! Started logfile: J0526+6317_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:06:17 2017 obs J0526+6317_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0526+6317_S_2015_01_23_pus_uva.fits ! AN table 1: 156 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712251 visibilities/baseline/integration-bin. ! Found source: J0526+6317 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 20000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0526+6317_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 348 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.996455Jy sigma=0.011051 ! Fit after self-cal, rms=0.953470Jy sigma=0.010686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.803 mas, bmaj=4.466 mas, bpa=-51.43 degrees ! Estimated noise=802.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386119 Jy ! Component: 100 - total flux cleaned = 0.0470489 Jy ! Total flux subtracted in 100 components = 0.0470489 Jy ! Clean residual min=-0.003282 max=0.003033 Jy/beam ! Clean residual mean=0.000003 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0470489 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0470489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123787Jy sigma=0.000766 ! Fit after self-cal, rms=0.123515Jy sigma=0.000762 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=5.317 mas, bpa=-51 degrees ! Estimated noise=480.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035238 Jy ! Component: 100 - total flux cleaned = 0.00522269 Jy ! Component: 150 - total flux cleaned = 0.00626314 Jy ! Component: 200 - total flux cleaned = 0.00694257 Jy ! Total flux subtracted in 200 components = 0.00694257 Jy ! Clean residual min=-0.002235 max=0.002185 Jy/beam ! Clean residual mean=0.000019 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0539915 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.0539915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123256Jy sigma=0.000761 ! Fit after self-cal, rms=0.123262Jy sigma=0.000761 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.44 HN 0.98 KP 1.03 ! LA 1.13 MK 1.14 NL 0.99 OV 1.01 ! PT 1.06 SC 0.94 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.45 HN 0.99 KP 1.09 ! LA 1.04 MK 1.03 NL 0.97 OV 1.00 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.59 HN 1.02 KP 0.89 ! LA 0.95 MK 1.13 NL 1.20 OV 0.89 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.54 HN 0.92 KP 0.86 ! LA 0.96 MK 1.02 NL 0.95 OV 1.13 ! PT 1.05 SC 0.94 ! ! ! Fit before self-cal, rms=0.123262Jy sigma=0.000761 ! Fit after self-cal, rms=0.083865Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=5.33 mas, bpa=-51.66 degrees ! Estimated noise=478.285 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68922e-05 Jy ! Component: 100 - total flux cleaned = 0.000113125 Jy ! Component: 150 - total flux cleaned = 0.000171063 Jy ! Component: 200 - total flux cleaned = 0.000237276 Jy ! Total flux subtracted in 200 components = 0.000237276 Jy ! Clean residual min=-0.001701 max=0.001630 Jy/beam ! Clean residual mean=0.000014 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0542287 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 26 components and 0.0542287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083859Jy sigma=0.000758 ! Fit after self-cal, rms=0.083698Jy sigma=0.000757 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083698Jy sigma=0.000757 ! Fit after self-cal, rms=0.084126Jy sigma=0.000756 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=5.356 mas, bpa=-51.08 degrees ! Estimated noise=477.986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012744 Jy ! Component: 100 - total flux cleaned = 0.00012873 Jy ! Component: 150 - total flux cleaned = 0.000138834 Jy ! Component: 200 - total flux cleaned = 0.000129728 Jy ! Total flux subtracted in 200 components = 0.000129728 Jy ! Clean residual min=-0.001344 max=0.001353 Jy/beam ! Clean residual mean=-0.000003 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0543585 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0543585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084123Jy sigma=0.000756 ! Fit after self-cal, rms=0.084233Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68294e-05 Jy ! Component: 100 - total flux cleaned = 0.000103687 Jy ! Component: 150 - total flux cleaned = 0.000119054 Jy ! Component: 200 - total flux cleaned = 0.000133325 Jy ! Total flux subtracted in 200 components = 0.000133325 Jy ! Clean residual min=-0.001329 max=0.001386 Jy/beam ! Clean residual mean=0.000000 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0544918 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.0544918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084232Jy sigma=0.000756 ! Fit after self-cal, rms=0.084225Jy sigma=0.000756 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084225Jy sigma=0.000756 ! Fit after self-cal, rms=0.084888Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=5.374 mas, bpa=-50.81 degrees ! Estimated noise=478.103 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.50455e-05 Jy ! Component: 100 - total flux cleaned = 8.49134e-05 Jy ! Component: 150 - total flux cleaned = 9.30524e-05 Jy ! Component: 200 - total flux cleaned = 0.000115562 Jy ! Total flux subtracted in 200 components = 0.000115562 Jy ! Clean residual min=-0.001306 max=0.001383 Jy/beam ! Clean residual mean=-0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0546074 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0546074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084886Jy sigma=0.000755 ! Fit after self-cal, rms=0.084911Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.38672e-05 Jy ! Component: 100 - total flux cleaned = 3.83118e-05 Jy ! Component: 150 - total flux cleaned = 5.1716e-05 Jy ! Component: 200 - total flux cleaned = 6.40695e-05 Jy ! Total flux subtracted in 200 components = 6.40695e-05 Jy ! Clean residual min=-0.001297 max=0.001402 Jy/beam ! Clean residual mean=-0.000003 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0546714 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0546714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084910Jy sigma=0.000755 ! Fit after self-cal, rms=0.084911Jy sigma=0.000755 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084911Jy sigma=0.000755 ! Fit after self-cal, rms=0.085106Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=8.983 mas, bpa=-76.09 degrees ! Estimated noise=608.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.07498e-05 Jy ! Component: 100 - total flux cleaned = 9.12943e-05 Jy ! Component: 150 - total flux cleaned = 0.000104039 Jy ! Component: 200 - total flux cleaned = 0.000119743 Jy ! Total flux subtracted in 200 components = 0.000119743 Jy ! Clean residual min=-0.001347 max=0.001578 Jy/beam ! Clean residual mean=-0.000007 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0547912 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0547912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085105Jy sigma=0.000755 ! Fit after self-cal, rms=0.085113Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.00822e-05 Jy ! Component: 100 - total flux cleaned = -3.9059e-06 Jy ! Component: 150 - total flux cleaned = 6.80727e-06 Jy ! Component: 200 - total flux cleaned = 1.49041e-05 Jy ! Total flux subtracted in 200 components = 1.49041e-05 Jy ! Clean residual min=-0.001344 max=0.001581 Jy/beam ! Clean residual mean=-0.000007 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0548061 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0548061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085113Jy sigma=0.000755 ! Fit after self-cal, rms=0.085113Jy sigma=0.000755 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=5.387 mas, bpa=-50.6 degrees ! Estimated noise=478.046 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 5.387 at -50.6 degrees (North through East) ! Clean map min=-0.0012222 max=0.049225 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.82 mas, bmaj=4.522 mas, bpa=-50.83 degrees ! Estimated noise=747.286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385896 Jy ! Component: 100 - total flux cleaned = 0.0470671 Jy ! Component: 150 - total flux cleaned = 0.0498073 Jy ! Component: 200 - total flux cleaned = 0.051347 Jy ! Total flux subtracted in 200 components = 0.051347 Jy ! Clean residual min=-0.002482 max=0.002295 Jy/beam ! Clean residual mean=-0.000003 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.051347 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.051347 Jy ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=5.387 mas, bpa=-50.6 degrees ! Estimated noise=478.046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152818 Jy ! Component: 100 - total flux cleaned = 0.00233578 Jy ! Component: 150 - total flux cleaned = 0.00261102 Jy ! Component: 200 - total flux cleaned = 0.00275059 Jy ! Total flux subtracted in 200 components = 0.00275059 Jy ! Clean residual min=-0.001384 max=0.001407 Jy/beam ! Clean residual mean=-0.000004 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0540976 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.0540976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.602 mas, bmaj=8.983 mas, bpa=-76.09 degrees ! Estimated noise=608.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497856 Jy ! Component: 100 - total flux cleaned = 0.000552017 Jy ! Component: 150 - total flux cleaned = 0.000578297 Jy ! Component: 200 - total flux cleaned = 0.000596081 Jy ! Total flux subtracted in 200 components = 0.000596081 Jy ! Clean residual min=-0.001355 max=0.001598 Jy/beam ! Clean residual mean=-0.000007 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0546937 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03424e-05 Jy ! Component: 100 - total flux cleaned = 2.53206e-05 Jy ! Component: 150 - total flux cleaned = 3.45024e-05 Jy ! Component: 200 - total flux cleaned = 4.7693e-05 Jy ! Total flux subtracted in 200 components = 4.7693e-05 Jy ! Clean residual min=-0.001352 max=0.001587 Jy/beam ! Clean residual mean=-0.000007 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.0547414 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0547414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.487 mas, bmaj=5.387 mas, bpa=-50.6 degrees ! Estimated noise=478.046 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.83323e-05 Jy ! Component: 100 - total flux cleaned = 1.13444e-05 Jy ! Component: 150 - total flux cleaned = -2.28592e-06 Jy ! Component: 200 - total flux cleaned = -2.05586e-06 Jy ! Total flux subtracted in 200 components = -2.05586e-06 Jy ! Clean residual min=-0.001321 max=0.001425 Jy/beam ! Clean residual mean=-0.000003 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0547393 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.0547393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085116Jy sigma=0.000755 ! Fit after self-cal, rms=0.085116Jy sigma=0.000755 wmodel J0526+6317_S_2015_01_23_pus_map.mod ! Writing 35 model components to file: J0526+6317_S_2015_01_23_pus_map.mod wobs J0526+6317_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0526+6317_S_2015_01_23_pus_uvs.fits wwins J0526+6317_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0526+6317_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157742 Jy ! Component: 100 - total flux cleaned = 0.000182055 Jy ! Component: 150 - total flux cleaned = 0.00018159 Jy ! Component: 200 - total flux cleaned = 0.000117607 Jy ! Component: 250 - total flux cleaned = 0.000137674 Jy ! Component: 300 - total flux cleaned = 0.000217811 Jy ! Component: 350 - total flux cleaned = 0.000257236 Jy ! Component: 400 - total flux cleaned = 0.00031428 Jy ! Component: 450 - total flux cleaned = 0.000276415 Jy ! Component: 500 - total flux cleaned = 0.000221369 Jy ! Component: 550 - total flux cleaned = 0.000203278 Jy ! Component: 600 - total flux cleaned = 0.000221055 Jy ! Component: 650 - total flux cleaned = 0.000168212 Jy ! Component: 700 - total flux cleaned = 0.00016813 Jy ! Component: 750 - total flux cleaned = 0.000133707 Jy ! Component: 800 - total flux cleaned = 9.98369e-05 Jy ! Component: 850 - total flux cleaned = 5.02419e-05 Jy ! Component: 900 - total flux cleaned = 5.03293e-05 Jy ! Component: 950 - total flux cleaned = 8.30336e-05 Jy ! Component: 1000 - total flux cleaned = 0.00013119 Jy ! Component: 1050 - total flux cleaned = 0.000194599 Jy ! Component: 1100 - total flux cleaned = 0.000210219 Jy ! Component: 1150 - total flux cleaned = 0.000225404 Jy ! Component: 1200 - total flux cleaned = 0.000286735 Jy ! Component: 1250 - total flux cleaned = 0.000301709 Jy ! Component: 1300 - total flux cleaned = 0.000361624 Jy ! Component: 1350 - total flux cleaned = 0.000361661 Jy ! Component: 1400 - total flux cleaned = 0.000405719 Jy ! Component: 1450 - total flux cleaned = 0.000376507 Jy ! Component: 1500 - total flux cleaned = 0.000434469 Jy ! Component: 1550 - total flux cleaned = 0.000477234 Jy ! Component: 1600 - total flux cleaned = 0.000420618 Jy ! Component: 1650 - total flux cleaned = 0.000518683 Jy ! Component: 1700 - total flux cleaned = 0.000574249 Jy ! Component: 1750 - total flux cleaned = 0.000546841 Jy ! Component: 1800 - total flux cleaned = 0.000629108 Jy ! Component: 1850 - total flux cleaned = 0.000683177 Jy ! Component: 1900 - total flux cleaned = 0.000656351 Jy ! Component: 1950 - total flux cleaned = 0.000749595 Jy ! Component: 2000 - total flux cleaned = 0.000776013 Jy ! Component: 2050 - total flux cleaned = 0.000789184 Jy ! Component: 2100 - total flux cleaned = 0.000854093 Jy ! Component: 2150 - total flux cleaned = 0.000866883 Jy ! Component: 2200 - total flux cleaned = 0.000918087 Jy ! Component: 2250 - total flux cleaned = 0.00096881 Jy ! Component: 2300 - total flux cleaned = 0.00101922 Jy ! Component: 2350 - total flux cleaned = 0.00109396 Jy ! Component: 2400 - total flux cleaned = 0.00113101 Jy ! Component: 2450 - total flux cleaned = 0.00111866 Jy ! Component: 2500 - total flux cleaned = 0.00115511 Jy ! Component: 2550 - total flux cleaned = 0.00119129 Jy ! Component: 2600 - total flux cleaned = 0.00114325 Jy ! Component: 2650 - total flux cleaned = 0.00119103 Jy ! Component: 2700 - total flux cleaned = 0.00119091 Jy ! Component: 2750 - total flux cleaned = 0.0012498 Jy ! Component: 2800 - total flux cleaned = 0.00122636 Jy ! Component: 2850 - total flux cleaned = 0.00126129 Jy ! Component: 2900 - total flux cleaned = 0.00126137 Jy ! Component: 2950 - total flux cleaned = 0.00128413 Jy ! Component: 3000 - total flux cleaned = 0.0013183 Jy ! Component: 3050 - total flux cleaned = 0.00129564 Jy ! Component: 3100 - total flux cleaned = 0.0013292 Jy ! Component: 3150 - total flux cleaned = 0.00131805 Jy ! Component: 3200 - total flux cleaned = 0.00132928 Jy ! Component: 3250 - total flux cleaned = 0.00137329 Jy ! Component: 3300 - total flux cleaned = 0.00135147 Jy ! Component: 3350 - total flux cleaned = 0.00135143 Jy ! Component: 3400 - total flux cleaned = 0.00140547 Jy ! Component: 3450 - total flux cleaned = 0.00139472 Jy ! Component: 3500 - total flux cleaned = 0.00137334 Jy ! Component: 3550 - total flux cleaned = 0.00142651 Jy ! Component: 3600 - total flux cleaned = 0.00140524 Jy ! Component: 3650 - total flux cleaned = 0.0014262 Jy ! Component: 3700 - total flux cleaned = 0.00141577 Jy ! Component: 3750 - total flux cleaned = 0.00138472 Jy ! Component: 3800 - total flux cleaned = 0.00140533 Jy ! Component: 3850 - total flux cleaned = 0.00138475 Jy ! Component: 3900 - total flux cleaned = 0.00135412 Jy ! Component: 3950 - total flux cleaned = 0.00135421 Jy ! Component: 4000 - total flux cleaned = 0.00137447 Jy ! Component: 4050 - total flux cleaned = 0.00138447 Jy ! Total flux subtracted in 4096 components = 0.00141441 Jy ! Clean residual min=-0.000648 max=0.000663 Jy/beam ! Clean residual mean=-0.000001 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0561537 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 330 components and 0.0561537 Jy ![Exited script file: muppet] wmap "J0526+6317_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 5.387 at -50.6 degrees (North through East) ! Clean map min=-0.00091541 max=0.049158 Jy/beam ! Writing clean map to FITS file: J0526+6317_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0491577 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000177446 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08292 1.08292 2.16584 4.33168 8.66337 17.3267 34.6535 69.307 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.487 x 5.387 at -50.6 degrees (North through East) ! Clean map min=-0.00091541 max=0.049158 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0526+6317_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:06:22 2017