! Started logfile: J0523+4113_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:17:49 2017 obs J0523+4113_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0523+4113_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0523+4113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0523+4113_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.844741Jy sigma=0.013099 ! Fit after self-cal, rms=0.834330Jy sigma=0.012951 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=4.183 mas, bpa=54.23 degrees ! Estimated noise=984.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125679 Jy ! Component: 100 - total flux cleaned = 0.153882 Jy ! Total flux subtracted in 100 components = 0.153882 Jy ! Clean residual min=-0.008891 max=0.009586 Jy/beam ! Clean residual mean=0.000024 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.153882 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.153882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073965Jy sigma=0.000996 ! Fit after self-cal, rms=0.073943Jy sigma=0.000996 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.254 mas, bmaj=5.016 mas, bpa=55.79 degrees ! Estimated noise=650.996 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145438 Jy ! Component: 100 - total flux cleaned = 0.0223185 Jy ! Component: 150 - total flux cleaned = 0.0273461 Jy ! Component: 200 - total flux cleaned = 0.0306308 Jy ! Total flux subtracted in 200 components = 0.0306308 Jy ! Clean residual min=-0.006223 max=0.008839 Jy/beam ! Clean residual mean=0.000025 rms=0.001841 Jy/beam ! Combined flux in latest and established models = 0.184513 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.184513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070138Jy sigma=0.000962 ! Fit after self-cal, rms=0.070185Jy sigma=0.000961 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* KP 1.00* LA 0.98 ! MK 0.98 NL 0.96 OV 0.99 PT 0.99 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 0.95 ! MK 0.99 NL 1.02 OV 0.98 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* KP 1.00* LA 0.81 ! MK 1.02 NL 0.99 OV 0.89 PT 0.98 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.00* KP 1.00* LA 0.89 ! MK 1.02 NL 1.12 OV 0.94 PT 0.97 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.070185Jy sigma=0.000961 ! Fit after self-cal, rms=0.065930Jy sigma=0.000917 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.283 mas, bmaj=5.033 mas, bpa=54.11 degrees ! Estimated noise=651.306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615452 Jy ! Component: 100 - total flux cleaned = 0.00832181 Jy ! Component: 150 - total flux cleaned = 0.0089365 Jy ! Component: 200 - total flux cleaned = 0.00906083 Jy ! Total flux subtracted in 200 components = 0.00906083 Jy ! Clean residual min=-0.003091 max=0.003370 Jy/beam ! Clean residual mean=0.000005 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.193573 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.193573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065335Jy sigma=0.000908 ! Fit after self-cal, rms=0.065018Jy sigma=0.000907 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065018Jy sigma=0.000907 ! Fit after self-cal, rms=0.065005Jy sigma=0.000905 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.291 mas, bmaj=5.008 mas, bpa=55.43 degrees ! Estimated noise=650.597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000578413 Jy ! Component: 100 - total flux cleaned = 0.000759246 Jy ! Component: 150 - total flux cleaned = 0.000796066 Jy ! Component: 200 - total flux cleaned = 0.000828112 Jy ! Total flux subtracted in 200 components = 0.000828112 Jy ! Clean residual min=-0.002498 max=0.002278 Jy/beam ! Clean residual mean=0.000006 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.194402 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.194402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064932Jy sigma=0.000904 ! Fit after self-cal, rms=0.064923Jy sigma=0.000904 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019971 Jy ! Component: 100 - total flux cleaned = 0.000113659 Jy ! Component: 150 - total flux cleaned = 6.14103e-05 Jy ! Component: 200 - total flux cleaned = 3.57351e-05 Jy ! Total flux subtracted in 200 components = 3.57351e-05 Jy ! Clean residual min=-0.002308 max=0.002239 Jy/beam ! Clean residual mean=0.000005 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.194437 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.194437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064895Jy sigma=0.000904 ! Fit after self-cal, rms=0.064897Jy sigma=0.000904 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064897Jy sigma=0.000904 ! Fit after self-cal, rms=0.064832Jy sigma=0.000904 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.29 mas, bmaj=5.002 mas, bpa=55.64 degrees ! Estimated noise=649.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.3917e-05 Jy ! Component: 100 - total flux cleaned = -0.000134474 Jy ! Component: 150 - total flux cleaned = -0.00017925 Jy ! Component: 200 - total flux cleaned = -0.000242141 Jy ! Total flux subtracted in 200 components = -0.000242141 Jy ! Clean residual min=-0.002180 max=0.002130 Jy/beam ! Clean residual mean=0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.194195 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.194195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064812Jy sigma=0.000904 ! Fit after self-cal, rms=0.064808Jy sigma=0.000904 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8344e-05 Jy ! Component: 100 - total flux cleaned = -4.8017e-05 Jy ! Component: 150 - total flux cleaned = -0.000104711 Jy ! Component: 200 - total flux cleaned = -0.000140812 Jy ! Total flux subtracted in 200 components = -0.000140812 Jy ! Clean residual min=-0.002080 max=0.002124 Jy/beam ! Clean residual mean=0.000003 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.194054 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.194054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064795Jy sigma=0.000903 ! Fit after self-cal, rms=0.064798Jy sigma=0.000903 ! Inverting map ! Added new window around map position (113.5, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133851 Jy ! Component: 100 - total flux cleaned = 0.00110785 Jy ! Component: 150 - total flux cleaned = 0.000923068 Jy ! Component: 200 - total flux cleaned = 0.000893128 Jy ! Total flux subtracted in 200 components = 0.000893128 Jy ! Clean residual min=-0.001921 max=0.001820 Jy/beam ! Clean residual mean=0.000003 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.194948 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.194948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064727Jy sigma=0.000903 ! Fit after self-cal, rms=0.064723Jy sigma=0.000903 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064723Jy sigma=0.000903 ! Fit after self-cal, rms=0.064672Jy sigma=0.000903 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.274 mas, bmaj=9.678 mas, bpa=39.82 degrees ! Estimated noise=748.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000329331 Jy ! Component: 100 - total flux cleaned = 0.000402641 Jy ! Component: 150 - total flux cleaned = 0.000317827 Jy ! Component: 200 - total flux cleaned = 0.000303468 Jy ! Total flux subtracted in 200 components = 0.000303468 Jy ! Clean residual min=-0.001552 max=0.001550 Jy/beam ! Clean residual mean=0.000005 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.195251 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 0.195251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064659Jy sigma=0.000902 ! Fit after self-cal, rms=0.064655Jy sigma=0.000902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.76646e-05 Jy ! Component: 100 - total flux cleaned = 0.00020141 Jy ! Component: 150 - total flux cleaned = 0.00022963 Jy ! Component: 200 - total flux cleaned = 0.000281722 Jy ! Total flux subtracted in 200 components = 0.000281722 Jy ! Clean residual min=-0.001517 max=0.001491 Jy/beam ! Clean residual mean=0.000004 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.195533 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.195533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064650Jy sigma=0.000902 ! Fit after self-cal, rms=0.064651Jy sigma=0.000902 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.287 mas, bmaj=5.007 mas, bpa=55.49 degrees ! Estimated noise=649.4 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.287 x 5.007 at 55.49 degrees (North through East) ! Clean map min=-0.0016945 max=0.16287 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=4.167 mas, bpa=53.52 degrees ! Estimated noise=994.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126938 Jy ! Component: 100 - total flux cleaned = 0.155823 Jy ! Component: 150 - total flux cleaned = 0.167293 Jy ! Component: 200 - total flux cleaned = 0.174486 Jy ! Total flux subtracted in 200 components = 0.174486 Jy ! Clean residual min=-0.004472 max=0.004792 Jy/beam ! Clean residual mean=0.000012 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.174486 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.174486 Jy ! Inverting map and beam ! Estimated beam: bmin=4.287 mas, bmaj=5.007 mas, bpa=55.49 degrees ! Estimated noise=649.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568714 Jy ! Component: 100 - total flux cleaned = 0.00938193 Jy ! Component: 150 - total flux cleaned = 0.0121057 Jy ! Component: 200 - total flux cleaned = 0.014199 Jy ! Total flux subtracted in 200 components = 0.014199 Jy ! Clean residual min=-0.002027 max=0.002161 Jy/beam ! Clean residual mean=0.000006 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.188685 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.188685 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.274 mas, bmaj=9.678 mas, bpa=39.82 degrees ! Estimated noise=748.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209804 Jy ! Component: 100 - total flux cleaned = 0.00352885 Jy ! Component: 150 - total flux cleaned = 0.00431782 Jy ! Component: 200 - total flux cleaned = 0.00476889 Jy ! Total flux subtracted in 200 components = 0.00476889 Jy ! Clean residual min=-0.001591 max=0.001410 Jy/beam ! Clean residual mean=0.000006 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.193454 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364062 Jy ! Component: 100 - total flux cleaned = 0.000617492 Jy ! Component: 150 - total flux cleaned = 0.000775067 Jy ! Component: 200 - total flux cleaned = 0.000844249 Jy ! Total flux subtracted in 200 components = 0.000844249 Jy ! Clean residual min=-0.001466 max=0.001427 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.194299 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 97 components and 0.194299 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.287 mas, bmaj=5.007 mas, bpa=55.49 degrees ! Estimated noise=649.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167822 Jy ! Component: 100 - total flux cleaned = -0.000168769 Jy ! Component: 150 - total flux cleaned = -0.000137925 Jy ! Component: 200 - total flux cleaned = -0.000195498 Jy ! Total flux subtracted in 200 components = -0.000195498 Jy ! Clean residual min=-0.001749 max=0.001576 Jy/beam ! Clean residual mean=0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.194103 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 118 components and 0.194103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064676Jy sigma=0.000902 ! Fit after self-cal, rms=0.064682Jy sigma=0.000902 wmodel J0523+4113_S_2014_01_04_pus_map.mod ! Writing 118 model components to file: J0523+4113_S_2014_01_04_pus_map.mod wobs J0523+4113_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0523+4113_S_2014_01_04_pus_uvs.fits wwins J0523+4113_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0523+4113_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308507 Jy ! Component: 100 - total flux cleaned = -0.000281003 Jy ! Component: 150 - total flux cleaned = -0.000201928 Jy ! Component: 200 - total flux cleaned = -0.000151526 Jy ! Component: 250 - total flux cleaned = 1.84978e-05 Jy ! Component: 300 - total flux cleaned = 0.000182233 Jy ! Component: 350 - total flux cleaned = 0.000318178 Jy ! Component: 400 - total flux cleaned = 0.00042786 Jy ! Component: 450 - total flux cleaned = 0.000491839 Jy ! Component: 500 - total flux cleaned = 0.000574469 Jy ! Component: 550 - total flux cleaned = 0.000634498 Jy ! Component: 600 - total flux cleaned = 0.000732549 Jy ! Component: 650 - total flux cleaned = 0.000865447 Jy ! Component: 700 - total flux cleaned = 0.000902342 Jy ! Component: 750 - total flux cleaned = 0.00103037 Jy ! Component: 800 - total flux cleaned = 0.00113744 Jy ! Component: 850 - total flux cleaned = 0.00117226 Jy ! Component: 900 - total flux cleaned = 0.00125775 Jy ! Component: 950 - total flux cleaned = 0.00129132 Jy ! Component: 1000 - total flux cleaned = 0.0013902 Jy ! Component: 1050 - total flux cleaned = 0.00143886 Jy ! Component: 1100 - total flux cleaned = 0.00150261 Jy ! Component: 1150 - total flux cleaned = 0.00161203 Jy ! Component: 1200 - total flux cleaned = 0.00164276 Jy ! Component: 1250 - total flux cleaned = 0.00168851 Jy ! Component: 1300 - total flux cleaned = 0.00177824 Jy ! Component: 1350 - total flux cleaned = 0.00179278 Jy ! Component: 1400 - total flux cleaned = 0.00183644 Jy ! Component: 1450 - total flux cleaned = 0.00183644 Jy ! Component: 1500 - total flux cleaned = 0.00185053 Jy ! Component: 1550 - total flux cleaned = 0.00193362 Jy ! Component: 1600 - total flux cleaned = 0.00196093 Jy ! Component: 1650 - total flux cleaned = 0.00197429 Jy ! Component: 1700 - total flux cleaned = 0.00197433 Jy ! Component: 1750 - total flux cleaned = 0.00201373 Jy ! Component: 1800 - total flux cleaned = 0.00203966 Jy ! Component: 1850 - total flux cleaned = 0.00206553 Jy ! Component: 1900 - total flux cleaned = 0.00209064 Jy ! Component: 1950 - total flux cleaned = 0.00205329 Jy ! Component: 2000 - total flux cleaned = 0.00209013 Jy ! Component: 2050 - total flux cleaned = 0.00209008 Jy ! Component: 2100 - total flux cleaned = 0.00213792 Jy ! Component: 2150 - total flux cleaned = 0.00212582 Jy ! Component: 2200 - total flux cleaned = 0.00214938 Jy ! Component: 2250 - total flux cleaned = 0.00214939 Jy ! Component: 2300 - total flux cleaned = 0.00220693 Jy ! Component: 2350 - total flux cleaned = 0.00222982 Jy ! Component: 2400 - total flux cleaned = 0.00224117 Jy ! Component: 2450 - total flux cleaned = 0.00230811 Jy ! Component: 2500 - total flux cleaned = 0.00233019 Jy ! Component: 2550 - total flux cleaned = 0.00234123 Jy ! Component: 2600 - total flux cleaned = 0.00237372 Jy ! Component: 2650 - total flux cleaned = 0.0023952 Jy ! Component: 2700 - total flux cleaned = 0.00246976 Jy ! Component: 2750 - total flux cleaned = 0.00244851 Jy ! Component: 2800 - total flux cleaned = 0.00247992 Jy ! Component: 2850 - total flux cleaned = 0.00251092 Jy ! Component: 2900 - total flux cleaned = 0.00255202 Jy ! Component: 2950 - total flux cleaned = 0.00256214 Jy ! Component: 3000 - total flux cleaned = 0.00259241 Jy ! Component: 3050 - total flux cleaned = 0.00260228 Jy ! Component: 3100 - total flux cleaned = 0.00261218 Jy ! Component: 3150 - total flux cleaned = 0.00267139 Jy ! Component: 3200 - total flux cleaned = 0.00269095 Jy ! Component: 3250 - total flux cleaned = 0.00271043 Jy ! Component: 3300 - total flux cleaned = 0.00273939 Jy ! Component: 3350 - total flux cleaned = 0.00277782 Jy ! Component: 3400 - total flux cleaned = 0.0028063 Jy ! Component: 3450 - total flux cleaned = 0.00285361 Jy ! Component: 3500 - total flux cleaned = 0.00284413 Jy ! Component: 3550 - total flux cleaned = 0.00290014 Jy ! Component: 3600 - total flux cleaned = 0.00291867 Jy ! Component: 3650 - total flux cleaned = 0.00291866 Jy ! Component: 3700 - total flux cleaned = 0.00295522 Jy ! Component: 3750 - total flux cleaned = 0.00296433 Jy ! Component: 3800 - total flux cleaned = 0.00296435 Jy ! Component: 3850 - total flux cleaned = 0.00299134 Jy ! Component: 3900 - total flux cleaned = 0.00302705 Jy ! Component: 3950 - total flux cleaned = 0.00305368 Jy ! Component: 4000 - total flux cleaned = 0.00308901 Jy ! Component: 4050 - total flux cleaned = 0.00308022 Jy ! Total flux subtracted in 4096 components = 0.00311523 Jy ! Clean residual min=-0.000610 max=0.000493 Jy/beam ! Clean residual mean=0.000001 rms=0.000150 Jy/beam ! Combined flux in latest and established models = 0.197218 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 342 components and 0.197218 Jy ![Exited script file: muppet] wmap "J0523+4113_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.287 x 5.007 at 55.49 degrees (North through East) ! Clean map min=-0.0013158 max=0.16449 Jy/beam ! Writing clean map to FITS file: J0523+4113_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164488 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000149144 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.272014 0.272014 0.544028 1.08806 2.17611 4.35223 8.70446 17.4089 34.8178 69.6356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.287 x 5.007 at 55.49 degrees (North through East) ! Clean map min=-0.0013158 max=0.16449 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0523+4113_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:17:53 2017