! Started logfile: J0539-0514_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:55:59 2016 obs J0539-0514_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0539-0514_S_2014_08_09_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.7898 visibilities/baseline/integration-bin. ! Found source: J0539-0514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539-0514_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996663Jy sigma=0.009533 ! Fit after self-cal, rms=0.949132Jy sigma=0.009191 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.445 mas, bmaj=9.727 mas, bpa=17.67 degrees ! Estimated noise=714.061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406514 Jy ! Component: 100 - total flux cleaned = 0.0509286 Jy ! Total flux subtracted in 100 components = 0.0509286 Jy ! Clean residual min=-0.002810 max=0.004610 Jy/beam ! Clean residual mean=-0.000000 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0509286 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0509286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136035Jy sigma=0.000827 ! Fit after self-cal, rms=0.135410Jy sigma=0.000821 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.113 mas, bmaj=10.58 mas, bpa=16.73 degrees ! Estimated noise=577.006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671788 Jy ! Component: 100 - total flux cleaned = 0.00982422 Jy ! Component: 150 - total flux cleaned = 0.011453 Jy ! Component: 200 - total flux cleaned = 0.0119995 Jy ! Total flux subtracted in 200 components = 0.0119995 Jy ! Clean residual min=-0.003417 max=0.003970 Jy/beam ! Clean residual mean=0.000002 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.0629281 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 0.0629281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134671Jy sigma=0.000820 ! Fit after self-cal, rms=0.134574Jy sigma=0.000819 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.89 HN 1.02 KP 1.11 ! LA 1.10 MK 1.00* NL 1.02 OV 1.09 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.07 HN 1.17 KP 1.08 ! LA 1.04 MK 1.00* NL 1.05 OV 1.12 ! PT 1.10 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 1.07 KP 0.95 ! LA 0.91 MK 1.00* NL 1.03 OV 0.93 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 0.97 KP 0.76 ! LA 0.89 MK 1.00* NL 1.04 OV 0.98 ! PT 0.94 SC 1.06 ! ! ! Fit before self-cal, rms=0.134574Jy sigma=0.000819 ! Fit after self-cal, rms=0.123330Jy sigma=0.000815 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.132 mas, bmaj=10.65 mas, bpa=16.82 degrees ! Estimated noise=597.266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202859 Jy ! Component: 100 - total flux cleaned = 0.00233698 Jy ! Component: 150 - total flux cleaned = 0.0024017 Jy ! Component: 200 - total flux cleaned = 0.00237674 Jy ! Total flux subtracted in 200 components = 0.00237674 Jy ! Clean residual min=-0.003827 max=0.003842 Jy/beam ! Clean residual mean=-0.000001 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0653049 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.0653049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123204Jy sigma=0.000815 ! Fit after self-cal, rms=0.123128Jy sigma=0.000815 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123128Jy sigma=0.000815 ! Fit after self-cal, rms=0.098954Jy sigma=0.000805 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.129 mas, bmaj=10.54 mas, bpa=16.47 degrees ! Estimated noise=600.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000711896 Jy ! Component: 100 - total flux cleaned = 0.000943271 Jy ! Component: 150 - total flux cleaned = 0.000980075 Jy ! Component: 200 - total flux cleaned = 0.00101098 Jy ! Total flux subtracted in 200 components = 0.00101098 Jy ! Clean residual min=-0.001917 max=0.001948 Jy/beam ! Clean residual mean=-0.000001 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0663159 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.0663159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098943Jy sigma=0.000805 ! Fit after self-cal, rms=0.098907Jy sigma=0.000803 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216989 Jy ! Component: 100 - total flux cleaned = 0.00023248 Jy ! Component: 150 - total flux cleaned = 0.000233696 Jy ! Component: 200 - total flux cleaned = 0.000244229 Jy ! Total flux subtracted in 200 components = 0.000244229 Jy ! Clean residual min=-0.002068 max=0.002009 Jy/beam ! Clean residual mean=-0.000002 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0665601 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.0665601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098901Jy sigma=0.000803 ! Fit after self-cal, rms=0.098897Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098897Jy sigma=0.000803 ! Fit after self-cal, rms=0.099459Jy sigma=0.000803 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.119 mas, bmaj=10.5 mas, bpa=16.46 degrees ! Estimated noise=605.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702172 Jy ! Component: 100 - total flux cleaned = 0.00105832 Jy ! Component: 150 - total flux cleaned = 0.00113469 Jy ! Component: 200 - total flux cleaned = 0.00114292 Jy ! Total flux subtracted in 200 components = 0.00114292 Jy ! Clean residual min=-0.001979 max=0.001983 Jy/beam ! Clean residual mean=-0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.067703 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 78 components and 0.067703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099448Jy sigma=0.000803 ! Fit after self-cal, rms=0.099474Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.95525e-05 Jy ! Component: 100 - total flux cleaned = 3.07109e-05 Jy ! Component: 150 - total flux cleaned = 3.14487e-05 Jy ! Component: 200 - total flux cleaned = 3.14338e-05 Jy ! Total flux subtracted in 200 components = 3.14338e-05 Jy ! Clean residual min=-0.001983 max=0.001999 Jy/beam ! Clean residual mean=-0.000001 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0677345 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.0677345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099472Jy sigma=0.000802 ! Fit after self-cal, rms=0.099464Jy sigma=0.000802 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099464Jy sigma=0.000802 ! Fit after self-cal, rms=0.100462Jy sigma=0.000802 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.905 mas, bmaj=13.37 mas, bpa=5.058 degrees ! Estimated noise=708.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000660574 Jy ! Component: 100 - total flux cleaned = 0.000834501 Jy ! Component: 150 - total flux cleaned = 0.000834869 Jy ! Component: 200 - total flux cleaned = 0.000834868 Jy ! Total flux subtracted in 200 components = 0.000834868 Jy ! Clean residual min=-0.001905 max=0.002359 Jy/beam ! Clean residual mean=-0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0685693 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 91 components and 0.0685693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100454Jy sigma=0.000802 ! Fit after self-cal, rms=0.100465Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81618e-05 Jy ! Component: 100 - total flux cleaned = -3.07911e-05 Jy ! Component: 150 - total flux cleaned = -3.61711e-05 Jy ! Component: 200 - total flux cleaned = -3.57296e-05 Jy ! Total flux subtracted in 200 components = -3.57296e-05 Jy ! Clean residual min=-0.001916 max=0.002343 Jy/beam ! Clean residual mean=-0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0685336 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 93 components and 0.0685336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100466Jy sigma=0.000802 ! Fit after self-cal, rms=0.100464Jy sigma=0.000802 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.11 mas, bmaj=10.47 mas, bpa=16.43 degrees ! Estimated noise=611.497 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.11 x 10.47 at 16.43 degrees (North through East) ! Clean map min=-0.0019431 max=0.057963 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=9.541 mas, bpa=17.09 degrees ! Estimated noise=755.712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434499 Jy ! Component: 100 - total flux cleaned = 0.0547795 Jy ! Component: 150 - total flux cleaned = 0.0599525 Jy ! Component: 200 - total flux cleaned = 0.0629199 Jy ! Total flux subtracted in 200 components = 0.0629199 Jy ! Clean residual min=-0.002570 max=0.002389 Jy/beam ! Clean residual mean=-0.000001 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0629199 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0629199 Jy ! Inverting map and beam ! Estimated beam: bmin=4.11 mas, bmaj=10.47 mas, bpa=16.43 degrees ! Estimated noise=611.497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312079 Jy ! Component: 100 - total flux cleaned = 0.00467689 Jy ! Component: 150 - total flux cleaned = 0.00539963 Jy ! Component: 200 - total flux cleaned = 0.00552067 Jy ! Total flux subtracted in 200 components = 0.00552067 Jy ! Clean residual min=-0.002115 max=0.002056 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0684406 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 62 components and 0.0684406 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.905 mas, bmaj=13.37 mas, bpa=5.058 degrees ! Estimated noise=708.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013942 Jy ! Component: 100 - total flux cleaned = 0.000123602 Jy ! Component: 150 - total flux cleaned = 0.000124643 Jy ! Component: 200 - total flux cleaned = 0.000112449 Jy ! Total flux subtracted in 200 components = 0.000112449 Jy ! Clean residual min=-0.001954 max=0.002342 Jy/beam ! Clean residual mean=-0.000002 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.068553 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.1401e-05 Jy ! Component: 100 - total flux cleaned = -3.1248e-05 Jy ! Component: 150 - total flux cleaned = -3.97616e-05 Jy ! Component: 200 - total flux cleaned = -4.79683e-05 Jy ! Total flux subtracted in 200 components = -4.79683e-05 Jy ! Clean residual min=-0.001930 max=0.002349 Jy/beam ! Clean residual mean=-0.000002 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.068505 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.068505 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.11 mas, bmaj=10.47 mas, bpa=16.43 degrees ! Estimated noise=611.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.32838e-05 Jy ! Component: 100 - total flux cleaned = 3.1487e-05 Jy ! Component: 150 - total flux cleaned = 4.51516e-05 Jy ! Component: 200 - total flux cleaned = 4.5769e-05 Jy ! Total flux subtracted in 200 components = 4.5769e-05 Jy ! Clean residual min=-0.001980 max=0.002071 Jy/beam ! Clean residual mean=-0.000001 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0685508 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.0685508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100467Jy sigma=0.000802 ! Fit after self-cal, rms=0.100460Jy sigma=0.000802 wmodel J0539-0514_S_2014_08_09_pus_map.mod ! Writing 83 model components to file: J0539-0514_S_2014_08_09_pus_map.mod wobs J0539-0514_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0539-0514_S_2014_08_09_pus_uvs.fits wwins J0539-0514_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J0539-0514_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392611 Jy ! Component: 100 - total flux cleaned = -0.000428585 Jy ! Component: 150 - total flux cleaned = -0.00036862 Jy ! Component: 200 - total flux cleaned = -0.000339333 Jy ! Component: 250 - total flux cleaned = -0.00020087 Jy ! Component: 300 - total flux cleaned = -9.38194e-05 Jy ! Component: 350 - total flux cleaned = 3.57583e-05 Jy ! Component: 400 - total flux cleaned = 0.000162521 Jy ! Component: 450 - total flux cleaned = 0.000236382 Jy ! Component: 500 - total flux cleaned = 0.000308435 Jy ! Component: 550 - total flux cleaned = 0.000356035 Jy ! Component: 600 - total flux cleaned = 0.000379821 Jy ! Component: 650 - total flux cleaned = 0.000425836 Jy ! Component: 700 - total flux cleaned = 0.000514767 Jy ! Component: 750 - total flux cleaned = 0.000492711 Jy ! Component: 800 - total flux cleaned = 0.000493094 Jy ! Component: 850 - total flux cleaned = 0.000620838 Jy ! Component: 900 - total flux cleaned = 0.000641228 Jy ! Component: 950 - total flux cleaned = 0.000722925 Jy ! Component: 1000 - total flux cleaned = 0.00076293 Jy ! Component: 1050 - total flux cleaned = 0.000782694 Jy ! Component: 1100 - total flux cleaned = 0.000841786 Jy ! Component: 1150 - total flux cleaned = 0.000976712 Jy ! Component: 1200 - total flux cleaned = 0.000995775 Jy ! Component: 1250 - total flux cleaned = 0.00107098 Jy ! Component: 1300 - total flux cleaned = 0.00118184 Jy ! Component: 1350 - total flux cleaned = 0.0012182 Jy ! Component: 1400 - total flux cleaned = 0.00125416 Jy ! Component: 1450 - total flux cleaned = 0.00132522 Jy ! Component: 1500 - total flux cleaned = 0.00139491 Jy ! Component: 1550 - total flux cleaned = 0.00141216 Jy ! Component: 1600 - total flux cleaned = 0.00146345 Jy ! Component: 1650 - total flux cleaned = 0.00148029 Jy ! Component: 1700 - total flux cleaned = 0.00148031 Jy ! Component: 1750 - total flux cleaned = 0.00151327 Jy ! Component: 1800 - total flux cleaned = 0.00151322 Jy ! Component: 1850 - total flux cleaned = 0.00156116 Jy ! Component: 1900 - total flux cleaned = 0.00157685 Jy ! Component: 1950 - total flux cleaned = 0.00156123 Jy ! Component: 2000 - total flux cleaned = 0.00157649 Jy ! Component: 2050 - total flux cleaned = 0.00157646 Jy ! Component: 2100 - total flux cleaned = 0.00162167 Jy ! Component: 2150 - total flux cleaned = 0.00160666 Jy ! Component: 2200 - total flux cleaned = 0.00160672 Jy ! Component: 2250 - total flux cleaned = 0.00157771 Jy ! Component: 2300 - total flux cleaned = 0.00159241 Jy ! Component: 2350 - total flux cleaned = 0.00166403 Jy ! Component: 2400 - total flux cleaned = 0.00166389 Jy ! Component: 2450 - total flux cleaned = 0.00163582 Jy ! Component: 2500 - total flux cleaned = 0.00164981 Jy ! Component: 2550 - total flux cleaned = 0.0017048 Jy ! Component: 2600 - total flux cleaned = 0.00169108 Jy ! Component: 2650 - total flux cleaned = 0.00170469 Jy ! Component: 2700 - total flux cleaned = 0.00173129 Jy ! Component: 2750 - total flux cleaned = 0.00169152 Jy ! Component: 2800 - total flux cleaned = 0.00171783 Jy ! Component: 2850 - total flux cleaned = 0.00173068 Jy ! Component: 2900 - total flux cleaned = 0.0017565 Jy ! Component: 2950 - total flux cleaned = 0.00169249 Jy ! Component: 3000 - total flux cleaned = 0.00174319 Jy ! Component: 3050 - total flux cleaned = 0.0016803 Jy ! Component: 3100 - total flux cleaned = 0.00170519 Jy ! Component: 3150 - total flux cleaned = 0.00169277 Jy ! Component: 3200 - total flux cleaned = 0.00166828 Jy ! Component: 3250 - total flux cleaned = 0.0016439 Jy ! Component: 3300 - total flux cleaned = 0.00164405 Jy ! Component: 3350 - total flux cleaned = 0.00163211 Jy ! Component: 3400 - total flux cleaned = 0.00165569 Jy ! Component: 3450 - total flux cleaned = 0.00164385 Jy ! Component: 3500 - total flux cleaned = 0.00167905 Jy ! Component: 3550 - total flux cleaned = 0.00164401 Jy ! Component: 3600 - total flux cleaned = 0.00164401 Jy ! Component: 3650 - total flux cleaned = 0.00163254 Jy ! Component: 3700 - total flux cleaned = 0.00163249 Jy ! Component: 3750 - total flux cleaned = 0.00162106 Jy ! Component: 3800 - total flux cleaned = 0.00162086 Jy ! Component: 3850 - total flux cleaned = 0.00160966 Jy ! Component: 3900 - total flux cleaned = 0.0015875 Jy ! Component: 3950 - total flux cleaned = 0.00163144 Jy ! Component: 4000 - total flux cleaned = 0.00162045 Jy ! Component: 4050 - total flux cleaned = 0.00159876 Jy ! Total flux subtracted in 4096 components = 0.00156657 Jy ! Clean residual min=-0.000750 max=0.000551 Jy/beam ! Clean residual mean=-0.000001 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0701174 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 385 components and 0.0701174 Jy ![Exited script file: muppet] wmap "J0539-0514_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.11 x 10.47 at 16.43 degrees (North through East) ! Clean map min=-0.0013967 max=0.058138 Jy/beam ! Writing clean map to FITS file: J0539-0514_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0581376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210444 device "J0539-0514_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0539-0514_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08593 1.08593 2.17186 4.34371 8.68743 17.3749 34.7497 69.4994 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.11 x 10.47 at 16.43 degrees (North through East) ! Clean map min=-0.0013967 max=0.058138 Jy/beam quit ! Quitting program ! Log file J0539-0514_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:56:05 2016