! Started logfile: J0510+1800_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:17:35 2017 obs J0510+1800_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0510+1800_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.287037 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0510+1800 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 2480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0510+1800_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.725380Jy sigma=0.011534 ! Fit after self-cal, rms=0.712120Jy sigma=0.011261 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=4.222 mas, bpa=-1.5 degrees ! Estimated noise=1362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199211 Jy ! Component: 100 - total flux cleaned = 0.252963 Jy ! Total flux subtracted in 100 components = 0.252963 Jy ! Clean residual min=-0.019909 max=0.027914 Jy/beam ! Clean residual mean=-0.000342 rms=0.006410 Jy/beam ! Combined flux in latest and established models = 0.252963 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.252963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113565Jy sigma=0.001490 ! Fit after self-cal, rms=0.113838Jy sigma=0.001489 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.554 mas, bmaj=6.001 mas, bpa=-11.37 degrees ! Estimated noise=951.246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047908 Jy ! Component: 100 - total flux cleaned = 0.0692623 Jy ! Component: 150 - total flux cleaned = 0.0808335 Jy ! Component: 200 - total flux cleaned = 0.0864272 Jy ! Total flux subtracted in 200 components = 0.0864272 Jy ! Clean residual min=-0.020343 max=0.032257 Jy/beam ! Clean residual mean=-0.000583 rms=0.007040 Jy/beam ! Combined flux in latest and established models = 0.339391 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 29 components and 0.339391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087708Jy sigma=0.001219 ! Fit after self-cal, rms=0.087960Jy sigma=0.001216 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 0.98 ! MK 1.04 NL 0.99 OV 0.94 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* KP 1.00* LA 0.93 ! MK 1.03 NL 1.01 OV 0.98 PT 0.95 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* KP 1.00* LA 0.78 ! MK 1.06 NL 1.01 OV 0.93 PT 0.93 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* KP 1.00* LA 0.84 ! MK 1.00 NL 1.07 OV 1.02 PT 0.96 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.087960Jy sigma=0.001216 ! Fit after self-cal, rms=0.075579Jy sigma=0.001068 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.589 mas, bmaj=6.126 mas, bpa=-10.71 degrees ! Estimated noise=962.901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231344 Jy ! Component: 100 - total flux cleaned = 0.0319101 Jy ! Component: 150 - total flux cleaned = 0.0355415 Jy ! Component: 200 - total flux cleaned = 0.0385941 Jy ! Total flux subtracted in 200 components = 0.0385941 Jy ! Clean residual min=-0.007559 max=0.007770 Jy/beam ! Clean residual mean=-0.000028 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.377985 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 61 components and 0.377985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068670Jy sigma=0.000959 ! Fit after self-cal, rms=0.067910Jy sigma=0.000953 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067910Jy sigma=0.000953 ! Fit after self-cal, rms=0.068365Jy sigma=0.000946 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.631 mas, bmaj=6.114 mas, bpa=-10.71 degrees ! Estimated noise=955.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046554 Jy ! Component: 100 - total flux cleaned = 0.00593418 Jy ! Component: 150 - total flux cleaned = 0.00615414 Jy ! Component: 200 - total flux cleaned = 0.00621619 Jy ! Total flux subtracted in 200 components = 0.00621619 Jy ! Clean residual min=-0.004394 max=0.004276 Jy/beam ! Clean residual mean=0.000022 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.384201 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 88 components and 0.384201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067972Jy sigma=0.000941 ! Fit after self-cal, rms=0.068024Jy sigma=0.000941 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709094 Jy ! Component: 100 - total flux cleaned = 0.000710003 Jy ! Component: 150 - total flux cleaned = 0.000660976 Jy ! Component: 200 - total flux cleaned = 0.000703121 Jy ! Total flux subtracted in 200 components = 0.000703121 Jy ! Clean residual min=-0.003933 max=0.003919 Jy/beam ! Clean residual mean=0.000027 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.384904 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.384904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067922Jy sigma=0.000940 ! Fit after self-cal, rms=0.067915Jy sigma=0.000940 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067915Jy sigma=0.000940 ! Fit after self-cal, rms=0.068185Jy sigma=0.000939 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.644 mas, bmaj=6.124 mas, bpa=-11 degrees ! Estimated noise=955.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000301524 Jy ! Component: 100 - total flux cleaned = 0.000250714 Jy ! Component: 150 - total flux cleaned = 0.000133735 Jy ! Component: 200 - total flux cleaned = 9.70552e-05 Jy ! Total flux subtracted in 200 components = 9.70552e-05 Jy ! Clean residual min=-0.003556 max=0.003598 Jy/beam ! Clean residual mean=0.000022 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.385001 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.385001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068103Jy sigma=0.000939 ! Fit after self-cal, rms=0.068112Jy sigma=0.000939 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288639 Jy ! Component: 100 - total flux cleaned = 0.000286615 Jy ! Component: 150 - total flux cleaned = 0.000319415 Jy ! Component: 200 - total flux cleaned = 0.000349671 Jy ! Total flux subtracted in 200 components = 0.000349671 Jy ! Clean residual min=-0.003461 max=0.003461 Jy/beam ! Clean residual mean=0.000025 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.385351 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.385351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068061Jy sigma=0.000938 ! Fit after self-cal, rms=0.068056Jy sigma=0.000938 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068056Jy sigma=0.000938 ! Fit after self-cal, rms=0.068079Jy sigma=0.000938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.254 mas, bmaj=11.1 mas, bpa=7.473 degrees ! Estimated noise=1078.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480864 Jy ! Component: 100 - total flux cleaned = -0.00066096 Jy ! Component: 150 - total flux cleaned = -0.000887865 Jy ! Component: 200 - total flux cleaned = -0.00103299 Jy ! Total flux subtracted in 200 components = -0.00103299 Jy ! Clean residual min=-0.003140 max=0.002976 Jy/beam ! Clean residual mean=0.000021 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.384318 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 0.384318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068065Jy sigma=0.000938 ! Fit after self-cal, rms=0.068079Jy sigma=0.000938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215522 Jy ! Component: 100 - total flux cleaned = -0.000239937 Jy ! Component: 150 - total flux cleaned = -0.000286478 Jy ! Component: 200 - total flux cleaned = -0.00033108 Jy ! Total flux subtracted in 200 components = -0.00033108 Jy ! Clean residual min=-0.002822 max=0.002928 Jy/beam ! Clean residual mean=0.000018 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.383987 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 130 components and 0.383987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068080Jy sigma=0.000938 ! Fit after self-cal, rms=0.068086Jy sigma=0.000938 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.65 mas, bmaj=6.129 mas, bpa=-11.1 degrees ! Estimated noise=954.395 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.65 x 6.129 at -11.1 degrees (North through East) ! Clean map min=-0.0032987 max=0.27778 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=4.255 mas, bpa=-1.997 degrees ! Estimated noise=1408.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205858 Jy ! Component: 100 - total flux cleaned = 0.26102 Jy ! Component: 150 - total flux cleaned = 0.290828 Jy ! Component: 200 - total flux cleaned = 0.310517 Jy ! Total flux subtracted in 200 components = 0.310517 Jy ! Clean residual min=-0.010318 max=0.012513 Jy/beam ! Clean residual mean=-0.000163 rms=0.003218 Jy/beam ! Combined flux in latest and established models = 0.310517 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.310517 Jy ! Inverting map and beam ! Estimated beam: bmin=4.65 mas, bmaj=6.129 mas, bpa=-11.1 degrees ! Estimated noise=954.395 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221603 Jy ! Component: 100 - total flux cleaned = 0.036258 Jy ! Component: 150 - total flux cleaned = 0.0459153 Jy ! Component: 200 - total flux cleaned = 0.052647 Jy ! Total flux subtracted in 200 components = 0.052647 Jy ! Clean residual min=-0.004888 max=0.005272 Jy/beam ! Clean residual mean=-0.000126 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.363164 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 0.363164 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.254 mas, bmaj=11.1 mas, bpa=7.473 degrees ! Estimated noise=1078.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649874 Jy ! Component: 100 - total flux cleaned = 0.0104486 Jy ! Component: 150 - total flux cleaned = 0.01319 Jy ! Component: 200 - total flux cleaned = 0.0151902 Jy ! Total flux subtracted in 200 components = 0.0151902 Jy ! Clean residual min=-0.003612 max=0.002847 Jy/beam ! Clean residual mean=-0.000045 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.378354 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147845 Jy ! Component: 100 - total flux cleaned = 0.00221594 Jy ! Component: 150 - total flux cleaned = 0.00267338 Jy ! Component: 200 - total flux cleaned = 0.00287033 Jy ! Total flux subtracted in 200 components = 0.00287033 Jy ! Clean residual min=-0.003004 max=0.002631 Jy/beam ! Clean residual mean=-0.000013 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.381224 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 106 components and 0.381224 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.65 mas, bmaj=6.129 mas, bpa=-11.1 degrees ! Estimated noise=954.395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359947 Jy ! Component: 100 - total flux cleaned = 0.000686287 Jy ! Component: 150 - total flux cleaned = 0.000956187 Jy ! Component: 200 - total flux cleaned = 0.00107483 Jy ! Total flux subtracted in 200 components = 0.00107483 Jy ! Clean residual min=-0.003070 max=0.003117 Jy/beam ! Clean residual mean=-0.000000 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.382299 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 122 components and 0.382299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068025Jy sigma=0.000938 ! Fit after self-cal, rms=0.068009Jy sigma=0.000938 wmodel J0510+1800_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J0510+1800_S_2014_01_04_pus_map.mod wobs J0510+1800_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0510+1800_S_2014_01_04_pus_uvs.fits wwins J0510+1800_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J0510+1800_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000386343 Jy ! Component: 100 - total flux cleaned = 0.000390756 Jy ! Component: 150 - total flux cleaned = 0.00064393 Jy ! Component: 200 - total flux cleaned = 0.000721455 Jy ! Component: 250 - total flux cleaned = 0.000721748 Jy ! Component: 300 - total flux cleaned = 0.000581751 Jy ! Component: 350 - total flux cleaned = 0.000482065 Jy ! Component: 400 - total flux cleaned = 0.000386774 Jy ! Component: 450 - total flux cleaned = 0.000294971 Jy ! Component: 500 - total flux cleaned = 0.000116413 Jy ! Component: 550 - total flux cleaned = 2.00277e-06 Jy ! Component: 600 - total flux cleaned = -0.000109296 Jy ! Component: 650 - total flux cleaned = -0.000270057 Jy ! Component: 700 - total flux cleaned = -0.00045151 Jy ! Component: 750 - total flux cleaned = -0.000602536 Jy ! Component: 800 - total flux cleaned = -0.000750046 Jy ! Component: 850 - total flux cleaned = -0.00084574 Jy ! Component: 900 - total flux cleaned = -0.000985777 Jy ! Component: 950 - total flux cleaned = -0.00100833 Jy ! Component: 1000 - total flux cleaned = -0.00107509 Jy ! Component: 1050 - total flux cleaned = -0.00114077 Jy ! Component: 1100 - total flux cleaned = -0.00120554 Jy ! Component: 1150 - total flux cleaned = -0.00120577 Jy ! Component: 1200 - total flux cleaned = -0.00128978 Jy ! Component: 1250 - total flux cleaned = -0.00131032 Jy ! Component: 1300 - total flux cleaned = -0.00141232 Jy ! Component: 1350 - total flux cleaned = -0.00145242 Jy ! Component: 1400 - total flux cleaned = -0.00153207 Jy ! Component: 1450 - total flux cleaned = -0.00157144 Jy ! Component: 1500 - total flux cleaned = -0.00162992 Jy ! Component: 1550 - total flux cleaned = -0.00166862 Jy ! Component: 1600 - total flux cleaned = -0.00174519 Jy ! Component: 1650 - total flux cleaned = -0.00182104 Jy ! Component: 1700 - total flux cleaned = -0.00187749 Jy ! Component: 1750 - total flux cleaned = -0.00189633 Jy ! Component: 1800 - total flux cleaned = -0.0019334 Jy ! Component: 1850 - total flux cleaned = -0.00197015 Jy ! Component: 1900 - total flux cleaned = -0.00198837 Jy ! Component: 1950 - total flux cleaned = -0.0020426 Jy ! Component: 2000 - total flux cleaned = -0.00202454 Jy ! Component: 2050 - total flux cleaned = -0.00204249 Jy ! Component: 2100 - total flux cleaned = -0.00207807 Jy ! Component: 2150 - total flux cleaned = -0.00211322 Jy ! Component: 2200 - total flux cleaned = -0.00216579 Jy ! Component: 2250 - total flux cleaned = -0.00218315 Jy ! Component: 2300 - total flux cleaned = -0.00223533 Jy ! Component: 2350 - total flux cleaned = -0.00223531 Jy ! Component: 2400 - total flux cleaned = -0.00221805 Jy ! Component: 2450 - total flux cleaned = -0.00221817 Jy ! Component: 2500 - total flux cleaned = -0.00220075 Jy ! Component: 2550 - total flux cleaned = -0.00220067 Jy ! Component: 2600 - total flux cleaned = -0.00216616 Jy ! Component: 2650 - total flux cleaned = -0.00216602 Jy ! Component: 2700 - total flux cleaned = -0.00216594 Jy ! Component: 2750 - total flux cleaned = -0.0021659 Jy ! Component: 2800 - total flux cleaned = -0.0021832 Jy ! Component: 2850 - total flux cleaned = -0.00218316 Jy ! Component: 2900 - total flux cleaned = -0.00220097 Jy ! Component: 2950 - total flux cleaned = -0.00223656 Jy ! Component: 3000 - total flux cleaned = -0.00225459 Jy ! Component: 3050 - total flux cleaned = -0.0022366 Jy ! Component: 3100 - total flux cleaned = -0.00225477 Jy ! Component: 3150 - total flux cleaned = -0.00223653 Jy ! Component: 3200 - total flux cleaned = -0.00225505 Jy ! Component: 3250 - total flux cleaned = -0.0022552 Jy ! Component: 3300 - total flux cleaned = -0.00223653 Jy ! Component: 3350 - total flux cleaned = -0.0022176 Jy ! Component: 3400 - total flux cleaned = -0.00219837 Jy ! Component: 3450 - total flux cleaned = -0.0022177 Jy ! Component: 3500 - total flux cleaned = -0.00219842 Jy ! Component: 3550 - total flux cleaned = -0.00215914 Jy ! Component: 3600 - total flux cleaned = -0.00213925 Jy ! Component: 3650 - total flux cleaned = -0.00211912 Jy ! Component: 3700 - total flux cleaned = -0.00211889 Jy ! Component: 3750 - total flux cleaned = -0.00209841 Jy ! Component: 3800 - total flux cleaned = -0.0020986 Jy ! Component: 3850 - total flux cleaned = -0.00205676 Jy ! Component: 3900 - total flux cleaned = -0.00205675 Jy ! Component: 3950 - total flux cleaned = -0.0020141 Jy ! Component: 4000 - total flux cleaned = -0.00199207 Jy ! Component: 4050 - total flux cleaned = -0.00199218 Jy ! Total flux subtracted in 4096 components = -0.00197011 Jy ! Clean residual min=-0.001236 max=0.001319 Jy/beam ! Clean residual mean=-0.000012 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.380329 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 342 components and 0.380329 Jy ![Exited script file: muppet] wmap "J0510+1800_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.65 x 6.129 at -11.1 degrees (North through East) ! Clean map min=-0.0018589 max=0.28796 Jy/beam ! Writing clean map to FITS file: J0510+1800_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.287963 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000399909 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.416626 0.416626 0.833251 1.6665 3.333 6.66601 13.332 26.664 53.3281 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.287 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.65 x 6.129 at -11.1 degrees (North through East) ! Clean map min=-0.0018589 max=0.28796 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0510+1800_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:17:39 2017