! Started logfile: J0536-3401_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:06:28 2017 obs J0536-3401_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0536-3401_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.601587 visibilities/baseline/integration-bin. ! Found source: J0536-3401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 1516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536-3401_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.861023Jy sigma=0.002756 ! Fit after self-cal, rms=0.844795Jy sigma=0.002671 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=16.35 mas, bpa=12.05 degrees ! Estimated noise=4102.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51579 Jy ! Component: 100 - total flux cleaned = 0.640421 Jy ! Total flux subtracted in 100 components = 0.640421 Jy ! Clean residual min=-0.053109 max=0.054347 Jy/beam ! Clean residual mean=0.000057 rms=0.013410 Jy/beam ! Combined flux in latest and established models = 0.640421 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.640421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.880795Jy sigma=0.001242 ! Fit after self-cal, rms=0.880779Jy sigma=0.001241 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=16.16 mas, bpa=11.47 degrees ! Estimated noise=3005.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0827399 Jy ! Component: 100 - total flux cleaned = 0.131963 Jy ! Component: 150 - total flux cleaned = 0.16423 Jy ! Component: 200 - total flux cleaned = 0.186471 Jy ! Total flux subtracted in 200 components = 0.186471 Jy ! Clean residual min=-0.046015 max=0.034775 Jy/beam ! Clean residual mean=0.000244 rms=0.010625 Jy/beam ! Combined flux in latest and established models = 0.826892 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 95 components and 0.826892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.844028Jy sigma=0.001087 ! Fit after self-cal, rms=0.844091Jy sigma=0.001087 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.32 HN 1.05 KP 1.16 ! LA 1.02 MK 1.00* NL 1.19 OV 1.01 ! PT 1.13 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.32 HN 1.08 KP 1.04 ! LA 1.00 MK 1.00* NL 1.13 OV 1.01 ! PT 1.09 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.56 HN 1.04 KP 0.92 ! LA 0.79 MK 1.00* NL 1.08 OV 0.94 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.67 HN 1.03 KP 0.85 ! LA 0.84 MK 1.00* NL 0.99 OV 0.99 ! PT 1.09 SC 0.99 ! ! ! Fit before self-cal, rms=0.844091Jy sigma=0.001087 ! Fit after self-cal, rms=0.293933Jy sigma=0.000785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=16.52 mas, bpa=11.49 degrees ! Estimated noise=2996.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0113931 Jy ! Component: 100 - total flux cleaned = -0.0140789 Jy ! Component: 150 - total flux cleaned = -0.0153963 Jy ! Component: 200 - total flux cleaned = -0.0160275 Jy ! Total flux subtracted in 200 components = -0.0160275 Jy ! Clean residual min=-0.016755 max=0.013825 Jy/beam ! Clean residual mean=-0.000016 rms=0.003767 Jy/beam ! Combined flux in latest and established models = 0.810865 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 111 components and 0.810865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293587Jy sigma=0.000778 ! Fit after self-cal, rms=0.293255Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293255Jy sigma=0.000778 ! Fit after self-cal, rms=0.292211Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.418 mas, bmaj=16.61 mas, bpa=11.55 degrees ! Estimated noise=2997.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00774386 Jy ! Component: 100 - total flux cleaned = -0.00950325 Jy ! Component: 150 - total flux cleaned = -0.0101502 Jy ! Component: 200 - total flux cleaned = -0.0104433 Jy ! Total flux subtracted in 200 components = -0.0104433 Jy ! Clean residual min=-0.014860 max=0.013019 Jy/beam ! Clean residual mean=-0.000018 rms=0.003365 Jy/beam ! Combined flux in latest and established models = 0.800421 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.800421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292020Jy sigma=0.000772 ! Fit after self-cal, rms=0.292048Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118113 Jy ! Component: 100 - total flux cleaned = -3.98126e-05 Jy ! Component: 150 - total flux cleaned = -0.000111676 Jy ! Component: 200 - total flux cleaned = -0.0001708 Jy ! Total flux subtracted in 200 components = -0.0001708 Jy ! Clean residual min=-0.014463 max=0.013047 Jy/beam ! Clean residual mean=-0.000018 rms=0.003345 Jy/beam ! Combined flux in latest and established models = 0.80025 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 130 components and 0.80025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.291984Jy sigma=0.000772 ! Fit after self-cal, rms=0.292001Jy sigma=0.000772 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292001Jy sigma=0.000772 ! Fit after self-cal, rms=0.292242Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=16.69 mas, bpa=11.62 degrees ! Estimated noise=3000.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00555441 Jy ! Component: 100 - total flux cleaned = -0.00671871 Jy ! Component: 150 - total flux cleaned = -0.00720467 Jy ! Component: 200 - total flux cleaned = -0.00751753 Jy ! Total flux subtracted in 200 components = -0.00751753 Jy ! Clean residual min=-0.013254 max=0.012424 Jy/beam ! Clean residual mean=-0.000019 rms=0.003090 Jy/beam ! Combined flux in latest and established models = 0.792733 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.792733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292136Jy sigma=0.000768 ! Fit after self-cal, rms=0.292171Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24312e-05 Jy ! Component: 100 - total flux cleaned = -0.000147674 Jy ! Component: 150 - total flux cleaned = -0.000311809 Jy ! Component: 200 - total flux cleaned = -0.000410646 Jy ! Total flux subtracted in 200 components = -0.000410646 Jy ! Clean residual min=-0.013057 max=0.012414 Jy/beam ! Clean residual mean=-0.000019 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 0.792322 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 154 components and 0.792322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292124Jy sigma=0.000768 ! Fit after self-cal, rms=0.292141Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292141Jy sigma=0.000768 ! Fit after self-cal, rms=0.292459Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.365 mas, bmaj=23 mas, bpa=2.186 degrees ! Estimated noise=3743.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00388384 Jy ! Component: 100 - total flux cleaned = -0.00462984 Jy ! Component: 150 - total flux cleaned = -0.00486679 Jy ! Component: 200 - total flux cleaned = -0.00505599 Jy ! Total flux subtracted in 200 components = -0.00505599 Jy ! Clean residual min=-0.013565 max=0.012845 Jy/beam ! Clean residual mean=-0.000029 rms=0.004049 Jy/beam ! Combined flux in latest and established models = 0.787266 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 166 components and 0.787266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292382Jy sigma=0.000766 ! Fit after self-cal, rms=0.292411Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405639 Jy ! Component: 100 - total flux cleaned = 0.000358482 Jy ! Component: 150 - total flux cleaned = 0.00035509 Jy ! Component: 200 - total flux cleaned = 0.000390504 Jy ! Total flux subtracted in 200 components = 0.000390504 Jy ! Clean residual min=-0.013430 max=0.012917 Jy/beam ! Clean residual mean=-0.000030 rms=0.004047 Jy/beam ! Combined flux in latest and established models = 0.787657 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 177 components and 0.787657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292388Jy sigma=0.000766 ! Fit after self-cal, rms=0.292402Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=16.75 mas, bpa=11.67 degrees ! Estimated noise=3001.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.42 x 16.75 at 11.67 degrees (North through East) ! Clean map min=-0.01187 max=0.63756 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292402Jy sigma=0.000766 ! Fit after self-cal, rms=0.294946Jy sigma=0.000700 ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=16.79 mas, bpa=11.71 degrees ! Estimated noise=2998.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00401326 Jy ! Component: 100 - total flux cleaned = -0.00496408 Jy ! Component: 150 - total flux cleaned = -0.00539104 Jy ! Component: 200 - total flux cleaned = -0.00562684 Jy ! Total flux subtracted in 200 components = -0.00562684 Jy ! Clean residual min=-0.011198 max=0.011251 Jy/beam ! Clean residual mean=-0.000017 rms=0.002786 Jy/beam ! Combined flux in latest and established models = 0.78203 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 191 components and 0.78203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294883Jy sigma=0.000699 ! Fit after self-cal, rms=0.294888Jy sigma=0.000699 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.8826e-05 Jy ! Component: 100 - total flux cleaned = -0.000241311 Jy ! Component: 150 - total flux cleaned = -0.000375822 Jy ! Component: 200 - total flux cleaned = -0.000458692 Jy ! Total flux subtracted in 200 components = -0.000458692 Jy ! Clean residual min=-0.011094 max=0.011243 Jy/beam ! Clean residual mean=-0.000017 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 0.781571 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 203 components and 0.781571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294846Jy sigma=0.000699 ! Fit after self-cal, rms=0.294868Jy sigma=0.000699 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294868Jy sigma=0.000699 ! Fit after self-cal, rms=0.295179Jy sigma=0.000698 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=16.94 mas, bpa=12.31 degrees ! Estimated noise=4135.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.519723 Jy ! Component: 100 - total flux cleaned = 0.635519 Jy ! Component: 150 - total flux cleaned = 0.684253 Jy ! Component: 200 - total flux cleaned = 0.714468 Jy ! Total flux subtracted in 200 components = 0.714468 Jy ! Clean residual min=-0.015120 max=0.018720 Jy/beam ! Clean residual mean=-0.000062 rms=0.004636 Jy/beam ! Combined flux in latest and established models = 0.714468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.714468 Jy ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=16.83 mas, bpa=11.75 degrees ! Estimated noise=2998.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240825 Jy ! Component: 100 - total flux cleaned = 0.0374675 Jy ! Component: 150 - total flux cleaned = 0.0455323 Jy ! Component: 200 - total flux cleaned = 0.0506088 Jy ! Total flux subtracted in 200 components = 0.0506088 Jy ! Clean residual min=-0.010819 max=0.011064 Jy/beam ! Clean residual mean=-0.000014 rms=0.002807 Jy/beam ! Combined flux in latest and established models = 0.765077 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 80 components and 0.765077 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.405 mas, bmaj=23.13 mas, bpa=2.157 degrees ! Estimated noise=3724.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433425 Jy ! Component: 100 - total flux cleaned = 0.00552322 Jy ! Component: 150 - total flux cleaned = 0.00584306 Jy ! Component: 200 - total flux cleaned = 0.00606303 Jy ! Total flux subtracted in 200 components = 0.00606303 Jy ! Clean residual min=-0.011336 max=0.010658 Jy/beam ! Clean residual mean=-0.000020 rms=0.003686 Jy/beam ! Combined flux in latest and established models = 0.77114 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000272839 Jy ! Component: 100 - total flux cleaned = 0.000404582 Jy ! Component: 150 - total flux cleaned = 0.000593818 Jy ! Component: 200 - total flux cleaned = 0.000771754 Jy ! Total flux subtracted in 200 components = 0.000771754 Jy ! Clean residual min=-0.011265 max=0.010699 Jy/beam ! Clean residual mean=-0.000020 rms=0.003667 Jy/beam ! Combined flux in latest and established models = 0.771912 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 109 components and 0.771912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=16.83 mas, bpa=11.75 degrees ! Estimated noise=2998.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143346 Jy ! Component: 100 - total flux cleaned = 0.000497315 Jy ! Component: 150 - total flux cleaned = 0.000778792 Jy ! Component: 200 - total flux cleaned = 0.00101625 Jy ! Total flux subtracted in 200 components = 0.00101625 Jy ! Clean residual min=-0.011217 max=0.011611 Jy/beam ! Clean residual mean=-0.000015 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 0.772928 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 0.772928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295118Jy sigma=0.000699 ! Fit after self-cal, rms=0.295145Jy sigma=0.000699 wmodel J0536-3401_S_2015_01_23_pus_map.mod ! Writing 127 model components to file: J0536-3401_S_2015_01_23_pus_map.mod wobs J0536-3401_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0536-3401_S_2015_01_23_pus_uvs.fits wwins J0536-3401_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0536-3401_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271704 Jy ! Component: 100 - total flux cleaned = -0.00107661 Jy ! Component: 150 - total flux cleaned = -0.00152465 Jy ! Component: 200 - total flux cleaned = -0.00319856 Jy ! Component: 250 - total flux cleaned = -0.00412358 Jy ! Component: 300 - total flux cleaned = -0.00525306 Jy ! Component: 350 - total flux cleaned = -0.00609042 Jy ! Component: 400 - total flux cleaned = -0.00643456 Jy ! Component: 450 - total flux cleaned = -0.00654744 Jy ! Component: 500 - total flux cleaned = -0.00644023 Jy ! Component: 550 - total flux cleaned = -0.00654706 Jy ! Component: 600 - total flux cleaned = -0.00675055 Jy ! Component: 650 - total flux cleaned = -0.00674864 Jy ! Component: 700 - total flux cleaned = -0.00684715 Jy ! Component: 750 - total flux cleaned = -0.00722523 Jy ! Component: 800 - total flux cleaned = -0.00750262 Jy ! Component: 850 - total flux cleaned = -0.007955 Jy ! Component: 900 - total flux cleaned = -0.00804349 Jy ! Component: 950 - total flux cleaned = -0.00847714 Jy ! Component: 1000 - total flux cleaned = -0.0087319 Jy ! Component: 1050 - total flux cleaned = -0.00898057 Jy ! Component: 1100 - total flux cleaned = -0.0089001 Jy ! Component: 1150 - total flux cleaned = -0.0087416 Jy ! Component: 1200 - total flux cleaned = -0.00858531 Jy ! Component: 1250 - total flux cleaned = -0.00827928 Jy ! Component: 1300 - total flux cleaned = -0.00820321 Jy ! Component: 1350 - total flux cleaned = -0.0079801 Jy ! Component: 1400 - total flux cleaned = -0.00776099 Jy ! Component: 1450 - total flux cleaned = -0.0076885 Jy ! Component: 1500 - total flux cleaned = -0.00740222 Jy ! Component: 1550 - total flux cleaned = -0.00726117 Jy ! Component: 1600 - total flux cleaned = -0.0069832 Jy ! Component: 1650 - total flux cleaned = -0.00677763 Jy ! Component: 1700 - total flux cleaned = -0.00664222 Jy ! Component: 1750 - total flux cleaned = -0.00657432 Jy ! Component: 1800 - total flux cleaned = -0.00617694 Jy ! Component: 1850 - total flux cleaned = -0.00585038 Jy ! Component: 1900 - total flux cleaned = -0.00578636 Jy ! Component: 1950 - total flux cleaned = -0.00553074 Jy ! Component: 2000 - total flux cleaned = -0.0053407 Jy ! Component: 2050 - total flux cleaned = -0.0051536 Jy ! Component: 2100 - total flux cleaned = -0.00503061 Jy ! Component: 2150 - total flux cleaned = -0.00497012 Jy ! Component: 2200 - total flux cleaned = -0.00484844 Jy ! Component: 2250 - total flux cleaned = -0.00472789 Jy ! Component: 2300 - total flux cleaned = -0.00472822 Jy ! Component: 2350 - total flux cleaned = -0.00455043 Jy ! Component: 2400 - total flux cleaned = -0.00449124 Jy ! Component: 2450 - total flux cleaned = -0.00420075 Jy ! Component: 2500 - total flux cleaned = -0.00408619 Jy ! Component: 2550 - total flux cleaned = -0.00402923 Jy ! Component: 2600 - total flux cleaned = -0.00374551 Jy ! Component: 2650 - total flux cleaned = -0.00352066 Jy ! Component: 2700 - total flux cleaned = -0.00335371 Jy ! Component: 2750 - total flux cleaned = -0.00324329 Jy ! Component: 2800 - total flux cleaned = -0.00313324 Jy ! Component: 2850 - total flux cleaned = -0.00302328 Jy ! Component: 2900 - total flux cleaned = -0.00291445 Jy ! Component: 2950 - total flux cleaned = -0.00280638 Jy ! Component: 3000 - total flux cleaned = -0.0027528 Jy ! Component: 3050 - total flux cleaned = -0.0026992 Jy ! Component: 3100 - total flux cleaned = -0.00259325 Jy ! Component: 3150 - total flux cleaned = -0.00254062 Jy ! Component: 3200 - total flux cleaned = -0.00238234 Jy ! Component: 3250 - total flux cleaned = -0.00227707 Jy ! Component: 3300 - total flux cleaned = -0.00191103 Jy ! Component: 3350 - total flux cleaned = -0.00185912 Jy ! Component: 3400 - total flux cleaned = -0.00159948 Jy ! Component: 3450 - total flux cleaned = -0.00149607 Jy ! Component: 3500 - total flux cleaned = -0.00134145 Jy ! Component: 3550 - total flux cleaned = -0.00118736 Jy ! Component: 3600 - total flux cleaned = -0.00103358 Jy ! Component: 3650 - total flux cleaned = -0.000880396 Jy ! Component: 3700 - total flux cleaned = -0.000727778 Jy ! Component: 3750 - total flux cleaned = -0.000473923 Jy ! Component: 3800 - total flux cleaned = -0.000270878 Jy ! Component: 3850 - total flux cleaned = -0.000119567 Jy ! Component: 3900 - total flux cleaned = 3.16239e-05 Jy ! Component: 3950 - total flux cleaned = 8.1784e-05 Jy ! Component: 4000 - total flux cleaned = 0.000182763 Jy ! Component: 4050 - total flux cleaned = 0.000233204 Jy ! Total flux subtracted in 4096 components = 0.000182966 Jy ! Clean residual min=-0.002752 max=0.002858 Jy/beam ! Clean residual mean=-0.000004 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.773111 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 466 components and 0.773111 Jy ![Exited script file: muppet] wmap "J0536-3401_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.421 x 16.83 at 11.75 degrees (North through East) ! Clean map min=-0.0089913 max=0.6507 Jy/beam ! Writing clean map to FITS file: J0536-3401_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.650704 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000957057 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.441241 0.441241 0.882481 1.76496 3.52993 7.05985 14.1197 28.2394 56.4788 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.65 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.421 x 16.83 at 11.75 degrees (North through East) ! Clean map min=-0.0089913 max=0.6507 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0536-3401_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:06:33 2017