! Started logfile: J0536+0944_S_2014_08_09_pus_uvs.log on Tue Nov 29 22:55:53 2016 obs J0536+0944_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J0536+0944_S_2014_08_09_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.78103 visibilities/baseline/integration-bin. ! Found source: J0536+0944 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 17292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0536+0944_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995672Jy sigma=0.011053 ! Fit after self-cal, rms=0.964934Jy sigma=0.010724 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=8.782 mas, bpa=20.19 degrees ! Estimated noise=796.068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276961 Jy ! Component: 100 - total flux cleaned = 0.0352649 Jy ! Total flux subtracted in 100 components = 0.0352649 Jy ! Clean residual min=-0.004242 max=0.005230 Jy/beam ! Clean residual mean=-0.000036 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.0352649 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0352649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077388Jy sigma=0.000808 ! Fit after self-cal, rms=0.076110Jy sigma=0.000793 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.552 mas, bmaj=9.173 mas, bpa=18.33 degrees ! Estimated noise=491.674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848769 Jy ! Component: 100 - total flux cleaned = 0.0138195 Jy ! Component: 150 - total flux cleaned = 0.0176171 Jy ! Component: 200 - total flux cleaned = 0.0203554 Jy ! Total flux subtracted in 200 components = 0.0203554 Jy ! Clean residual min=-0.004386 max=0.007261 Jy/beam ! Clean residual mean=-0.000022 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.0556203 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 31 components and 0.0556203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074997Jy sigma=0.000780 ! Fit after self-cal, rms=0.074904Jy sigma=0.000778 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.34 HN 1.06 KP 1.10 ! LA 0.78 MK 1.00* NL 1.37 OV 1.72 ! PT 0.63 SC 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.58 HN 1.16 KP 1.05 ! LA 0.70 MK 1.00* NL 1.38 OV 1.64 ! PT 0.61 SC 1.23 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.68 HN 1.12 KP 0.90 ! LA 0.61 MK 1.00* NL 1.34 OV 1.62 ! PT 0.58 SC 1.29 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.43 HN 1.01 KP 0.83 ! LA 0.59 MK 1.00* NL 1.45 OV 1.59 ! PT 0.65 SC 1.16 ! ! ! Fit before self-cal, rms=0.074904Jy sigma=0.000778 ! Fit after self-cal, rms=0.096861Jy sigma=0.000755 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.829 mas, bmaj=9.564 mas, bpa=17.16 degrees ! Estimated noise=518.142 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659951 Jy ! Component: 100 - total flux cleaned = 0.00931785 Jy ! Component: 150 - total flux cleaned = 0.0095402 Jy ! Component: 200 - total flux cleaned = 0.00954 Jy ! Total flux subtracted in 200 components = 0.00954 Jy ! Clean residual min=-0.003476 max=0.005573 Jy/beam ! Clean residual mean=-0.000005 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.0651603 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0651603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096142Jy sigma=0.000748 ! Fit after self-cal, rms=0.097639Jy sigma=0.000738 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097639Jy sigma=0.000738 ! Fit after self-cal, rms=0.102410Jy sigma=0.000735 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.778 mas, bmaj=9.583 mas, bpa=17.08 degrees ! Estimated noise=517.311 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290623 Jy ! Component: 100 - total flux cleaned = 0.00325612 Jy ! Component: 150 - total flux cleaned = 0.00330316 Jy ! Component: 200 - total flux cleaned = 0.00330433 Jy ! Total flux subtracted in 200 components = 0.00330433 Jy ! Clean residual min=-0.002304 max=0.002943 Jy/beam ! Clean residual mean=-0.000000 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0684646 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.0684647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102275Jy sigma=0.000734 ! Fit after self-cal, rms=0.102349Jy sigma=0.000733 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-49, -127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221349 Jy ! Component: 100 - total flux cleaned = 0.00235149 Jy ! Component: 150 - total flux cleaned = 0.00219368 Jy ! Component: 200 - total flux cleaned = 0.00224092 Jy ! Total flux subtracted in 200 components = 0.00224092 Jy ! Clean residual min=-0.002361 max=0.002560 Jy/beam ! Clean residual mean=-0.000000 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0707056 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.0707056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102223Jy sigma=0.000732 ! Fit after self-cal, rms=0.101880Jy sigma=0.000731 ! Inverting map ! Added new window around map position (-108, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245029 Jy ! Component: 100 - total flux cleaned = 0.00302655 Jy ! Component: 150 - total flux cleaned = 0.00332117 Jy ! Component: 200 - total flux cleaned = 0.0034815 Jy ! Total flux subtracted in 200 components = 0.0034815 Jy ! Clean residual min=-0.002224 max=0.002119 Jy/beam ! Clean residual mean=-0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0741871 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 94 components and 0.074187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101731Jy sigma=0.000730 ! Fit after self-cal, rms=0.101374Jy sigma=0.000730 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101374Jy sigma=0.000730 ! Fit after self-cal, rms=0.094675Jy sigma=0.000729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.751 mas, bmaj=9.551 mas, bpa=17.23 degrees ! Estimated noise=503.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00202776 Jy ! Component: 100 - total flux cleaned = 0.00260222 Jy ! Component: 150 - total flux cleaned = 0.00284834 Jy ! Component: 200 - total flux cleaned = 0.00293302 Jy ! Total flux subtracted in 200 components = 0.00293302 Jy ! Clean residual min=-0.001952 max=0.001830 Jy/beam ! Clean residual mean=-0.000001 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0771201 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 114 components and 0.0771201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094589Jy sigma=0.000728 ! Fit after self-cal, rms=0.094230Jy sigma=0.000728 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953168 Jy ! Component: 100 - total flux cleaned = 0.00117793 Jy ! Component: 150 - total flux cleaned = 0.00117884 Jy ! Component: 200 - total flux cleaned = 0.001222 Jy ! Total flux subtracted in 200 components = 0.001222 Jy ! Clean residual min=-0.002057 max=0.002009 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0783421 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 125 components and 0.078342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094148Jy sigma=0.000727 ! Fit after self-cal, rms=0.093989Jy sigma=0.000727 ! Inverting map ! Added new window around map position (45, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000751537 Jy ! Component: 100 - total flux cleaned = 0.000748094 Jy ! Component: 150 - total flux cleaned = 0.000698406 Jy ! Component: 200 - total flux cleaned = 0.000605369 Jy ! Total flux subtracted in 200 components = 0.000605369 Jy ! Clean residual min=-0.001960 max=0.001685 Jy/beam ! Clean residual mean=-0.000002 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0789474 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 143 components and 0.0789474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093885Jy sigma=0.000726 ! Fit after self-cal, rms=0.093726Jy sigma=0.000726 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093726Jy sigma=0.000726 ! Fit after self-cal, rms=0.089588Jy sigma=0.000726 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=11.69 mas, bpa=3.491 degrees ! Estimated noise=533.902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103758 Jy ! Component: 100 - total flux cleaned = 0.00123699 Jy ! Component: 150 - total flux cleaned = 0.00135988 Jy ! Component: 200 - total flux cleaned = 0.00139515 Jy ! Total flux subtracted in 200 components = 0.00139515 Jy ! Clean residual min=-0.001647 max=0.001631 Jy/beam ! Clean residual mean=-0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0803426 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 174 components and 0.0803426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089535Jy sigma=0.000725 ! Fit after self-cal, rms=0.089334Jy sigma=0.000725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631232 Jy ! Component: 100 - total flux cleaned = 0.000721723 Jy ! Component: 150 - total flux cleaned = 0.000647126 Jy ! Component: 200 - total flux cleaned = 0.000504818 Jy ! Total flux subtracted in 200 components = 0.000504818 Jy ! Clean residual min=-0.001731 max=0.001584 Jy/beam ! Clean residual mean=-0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0808474 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 184 components and 0.0808474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089283Jy sigma=0.000724 ! Fit after self-cal, rms=0.089179Jy sigma=0.000724 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.725 mas, bmaj=9.544 mas, bpa=17.45 degrees ! Estimated noise=494.197 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.725 x 9.544 at 17.45 degrees (North through East) ! Clean map min=-0.0044717 max=0.040062 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=9.047 mas, bpa=19.7 degrees ! Estimated noise=817.556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294235 Jy ! Component: 100 - total flux cleaned = 0.0415074 Jy ! Component: 150 - total flux cleaned = 0.0495076 Jy ! Component: 200 - total flux cleaned = 0.0557254 Jy ! Total flux subtracted in 200 components = 0.0557254 Jy ! Clean residual min=-0.003538 max=0.004156 Jy/beam ! Clean residual mean=-0.000012 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.0557254 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0557254 Jy ! Inverting map and beam ! Estimated beam: bmin=4.725 mas, bmaj=9.544 mas, bpa=17.45 degrees ! Estimated noise=494.197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587209 Jy ! Component: 100 - total flux cleaned = 0.00926881 Jy ! Component: 150 - total flux cleaned = 0.0121365 Jy ! Component: 200 - total flux cleaned = 0.0146233 Jy ! Total flux subtracted in 200 components = 0.0146233 Jy ! Clean residual min=-0.003051 max=0.003189 Jy/beam ! Clean residual mean=-0.000001 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0703487 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 48 components and 0.0703487 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=11.69 mas, bpa=3.491 degrees ! Estimated noise=533.902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352733 Jy ! Component: 100 - total flux cleaned = 0.00534175 Jy ! Component: 150 - total flux cleaned = 0.00614785 Jy ! Component: 200 - total flux cleaned = 0.00685685 Jy ! Total flux subtracted in 200 components = 0.00685685 Jy ! Clean residual min=-0.002514 max=0.002300 Jy/beam ! Clean residual mean=-0.000002 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0772055 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358263 Jy ! Component: 100 - total flux cleaned = 0.00068415 Jy ! Component: 150 - total flux cleaned = 0.000804666 Jy ! Component: 200 - total flux cleaned = 0.000920666 Jy ! Total flux subtracted in 200 components = 0.000920666 Jy ! Clean residual min=-0.002295 max=0.002106 Jy/beam ! Clean residual mean=-0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0781262 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 106 components and 0.0781262 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.725 mas, bmaj=9.544 mas, bpa=17.45 degrees ! Estimated noise=494.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110414 Jy ! Component: 100 - total flux cleaned = -0.000111181 Jy ! Component: 150 - total flux cleaned = 8.8801e-05 Jy ! Component: 200 - total flux cleaned = 0.000213673 Jy ! Total flux subtracted in 200 components = 0.000213673 Jy ! Clean residual min=-0.002107 max=0.002118 Jy/beam ! Clean residual mean=-0.000001 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.0783399 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 0.0783399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089331Jy sigma=0.000726 ! Fit after self-cal, rms=0.089337Jy sigma=0.000725 wmodel J0536+0944_S_2014_08_09_pus_map.mod ! Writing 130 model components to file: J0536+0944_S_2014_08_09_pus_map.mod wobs J0536+0944_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J0536+0944_S_2014_08_09_pus_uvs.fits wwins J0536+0944_S_2014_08_09_pus_map.win ! wwins: Wrote 6 windows to J0536+0944_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429554 Jy ! Component: 100 - total flux cleaned = -0.000525156 Jy ! Component: 150 - total flux cleaned = -0.000354545 Jy ! Component: 200 - total flux cleaned = -0.000246425 Jy ! Component: 250 - total flux cleaned = -0.000144083 Jy ! Component: 300 - total flux cleaned = -0.000118779 Jy ! Component: 350 - total flux cleaned = -7.05092e-05 Jy ! Component: 400 - total flux cleaned = -1.00928e-06 Jy ! Component: 450 - total flux cleaned = -1.36302e-06 Jy ! Component: 500 - total flux cleaned = 4.26736e-05 Jy ! Component: 550 - total flux cleaned = 6.42308e-05 Jy ! Component: 600 - total flux cleaned = 0.000170068 Jy ! Component: 650 - total flux cleaned = 0.000315272 Jy ! Component: 700 - total flux cleaned = 0.000437043 Jy ! Component: 750 - total flux cleaned = 0.000517171 Jy ! Component: 800 - total flux cleaned = 0.000693012 Jy ! Component: 850 - total flux cleaned = 0.000808374 Jy ! Component: 900 - total flux cleaned = 0.000941063 Jy ! Component: 950 - total flux cleaned = 0.00105316 Jy ! Component: 1000 - total flux cleaned = 0.00112695 Jy ! Component: 1050 - total flux cleaned = 0.00119957 Jy ! Component: 1100 - total flux cleaned = 0.00121734 Jy ! Component: 1150 - total flux cleaned = 0.00132314 Jy ! Component: 1200 - total flux cleaned = 0.0013054 Jy ! Component: 1250 - total flux cleaned = 0.00135719 Jy ! Component: 1300 - total flux cleaned = 0.00135747 Jy ! Component: 1350 - total flux cleaned = 0.00140738 Jy ! Component: 1400 - total flux cleaned = 0.0013909 Jy ! Component: 1450 - total flux cleaned = 0.00139122 Jy ! Component: 1500 - total flux cleaned = 0.00137478 Jy ! Component: 1550 - total flux cleaned = 0.00132705 Jy ! Component: 1600 - total flux cleaned = 0.00127995 Jy ! Component: 1650 - total flux cleaned = 0.00126453 Jy ! Component: 1700 - total flux cleaned = 0.00124944 Jy ! Component: 1750 - total flux cleaned = 0.00124935 Jy ! Component: 1800 - total flux cleaned = 0.00118923 Jy ! Component: 1850 - total flux cleaned = 0.00118911 Jy ! Component: 1900 - total flux cleaned = 0.00111559 Jy ! Component: 1950 - total flux cleaned = 0.00110112 Jy ! Component: 2000 - total flux cleaned = 0.00102927 Jy ! Component: 2050 - total flux cleaned = 0.00104369 Jy ! Component: 2100 - total flux cleaned = 0.00101541 Jy ! Component: 2150 - total flux cleaned = 0.000959515 Jy ! Component: 2200 - total flux cleaned = 0.000945807 Jy ! Component: 2250 - total flux cleaned = 0.000945739 Jy ! Component: 2300 - total flux cleaned = 0.00090519 Jy ! Component: 2350 - total flux cleaned = 0.000878435 Jy ! Component: 2400 - total flux cleaned = 0.000904857 Jy ! Component: 2450 - total flux cleaned = 0.000865334 Jy ! Component: 2500 - total flux cleaned = 0.00087829 Jy ! Component: 2550 - total flux cleaned = 0.00083954 Jy ! Component: 2600 - total flux cleaned = 0.000813991 Jy ! Component: 2650 - total flux cleaned = 0.000788601 Jy ! Component: 2700 - total flux cleaned = 0.000700578 Jy ! Component: 2750 - total flux cleaned = 0.000688315 Jy ! Component: 2800 - total flux cleaned = 0.000651278 Jy ! Component: 2850 - total flux cleaned = 0.000663733 Jy ! Component: 2900 - total flux cleaned = 0.000627135 Jy ! Component: 2950 - total flux cleaned = 0.000578781 Jy ! Component: 3000 - total flux cleaned = 0.000566792 Jy ! Component: 3050 - total flux cleaned = 0.000554843 Jy ! Component: 3100 - total flux cleaned = 0.000531199 Jy ! Component: 3150 - total flux cleaned = 0.000484489 Jy ! Component: 3200 - total flux cleaned = 0.000484481 Jy ! Component: 3250 - total flux cleaned = 0.000484475 Jy ! Component: 3300 - total flux cleaned = 0.000438611 Jy ! Component: 3350 - total flux cleaned = 0.000393274 Jy ! Component: 3400 - total flux cleaned = 0.000393386 Jy ! Component: 3450 - total flux cleaned = 0.000371042 Jy ! Component: 3500 - total flux cleaned = 0.000393278 Jy ! Component: 3550 - total flux cleaned = 0.000327158 Jy ! Component: 3600 - total flux cleaned = 0.000338194 Jy ! Component: 3650 - total flux cleaned = 0.000359813 Jy ! Component: 3700 - total flux cleaned = 0.00029498 Jy ! Component: 3750 - total flux cleaned = 0.000316413 Jy ! Component: 3800 - total flux cleaned = 0.000295079 Jy ! Component: 3850 - total flux cleaned = 0.000305561 Jy ! Component: 3900 - total flux cleaned = 0.000252803 Jy ! Component: 3950 - total flux cleaned = 0.000221472 Jy ! Component: 4000 - total flux cleaned = 0.000231925 Jy ! Component: 4050 - total flux cleaned = 0.000221551 Jy ! Total flux subtracted in 4096 components = 0.000221525 Jy ! Clean residual min=-0.000609 max=0.000605 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0785614 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 398 components and 0.0785614 Jy ![Exited script file: muppet] wmap "J0536+0944_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.725 x 9.544 at 17.45 degrees (North through East) ! Clean map min=-0.0037418 max=0.039167 Jy/beam ! Writing clean map to FITS file: J0536+0944_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0391667 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193515 device "J0536+0944_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J0536+0944_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.48224 1.48224 2.96449 5.92897 11.8579 23.7159 47.4318 94.8636 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.725 x 9.544 at 17.45 degrees (North through East) ! Clean map min=-0.0037418 max=0.039167 Jy/beam quit ! Quitting program ! Log file J0536+0944_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 22:55:59 2016