! Started logfile: J0517-1756_S_2015_03_17_pus_uvs.log on Fri Dec 30 22:47:26 2016 obs J0517-1756_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J0517-1756_S_2015_03_17_pus_uva.fits ! AN table 1: 104 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.879274 visibilities/baseline/integration-bin. ! Found source: J0517-1756 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 16460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0517-1756_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936412Jy sigma=0.009391 ! Fit after self-cal, rms=0.890766Jy sigma=0.008937 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.612 mas, bmaj=7.429 mas, bpa=2.187 degrees ! Estimated noise=745.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.074637 Jy ! Component: 100 - total flux cleaned = 0.103724 Jy ! Total flux subtracted in 100 components = 0.103724 Jy ! Clean residual min=-0.007726 max=0.021098 Jy/beam ! Clean residual mean=-0.000006 rms=0.002389 Jy/beam ! Combined flux in latest and established models = 0.103724 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.103724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098080Jy sigma=0.000913 ! Fit after self-cal, rms=0.097858Jy sigma=0.000911 ! Inverting map ! Added new window around map position (4, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216563 Jy ! Component: 100 - total flux cleaned = 0.0359445 Jy ! Total flux subtracted in 100 components = 0.0359445 Jy ! Clean residual min=-0.005523 max=0.009313 Jy/beam ! Clean residual mean=-0.000011 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 0.139668 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 50 components and 0.139669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089478Jy sigma=0.000831 ! Fit after self-cal, rms=0.089176Jy sigma=0.000828 ! Inverting map ! Added new window around map position (7, -10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121941 Jy ! Component: 100 - total flux cleaned = 0.0209574 Jy ! Total flux subtracted in 100 components = 0.0209574 Jy ! Clean residual min=-0.004248 max=0.005381 Jy/beam ! Clean residual mean=-0.000012 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.160626 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 70 components and 0.160626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086096Jy sigma=0.000801 ! Fit after self-cal, rms=0.085984Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=8.736 mas, bpa=2.22 degrees ! Estimated noise=559.712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115639 Jy ! Component: 100 - total flux cleaned = 0.0191978 Jy ! Component: 150 - total flux cleaned = 0.024591 Jy ! Component: 200 - total flux cleaned = 0.0284633 Jy ! Total flux subtracted in 200 components = 0.0284633 Jy ! Clean residual min=-0.003775 max=0.005580 Jy/beam ! Clean residual mean=-0.000026 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.189089 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 112 components and 0.189089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083777Jy sigma=0.000783 ! Fit after self-cal, rms=0.083704Jy sigma=0.000782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.86 HN 1.00 KP 1.07 ! LA 0.96 MK 0.96 NL 0.93 OV 1.03 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.89 HN 1.03 KP 1.07 ! LA 0.94 MK 0.97 NL 1.01 OV 1.08 ! PT 1.01 SC 1.08 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 1.03 KP 0.95 ! LA 0.76 MK 1.05 NL 1.11 OV 0.98 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 1.03 KP 0.93 ! LA 0.84 MK 1.13 NL 1.00 OV 1.05 ! PT 1.06 SC 0.94 ! ! ! Fit before self-cal, rms=0.083704Jy sigma=0.000782 ! Fit after self-cal, rms=0.079413Jy sigma=0.000770 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.832 mas, bpa=2.363 degrees ! Estimated noise=555.858 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488645 Jy ! Component: 100 - total flux cleaned = 0.00715624 Jy ! Component: 150 - total flux cleaned = 0.00858583 Jy ! Component: 200 - total flux cleaned = 0.00916279 Jy ! Total flux subtracted in 200 components = 0.00916279 Jy ! Clean residual min=-0.002110 max=0.002124 Jy/beam ! Clean residual mean=-0.000010 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.198252 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 144 components and 0.198252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079127Jy sigma=0.000767 ! Fit after self-cal, rms=0.079036Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079036Jy sigma=0.000767 ! Fit after self-cal, rms=0.079024Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=8.856 mas, bpa=2.286 degrees ! Estimated noise=555.377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152532 Jy ! Component: 100 - total flux cleaned = 0.00242102 Jy ! Component: 150 - total flux cleaned = 0.00269752 Jy ! Component: 200 - total flux cleaned = 0.00287951 Jy ! Total flux subtracted in 200 components = 0.00287951 Jy ! Clean residual min=-0.001804 max=0.001603 Jy/beam ! Clean residual mean=-0.000006 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.201131 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 168 components and 0.201131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078983Jy sigma=0.000766 ! Fit after self-cal, rms=0.078984Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266282 Jy ! Component: 100 - total flux cleaned = 0.000401371 Jy ! Component: 150 - total flux cleaned = 0.000498733 Jy ! Component: 200 - total flux cleaned = 0.000587717 Jy ! Total flux subtracted in 200 components = 0.000587717 Jy ! Clean residual min=-0.001743 max=0.001528 Jy/beam ! Clean residual mean=-0.000005 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.201719 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 178 components and 0.201719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078968Jy sigma=0.000766 ! Fit after self-cal, rms=0.078967Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078967Jy sigma=0.000766 ! Fit after self-cal, rms=0.078986Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.867 mas, bpa=2.304 degrees ! Estimated noise=555.496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000537579 Jy ! Component: 100 - total flux cleaned = 0.000753114 Jy ! Component: 150 - total flux cleaned = 0.000860119 Jy ! Component: 200 - total flux cleaned = 0.000920005 Jy ! Total flux subtracted in 200 components = 0.000920005 Jy ! Clean residual min=-0.001666 max=0.001513 Jy/beam ! Clean residual mean=-0.000005 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.202639 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 188 components and 0.202639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078973Jy sigma=0.000765 ! Fit after self-cal, rms=0.078972Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.66322e-05 Jy ! Component: 100 - total flux cleaned = 0.000115395 Jy ! Component: 150 - total flux cleaned = 0.000150506 Jy ! Component: 200 - total flux cleaned = 0.000184007 Jy ! Total flux subtracted in 200 components = 0.000184007 Jy ! Clean residual min=-0.001651 max=0.001488 Jy/beam ! Clean residual mean=-0.000005 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.202823 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 191 components and 0.202823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078964Jy sigma=0.000765 ! Fit after self-cal, rms=0.078963Jy sigma=0.000765 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078963Jy sigma=0.000765 ! Fit after self-cal, rms=0.078921Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.577 mas, bmaj=16.24 mas, bpa=2.854 degrees ! Estimated noise=697.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706344 Jy ! Component: 100 - total flux cleaned = 0.000778822 Jy ! Component: 150 - total flux cleaned = 0.0008 Jy ! Component: 200 - total flux cleaned = 0.000817121 Jy ! Total flux subtracted in 200 components = 0.000817121 Jy ! Clean residual min=-0.001794 max=0.001492 Jy/beam ! Clean residual mean=-0.000008 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.20364 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 203 components and 0.20364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078917Jy sigma=0.000765 ! Fit after self-cal, rms=0.078915Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.10579e-05 Jy ! Component: 100 - total flux cleaned = 7.17086e-05 Jy ! Component: 150 - total flux cleaned = 5.81195e-05 Jy ! Component: 200 - total flux cleaned = 4.57572e-05 Jy ! Total flux subtracted in 200 components = 4.57572e-05 Jy ! Clean residual min=-0.001758 max=0.001497 Jy/beam ! Clean residual mean=-0.000008 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.203686 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 208 components and 0.203686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078915Jy sigma=0.000765 ! Fit after self-cal, rms=0.078915Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.87 mas, bpa=2.302 degrees ! Estimated noise=555.259 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 8.87 at 2.302 degrees (North through East) ! Clean map min=-0.0015607 max=0.10148 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.647 mas, bmaj=7.522 mas, bpa=2.347 degrees ! Estimated noise=747.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743454 Jy ! Component: 100 - total flux cleaned = 0.106081 Jy ! Component: 150 - total flux cleaned = 0.126557 Jy ! Component: 200 - total flux cleaned = 0.140823 Jy ! Total flux subtracted in 200 components = 0.140823 Jy ! Clean residual min=-0.004297 max=0.008018 Jy/beam ! Clean residual mean=-0.000010 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.140823 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.140823 Jy ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.87 mas, bpa=2.302 degrees ! Estimated noise=555.259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016161 Jy ! Component: 100 - total flux cleaned = 0.0265117 Jy ! Component: 150 - total flux cleaned = 0.0339921 Jy ! Component: 200 - total flux cleaned = 0.039698 Jy ! Total flux subtracted in 200 components = 0.039698 Jy ! Clean residual min=-0.002487 max=0.003412 Jy/beam ! Clean residual mean=-0.000016 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.180521 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 90 components and 0.180521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.577 mas, bmaj=16.24 mas, bpa=2.854 degrees ! Estimated noise=697.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00711191 Jy ! Component: 100 - total flux cleaned = 0.0116446 Jy ! Component: 150 - total flux cleaned = 0.0147613 Jy ! Component: 200 - total flux cleaned = 0.0169906 Jy ! Total flux subtracted in 200 components = 0.0169906 Jy ! Clean residual min=-0.002243 max=0.002135 Jy/beam ! Clean residual mean=-0.000014 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.197511 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163284 Jy ! Component: 100 - total flux cleaned = 0.00285593 Jy ! Component: 150 - total flux cleaned = 0.00378726 Jy ! Component: 200 - total flux cleaned = 0.00428704 Jy ! Total flux subtracted in 200 components = 0.00428704 Jy ! Clean residual min=-0.001957 max=0.001526 Jy/beam ! Clean residual mean=-0.000010 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.201798 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 174 components and 0.201798 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=8.87 mas, bpa=2.302 degrees ! Estimated noise=555.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421312 Jy ! Component: 100 - total flux cleaned = 0.000521485 Jy ! Component: 150 - total flux cleaned = 0.000562658 Jy ! Component: 200 - total flux cleaned = 0.00060091 Jy ! Total flux subtracted in 200 components = 0.00060091 Jy ! Clean residual min=-0.001694 max=0.001742 Jy/beam ! Clean residual mean=-0.000006 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.202399 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 199 components and 0.202399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078968Jy sigma=0.000766 ! Fit after self-cal, rms=0.078959Jy sigma=0.000766 wmodel J0517-1756_S_2015_03_17_pus_map.mod ! Writing 199 model components to file: J0517-1756_S_2015_03_17_pus_map.mod wobs J0517-1756_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J0517-1756_S_2015_03_17_pus_uvs.fits wwins J0517-1756_S_2015_03_17_pus_map.win ! wwins: Wrote 4 windows to J0517-1756_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012078 Jy ! Component: 100 - total flux cleaned = -3.50619e-05 Jy ! Component: 150 - total flux cleaned = 0.000102309 Jy ! Component: 200 - total flux cleaned = 0.000206879 Jy ! Component: 250 - total flux cleaned = 0.000409353 Jy ! Component: 300 - total flux cleaned = 0.000555982 Jy ! Component: 350 - total flux cleaned = 0.000745379 Jy ! Component: 400 - total flux cleaned = 0.00090677 Jy ! Component: 450 - total flux cleaned = 0.000996885 Jy ! Component: 500 - total flux cleaned = 0.000996278 Jy ! Component: 550 - total flux cleaned = 0.000995929 Jy ! Component: 600 - total flux cleaned = 0.00101723 Jy ! Component: 650 - total flux cleaned = 0.00101753 Jy ! Component: 700 - total flux cleaned = 0.00105804 Jy ! Component: 750 - total flux cleaned = 0.00105815 Jy ! Component: 800 - total flux cleaned = 0.00109692 Jy ! Component: 850 - total flux cleaned = 0.00111605 Jy ! Component: 900 - total flux cleaned = 0.00115353 Jy ! Component: 950 - total flux cleaned = 0.00120851 Jy ! Component: 1000 - total flux cleaned = 0.00122661 Jy ! Component: 1050 - total flux cleaned = 0.00129766 Jy ! Component: 1100 - total flux cleaned = 0.00136751 Jy ! Component: 1150 - total flux cleaned = 0.00143627 Jy ! Component: 1200 - total flux cleaned = 0.0014869 Jy ! Component: 1250 - total flux cleaned = 0.00155383 Jy ! Component: 1300 - total flux cleaned = 0.00166907 Jy ! Component: 1350 - total flux cleaned = 0.00178239 Jy ! Component: 1400 - total flux cleaned = 0.00187817 Jy ! Component: 1450 - total flux cleaned = 0.00195705 Jy ! Component: 1500 - total flux cleaned = 0.0020819 Jy ! Component: 1550 - total flux cleaned = 0.00217438 Jy ! Component: 1600 - total flux cleaned = 0.00228106 Jy ! Component: 1650 - total flux cleaned = 0.00238632 Jy ! Component: 1700 - total flux cleaned = 0.00247539 Jy ! Component: 1750 - total flux cleaned = 0.00254881 Jy ! Component: 1800 - total flux cleaned = 0.00266527 Jy ! Component: 1850 - total flux cleaned = 0.00280923 Jy ! Component: 1900 - total flux cleaned = 0.00288016 Jy ! Component: 1950 - total flux cleaned = 0.00297867 Jy ! Component: 2000 - total flux cleaned = 0.00303424 Jy ! Component: 2050 - total flux cleaned = 0.00307563 Jy ! Component: 2100 - total flux cleaned = 0.00310298 Jy ! Component: 2150 - total flux cleaned = 0.00318409 Jy ! Component: 2200 - total flux cleaned = 0.00321089 Jy ! Component: 2250 - total flux cleaned = 0.00333026 Jy ! Component: 2300 - total flux cleaned = 0.00335638 Jy ! Component: 2350 - total flux cleaned = 0.00339537 Jy ! Component: 2400 - total flux cleaned = 0.00344709 Jy ! Component: 2450 - total flux cleaned = 0.00345994 Jy ! Component: 2500 - total flux cleaned = 0.00348526 Jy ! Component: 2550 - total flux cleaned = 0.00354801 Jy ! Component: 2600 - total flux cleaned = 0.00352287 Jy ! Component: 2650 - total flux cleaned = 0.00357211 Jy ! Component: 2700 - total flux cleaned = 0.00360863 Jy ! Component: 2750 - total flux cleaned = 0.00362075 Jy ! Component: 2800 - total flux cleaned = 0.00358485 Jy ! Component: 2850 - total flux cleaned = 0.00365639 Jy ! Component: 2900 - total flux cleaned = 0.00369189 Jy ! Component: 2950 - total flux cleaned = 0.0037385 Jy ! Component: 3000 - total flux cleaned = 0.00368035 Jy ! Component: 3050 - total flux cleaned = 0.00371506 Jy ! Component: 3100 - total flux cleaned = 0.00371525 Jy ! Component: 3150 - total flux cleaned = 0.00370393 Jy ! Component: 3200 - total flux cleaned = 0.00370393 Jy ! Component: 3250 - total flux cleaned = 0.00373738 Jy ! Component: 3300 - total flux cleaned = 0.00372644 Jy ! Component: 3350 - total flux cleaned = 0.00372654 Jy ! Component: 3400 - total flux cleaned = 0.00372662 Jy ! Component: 3450 - total flux cleaned = 0.00374829 Jy ! Component: 3500 - total flux cleaned = 0.00372669 Jy ! Component: 3550 - total flux cleaned = 0.0037373 Jy ! Component: 3600 - total flux cleaned = 0.00374776 Jy ! Component: 3650 - total flux cleaned = 0.00373722 Jy ! Component: 3700 - total flux cleaned = 0.00376856 Jy ! Component: 3750 - total flux cleaned = 0.00375827 Jy ! Component: 3800 - total flux cleaned = 0.00376862 Jy ! Component: 3850 - total flux cleaned = 0.00381961 Jy ! Component: 3900 - total flux cleaned = 0.00382971 Jy ! Component: 3950 - total flux cleaned = 0.00382969 Jy ! Component: 4000 - total flux cleaned = 0.00380983 Jy ! Component: 4050 - total flux cleaned = 0.00381983 Jy ! Total flux subtracted in 4096 components = 0.00385926 Jy ! Clean residual min=-0.000596 max=0.000558 Jy/beam ! Clean residual mean=-0.000003 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.206259 Jy keep ! Adding 256 model components to the UV plane model. ! The established model now contains 455 components and 0.206259 Jy ![Exited script file: muppet] wmap "J0517-1756_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 8.87 at 2.302 degrees (North through East) ! Clean map min=-0.0011 max=0.10265 Jy/beam ! Writing clean map to FITS file: J0517-1756_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.102651 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.538606 0.538606 1.07721 2.15442 4.30885 8.61769 17.2354 34.4708 68.9415 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 8.87 at 2.302 degrees (North through East) ! Clean map min=-0.0011 max=0.10265 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0517-1756_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 22:47:34 2016