! Started logfile: J0541+4729_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:18:08 2017 obs J0541+4729_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0541+4729_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J0541+4729 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0541+4729_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.754857Jy sigma=0.011246 ! Fit after self-cal, rms=0.731826Jy sigma=0.010870 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=4.167 mas, bpa=-85 degrees ! Estimated noise=1136.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211198 Jy ! Component: 100 - total flux cleaned = 0.286787 Jy ! Total flux subtracted in 100 components = 0.286787 Jy ! Clean residual min=-0.019183 max=0.033268 Jy/beam ! Clean residual mean=0.000005 rms=0.006177 Jy/beam ! Combined flux in latest and established models = 0.286787 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.286787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106103Jy sigma=0.001325 ! Fit after self-cal, rms=0.105546Jy sigma=0.001323 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.168 mas, bmaj=4.873 mas, bpa=-89.88 degrees ! Estimated noise=639.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395092 Jy ! Component: 100 - total flux cleaned = 0.0600666 Jy ! Component: 150 - total flux cleaned = 0.0726418 Jy ! Component: 200 - total flux cleaned = 0.0809709 Jy ! Total flux subtracted in 200 components = 0.0809709 Jy ! Clean residual min=-0.011940 max=0.017949 Jy/beam ! Clean residual mean=0.000008 rms=0.003623 Jy/beam ! Combined flux in latest and established models = 0.367758 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.367758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087976Jy sigma=0.001106 ! Fit after self-cal, rms=0.087526Jy sigma=0.001105 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 1.00 ! MK 1.08 NL 0.93 OV 0.94 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* KP 1.00* LA 0.97 ! MK 1.09 NL 1.00 OV 0.98 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.80 ! MK 1.12 NL 0.97 OV 0.90 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 1.00* KP 1.00* LA 0.86 ! MK 1.09 NL 1.05 OV 0.96 PT 0.99 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.087526Jy sigma=0.001105 ! Fit after self-cal, rms=0.078559Jy sigma=0.000965 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.262 mas, bmaj=4.949 mas, bpa=86.84 degrees ! Estimated noise=646.795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141719 Jy ! Component: 100 - total flux cleaned = 0.0208959 Jy ! Component: 150 - total flux cleaned = 0.0253731 Jy ! Component: 200 - total flux cleaned = 0.0273244 Jy ! Total flux subtracted in 200 components = 0.0273244 Jy ! Clean residual min=-0.006850 max=0.006302 Jy/beam ! Clean residual mean=0.000004 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.395082 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 0.395082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076058Jy sigma=0.000923 ! Fit after self-cal, rms=0.075714Jy sigma=0.000921 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075714Jy sigma=0.000921 ! Fit after self-cal, rms=0.075459Jy sigma=0.000916 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.226 mas, bmaj=4.918 mas, bpa=-89.97 degrees ! Estimated noise=642.749 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314236 Jy ! Component: 100 - total flux cleaned = 0.00439782 Jy ! Component: 150 - total flux cleaned = 0.0048771 Jy ! Component: 200 - total flux cleaned = 0.00493583 Jy ! Total flux subtracted in 200 components = 0.00493583 Jy ! Clean residual min=-0.006398 max=0.005305 Jy/beam ! Clean residual mean=0.000004 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.400018 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.400018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075188Jy sigma=0.000914 ! Fit after self-cal, rms=0.075180Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176288 Jy ! Component: 100 - total flux cleaned = 0.000344542 Jy ! Component: 150 - total flux cleaned = 0.000449679 Jy ! Component: 200 - total flux cleaned = 0.000449705 Jy ! Total flux subtracted in 200 components = 0.000449705 Jy ! Clean residual min=-0.006154 max=0.005122 Jy/beam ! Clean residual mean=0.000005 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.400468 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 88 components and 0.400468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075053Jy sigma=0.000913 ! Fit after self-cal, rms=0.075052Jy sigma=0.000912 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075052Jy sigma=0.000912 ! Fit after self-cal, rms=0.074670Jy sigma=0.000912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.223 mas, bmaj=4.912 mas, bpa=89.43 degrees ! Estimated noise=642.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742843 Jy ! Component: 100 - total flux cleaned = 0.0012345 Jy ! Component: 150 - total flux cleaned = 0.00147545 Jy ! Component: 200 - total flux cleaned = 0.00165709 Jy ! Total flux subtracted in 200 components = 0.00165709 Jy ! Clean residual min=-0.006040 max=0.005081 Jy/beam ! Clean residual mean=-0.000001 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.402125 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 0.402125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074547Jy sigma=0.000911 ! Fit after self-cal, rms=0.074540Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110504 Jy ! Component: 100 - total flux cleaned = 0.000113252 Jy ! Component: 150 - total flux cleaned = 0.00019469 Jy ! Component: 200 - total flux cleaned = 0.000234439 Jy ! Total flux subtracted in 200 components = 0.000234439 Jy ! Clean residual min=-0.005892 max=0.004874 Jy/beam ! Clean residual mean=-0.000001 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.402359 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.40236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074460Jy sigma=0.000911 ! Fit after self-cal, rms=0.074462Jy sigma=0.000911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074462Jy sigma=0.000911 ! Fit after self-cal, rms=0.074311Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=8.917 mas, bpa=65.9 degrees ! Estimated noise=724.814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104993 Jy ! Component: 100 - total flux cleaned = -0.000708237 Jy ! Component: 150 - total flux cleaned = -0.000421316 Jy ! Component: 200 - total flux cleaned = -0.000179122 Jy ! Total flux subtracted in 200 components = -0.000179122 Jy ! Clean residual min=-0.006609 max=0.004889 Jy/beam ! Clean residual mean=-0.000002 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.40218 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 107 components and 0.40218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074281Jy sigma=0.000911 ! Fit after self-cal, rms=0.074279Jy sigma=0.000910 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125056 Jy ! Component: 100 - total flux cleaned = -4.46163e-05 Jy ! Component: 150 - total flux cleaned = 5.07256e-05 Jy ! Component: 200 - total flux cleaned = 0.000184738 Jy ! Total flux subtracted in 200 components = 0.000184738 Jy ! Clean residual min=-0.006512 max=0.004787 Jy/beam ! Clean residual mean=-0.000002 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.402365 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.402365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074265Jy sigma=0.000910 ! Fit after self-cal, rms=0.074264Jy sigma=0.000910 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.221 mas, bmaj=4.91 mas, bpa=88.95 degrees ! Estimated noise=641.956 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.221 x 4.91 at 88.95 degrees (North through East) ! Clean map min=-0.0058387 max=0.23786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.58 mas, bmaj=4.185 mas, bpa=-85.97 degrees ! Estimated noise=1140.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.211725 Jy ! Component: 100 - total flux cleaned = 0.284669 Jy ! Component: 150 - total flux cleaned = 0.319206 Jy ! Component: 200 - total flux cleaned = 0.340126 Jy ! Total flux subtracted in 200 components = 0.340126 Jy ! Clean residual min=-0.009295 max=0.011255 Jy/beam ! Clean residual mean=0.000002 rms=0.002764 Jy/beam ! Combined flux in latest and established models = 0.340126 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.340126 Jy ! Inverting map and beam ! Estimated beam: bmin=4.221 mas, bmaj=4.91 mas, bpa=88.95 degrees ! Estimated noise=641.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015466 Jy ! Component: 100 - total flux cleaned = 0.0255336 Jy ! Component: 150 - total flux cleaned = 0.0328894 Jy ! Component: 200 - total flux cleaned = 0.0384516 Jy ! Total flux subtracted in 200 components = 0.0384516 Jy ! Clean residual min=-0.005867 max=0.005448 Jy/beam ! Clean residual mean=-0.000010 rms=0.001374 Jy/beam ! Combined flux in latest and established models = 0.378578 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 67 components and 0.378577 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.367 mas, bmaj=8.917 mas, bpa=65.9 degrees ! Estimated noise=724.814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00666507 Jy ! Component: 100 - total flux cleaned = 0.0110783 Jy ! Component: 150 - total flux cleaned = 0.0142151 Jy ! Component: 200 - total flux cleaned = 0.0165077 Jy ! Total flux subtracted in 200 components = 0.0165077 Jy ! Clean residual min=-0.005936 max=0.005000 Jy/beam ! Clean residual mean=-0.000007 rms=0.001495 Jy/beam ! Combined flux in latest and established models = 0.395085 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001693 Jy ! Component: 100 - total flux cleaned = 0.00295857 Jy ! Component: 150 - total flux cleaned = 0.00391907 Jy ! Component: 200 - total flux cleaned = 0.00457649 Jy ! Total flux subtracted in 200 components = 0.00457649 Jy ! Clean residual min=-0.005855 max=0.004901 Jy/beam ! Clean residual mean=-0.000004 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.399662 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 135 components and 0.399662 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.221 mas, bmaj=4.91 mas, bpa=88.95 degrees ! Estimated noise=641.956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521595 Jy ! Component: 100 - total flux cleaned = 0.000461659 Jy ! Component: 150 - total flux cleaned = 0.000458519 Jy ! Component: 200 - total flux cleaned = 0.000561451 Jy ! Total flux subtracted in 200 components = 0.000561451 Jy ! Clean residual min=-0.005235 max=0.004961 Jy/beam ! Clean residual mean=-0.000003 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.400223 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 148 components and 0.400223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074222Jy sigma=0.000910 ! Fit after self-cal, rms=0.074194Jy sigma=0.000910 wmodel J0541+4729_S_2014_01_04_pus_map.mod ! Writing 148 model components to file: J0541+4729_S_2014_01_04_pus_map.mod wobs J0541+4729_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0541+4729_S_2014_01_04_pus_uvs.fits wwins J0541+4729_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0541+4729_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000563085 Jy ! Component: 100 - total flux cleaned = -0.000873997 Jy ! Component: 150 - total flux cleaned = -0.000870989 Jy ! Component: 200 - total flux cleaned = -0.000810209 Jy ! Component: 250 - total flux cleaned = -0.00075521 Jy ! Component: 300 - total flux cleaned = -0.000703419 Jy ! Component: 350 - total flux cleaned = -0.000654884 Jy ! Component: 400 - total flux cleaned = -0.00051375 Jy ! Component: 450 - total flux cleaned = -0.000468747 Jy ! Component: 500 - total flux cleaned = -0.000338716 Jy ! Component: 550 - total flux cleaned = -0.000423744 Jy ! Component: 600 - total flux cleaned = -0.000505299 Jy ! Component: 650 - total flux cleaned = -0.000659837 Jy ! Component: 700 - total flux cleaned = -0.000660265 Jy ! Component: 750 - total flux cleaned = -0.000732528 Jy ! Component: 800 - total flux cleaned = -0.000767367 Jy ! Component: 850 - total flux cleaned = -0.000734371 Jy ! Component: 900 - total flux cleaned = -0.000865243 Jy ! Component: 950 - total flux cleaned = -0.000927813 Jy ! Component: 1000 - total flux cleaned = -0.00101954 Jy ! Component: 1050 - total flux cleaned = -0.00104802 Jy ! Component: 1100 - total flux cleaned = -0.00104793 Jy ! Component: 1150 - total flux cleaned = -0.00116038 Jy ! Component: 1200 - total flux cleaned = -0.00124209 Jy ! Component: 1250 - total flux cleaned = -0.00129499 Jy ! Component: 1300 - total flux cleaned = -0.00142469 Jy ! Component: 1350 - total flux cleaned = -0.00150069 Jy ! Component: 1400 - total flux cleaned = -0.00159962 Jy ! Component: 1450 - total flux cleaned = -0.00176935 Jy ! Component: 1500 - total flux cleaned = -0.00186442 Jy ! Component: 1550 - total flux cleaned = -0.00205056 Jy ! Component: 1600 - total flux cleaned = -0.00216448 Jy ! Component: 1650 - total flux cleaned = -0.00234342 Jy ! Component: 1700 - total flux cleaned = -0.00251867 Jy ! Component: 1750 - total flux cleaned = -0.00264771 Jy ! Component: 1800 - total flux cleaned = -0.00281651 Jy ! Component: 1850 - total flux cleaned = -0.00291976 Jy ! Component: 1900 - total flux cleaned = -0.00304196 Jy ! Component: 1950 - total flux cleaned = -0.00322169 Jy ! Component: 2000 - total flux cleaned = -0.00337816 Jy ! Component: 2050 - total flux cleaned = -0.0034937 Jy ! Component: 2100 - total flux cleaned = -0.00366438 Jy ! Component: 2150 - total flux cleaned = -0.0038321 Jy ! Component: 2200 - total flux cleaned = -0.00399662 Jy ! Component: 2250 - total flux cleaned = -0.00414117 Jy ! Component: 2300 - total flux cleaned = -0.0043009 Jy ! Component: 2350 - total flux cleaned = -0.00445813 Jy ! Component: 2400 - total flux cleaned = -0.00464749 Jy ! Component: 2450 - total flux cleaned = -0.00478293 Jy ! Component: 2500 - total flux cleaned = -0.00498276 Jy ! Component: 2550 - total flux cleaned = -0.0050814 Jy ! Component: 2600 - total flux cleaned = -0.00521099 Jy ! Component: 2650 - total flux cleaned = -0.0053862 Jy ! Component: 2700 - total flux cleaned = -0.00543355 Jy ! Component: 2750 - total flux cleaned = -0.00551134 Jy ! Component: 2800 - total flux cleaned = -0.00557285 Jy ! Component: 2850 - total flux cleaned = -0.00567881 Jy ! Component: 2900 - total flux cleaned = -0.00579812 Jy ! Component: 2950 - total flux cleaned = -0.00585719 Jy ! Component: 3000 - total flux cleaned = -0.0059153 Jy ! Component: 3050 - total flux cleaned = -0.00598706 Jy ! Component: 3100 - total flux cleaned = -0.00604378 Jy ! Component: 3150 - total flux cleaned = -0.00607213 Jy ! Component: 3200 - total flux cleaned = -0.00615581 Jy ! Component: 3250 - total flux cleaned = -0.00618306 Jy ! Component: 3300 - total flux cleaned = -0.00622388 Jy ! Component: 3350 - total flux cleaned = -0.00621048 Jy ! Component: 3400 - total flux cleaned = -0.00627738 Jy ! Component: 3450 - total flux cleaned = -0.00635665 Jy ! Component: 3500 - total flux cleaned = -0.00638267 Jy ! Component: 3550 - total flux cleaned = -0.00646018 Jy ! Component: 3600 - total flux cleaned = -0.00645991 Jy ! Component: 3650 - total flux cleaned = -0.00651071 Jy ! Component: 3700 - total flux cleaned = -0.00654836 Jy ! Component: 3750 - total flux cleaned = -0.00657339 Jy ! Component: 3800 - total flux cleaned = -0.00663525 Jy ! Component: 3850 - total flux cleaned = -0.00668423 Jy ! Component: 3900 - total flux cleaned = -0.00675678 Jy ! Component: 3950 - total flux cleaned = -0.00679271 Jy ! Component: 4000 - total flux cleaned = -0.00679273 Jy ! Component: 4050 - total flux cleaned = -0.00682818 Jy ! Total flux subtracted in 4096 components = -0.00683993 Jy ! Clean residual min=-0.000655 max=0.000728 Jy/beam ! Clean residual mean=0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.393383 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 413 components and 0.393383 Jy ![Exited script file: muppet] wmap "J0541+4729_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.221 x 4.91 at 88.95 degrees (North through East) ! Clean map min=-0.0023312 max=0.24191 Jy/beam ! Writing clean map to FITS file: J0541+4729_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.241911 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000203334 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.252159 0.252159 0.504319 1.00864 2.01728 4.03455 8.0691 16.1382 32.2764 64.5528 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.241 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.221 x 4.91 at 88.95 degrees (North through East) ! Clean map min=-0.0023312 max=0.24191 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0541+4729_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:18:12 2017