy ! Component: 250 - total flux cleaned = 0.000985829 Jy ! Component: 300 - total flux cleaned = 0.00119938 Jy ! Component: 350 - total flux cleaned = 0.00145812 Jy ! Component: 400 - total flux cleaned = 0.00163523 Jy ! Component: 450 - total flux cleaned = 0.00180788 Jy ! Component: 500 - total flux cleaned = 0.00200067 Jy ! Component: 550 - total flux cleaned = 0.00221265 Jy ! Component: 600 - total flux cleaned = 0.00232823 Jy ! Component: 650 - total flux cleaned = 0.00250961 Jy ! Component: 700 - total flux cleaned = 0.00257579 Jy ! Component: 750 - total flux cleaned = 0.00261985 Jy ! Component: 800 - total flux cleaned = 0.00277073 Jy ! Component: 850 - total flux cleaned = 0.00285524 Jy ! Component: 900 - total flux cleaned = 0.00289677 Jy ! Component: 950 - total flux cleaned = 0.00289685 Jy ! Component: 1000 - total flux cleaned = 0.00287664 Jy ! Component: 1050 - total flux cleaned = 0.00283705 Jy ! Component: 1100 - total flux cleaned = 0.00283694 Jy ! Component: 1150 - total flux cleaned = 0.00279768 Jy ! Component: 1200 - total flux cleaned = 0.00275874 Jy ! Component: 1250 - total flux cleaned = 0.00272066 Jy ! Component: 1300 - total flux cleaned = 0.00266413 Jy ! Component: 1350 - total flux cleaned = 0.00264545 Jy ! Component: 1400 - total flux cleaned = 0.00259028 Jy ! Component: 1450 - total flux cleaned = 0.00251769 Jy ! Component: 1500 - total flux cleaned = 0.00251741 Jy ! Component: 1550 - total flux cleaned = 0.00241083 Jy ! Component: 1600 - total flux cleaned = 0.00235825 Jy ! Component: 1650 - total flux cleaned = 0.00232357 Jy ! Component: 1700 - total flux cleaned = 0.00227195 Jy ! Component: 1750 - total flux cleaned = 0.00227187 Jy ! Component: 1800 - total flux cleaned = 0.00222119 Jy ! Component: 1850 - total flux cleaned = 0.00215412 Jy ! Component: 1900 - total flux cleaned = 0.00217075 Jy ! Component: 1950 - total flux cleaned = 0.00212106 Jy ! Component: 2000 - total flux cleaned = 0.00205562 Jy ! Component: 2050 - total flux cleaned = 0.00205574 Jy ! Component: 2100 - total flux cleaned = 0.00197571 Jy ! Component: 2150 - total flux cleaned = 0.00199153 Jy ! Component: 2200 - total flux cleaned = 0.00196003 Jy ! Component: 2250 - total flux cleaned = 0.00199115 Jy ! Component: 2300 - total flux cleaned = 0.00199123 Jy ! Component: 2350 - total flux cleaned = 0.00202184 Jy ! Component: 2400 - total flux cleaned = 0.00199142 Jy ! Component: 2450 - total flux cleaned = 0.00206717 Jy ! Component: 2500 - total flux cleaned = 0.00208197 Jy ! Component: 2550 - total flux cleaned = 0.00212645 Jy ! Component: 2600 - total flux cleaned = 0.00209706 Jy ! Component: 2650 - total flux cleaned = 0.00215568 Jy ! Component: 2700 - total flux cleaned = 0.00212648 Jy ! Component: 2750 - total flux cleaned = 0.00216987 Jy ! Component: 2800 - total flux cleaned = 0.00216989 Jy ! Component: 2850 - total flux cleaned = 0.00222693 Jy ! Component: 2900 - total flux cleaned = 0.00228357 Jy ! Component: 2950 - total flux cleaned = 0.00228343 Jy ! Component: 3000 - total flux cleaned = 0.00231135 Jy ! Component: 3050 - total flux cleaned = 0.0022974 Jy ! Component: 3100 - total flux cleaned = 0.00235248 Jy ! Component: 3150 - total flux cleaned = 0.00240744 Jy ! Component: 3200 - total flux cleaned = 0.0024074 Jy ! Component: 3250 - total flux cleaned = 0.00240725 Jy ! Component: 3300 - total flux cleaned = 0.00239382 Jy ! Component: 3350 - total flux cleaned = 0.00240722 Jy ! Component: 3400 - total flux cleaned = 0.0024073 Jy ! Component: 3450 - total flux cleaned = 0.00242061 Jy ! Component: 3500 - total flux cleaned = 0.00247328 Jy ! Component: 3550 - total flux cleaned = 0.00247344 Jy ! Component: 3600 - total flux cleaned = 0.00251234 Jy ! Component: 3650 - total flux cleaned = 0.00246075 Jy ! Component: 3700 - total flux cleaned = 0.00251212 Jy ! Component: 3750 - total flux cleaned = 0.00253757 Jy ! Component: 3800 - total flux cleaned = 0.0024867 Jy ! Component: 3850 - total flux cleaned = 0.00249934 Jy ! Component: 3900 - total flux cleaned = 0.00249932 Jy ! Component: 3950 - total flux cleaned = 0.00251197 Jy ! Component: 4000 - total flux cleaned = 0.00257405 Jy ! Component: 4050 - total flux cleaned = 0.00256168 Jy ! Total flux subtracted in 4096 components = 0.00258633 Jy ! Clean residual min=-0.000666 max=0.000791 Jy/beam ! Clean residual mean=-0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.146308 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 355 components and 0.146308 Jy ![Exited script file: muppet] wmap "J0558+3418_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.668 x 5.689 at -5.391 degrees (North through East) ! Clean map min=-0.0012883 max=0.13746 Jy/beam ! Writing clean map to FITS file: J0558+3418_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.137459 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234119 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.510959 0.510959 1.02192 2.04383 4.08767 8.17534 16.3507 32.7013 65.4027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.137 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.668 x 5.689 at -5.391 degrees (North through East) ! Clean map min=-0.0012883 max=0.13746 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0558+3418_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:07:28 2017