! Started logfile: J0539+1951_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:06:37 2017 obs J0539+1951_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0539+1951_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.786226 visibilities/baseline/integration-bin. ! Found source: J0539+1951 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0539+1951_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 251 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 191 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986388Jy sigma=0.013200 ! Fit after self-cal, rms=0.958512Jy sigma=0.012838 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=7.245 mas, bpa=-8.341 degrees ! Estimated noise=710.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322451 Jy ! Component: 100 - total flux cleaned = 0.0398524 Jy ! Total flux subtracted in 100 components = 0.0398524 Jy ! Clean residual min=-0.002832 max=0.003229 Jy/beam ! Clean residual mean=0.000005 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.0398524 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0398524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062002Jy sigma=0.000773 ! Fit after self-cal, rms=0.061512Jy sigma=0.000766 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.262 mas, bpa=-9.796 degrees ! Estimated noise=434.864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447038 Jy ! Component: 100 - total flux cleaned = 0.00659684 Jy ! Component: 150 - total flux cleaned = 0.00778631 Jy ! Component: 200 - total flux cleaned = 0.00848388 Jy ! Total flux subtracted in 200 components = 0.00848388 Jy ! Clean residual min=-0.002072 max=0.002417 Jy/beam ! Clean residual mean=0.000009 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0483363 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 51 components and 0.0483363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061136Jy sigma=0.000763 ! Fit after self-cal, rms=0.061094Jy sigma=0.000762 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.91 KP 1.20 ! LA 1.00 MK 0.96 NL 1.16 OV 1.02 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.98 KP 1.03 ! LA 0.95 MK 1.05 NL 1.18 OV 0.98 ! PT 1.01 SC 1.18 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.05 KP 0.94 ! LA 0.77 MK 1.05 NL 1.30 OV 0.94 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.93 KP 0.87 ! LA 0.77 MK 1.06 NL 0.95 OV 1.00 ! PT 1.00 SC 1.02 ! ! ! Fit before self-cal, rms=0.061094Jy sigma=0.000762 ! Fit after self-cal, rms=0.059197Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.254 mas, bmaj=8.316 mas, bpa=-9.713 degrees ! Estimated noise=433.863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258419 Jy ! Component: 100 - total flux cleaned = 0.004221 Jy ! Component: 150 - total flux cleaned = 0.0054228 Jy ! Component: 200 - total flux cleaned = 0.00635365 Jy ! Total flux subtracted in 200 components = 0.00635365 Jy ! Clean residual min=-0.001387 max=0.001466 Jy/beam ! Clean residual mean=0.000003 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.05469 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 83 components and 0.05469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059069Jy sigma=0.000756 ! Fit after self-cal, rms=0.059047Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059047Jy sigma=0.000755 ! Fit after self-cal, rms=0.059074Jy sigma=0.000754 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=8.357 mas, bpa=-9.532 degrees ! Estimated noise=431.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117435 Jy ! Component: 100 - total flux cleaned = 0.00198259 Jy ! Component: 150 - total flux cleaned = 0.0025039 Jy ! Component: 200 - total flux cleaned = 0.0027912 Jy ! Total flux subtracted in 200 components = 0.0027912 Jy ! Clean residual min=-0.001187 max=0.001157 Jy/beam ! Clean residual mean=0.000001 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.0574812 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 109 components and 0.0574812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059044Jy sigma=0.000753 ! Fit after self-cal, rms=0.059076Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716955 Jy ! Component: 100 - total flux cleaned = 0.00107534 Jy ! Component: 150 - total flux cleaned = 0.00123265 Jy ! Component: 200 - total flux cleaned = 0.00133921 Jy ! Total flux subtracted in 200 components = 0.00133921 Jy ! Clean residual min=-0.001129 max=0.001087 Jy/beam ! Clean residual mean=0.000000 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.0588204 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 0.0588204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059062Jy sigma=0.000753 ! Fit after self-cal, rms=0.059064Jy sigma=0.000753 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059064Jy sigma=0.000753 ! Fit after self-cal, rms=0.059206Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.263 mas, bmaj=8.351 mas, bpa=-9.514 degrees ! Estimated noise=432.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000538208 Jy ! Component: 100 - total flux cleaned = 0.000772377 Jy ! Component: 150 - total flux cleaned = 0.000859062 Jy ! Component: 200 - total flux cleaned = 0.000953164 Jy ! Total flux subtracted in 200 components = 0.000953164 Jy ! Clean residual min=-0.001111 max=0.001081 Jy/beam ! Clean residual mean=0.000000 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.0597736 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.0597736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059197Jy sigma=0.000753 ! Fit after self-cal, rms=0.059204Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000254627 Jy ! Component: 100 - total flux cleaned = 0.000322171 Jy ! Component: 150 - total flux cleaned = 0.000384202 Jy ! Component: 200 - total flux cleaned = 0.000442251 Jy ! Total flux subtracted in 200 components = 0.000442251 Jy ! Clean residual min=-0.001100 max=0.001059 Jy/beam ! Clean residual mean=-0.000000 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 0.0602158 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.0602158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059198Jy sigma=0.000753 ! Fit after self-cal, rms=0.059200Jy sigma=0.000753 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059200Jy sigma=0.000753 ! Fit after self-cal, rms=0.059226Jy sigma=0.000753 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.917 mas, bmaj=11.04 mas, bpa=-9.086 degrees ! Estimated noise=533.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688266 Jy ! Component: 100 - total flux cleaned = 0.000959789 Jy ! Component: 150 - total flux cleaned = 0.00116764 Jy ! Component: 200 - total flux cleaned = 0.00130803 Jy ! Total flux subtracted in 200 components = 0.00130803 Jy ! Clean residual min=-0.001177 max=0.001266 Jy/beam ! Clean residual mean=0.000000 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0615238 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 135 components and 0.0615238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059226Jy sigma=0.000753 ! Fit after self-cal, rms=0.059224Jy sigma=0.000753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.0261e-05 Jy ! Component: 100 - total flux cleaned = 0.000274731 Jy ! Component: 150 - total flux cleaned = 0.00036425 Jy ! Component: 200 - total flux cleaned = 0.000402858 Jy ! Total flux subtracted in 200 components = 0.000402858 Jy ! Clean residual min=-0.001181 max=0.001237 Jy/beam ! Clean residual mean=0.000000 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0619267 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 0.0619267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059224Jy sigma=0.000753 ! Fit after self-cal, rms=0.059224Jy sigma=0.000753 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.34 mas, bpa=-9.517 degrees ! Estimated noise=432.664 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 8.34 at -9.517 degrees (North through East) ! Clean map min=-0.0010077 max=0.04303 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.75 mas, bmaj=7.332 mas, bpa=-8.271 degrees ! Estimated noise=705.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322876 Jy ! Component: 100 - total flux cleaned = 0.0399703 Jy ! Component: 150 - total flux cleaned = 0.0437332 Jy ! Component: 200 - total flux cleaned = 0.0462169 Jy ! Total flux subtracted in 200 components = 0.0462169 Jy ! Clean residual min=-0.002480 max=0.002206 Jy/beam ! Clean residual mean=0.000003 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0462168 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.0462168 Jy ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.34 mas, bpa=-9.517 degrees ! Estimated noise=432.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329209 Jy ! Component: 100 - total flux cleaned = 0.00558225 Jy ! Component: 150 - total flux cleaned = 0.00735496 Jy ! Component: 200 - total flux cleaned = 0.00876186 Jy ! Total flux subtracted in 200 components = 0.00876186 Jy ! Clean residual min=-0.001443 max=0.001420 Jy/beam ! Clean residual mean=0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0549787 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.0549787 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.917 mas, bmaj=11.04 mas, bpa=-9.086 degrees ! Estimated noise=533.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190071 Jy ! Component: 100 - total flux cleaned = 0.00321967 Jy ! Component: 150 - total flux cleaned = 0.00420567 Jy ! Component: 200 - total flux cleaned = 0.0049605 Jy ! Total flux subtracted in 200 components = 0.0049605 Jy ! Clean residual min=-0.001389 max=0.001304 Jy/beam ! Clean residual mean=0.000002 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0599392 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000585586 Jy ! Component: 100 - total flux cleaned = 0.00104747 Jy ! Component: 150 - total flux cleaned = 0.00141604 Jy ! Component: 200 - total flux cleaned = 0.00158754 Jy ! Total flux subtracted in 200 components = 0.00158754 Jy ! Clean residual min=-0.001261 max=0.001226 Jy/beam ! Clean residual mean=0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0615267 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 110 components and 0.0615267 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.34 mas, bpa=-9.517 degrees ! Estimated noise=432.664 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249574 Jy ! Component: 100 - total flux cleaned = -0.000180318 Jy ! Component: 150 - total flux cleaned = -7.78803e-05 Jy ! Component: 200 - total flux cleaned = -4.08823e-05 Jy ! Total flux subtracted in 200 components = -4.08823e-05 Jy ! Clean residual min=-0.001175 max=0.000997 Jy/beam ! Clean residual mean=-0.000000 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.0614858 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 126 components and 0.0614858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059237Jy sigma=0.000753 ! Fit after self-cal, rms=0.059236Jy sigma=0.000753 wmodel J0539+1951_S_2015_01_23_pus_map.mod ! Writing 126 model components to file: J0539+1951_S_2015_01_23_pus_map.mod wobs J0539+1951_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0539+1951_S_2015_01_23_pus_uvs.fits wwins J0539+1951_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J0539+1951_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000425634 Jy ! Component: 100 - total flux cleaned = -0.00062686 Jy ! Component: 150 - total flux cleaned = -0.000784322 Jy ! Component: 200 - total flux cleaned = -0.000954185 Jy ! Component: 250 - total flux cleaned = -0.00111904 Jy ! Component: 300 - total flux cleaned = -0.00126338 Jy ! Component: 350 - total flux cleaned = -0.00145111 Jy ! Component: 400 - total flux cleaned = -0.00161952 Jy ! Component: 450 - total flux cleaned = -0.00181379 Jy ! Component: 500 - total flux cleaned = -0.00201813 Jy ! Component: 550 - total flux cleaned = -0.00217531 Jy ! Component: 600 - total flux cleaned = -0.0023013 Jy ! Component: 650 - total flux cleaned = -0.00241131 Jy ! Component: 700 - total flux cleaned = -0.00253275 Jy ! Component: 750 - total flux cleaned = -0.00265203 Jy ! Component: 800 - total flux cleaned = -0.00275629 Jy ! Component: 850 - total flux cleaned = -0.00289672 Jy ! Component: 900 - total flux cleaned = -0.00299716 Jy ! Component: 950 - total flux cleaned = -0.00309594 Jy ! Component: 1000 - total flux cleaned = -0.0032293 Jy ! Component: 1050 - total flux cleaned = -0.00328872 Jy ! Component: 1100 - total flux cleaned = -0.00340609 Jy ! Component: 1150 - total flux cleaned = -0.00347556 Jy ! Component: 1200 - total flux cleaned = -0.00355524 Jy ! Component: 1250 - total flux cleaned = -0.00362272 Jy ! Component: 1300 - total flux cleaned = -0.00367823 Jy ! Component: 1350 - total flux cleaned = -0.00376548 Jy ! Component: 1400 - total flux cleaned = -0.00383032 Jy ! Component: 1450 - total flux cleaned = -0.00392622 Jy ! Component: 1500 - total flux cleaned = -0.00399992 Jy ! Component: 1550 - total flux cleaned = -0.00406213 Jy ! Component: 1600 - total flux cleaned = -0.00414425 Jy ! Component: 1650 - total flux cleaned = -0.00422503 Jy ! Component: 1700 - total flux cleaned = -0.00425499 Jy ! Component: 1750 - total flux cleaned = -0.00436355 Jy ! Component: 1800 - total flux cleaned = -0.00445127 Jy ! Component: 1850 - total flux cleaned = -0.00449947 Jy ! Component: 1900 - total flux cleaned = -0.00457567 Jy ! Component: 1950 - total flux cleaned = -0.00464163 Jy ! Component: 2000 - total flux cleaned = -0.00469736 Jy ! Component: 2050 - total flux cleaned = -0.00476184 Jy ! Component: 2100 - total flux cleaned = -0.00484374 Jy ! Component: 2150 - total flux cleaned = -0.0048618 Jy ! Component: 2200 - total flux cleaned = -0.00491525 Jy ! Component: 2250 - total flux cleaned = -0.00495051 Jy ! Component: 2300 - total flux cleaned = -0.00498543 Jy ! Component: 2350 - total flux cleaned = -0.00501985 Jy ! Component: 2400 - total flux cleaned = -0.00505408 Jy ! Component: 2450 - total flux cleaned = -0.00509637 Jy ! Component: 2500 - total flux cleaned = -0.0051299 Jy ! Component: 2550 - total flux cleaned = -0.0051796 Jy ! Component: 2600 - total flux cleaned = -0.00521245 Jy ! Component: 2650 - total flux cleaned = -0.00522874 Jy ! Component: 2700 - total flux cleaned = -0.00522863 Jy ! Component: 2750 - total flux cleaned = -0.00524461 Jy ! Component: 2800 - total flux cleaned = -0.00523665 Jy ! Component: 2850 - total flux cleaned = -0.00527599 Jy ! Component: 2900 - total flux cleaned = -0.00526047 Jy ! Component: 2950 - total flux cleaned = -0.00529927 Jy ! Component: 3000 - total flux cleaned = -0.00530695 Jy ! Component: 3050 - total flux cleaned = -0.00533739 Jy ! Component: 3100 - total flux cleaned = -0.00535995 Jy ! Component: 3150 - total flux cleaned = -0.00538239 Jy ! Component: 3200 - total flux cleaned = -0.00541212 Jy ! Component: 3250 - total flux cleaned = -0.00543408 Jy ! Component: 3300 - total flux cleaned = -0.00547074 Jy ! Component: 3350 - total flux cleaned = -0.00546346 Jy ! Component: 3400 - total flux cleaned = -0.00547792 Jy ! Component: 3450 - total flux cleaned = -0.00549231 Jy ! Component: 3500 - total flux cleaned = -0.00552074 Jy ! Component: 3550 - total flux cleaned = -0.0055278 Jy ! Component: 3600 - total flux cleaned = -0.00555582 Jy ! Component: 3650 - total flux cleaned = -0.00557673 Jy ! Component: 3700 - total flux cleaned = -0.00558358 Jy ! Component: 3750 - total flux cleaned = -0.00559034 Jy ! Component: 3800 - total flux cleaned = -0.00561767 Jy ! Component: 3850 - total flux cleaned = -0.00559057 Jy ! Component: 3900 - total flux cleaned = -0.00559738 Jy ! Component: 3950 - total flux cleaned = -0.00559068 Jy ! Component: 4000 - total flux cleaned = -0.00559731 Jy ! Component: 4050 - total flux cleaned = -0.00561046 Jy ! Total flux subtracted in 4096 components = -0.0056039 Jy ! Clean residual min=-0.000358 max=0.000470 Jy/beam ! Clean residual mean=-0.000000 rms=0.000123 Jy/beam ! Combined flux in latest and established models = 0.055882 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 418 components and 0.0558819 Jy ![Exited script file: muppet] wmap "J0539+1951_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 8.34 at -9.517 degrees (North through East) ! Clean map min=-0.00098186 max=0.042775 Jy/beam ! Writing clean map to FITS file: J0539+1951_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0427753 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000120377 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.844249 0.844249 1.6885 3.37699 6.75399 13.508 27.016 54.0319 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 8.34 at -9.517 degrees (North through East) ! Clean map min=-0.00098186 max=0.042775 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0539+1951_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:06:43 2017