! Started logfile: J0518+2054_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:06:00 2017 obs J0518+2054_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0518+2054_S_2015_01_23_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.809962 visibilities/baseline/integration-bin. ! Found source: J0518+2054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 4228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0518+2054_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.756212Jy sigma=0.009606 ! Fit after self-cal, rms=0.743810Jy sigma=0.009557 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=6.331 mas, bpa=-4.992 degrees ! Estimated noise=1081.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.206565 Jy ! Component: 100 - total flux cleaned = 0.252221 Jy ! Total flux subtracted in 100 components = 0.252221 Jy ! Clean residual min=-0.013330 max=0.017699 Jy/beam ! Clean residual mean=-0.000000 rms=0.003565 Jy/beam ! Combined flux in latest and established models = 0.252221 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.252221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180379Jy sigma=0.001136 ! Fit after self-cal, rms=0.180380Jy sigma=0.001136 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=7.017 mas, bpa=-4.259 degrees ! Estimated noise=912.323 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190097 Jy ! Component: 100 - total flux cleaned = 0.0290824 Jy ! Component: 150 - total flux cleaned = 0.0349284 Jy ! Component: 200 - total flux cleaned = 0.0386258 Jy ! Total flux subtracted in 200 components = 0.0386258 Jy ! Clean residual min=-0.012891 max=0.018679 Jy/beam ! Clean residual mean=0.000010 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 0.290847 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 43 components and 0.290847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176939Jy sigma=0.001114 ! Fit after self-cal, rms=0.176942Jy sigma=0.001114 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.92 KP 1.06 ! LA 0.98 MK 0.99 NL 1.17 OV 0.96 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.82 HN 1.01 KP 1.00 ! LA 0.94 MK 0.99 NL 1.36 OV 0.98 ! PT 0.99 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.74 HN 0.99 KP 0.87 ! LA 0.76 MK 1.04 NL 1.84 OV 0.90 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 HN 0.93 KP 0.79 ! LA 0.79 MK 1.00 NL 1.07 OV 0.98 ! PT 1.00 SC 1.01 ! ! ! Fit before self-cal, rms=0.176942Jy sigma=0.001114 ! Fit after self-cal, rms=0.152706Jy sigma=0.000868 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.125 mas, bmaj=7.092 mas, bpa=-4.124 degrees ! Estimated noise=915.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125075 Jy ! Component: 100 - total flux cleaned = 0.00164294 Jy ! Component: 150 - total flux cleaned = 0.00180407 Jy ! Component: 200 - total flux cleaned = 0.00194311 Jy ! Total flux subtracted in 200 components = 0.00194311 Jy ! Clean residual min=-0.007614 max=0.006665 Jy/beam ! Clean residual mean=0.000002 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.29279 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.29279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152605Jy sigma=0.000868 ! Fit after self-cal, rms=0.152703Jy sigma=0.000867 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152703Jy sigma=0.000867 ! Fit after self-cal, rms=0.145661Jy sigma=0.000792 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.077 mas, bpa=-3.93 degrees ! Estimated noise=913.493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103236 Jy ! Component: 100 - total flux cleaned = -0.000993959 Jy ! Component: 150 - total flux cleaned = -0.000889237 Jy ! Component: 200 - total flux cleaned = -0.000858799 Jy ! Total flux subtracted in 200 components = -0.000858799 Jy ! Clean residual min=-0.003054 max=0.004844 Jy/beam ! Clean residual mean=0.000002 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.291931 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.291931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145642Jy sigma=0.000792 ! Fit after self-cal, rms=0.145625Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040744 Jy ! Component: 100 - total flux cleaned = 0.00556418 Jy ! Component: 150 - total flux cleaned = 0.0060394 Jy ! Component: 200 - total flux cleaned = 0.006292 Jy ! Total flux subtracted in 200 components = 0.006292 Jy ! Clean residual min=-0.002784 max=0.003207 Jy/beam ! Clean residual mean=-0.000000 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.298223 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 79 components and 0.298223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145428Jy sigma=0.000788 ! Fit after self-cal, rms=0.145428Jy sigma=0.000788 ! Inverting map ! Added new window around map position (30, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285418 Jy ! Component: 100 - total flux cleaned = 0.00356347 Jy ! Component: 150 - total flux cleaned = 0.00404304 Jy ! Component: 200 - total flux cleaned = 0.00422929 Jy ! Total flux subtracted in 200 components = 0.00422929 Jy ! Clean residual min=-0.002475 max=0.002581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.302453 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.302453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145320Jy sigma=0.000786 ! Fit after self-cal, rms=0.145312Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145312Jy sigma=0.000786 ! Fit after self-cal, rms=0.145541Jy sigma=0.000786 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.126 mas, bmaj=7.079 mas, bpa=-3.923 degrees ! Estimated noise=912.458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174385 Jy ! Component: 100 - total flux cleaned = 0.00222573 Jy ! Component: 150 - total flux cleaned = 0.00243422 Jy ! Component: 200 - total flux cleaned = 0.0025479 Jy ! Total flux subtracted in 200 components = 0.0025479 Jy ! Clean residual min=-0.002407 max=0.002488 Jy/beam ! Clean residual mean=-0.000001 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.305001 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.305001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145479Jy sigma=0.000785 ! Fit after self-cal, rms=0.145478Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676496 Jy ! Component: 100 - total flux cleaned = 0.000784075 Jy ! Component: 150 - total flux cleaned = 0.000883374 Jy ! Component: 200 - total flux cleaned = 0.000975794 Jy ! Total flux subtracted in 200 components = 0.000975794 Jy ! Clean residual min=-0.002397 max=0.002469 Jy/beam ! Clean residual mean=-0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.305976 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.305976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145443Jy sigma=0.000784 ! Fit after self-cal, rms=0.145445Jy sigma=0.000784 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145445Jy sigma=0.000784 ! Fit after self-cal, rms=0.145627Jy sigma=0.000784 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.978 mas, bmaj=10.45 mas, bpa=-6.207 degrees ! Estimated noise=1182.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106573 Jy ! Component: 100 - total flux cleaned = 0.00132156 Jy ! Component: 150 - total flux cleaned = 0.00138787 Jy ! Component: 200 - total flux cleaned = 0.00141756 Jy ! Total flux subtracted in 200 components = 0.00141756 Jy ! Clean residual min=-0.002697 max=0.002726 Jy/beam ! Clean residual mean=-0.000002 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.307394 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 0.307394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145604Jy sigma=0.000784 ! Fit after self-cal, rms=0.145604Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430772 Jy ! Component: 100 - total flux cleaned = 0.000457293 Jy ! Component: 150 - total flux cleaned = 0.000481224 Jy ! Component: 200 - total flux cleaned = 0.000457641 Jy ! Total flux subtracted in 200 components = 0.000457641 Jy ! Clean residual min=-0.002685 max=0.002627 Jy/beam ! Clean residual mean=-0.000002 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.307852 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 141 components and 0.307852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145594Jy sigma=0.000784 ! Fit after self-cal, rms=0.145596Jy sigma=0.000784 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.08 mas, bpa=-3.901 degrees ! Estimated noise=912.362 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 7.08 at -3.901 degrees (North through East) ! Clean map min=-0.0022814 max=0.26434 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.684 mas, bmaj=6.383 mas, bpa=-4.695 degrees ! Estimated noise=1073.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204995 Jy ! Component: 100 - total flux cleaned = 0.249955 Jy ! Component: 150 - total flux cleaned = 0.264428 Jy ! Component: 200 - total flux cleaned = 0.272937 Jy ! Total flux subtracted in 200 components = 0.272937 Jy ! Clean residual min=-0.003609 max=0.004784 Jy/beam ! Clean residual mean=0.000004 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.272937 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.272937 Jy ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.08 mas, bpa=-3.901 degrees ! Estimated noise=912.362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844941 Jy ! Component: 100 - total flux cleaned = 0.014175 Jy ! Component: 150 - total flux cleaned = 0.018339 Jy ! Component: 200 - total flux cleaned = 0.02151 Jy ! Total flux subtracted in 200 components = 0.02151 Jy ! Clean residual min=-0.002820 max=0.002857 Jy/beam ! Clean residual mean=0.000003 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.294447 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 74 components and 0.294447 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.978 mas, bmaj=10.45 mas, bpa=-6.207 degrees ! Estimated noise=1182.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421563 Jy ! Component: 100 - total flux cleaned = 0.00703756 Jy ! Component: 150 - total flux cleaned = 0.00902158 Jy ! Component: 200 - total flux cleaned = 0.0104517 Jy ! Total flux subtracted in 200 components = 0.0104517 Jy ! Clean residual min=-0.002873 max=0.002474 Jy/beam ! Clean residual mean=0.000001 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.304899 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000580629 Jy ! Component: 100 - total flux cleaned = 0.000884005 Jy ! Component: 150 - total flux cleaned = 0.00115252 Jy ! Component: 200 - total flux cleaned = 0.0013919 Jy ! Total flux subtracted in 200 components = 0.0013919 Jy ! Clean residual min=-0.002735 max=0.002461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.306291 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 148 components and 0.306291 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.08 mas, bpa=-3.901 degrees ! Estimated noise=912.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120437 Jy ! Component: 100 - total flux cleaned = 0.000370493 Jy ! Component: 150 - total flux cleaned = 0.000558311 Jy ! Component: 200 - total flux cleaned = 0.00062723 Jy ! Total flux subtracted in 200 components = 0.00062723 Jy ! Clean residual min=-0.002472 max=0.002500 Jy/beam ! Clean residual mean=-0.000001 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.306918 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 168 components and 0.306918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145626Jy sigma=0.000785 ! Fit after self-cal, rms=0.145629Jy sigma=0.000785 wmodel J0518+2054_S_2015_01_23_pus_map.mod ! Writing 168 model components to file: J0518+2054_S_2015_01_23_pus_map.mod wobs J0518+2054_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0518+2054_S_2015_01_23_pus_uvs.fits wwins J0518+2054_S_2015_01_23_pus_map.win ! wwins: Wrote 3 windows to J0518+2054_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103347 Jy ! Component: 100 - total flux cleaned = 0.00137991 Jy ! Component: 150 - total flux cleaned = 0.00162687 Jy ! Component: 200 - total flux cleaned = 0.00178471 Jy ! Component: 250 - total flux cleaned = 0.00186202 Jy ! Component: 300 - total flux cleaned = 0.00204831 Jy ! Component: 350 - total flux cleaned = 0.00204789 Jy ! Component: 400 - total flux cleaned = 0.00208405 Jy ! Component: 450 - total flux cleaned = 0.00218867 Jy ! Component: 500 - total flux cleaned = 0.00215427 Jy ! Component: 550 - total flux cleaned = 0.00215267 Jy ! Component: 600 - total flux cleaned = 0.00195513 Jy ! Component: 650 - total flux cleaned = 0.00192301 Jy ! Component: 700 - total flux cleaned = 0.00179694 Jy ! Component: 750 - total flux cleaned = 0.0018591 Jy ! Component: 800 - total flux cleaned = 0.0016755 Jy ! Component: 850 - total flux cleaned = 0.00164636 Jy ! Component: 900 - total flux cleaned = 0.0015873 Jy ! Component: 950 - total flux cleaned = 0.00155863 Jy ! Component: 1000 - total flux cleaned = 0.00155834 Jy ! Component: 1050 - total flux cleaned = 0.00147203 Jy ! Component: 1100 - total flux cleaned = 0.00135917 Jy ! Component: 1150 - total flux cleaned = 0.00127557 Jy ! Component: 1200 - total flux cleaned = 0.00119295 Jy ! Component: 1250 - total flux cleaned = 0.00111147 Jy ! Component: 1300 - total flux cleaned = 0.00108451 Jy ! Component: 1350 - total flux cleaned = 0.000978128 Jy ! Component: 1400 - total flux cleaned = 0.000899475 Jy ! Component: 1450 - total flux cleaned = 0.000873464 Jy ! Component: 1500 - total flux cleaned = 0.00084797 Jy ! Component: 1550 - total flux cleaned = 0.000797277 Jy ! Component: 1600 - total flux cleaned = 0.000696955 Jy ! Component: 1650 - total flux cleaned = 0.000622342 Jy ! Component: 1700 - total flux cleaned = 0.000573127 Jy ! Component: 1750 - total flux cleaned = 0.000524504 Jy ! Component: 1800 - total flux cleaned = 0.000524613 Jy ! Component: 1850 - total flux cleaned = 0.000429161 Jy ! Component: 1900 - total flux cleaned = 0.000334483 Jy ! Component: 1950 - total flux cleaned = 0.000264512 Jy ! Component: 2000 - total flux cleaned = 0.00031103 Jy ! Component: 2050 - total flux cleaned = 0.000196274 Jy ! Component: 2100 - total flux cleaned = 0.000173495 Jy ! Component: 2150 - total flux cleaned = 8.31794e-05 Jy ! Component: 2200 - total flux cleaned = 6.07799e-05 Jy ! Component: 2250 - total flux cleaned = -5.6667e-06 Jy ! Component: 2300 - total flux cleaned = -9.35984e-05 Jy ! Component: 2350 - total flux cleaned = -0.000158802 Jy ! Component: 2400 - total flux cleaned = -0.000266601 Jy ! Component: 2450 - total flux cleaned = -0.000266476 Jy ! Component: 2500 - total flux cleaned = -0.000330108 Jy ! Component: 2550 - total flux cleaned = -0.000393228 Jy ! Component: 2600 - total flux cleaned = -0.000539484 Jy ! Component: 2650 - total flux cleaned = -0.000601307 Jy ! Component: 2700 - total flux cleaned = -0.000642492 Jy ! Component: 2750 - total flux cleaned = -0.000703641 Jy ! Component: 2800 - total flux cleaned = -0.000744183 Jy ! Component: 2850 - total flux cleaned = -0.000764105 Jy ! Component: 2900 - total flux cleaned = -0.000704477 Jy ! Component: 2950 - total flux cleaned = -0.000744066 Jy ! Component: 3000 - total flux cleaned = -0.000763947 Jy ! Component: 3050 - total flux cleaned = -0.00078373 Jy ! Component: 3100 - total flux cleaned = -0.000764536 Jy ! Component: 3150 - total flux cleaned = -0.000783891 Jy ! Component: 3200 - total flux cleaned = -0.000879298 Jy ! Component: 3250 - total flux cleaned = -0.000765487 Jy ! Component: 3300 - total flux cleaned = -0.000709118 Jy ! Component: 3350 - total flux cleaned = -0.000840024 Jy ! Component: 3400 - total flux cleaned = -0.000839912 Jy ! Component: 3450 - total flux cleaned = -0.000766233 Jy ! Component: 3500 - total flux cleaned = -0.000747873 Jy ! Component: 3550 - total flux cleaned = -0.000693304 Jy ! Component: 3600 - total flux cleaned = -0.000639161 Jy ! Component: 3650 - total flux cleaned = -0.000674965 Jy ! Component: 3700 - total flux cleaned = -0.000639171 Jy ! Component: 3750 - total flux cleaned = -0.000674703 Jy ! Component: 3800 - total flux cleaned = -0.000586619 Jy ! Component: 3850 - total flux cleaned = -0.000534066 Jy ! Component: 3900 - total flux cleaned = -0.000464368 Jy ! Component: 3950 - total flux cleaned = -0.000481749 Jy ! Component: 4000 - total flux cleaned = -0.000550652 Jy ! Component: 4050 - total flux cleaned = -0.000567748 Jy ! Total flux subtracted in 4096 components = -0.000567729 Jy ! Clean residual min=-0.001207 max=0.000966 Jy/beam ! Clean residual mean=0.000001 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.30635 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 454 components and 0.30635 Jy ![Exited script file: muppet] wmap "J0518+2054_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 7.08 at -3.901 degrees (North through East) ! Clean map min=-0.0019517 max=0.2648 Jy/beam ! Writing clean map to FITS file: J0518+2054_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.264797 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000312761 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.354341 0.354341 0.708681 1.41736 2.83472 5.66945 11.3389 22.6778 45.3556 90.7112 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.264 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.127 x 7.08 at -3.901 degrees (North through East) ! Clean map min=-0.0019517 max=0.2648 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0518+2054_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:06:05 2017