! Started logfile: J0513-2016_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:21:54 2016 obs J0513-2016_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J0513-2016_S_2014_12_20_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.92562 visibilities/baseline/integration-bin. ! Found source: J0513-2016 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 20160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0513-2016_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932632Jy sigma=0.009255 ! Fit after self-cal, rms=0.895769Jy sigma=0.008899 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.379 mas, bmaj=6.593 mas, bpa=-2.411 degrees ! Estimated noise=748.458 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0780586 Jy ! Component: 100 - total flux cleaned = 0.0975634 Jy ! Total flux subtracted in 100 components = 0.0975634 Jy ! Clean residual min=-0.004125 max=0.008627 Jy/beam ! Clean residual mean=-0.000022 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.0975634 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0975634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087759Jy sigma=0.000815 ! Fit after self-cal, rms=0.087745Jy sigma=0.000815 ! Inverting map ! Added new window around map position (-2.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101073 Jy ! Component: 100 - total flux cleaned = 0.0164083 Jy ! Total flux subtracted in 100 components = 0.0164083 Jy ! Clean residual min=-0.003692 max=0.003998 Jy/beam ! Clean residual mean=-0.000016 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.113972 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 23 components and 0.113972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085828Jy sigma=0.000797 ! Fit after self-cal, rms=0.085818Jy sigma=0.000796 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.011 mas, bmaj=7.897 mas, bpa=-2.16 degrees ! Estimated noise=509.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0072068 Jy ! Component: 100 - total flux cleaned = 0.0113952 Jy ! Component: 150 - total flux cleaned = 0.0140596 Jy ! Component: 200 - total flux cleaned = 0.0157706 Jy ! Total flux subtracted in 200 components = 0.0157706 Jy ! Clean residual min=-0.003766 max=0.004312 Jy/beam ! Clean residual mean=-0.000026 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.129742 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 0.129742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085078Jy sigma=0.000791 ! Fit after self-cal, rms=0.085061Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 0.95 KP 1.09 ! LA 0.96 MK 0.98 NL 0.97 OV 1.01 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.04 KP 1.05 ! LA 0.94 MK 1.00 NL 1.07 OV 0.99 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.19 HN 1.04 KP 0.96 ! LA 0.77 MK 1.00 NL 1.21 OV 0.96 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 1.02 KP 0.89 ! LA 0.79 MK 1.01 NL 1.07 OV 0.99 ! PT 1.00 SC 0.99 ! ! ! Fit before self-cal, rms=0.085061Jy sigma=0.000791 ! Fit after self-cal, rms=0.082244Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.019 mas, bmaj=7.915 mas, bpa=-2.046 degrees ! Estimated noise=506.397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356606 Jy ! Component: 100 - total flux cleaned = 0.00525783 Jy ! Component: 150 - total flux cleaned = 0.0062979 Jy ! Component: 200 - total flux cleaned = 0.00673543 Jy ! Total flux subtracted in 200 components = 0.00673543 Jy ! Clean residual min=-0.001944 max=0.001837 Jy/beam ! Clean residual mean=-0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.136478 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.136478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082103Jy sigma=0.000779 ! Fit after self-cal, rms=0.082079Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082079Jy sigma=0.000779 ! Fit after self-cal, rms=0.081650Jy sigma=0.000778 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=7.907 mas, bpa=-2.043 degrees ! Estimated noise=504.927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108577 Jy ! Component: 100 - total flux cleaned = 0.00167806 Jy ! Component: 150 - total flux cleaned = 0.00182992 Jy ! Component: 200 - total flux cleaned = 0.00183007 Jy ! Total flux subtracted in 200 components = 0.00183007 Jy ! Clean residual min=-0.001713 max=0.001648 Jy/beam ! Clean residual mean=-0.000005 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.138308 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.138308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081635Jy sigma=0.000778 ! Fit after self-cal, rms=0.081632Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027053 Jy ! Component: 100 - total flux cleaned = 0.000363419 Jy ! Component: 150 - total flux cleaned = 0.000350017 Jy ! Component: 200 - total flux cleaned = 0.000338158 Jy ! Total flux subtracted in 200 components = 0.000338158 Jy ! Clean residual min=-0.001684 max=0.001645 Jy/beam ! Clean residual mean=-0.000004 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.138646 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 0.138646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081628Jy sigma=0.000778 ! Fit after self-cal, rms=0.081627Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081627Jy sigma=0.000778 ! Fit after self-cal, rms=0.081638Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=7.909 mas, bpa=-2.083 degrees ! Estimated noise=504.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282782 Jy ! Component: 100 - total flux cleaned = 0.000356817 Jy ! Component: 150 - total flux cleaned = 0.000345566 Jy ! Component: 200 - total flux cleaned = 0.000334687 Jy ! Total flux subtracted in 200 components = 0.000334687 Jy ! Clean residual min=-0.001671 max=0.001640 Jy/beam ! Clean residual mean=-0.000005 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.138981 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 131 components and 0.138981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081634Jy sigma=0.000777 ! Fit after self-cal, rms=0.081635Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.93023e-05 Jy ! Component: 100 - total flux cleaned = 0.000111391 Jy ! Component: 150 - total flux cleaned = 0.000111777 Jy ! Component: 200 - total flux cleaned = 0.000112103 Jy ! Total flux subtracted in 200 components = 0.000112103 Jy ! Clean residual min=-0.001655 max=0.001639 Jy/beam ! Clean residual mean=-0.000005 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.139093 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 134 components and 0.139093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081633Jy sigma=0.000777 ! Fit after self-cal, rms=0.081633Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081633Jy sigma=0.000777 ! Fit after self-cal, rms=0.081615Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.529 mas, bmaj=17.07 mas, bpa=3.866 degrees ! Estimated noise=638.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110379 Jy ! Component: 100 - total flux cleaned = 0.00024879 Jy ! Component: 150 - total flux cleaned = 0.000289568 Jy ! Component: 200 - total flux cleaned = 0.00029774 Jy ! Total flux subtracted in 200 components = 0.00029774 Jy ! Clean residual min=-0.001906 max=0.001940 Jy/beam ! Clean residual mean=-0.000010 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.139391 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 144 components and 0.139391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081615Jy sigma=0.000777 ! Fit after self-cal, rms=0.081612Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.69277e-05 Jy ! Component: 100 - total flux cleaned = 0.000100926 Jy ! Component: 150 - total flux cleaned = 0.000116497 Jy ! Component: 200 - total flux cleaned = 0.000129927 Jy ! Total flux subtracted in 200 components = 0.000129927 Jy ! Clean residual min=-0.001901 max=0.001933 Jy/beam ! Clean residual mean=-0.000009 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.13952 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.13952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081612Jy sigma=0.000777 ! Fit after self-cal, rms=0.081611Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.912 mas, bpa=-2.121 degrees ! Estimated noise=504.876 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.912 at -2.121 degrees (North through East) ! Clean map min=-0.0015972 max=0.10351 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.385 mas, bmaj=6.601 mas, bpa=-2.255 degrees ! Estimated noise=743.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0773199 Jy ! Component: 100 - total flux cleaned = 0.09693 Jy ! Component: 150 - total flux cleaned = 0.106909 Jy ! Component: 200 - total flux cleaned = 0.113082 Jy ! Total flux subtracted in 200 components = 0.113082 Jy ! Clean residual min=-0.002703 max=0.003486 Jy/beam ! Clean residual mean=-0.000009 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.113082 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.113082 Jy ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.912 mas, bpa=-2.121 degrees ! Estimated noise=504.876 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00730815 Jy ! Component: 100 - total flux cleaned = 0.0119908 Jy ! Component: 150 - total flux cleaned = 0.0153715 Jy ! Component: 200 - total flux cleaned = 0.0178947 Jy ! Total flux subtracted in 200 components = 0.0178947 Jy ! Clean residual min=-0.001811 max=0.002005 Jy/beam ! Clean residual mean=-0.000009 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.130977 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 71 components and 0.130976 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.529 mas, bmaj=17.07 mas, bpa=3.866 degrees ! Estimated noise=638.467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030756 Jy ! Component: 100 - total flux cleaned = 0.00487815 Jy ! Component: 150 - total flux cleaned = 0.00603324 Jy ! Component: 200 - total flux cleaned = 0.0067974 Jy ! Total flux subtracted in 200 components = 0.0067974 Jy ! Clean residual min=-0.001865 max=0.001983 Jy/beam ! Clean residual mean=-0.000012 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.137774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513253 Jy ! Component: 100 - total flux cleaned = 0.000861199 Jy ! Component: 150 - total flux cleaned = 0.00107447 Jy ! Component: 200 - total flux cleaned = 0.00112936 Jy ! Total flux subtracted in 200 components = 0.00112936 Jy ! Clean residual min=-0.001825 max=0.001938 Jy/beam ! Clean residual mean=-0.000010 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.138903 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 119 components and 0.138903 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=7.912 mas, bpa=-2.121 degrees ! Estimated noise=504.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.49103e-05 Jy ! Component: 100 - total flux cleaned = -8.51039e-05 Jy ! Component: 150 - total flux cleaned = -5.32206e-05 Jy ! Component: 200 - total flux cleaned = -5.26932e-05 Jy ! Total flux subtracted in 200 components = -5.26932e-05 Jy ! Clean residual min=-0.001646 max=0.001655 Jy/beam ! Clean residual mean=-0.000005 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.138851 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 131 components and 0.138851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081622Jy sigma=0.000777 ! Fit after self-cal, rms=0.081619Jy sigma=0.000777 wmodel J0513-2016_S_2014_12_20_pus_map.mod ! Writing 131 model components to file: J0513-2016_S_2014_12_20_pus_map.mod wobs J0513-2016_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J0513-2016_S_2014_12_20_pus_uvs.fits wwins J0513-2016_S_2014_12_20_pus_map.win ! wwins: Wrote 3 windows to J0513-2016_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162183 Jy ! Component: 100 - total flux cleaned = -0.000526316 Jy ! Component: 150 - total flux cleaned = -0.000648069 Jy ! Component: 200 - total flux cleaned = -0.000670758 Jy ! Component: 250 - total flux cleaned = -0.000782985 Jy ! Component: 300 - total flux cleaned = -0.000869904 Jy ! Component: 350 - total flux cleaned = -0.000954372 Jy ! Component: 400 - total flux cleaned = -0.00105723 Jy ! Component: 450 - total flux cleaned = -0.00109743 Jy ! Component: 500 - total flux cleaned = -0.0011174 Jy ! Component: 550 - total flux cleaned = -0.00121321 Jy ! Component: 600 - total flux cleaned = -0.00125062 Jy ! Component: 650 - total flux cleaned = -0.00128771 Jy ! Component: 700 - total flux cleaned = -0.00136063 Jy ! Component: 750 - total flux cleaned = -0.00144947 Jy ! Component: 800 - total flux cleaned = -0.00151915 Jy ! Component: 850 - total flux cleaned = -0.00151899 Jy ! Component: 900 - total flux cleaned = -0.00156967 Jy ! Component: 950 - total flux cleaned = -0.00155283 Jy ! Component: 1000 - total flux cleaned = -0.00160199 Jy ! Component: 1050 - total flux cleaned = -0.00158599 Jy ! Component: 1100 - total flux cleaned = -0.00163388 Jy ! Component: 1150 - total flux cleaned = -0.00158679 Jy ! Component: 1200 - total flux cleaned = -0.00171139 Jy ! Component: 1250 - total flux cleaned = -0.00174171 Jy ! Component: 1300 - total flux cleaned = -0.00181715 Jy ! Component: 1350 - total flux cleaned = -0.00187692 Jy ! Component: 1400 - total flux cleaned = -0.00190649 Jy ! Component: 1450 - total flux cleaned = -0.00192098 Jy ! Component: 1500 - total flux cleaned = -0.00195 Jy ! Component: 1550 - total flux cleaned = -0.00199301 Jy ! Component: 1600 - total flux cleaned = -0.00196467 Jy ! Component: 1650 - total flux cleaned = -0.00202083 Jy ! Component: 1700 - total flux cleaned = -0.0020206 Jy ! Component: 1750 - total flux cleaned = -0.00206185 Jy ! Component: 1800 - total flux cleaned = -0.00206157 Jy ! Component: 1850 - total flux cleaned = -0.00208843 Jy ! Component: 1900 - total flux cleaned = -0.00214202 Jy ! Component: 1950 - total flux cleaned = -0.00215529 Jy ! Component: 2000 - total flux cleaned = -0.00216842 Jy ! Component: 2050 - total flux cleaned = -0.00222007 Jy ! Component: 2100 - total flux cleaned = -0.00218153 Jy ! Component: 2150 - total flux cleaned = -0.00220715 Jy ! Component: 2200 - total flux cleaned = -0.00225763 Jy ! Component: 2250 - total flux cleaned = -0.002245 Jy ! Component: 2300 - total flux cleaned = -0.00226975 Jy ! Component: 2350 - total flux cleaned = -0.00231899 Jy ! Component: 2400 - total flux cleaned = -0.00239213 Jy ! Component: 2450 - total flux cleaned = -0.00235579 Jy ! Component: 2500 - total flux cleaned = -0.00243969 Jy ! Component: 2550 - total flux cleaned = -0.00245166 Jy ! Component: 2600 - total flux cleaned = -0.00254601 Jy ! Component: 2650 - total flux cleaned = -0.00253426 Jy ! Component: 2700 - total flux cleaned = -0.00259235 Jy ! Component: 2750 - total flux cleaned = -0.00261526 Jy ! Component: 2800 - total flux cleaned = -0.00262668 Jy ! Component: 2850 - total flux cleaned = -0.00263804 Jy ! Component: 2900 - total flux cleaned = -0.002683 Jy ! Component: 2950 - total flux cleaned = -0.00267176 Jy ! Component: 3000 - total flux cleaned = -0.00270493 Jy ! Component: 3050 - total flux cleaned = -0.00272686 Jy ! Component: 3100 - total flux cleaned = -0.00270516 Jy ! Component: 3150 - total flux cleaned = -0.00273765 Jy ! Component: 3200 - total flux cleaned = -0.0027269 Jy ! Component: 3250 - total flux cleaned = -0.0027268 Jy ! Component: 3300 - total flux cleaned = -0.00272678 Jy ! Component: 3350 - total flux cleaned = -0.00275832 Jy ! Component: 3400 - total flux cleaned = -0.00270622 Jy ! Component: 3450 - total flux cleaned = -0.002727 Jy ! Component: 3500 - total flux cleaned = -0.00273731 Jy ! Component: 3550 - total flux cleaned = -0.00274747 Jy ! Component: 3600 - total flux cleaned = -0.00274745 Jy ! Component: 3650 - total flux cleaned = -0.00272739 Jy ! Component: 3700 - total flux cleaned = -0.00269734 Jy ! Component: 3750 - total flux cleaned = -0.00270712 Jy ! Component: 3800 - total flux cleaned = -0.00268734 Jy ! Component: 3850 - total flux cleaned = -0.00270697 Jy ! Component: 3900 - total flux cleaned = -0.00273616 Jy ! Component: 3950 - total flux cleaned = -0.00273617 Jy ! Component: 4000 - total flux cleaned = -0.00269754 Jy ! Component: 4050 - total flux cleaned = -0.00271675 Jy ! Total flux subtracted in 4096 components = -0.00271672 Jy ! Clean residual min=-0.000675 max=0.000579 Jy/beam ! Clean residual mean=-0.000001 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.136134 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 429 components and 0.136134 Jy ![Exited script file: muppet] wmap "J0513-2016_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.912 at -2.121 degrees (North through East) ! Clean map min=-0.0010314 max=0.10432 Jy/beam ! Writing clean map to FITS file: J0513-2016_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104319 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173366 device "J0513-2016_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J0513-2016_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.498567 0.498567 0.997135 1.99427 3.98854 7.97708 15.9542 31.9083 63.8166 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.018 x 7.912 at -2.121 degrees (North through East) ! Clean map min=-0.0010314 max=0.10432 Jy/beam quit ! Quitting program ! Log file J0513-2016_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:22:01 2016