! Started logfile: J0524-3126_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:16:55 2016
obs J0524-3126_S_2014_08_05_pus_uva.fits
! Reading UV FITS file: J0524-3126_S_2014_08_05_pus_uva.fits
! AN table 1: 121 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.781084 visibilities/baseline/integration-bin.
! Found source: J0524-3126
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 360 lines of history.
! 
! Reading 17012 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0524-3126_S_2014_08_05_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001120Jy  sigma=0.008022
! Fit after  self-cal, rms=0.950303Jy  sigma=0.007617
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.097 mas, bmaj=14.51 mas, bpa=13.3 degrees
! Estimated noise=1449.87 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0411771 Jy
! Component: 100  -  total flux cleaned = 0.0510943 Jy
! Total flux subtracted in 100 components = 0.0510943 Jy
! Clean residual min=-0.005753 max=0.007628 Jy/beam
! Clean residual mean=-0.000006 rms=0.001657 Jy/beam
! Combined flux in latest and established models = 0.0510943 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0510943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105413Jy  sigma=0.000771
! Fit after  self-cal, rms=0.103952Jy  sigma=0.000759
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.829 mas, bmaj=16.9 mas, bpa=12.85 degrees
! Estimated noise=690.43 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0088572 Jy
! Component: 100  -  total flux cleaned = 0.0132387 Jy
! Component: 150  -  total flux cleaned = 0.0156105 Jy
! Component: 200  -  total flux cleaned = 0.0164437 Jy
! Total flux subtracted in 200 components = 0.0164437 Jy
! Clean residual min=-0.002533 max=0.004195 Jy/beam
! Clean residual mean=-0.000008 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.067538 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 41 components and 0.067538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103254Jy  sigma=0.000753
! Fit after  self-cal, rms=0.103125Jy  sigma=0.000752
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.87     HN        0.94     KP        1.03     
!   LA        1.07     MK        1.00*    NL        1.07     OV        1.04     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.01     HN        0.86     KP        0.98     
!   LA        1.08     MK        1.00*    NL        1.11     OV        1.11     
!   PT        1.00     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.06     HN        0.93     KP        0.89     
!   LA        0.88     MK        1.00*    NL        1.09     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        0.90     KP        0.94     
!   LA        0.86     MK        1.00*    NL        1.17     OV        1.07     
!   PT        1.01     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.103125Jy  sigma=0.000752
! Fit after  self-cal, rms=0.099389Jy  sigma=0.000750
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.832 mas, bmaj=16.92 mas, bpa=12.62 degrees
! Estimated noise=680.05 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-20, -16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042417 Jy
! Component: 100  -  total flux cleaned = 0.00692086 Jy
! Component: 150  -  total flux cleaned = 0.00867232 Jy
! Component: 200  -  total flux cleaned = 0.00952535 Jy
! Total flux subtracted in 200 components = 0.00952535 Jy
! Clean residual min=-0.002016 max=0.002153 Jy/beam
! Clean residual mean=-0.000002 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.0770633 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 77 components and 0.0770633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099186Jy  sigma=0.000748
! Fit after  self-cal, rms=0.098994Jy  sigma=0.000747
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098994Jy  sigma=0.000747
! Fit after  self-cal, rms=0.098590Jy  sigma=0.000747
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.813 mas, bmaj=16.85 mas, bpa=12.57 degrees
! Estimated noise=677.259 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00282349 Jy
! Component: 100  -  total flux cleaned = 0.00474586 Jy
! Component: 150  -  total flux cleaned = 0.00574456 Jy
! Component: 200  -  total flux cleaned = 0.00608316 Jy
! Total flux subtracted in 200 components = 0.00608316 Jy
! Clean residual min=-0.001976 max=0.002095 Jy/beam
! Clean residual mean=0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0831465 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 102 components and 0.0831465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098486Jy  sigma=0.000746
! Fit after  self-cal, rms=0.098398Jy  sigma=0.000746
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27.5, 113.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212285 Jy
! Component: 100  -  total flux cleaned = 0.00291777 Jy
! Component: 150  -  total flux cleaned = 0.00327039 Jy
! Component: 200  -  total flux cleaned = 0.00354587 Jy
! Total flux subtracted in 200 components = 0.00354587 Jy
! Clean residual min=-0.001957 max=0.001930 Jy/beam
! Clean residual mean=-0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.0866923 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 121 components and 0.0866923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098318Jy  sigma=0.000745
! Fit after  self-cal, rms=0.098272Jy  sigma=0.000745
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098272Jy  sigma=0.000745
! Fit after  self-cal, rms=0.097246Jy  sigma=0.000745
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.792 mas, bmaj=16.81 mas, bpa=12.48 degrees
! Estimated noise=672.51 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171446 Jy
! Component: 100  -  total flux cleaned = 0.0023438 Jy
! Component: 150  -  total flux cleaned = 0.00289108 Jy
! Component: 200  -  total flux cleaned = 0.00341285 Jy
! Total flux subtracted in 200 components = 0.00341285 Jy
! Clean residual min=-0.001873 max=0.001678 Jy/beam
! Clean residual mean=-0.000003 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0901052 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 138 components and 0.0901052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097193Jy  sigma=0.000744
! Fit after  self-cal, rms=0.097150Jy  sigma=0.000744
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00067252 Jy
! Component: 100  -  total flux cleaned = 0.0011663 Jy
! Component: 150  -  total flux cleaned = 0.00148737 Jy
! Component: 200  -  total flux cleaned = 0.00173745 Jy
! Total flux subtracted in 200 components = 0.00173745 Jy
! Clean residual min=-0.001878 max=0.001770 Jy/beam
! Clean residual mean=-0.000003 rms=0.000466 Jy/beam
! Combined flux in latest and established models = 0.0918426 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 148 components and 0.0918426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097112Jy  sigma=0.000744
! Fit after  self-cal, rms=0.097085Jy  sigma=0.000744
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097085Jy  sigma=0.000744
! Fit after  self-cal, rms=0.096244Jy  sigma=0.000744
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.017 mas, bmaj=24.43 mas, bpa=3.834 degrees
! Estimated noise=775.438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00083244 Jy
! Component: 100  -  total flux cleaned = 0.00121951 Jy
! Component: 150  -  total flux cleaned = 0.00134413 Jy
! Component: 200  -  total flux cleaned = 0.00151076 Jy
! Total flux subtracted in 200 components = 0.00151076 Jy
! Clean residual min=-0.001767 max=0.001824 Jy/beam
! Clean residual mean=-0.000004 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.0933534 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 171 components and 0.0933534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096226Jy  sigma=0.000744
! Fit after  self-cal, rms=0.096219Jy  sigma=0.000743
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000224079 Jy
! Component: 100  -  total flux cleaned = 0.000316326 Jy
! Component: 150  -  total flux cleaned = 0.000425121 Jy
! Component: 200  -  total flux cleaned = 0.000593325 Jy
! Total flux subtracted in 200 components = 0.000593325 Jy
! Clean residual min=-0.001756 max=0.001903 Jy/beam
! Clean residual mean=-0.000003 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.0939467 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 179 components and 0.0939467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096209Jy  sigma=0.000743
! Fit after  self-cal, rms=0.096210Jy  sigma=0.000743
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.782 mas, bmaj=16.73 mas, bpa=12.42 degrees
! Estimated noise=669.097 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.782 x 16.73 at 12.42 degrees (North through East)
! Clean map  min=-0.0025409  max=0.056348 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=14.35 mas, bpa=12.71 degrees
! Estimated noise=1385.5 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0402647 Jy
! Component: 100  -  total flux cleaned = 0.0525698 Jy
! Component: 150  -  total flux cleaned = 0.0606008 Jy
! Component: 200  -  total flux cleaned = 0.0664833 Jy
! Total flux subtracted in 200 components = 0.0664833 Jy
! Clean residual min=-0.005371 max=0.005064 Jy/beam
! Clean residual mean=-0.000003 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.0664833 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0664833 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.782 mas, bmaj=16.73 mas, bpa=12.42 degrees
! Estimated noise=669.097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00749227 Jy
! Component: 100  -  total flux cleaned = 0.0125461 Jy
! Component: 150  -  total flux cleaned = 0.0158451 Jy
! Component: 200  -  total flux cleaned = 0.0181003 Jy
! Total flux subtracted in 200 components = 0.0181003 Jy
! Clean residual min=-0.002589 max=0.002215 Jy/beam
! Clean residual mean=-0.000008 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.0845836 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 84 components and 0.0845836 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.017 mas, bmaj=24.43 mas, bpa=3.834 degrees
! Estimated noise=775.438 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269242 Jy
! Component: 100  -  total flux cleaned = 0.00411646 Jy
! Component: 150  -  total flux cleaned = 0.00530035 Jy
! Component: 200  -  total flux cleaned = 0.00638437 Jy
! Total flux subtracted in 200 components = 0.00638437 Jy
! Clean residual min=-0.002080 max=0.001983 Jy/beam
! Clean residual mean=-0.000006 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.0909679 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000806585 Jy
! Component: 100  -  total flux cleaned = 0.00128164 Jy
! Component: 150  -  total flux cleaned = 0.00170369 Jy
! Component: 200  -  total flux cleaned = 0.00204731 Jy
! Total flux subtracted in 200 components = 0.00204731 Jy
! Clean residual min=-0.001931 max=0.001895 Jy/beam
! Clean residual mean=-0.000003 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.0930153 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 146 components and 0.0930153 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.782 mas, bmaj=16.73 mas, bpa=12.42 degrees
! Estimated noise=669.097 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000788771 Jy
! Component: 100  -  total flux cleaned = 0.00107525 Jy
! Component: 150  -  total flux cleaned = 0.0012045 Jy
! Component: 200  -  total flux cleaned = 0.00132429 Jy
! Total flux subtracted in 200 components = 0.00132429 Jy
! Clean residual min=-0.001844 max=0.001734 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.0943395 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 175 components and 0.0943395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096204Jy  sigma=0.000743
! Fit after  self-cal, rms=0.096174Jy  sigma=0.000743
wmodel J0524-3126_S_2014_08_05_pus_map.mod
! Writing 175 model components to file: J0524-3126_S_2014_08_05_pus_map.mod
wobs J0524-3126_S_2014_08_05_pus_uvs.fits
! Writing UV FITS file: J0524-3126_S_2014_08_05_pus_uvs.fits
wwins J0524-3126_S_2014_08_05_pus_map.win
! wwins: Wrote 4 windows to J0524-3126_S_2014_08_05_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000853002 Jy
! Component: 100  -  total flux cleaned = -0.00124612 Jy
! Component: 150  -  total flux cleaned = -0.00135839 Jy
! Component: 200  -  total flux cleaned = -0.00149258 Jy
! Component: 250  -  total flux cleaned = -0.00172412 Jy
! Component: 300  -  total flux cleaned = -0.00184864 Jy
! Component: 350  -  total flux cleaned = -0.00196866 Jy
! Component: 400  -  total flux cleaned = -0.00203871 Jy
! Component: 450  -  total flux cleaned = -0.00219749 Jy
! Component: 500  -  total flux cleaned = -0.0023743 Jy
! Component: 550  -  total flux cleaned = -0.00256764 Jy
! Component: 600  -  total flux cleaned = -0.00273522 Jy
! Component: 650  -  total flux cleaned = -0.00285837 Jy
! Component: 700  -  total flux cleaned = -0.00295957 Jy
! Component: 750  -  total flux cleaned = -0.00305851 Jy
! Component: 800  -  total flux cleaned = -0.00317492 Jy
! Component: 850  -  total flux cleaned = -0.00326964 Jy
! Component: 900  -  total flux cleaned = -0.0033815 Jy
! Component: 950  -  total flux cleaned = -0.00345473 Jy
! Component: 1000  -  total flux cleaned = -0.00352701 Jy
! Component: 1050  -  total flux cleaned = -0.00366878 Jy
! Component: 1100  -  total flux cleaned = -0.00379068 Jy
! Component: 1150  -  total flux cleaned = -0.00391043 Jy
! Component: 1200  -  total flux cleaned = -0.00397808 Jy
! Component: 1250  -  total flux cleaned = -0.00414476 Jy
! Component: 1300  -  total flux cleaned = -0.00417783 Jy
! Component: 1350  -  total flux cleaned = -0.00422656 Jy
! Component: 1400  -  total flux cleaned = -0.00417879 Jy
! Component: 1450  -  total flux cleaned = -0.00416316 Jy
! Component: 1500  -  total flux cleaned = -0.004179 Jy
! Component: 1550  -  total flux cleaned = -0.0041482 Jy
! Component: 1600  -  total flux cleaned = -0.00414836 Jy
! Component: 1650  -  total flux cleaned = -0.00416345 Jy
! Component: 1700  -  total flux cleaned = -0.0041184 Jy
! Component: 1750  -  total flux cleaned = -0.00410368 Jy
! Component: 1800  -  total flux cleaned = -0.0040743 Jy
! Component: 1850  -  total flux cleaned = -0.00403098 Jy
! Component: 1900  -  total flux cleaned = -0.00398795 Jy
! Component: 1950  -  total flux cleaned = -0.00395934 Jy
! Component: 2000  -  total flux cleaned = -0.00395941 Jy
! Component: 2050  -  total flux cleaned = -0.00394524 Jy
! Component: 2100  -  total flux cleaned = -0.00387621 Jy
! Component: 2150  -  total flux cleaned = -0.00390394 Jy
! Component: 2200  -  total flux cleaned = -0.00389054 Jy
! Component: 2250  -  total flux cleaned = -0.00389047 Jy
! Component: 2300  -  total flux cleaned = -0.00387707 Jy
! Component: 2350  -  total flux cleaned = -0.00385088 Jy
! Component: 2400  -  total flux cleaned = -0.00385085 Jy
! Component: 2450  -  total flux cleaned = -0.00386388 Jy
! Component: 2500  -  total flux cleaned = -0.00382541 Jy
! Component: 2550  -  total flux cleaned = -0.0038254 Jy
! Component: 2600  -  total flux cleaned = -0.00385067 Jy
! Component: 2650  -  total flux cleaned = -0.00388828 Jy
! Component: 2700  -  total flux cleaned = -0.00383837 Jy
! Component: 2750  -  total flux cleaned = -0.00386318 Jy
! Component: 2800  -  total flux cleaned = -0.00386319 Jy
! Component: 2850  -  total flux cleaned = -0.00385081 Jy
! Component: 2900  -  total flux cleaned = -0.0038388 Jy
! Component: 2950  -  total flux cleaned = -0.00385088 Jy
! Component: 3000  -  total flux cleaned = -0.00380319 Jy
! Component: 3050  -  total flux cleaned = -0.00385038 Jy
! Component: 3100  -  total flux cleaned = -0.003815 Jy
! Component: 3150  -  total flux cleaned = -0.00380313 Jy
! Component: 3200  -  total flux cleaned = -0.00378004 Jy
! Component: 3250  -  total flux cleaned = -0.0038031 Jy
! Component: 3300  -  total flux cleaned = -0.00378027 Jy
! Component: 3350  -  total flux cleaned = -0.00379164 Jy
! Component: 3400  -  total flux cleaned = -0.00375789 Jy
! Component: 3450  -  total flux cleaned = -0.0037355 Jy
! Component: 3500  -  total flux cleaned = -0.003702 Jy
! Component: 3550  -  total flux cleaned = -0.00372409 Jy
! Component: 3600  -  total flux cleaned = -0.0037022 Jy
! Component: 3650  -  total flux cleaned = -0.00368035 Jy
! Component: 3700  -  total flux cleaned = -0.00363711 Jy
! Component: 3750  -  total flux cleaned = -0.00364786 Jy
! Component: 3800  -  total flux cleaned = -0.00365849 Jy
! Component: 3850  -  total flux cleaned = -0.00365842 Jy
! Component: 3900  -  total flux cleaned = -0.00366898 Jy
! Component: 3950  -  total flux cleaned = -0.00366892 Jy
! Component: 4000  -  total flux cleaned = -0.00368987 Jy
! Component: 4050  -  total flux cleaned = -0.00372111 Jy
! Total flux subtracted in 4096 components = -0.00369002 Jy
! Clean residual min=-0.000560 max=0.000597 Jy/beam
! Clean residual mean=0.000003 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.0906495 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 452 components and 0.0906495 Jy
![Exited script file: muppet]
wmap "J0524-3126_S_2014_08_05_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.782 x 16.73 at 12.42 degrees (North through East)
! Clean map  min=-0.0025726  max=0.054281 Jy/beam
! Writing clean map to FITS file: J0524-3126_S_2014_08_05_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.054281 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000203674 
device "J0524-3126_S_2014_08_05_pus\_map.eps/VPS"
! Attempting to open device: 'J0524-3126_S_2014_08_05_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.12567 1.12567 2.25133 4.50267 9.00533 18.0107 36.0213 72.0427
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.054 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.782 x 16.73 at 12.42 degrees (North through East)
! Clean map  min=-0.0025726  max=0.054281 Jy/beam
quit
! Quitting program
! Log file J0524-3126_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:17:01 2016