! Started logfile: J0533+4210_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:17:54 2017 obs J0533+4210_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0533+4210_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0533+4210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0533+4210_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918895Jy sigma=0.014285 ! Fit after self-cal, rms=0.910529Jy sigma=0.014152 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=4.174 mas, bpa=61.79 degrees ! Estimated noise=1060.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0707614 Jy ! Component: 100 - total flux cleaned = 0.0865884 Jy ! Total flux subtracted in 100 components = 0.0865884 Jy ! Clean residual min=-0.007437 max=0.009206 Jy/beam ! Clean residual mean=0.000042 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 0.0865885 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0865885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071850Jy sigma=0.000967 ! Fit after self-cal, rms=0.071826Jy sigma=0.000967 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.272 mas, bmaj=5.04 mas, bpa=63.28 degrees ! Estimated noise=650.321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0068791 Jy ! Component: 100 - total flux cleaned = 0.0105355 Jy ! Component: 150 - total flux cleaned = 0.012467 Jy ! Component: 200 - total flux cleaned = 0.012888 Jy ! Total flux subtracted in 200 components = 0.012888 Jy ! Clean residual min=-0.007220 max=0.010652 Jy/beam ! Clean residual mean=0.000074 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 0.0994764 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.0994765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071030Jy sigma=0.000958 ! Fit after self-cal, rms=0.071062Jy sigma=0.000958 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 1.00 ! MK 0.97 NL 0.99 OV 1.05 PT 0.95 ! SC 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 0.97 ! MK 0.99 NL 0.98 OV 1.08 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.78 ! MK 1.01 NL 0.98 OV 1.00 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.83 ! MK 1.10 NL 1.07 OV 1.13 PT 0.95 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.071062Jy sigma=0.000958 ! Fit after self-cal, rms=0.067680Jy sigma=0.000942 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.252 mas, bmaj=5.065 mas, bpa=60.58 degrees ! Estimated noise=645.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00980999 Jy ! Component: 100 - total flux cleaned = 0.0114006 Jy ! Component: 150 - total flux cleaned = 0.0116883 Jy ! Component: 200 - total flux cleaned = 0.0121213 Jy ! Total flux subtracted in 200 components = 0.0121213 Jy ! Clean residual min=-0.005183 max=0.006198 Jy/beam ! Clean residual mean=0.000056 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.111598 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.111598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066281Jy sigma=0.000917 ! Fit after self-cal, rms=0.065782Jy sigma=0.000913 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065782Jy sigma=0.000913 ! Fit after self-cal, rms=0.064504Jy sigma=0.000910 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.196 mas, bmaj=5.034 mas, bpa=60.8 degrees ! Estimated noise=632.699 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183412 Jy ! Component: 100 - total flux cleaned = 0.00202242 Jy ! Component: 150 - total flux cleaned = 0.00168816 Jy ! Component: 200 - total flux cleaned = 0.00134078 Jy ! Total flux subtracted in 200 components = 0.00134078 Jy ! Clean residual min=-0.004311 max=0.005859 Jy/beam ! Clean residual mean=0.000040 rms=0.001250 Jy/beam ! Combined flux in latest and established models = 0.112939 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.112939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064321Jy sigma=0.000906 ! Fit after self-cal, rms=0.064283Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00590938 Jy ! Component: 100 - total flux cleaned = 0.00933422 Jy ! Component: 150 - total flux cleaned = 0.0117011 Jy ! Component: 200 - total flux cleaned = 0.0135202 Jy ! Total flux subtracted in 200 components = 0.0135202 Jy ! Clean residual min=-0.003297 max=0.003114 Jy/beam ! Clean residual mean=0.000035 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.126459 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 98 components and 0.126459 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063669Jy sigma=0.000897 ! Fit after self-cal, rms=0.063525Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063525Jy sigma=0.000896 ! Fit after self-cal, rms=0.062728Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.027 mas, bpa=60.81 degrees ! Estimated noise=625.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227438 Jy ! Component: 100 - total flux cleaned = 0.0027414 Jy ! Component: 150 - total flux cleaned = 0.00292716 Jy ! Component: 200 - total flux cleaned = 0.00313099 Jy ! Total flux subtracted in 200 components = 0.00313099 Jy ! Clean residual min=-0.002875 max=0.002550 Jy/beam ! Clean residual mean=0.000023 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.12959 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.12959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062614Jy sigma=0.000894 ! Fit after self-cal, rms=0.062556Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728446 Jy ! Component: 100 - total flux cleaned = 0.000765581 Jy ! Component: 150 - total flux cleaned = 0.000830545 Jy ! Component: 200 - total flux cleaned = 0.000830469 Jy ! Total flux subtracted in 200 components = 0.000830469 Jy ! Clean residual min=-0.002647 max=0.002595 Jy/beam ! Clean residual mean=0.000023 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.13042 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 133 components and 0.13042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062512Jy sigma=0.000893 ! Fit after self-cal, rms=0.062490Jy sigma=0.000893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062490Jy sigma=0.000893 ! Fit after self-cal, rms=0.062328Jy sigma=0.000892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.239 mas, bmaj=9.675 mas, bpa=45.44 degrees ! Estimated noise=726.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000419957 Jy ! Component: 100 - total flux cleaned = 0.000455811 Jy ! Component: 150 - total flux cleaned = 0.000452157 Jy ! Component: 200 - total flux cleaned = 0.000402298 Jy ! Total flux subtracted in 200 components = 0.000402298 Jy ! Clean residual min=-0.002910 max=0.003101 Jy/beam ! Clean residual mean=0.000037 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.130822 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 0.130822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062305Jy sigma=0.000892 ! Fit after self-cal, rms=0.062282Jy sigma=0.000892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115205 Jy ! Component: 100 - total flux cleaned = 6.43822e-05 Jy ! Component: 150 - total flux cleaned = 4.50292e-05 Jy ! Component: 200 - total flux cleaned = 4.49104e-05 Jy ! Total flux subtracted in 200 components = 4.49104e-05 Jy ! Clean residual min=-0.002851 max=0.002967 Jy/beam ! Clean residual mean=0.000037 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.130867 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 160 components and 0.130867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062277Jy sigma=0.000892 ! Fit after self-cal, rms=0.062266Jy sigma=0.000892 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.031 mas, bpa=60.57 degrees ! Estimated noise=624.505 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 5.031 at 60.57 degrees (North through East) ! Clean map min=-0.0037919 max=0.086793 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.345 mas, bmaj=4.162 mas, bpa=59.09 degrees ! Estimated noise=1006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0668299 Jy ! Component: 100 - total flux cleaned = 0.0845817 Jy ! Component: 150 - total flux cleaned = 0.0951277 Jy ! Component: 200 - total flux cleaned = 0.102451 Jy ! Total flux subtracted in 200 components = 0.102451 Jy ! Clean residual min=-0.005519 max=0.005613 Jy/beam ! Clean residual mean=0.000017 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.102451 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.102451 Jy ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.031 mas, bpa=60.57 degrees ! Estimated noise=624.505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708259 Jy ! Component: 100 - total flux cleaned = 0.0122609 Jy ! Component: 150 - total flux cleaned = 0.0153475 Jy ! Component: 200 - total flux cleaned = 0.0177061 Jy ! Total flux subtracted in 200 components = 0.0177061 Jy ! Clean residual min=-0.003735 max=0.003410 Jy/beam ! Clean residual mean=0.000026 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.120157 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 65 components and 0.120157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.239 mas, bmaj=9.675 mas, bpa=45.44 degrees ! Estimated noise=726.963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364088 Jy ! Component: 100 - total flux cleaned = 0.00572675 Jy ! Component: 150 - total flux cleaned = 0.00690133 Jy ! Component: 200 - total flux cleaned = 0.00769661 Jy ! Total flux subtracted in 200 components = 0.00769661 Jy ! Clean residual min=-0.003217 max=0.002856 Jy/beam ! Clean residual mean=0.000041 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.127854 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000598253 Jy ! Component: 100 - total flux cleaned = 0.00114473 Jy ! Component: 150 - total flux cleaned = 0.0015212 Jy ! Component: 200 - total flux cleaned = 0.00184306 Jy ! Total flux subtracted in 200 components = 0.00184306 Jy ! Clean residual min=-0.003074 max=0.002806 Jy/beam ! Clean residual mean=0.000039 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.129697 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 134 components and 0.129697 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.193 mas, bmaj=5.031 mas, bpa=60.57 degrees ! Estimated noise=624.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136379 Jy ! Component: 100 - total flux cleaned = 0.000298971 Jy ! Component: 150 - total flux cleaned = 0.000394271 Jy ! Component: 200 - total flux cleaned = 0.000478635 Jy ! Total flux subtracted in 200 components = 0.000478635 Jy ! Clean residual min=-0.002587 max=0.002383 Jy/beam ! Clean residual mean=0.000019 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.130176 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 152 components and 0.130176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062297Jy sigma=0.000892 ! Fit after self-cal, rms=0.062279Jy sigma=0.000892 wmodel J0533+4210_S_2014_01_04_pus_map.mod ! Writing 152 model components to file: J0533+4210_S_2014_01_04_pus_map.mod wobs J0533+4210_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0533+4210_S_2014_01_04_pus_uvs.fits wwins J0533+4210_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0533+4210_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000343952 Jy ! Component: 100 - total flux cleaned = -0.00049891 Jy ! Component: 150 - total flux cleaned = -0.000430865 Jy ! Component: 200 - total flux cleaned = -0.000463624 Jy ! Component: 250 - total flux cleaned = -0.000463833 Jy ! Component: 300 - total flux cleaned = -0.00040328 Jy ! Component: 350 - total flux cleaned = -0.000346349 Jy ! Component: 400 - total flux cleaned = -0.000346202 Jy ! Component: 450 - total flux cleaned = -0.000346543 Jy ! Component: 500 - total flux cleaned = -0.0003715 Jy ! Component: 550 - total flux cleaned = -0.000345945 Jy ! Component: 600 - total flux cleaned = -0.000392735 Jy ! Component: 650 - total flux cleaned = -0.000391931 Jy ! Component: 700 - total flux cleaned = -0.000391763 Jy ! Component: 750 - total flux cleaned = -0.000413106 Jy ! Component: 800 - total flux cleaned = -0.000413284 Jy ! Component: 850 - total flux cleaned = -0.000433236 Jy ! Component: 900 - total flux cleaned = -0.000432928 Jy ! Component: 950 - total flux cleaned = -0.000413767 Jy ! Component: 1000 - total flux cleaned = -0.000451823 Jy ! Component: 1050 - total flux cleaned = -0.000451356 Jy ! Component: 1100 - total flux cleaned = -0.000469341 Jy ! Component: 1150 - total flux cleaned = -0.000504597 Jy ! Component: 1200 - total flux cleaned = -0.000487065 Jy ! Component: 1250 - total flux cleaned = -0.000470112 Jy ! Component: 1300 - total flux cleaned = -0.000503658 Jy ! Component: 1350 - total flux cleaned = -0.000487222 Jy ! Component: 1400 - total flux cleaned = -0.00050322 Jy ! Component: 1450 - total flux cleaned = -0.000518963 Jy ! Component: 1500 - total flux cleaned = -0.000518913 Jy ! Component: 1550 - total flux cleaned = -0.000488194 Jy ! Component: 1600 - total flux cleaned = -0.000488361 Jy ! Component: 1650 - total flux cleaned = -0.000503059 Jy ! Component: 1700 - total flux cleaned = -0.000502907 Jy ! Component: 1750 - total flux cleaned = -0.00048858 Jy ! Component: 1800 - total flux cleaned = -0.000502461 Jy ! Component: 1850 - total flux cleaned = -0.000488438 Jy ! Component: 1900 - total flux cleaned = -0.000461485 Jy ! Component: 1950 - total flux cleaned = -0.000488027 Jy ! Component: 2000 - total flux cleaned = -0.000461692 Jy ! Component: 2050 - total flux cleaned = -0.000423013 Jy ! Component: 2100 - total flux cleaned = -0.000435954 Jy ! Component: 2150 - total flux cleaned = -0.000423326 Jy ! Component: 2200 - total flux cleaned = -0.000410951 Jy ! Component: 2250 - total flux cleaned = -0.000423155 Jy ! Component: 2300 - total flux cleaned = -0.000387329 Jy ! Component: 2350 - total flux cleaned = -0.000399071 Jy ! Component: 2400 - total flux cleaned = -0.000410751 Jy ! Component: 2450 - total flux cleaned = -0.000410732 Jy ! Component: 2500 - total flux cleaned = -0.000433542 Jy ! Component: 2550 - total flux cleaned = -0.000444793 Jy ! Component: 2600 - total flux cleaned = -0.000467238 Jy ! Component: 2650 - total flux cleaned = -0.000489297 Jy ! Component: 2700 - total flux cleaned = -0.00053255 Jy ! Component: 2750 - total flux cleaned = -0.000532496 Jy ! Component: 2800 - total flux cleaned = -0.000553815 Jy ! Component: 2850 - total flux cleaned = -0.000574812 Jy ! Component: 2900 - total flux cleaned = -0.000564486 Jy ! Component: 2950 - total flux cleaned = -0.000574794 Jy ! Component: 3000 - total flux cleaned = -0.000595057 Jy ! Component: 3050 - total flux cleaned = -0.000564814 Jy ! Component: 3100 - total flux cleaned = -0.000545001 Jy ! Component: 3150 - total flux cleaned = -0.000545071 Jy ! Component: 3200 - total flux cleaned = -0.000525493 Jy ! Component: 3250 - total flux cleaned = -0.000506054 Jy ! Component: 3300 - total flux cleaned = -0.000486757 Jy ! Component: 3350 - total flux cleaned = -0.000458003 Jy ! Component: 3400 - total flux cleaned = -0.000419864 Jy ! Component: 3450 - total flux cleaned = -0.000391319 Jy ! Component: 3500 - total flux cleaned = -0.00032521 Jy ! Component: 3550 - total flux cleaned = -0.000296985 Jy ! Component: 3600 - total flux cleaned = -0.000250179 Jy ! Component: 3650 - total flux cleaned = -0.00023143 Jy ! Component: 3700 - total flux cleaned = -0.000184831 Jy ! Component: 3750 - total flux cleaned = -0.000157022 Jy ! Component: 3800 - total flux cleaned = -0.000138546 Jy ! Component: 3850 - total flux cleaned = -0.000101667 Jy ! Component: 3900 - total flux cleaned = -8.32637e-05 Jy ! Component: 3950 - total flux cleaned = -7.40659e-05 Jy ! Component: 4000 - total flux cleaned = -3.74362e-05 Jy ! Component: 4050 - total flux cleaned = -1.0046e-05 Jy ! Total flux subtracted in 4096 components = -8.51686e-07 Jy ! Clean residual min=-0.000673 max=0.000518 Jy/beam ! Clean residual mean=0.000001 rms=0.000152 Jy/beam ! Combined flux in latest and established models = 0.130175 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 391 components and 0.130175 Jy ![Exited script file: muppet] wmap "J0533+4210_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 5.031 at 60.57 degrees (North through East) ! Clean map min=-0.0030728 max=0.086189 Jy/beam ! Writing clean map to FITS file: J0533+4210_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0861893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145265 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.505625 0.505625 1.01125 2.0225 4.045 8.09 16.18 32.36 64.72 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.193 x 5.031 at 60.57 degrees (North through East) ! Clean map min=-0.0030728 max=0.086189 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0533+4210_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:17:59 2017