! Started logfile: J0504+2802_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:17:26 2017 obs J0504+2802_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0504+2802_S_2014_01_04_pus_uva.fits ! AN table 1: 126 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0504+2802 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0504+2802_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 315 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918941Jy sigma=0.014295 ! Fit after self-cal, rms=0.898105Jy sigma=0.014021 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=4.604 mas, bpa=4.475 degrees ! Estimated noise=686.406 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0772828 Jy ! Component: 100 - total flux cleaned = 0.102089 Jy ! Total flux subtracted in 100 components = 0.102089 Jy ! Clean residual min=-0.006430 max=0.010561 Jy/beam ! Clean residual mean=0.000014 rms=0.002081 Jy/beam ! Combined flux in latest and established models = 0.102089 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.102089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071659Jy sigma=0.000989 ! Fit after self-cal, rms=0.071654Jy sigma=0.000988 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=5.361 mas, bpa=6.47 degrees ! Estimated noise=497.574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160231 Jy ! Component: 100 - total flux cleaned = 0.0243564 Jy ! Component: 150 - total flux cleaned = 0.0295338 Jy ! Component: 200 - total flux cleaned = 0.0327817 Jy ! Total flux subtracted in 200 components = 0.0327817 Jy ! Clean residual min=-0.005794 max=0.006986 Jy/beam ! Clean residual mean=0.000000 rms=0.001618 Jy/beam ! Combined flux in latest and established models = 0.13487 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.13487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067520Jy sigma=0.000935 ! Fit after self-cal, rms=0.067571Jy sigma=0.000935 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.00 ! MK 1.03 NL 0.95 OV 0.99 PT 0.98 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* KP 1.00* LA 1.00 ! MK 0.98 NL 1.00 OV 1.03 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* KP 1.00* LA 0.79 ! MK 1.01 NL 0.95 OV 0.96 PT 0.96 ! SC 1.13 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* KP 1.00* LA 0.84 ! MK 1.05 NL 1.07 OV 1.05 PT 1.01 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.067571Jy sigma=0.000935 ! Fit after self-cal, rms=0.064483Jy sigma=0.000918 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.096 mas, bmaj=5.418 mas, bpa=6.811 degrees ! Estimated noise=494.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000279182 Jy ! Component: 100 - total flux cleaned = 0.000240624 Jy ! Component: 150 - total flux cleaned = 0.000172218 Jy ! Component: 200 - total flux cleaned = 0.000140226 Jy ! Total flux subtracted in 200 components = 0.000140226 Jy ! Clean residual min=-0.003856 max=0.006429 Jy/beam ! Clean residual mean=-0.000006 rms=0.001359 Jy/beam ! Combined flux in latest and established models = 0.135011 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.135011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064430Jy sigma=0.000917 ! Fit after self-cal, rms=0.064247Jy sigma=0.000917 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064247Jy sigma=0.000917 ! Fit after self-cal, rms=0.064447Jy sigma=0.000913 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.089 mas, bmaj=5.374 mas, bpa=7.183 degrees ! Estimated noise=494.704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78149e-05 Jy ! Component: 100 - total flux cleaned = 0.000101124 Jy ! Component: 150 - total flux cleaned = 2.98724e-05 Jy ! Component: 200 - total flux cleaned = -3.61553e-05 Jy ! Total flux subtracted in 200 components = -3.61553e-05 Jy ! Clean residual min=-0.003587 max=0.005302 Jy/beam ! Clean residual mean=-0.000005 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.134975 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.134975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064415Jy sigma=0.000913 ! Fit after self-cal, rms=0.064426Jy sigma=0.000913 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581156 Jy ! Component: 100 - total flux cleaned = 0.00928432 Jy ! Component: 150 - total flux cleaned = 0.0115336 Jy ! Component: 200 - total flux cleaned = 0.0126264 Jy ! Total flux subtracted in 200 components = 0.0126264 Jy ! Clean residual min=-0.002554 max=0.003519 Jy/beam ! Clean residual mean=0.000000 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.147601 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 73 components and 0.147601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063861Jy sigma=0.000904 ! Fit after self-cal, rms=0.063790Jy sigma=0.000902 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063790Jy sigma=0.000902 ! Fit after self-cal, rms=0.063223Jy sigma=0.000902 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.082 mas, bmaj=5.351 mas, bpa=6.488 degrees ! Estimated noise=492.533 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251129 Jy ! Component: 100 - total flux cleaned = 0.0040942 Jy ! Component: 150 - total flux cleaned = 0.00491634 Jy ! Component: 200 - total flux cleaned = 0.0049558 Jy ! Total flux subtracted in 200 components = 0.0049558 Jy ! Clean residual min=-0.001989 max=0.002565 Jy/beam ! Clean residual mean=-0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.152557 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 90 components and 0.152557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063113Jy sigma=0.000900 ! Fit after self-cal, rms=0.063074Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, 20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213068 Jy ! Component: 100 - total flux cleaned = 0.00311273 Jy ! Component: 150 - total flux cleaned = 0.00356252 Jy ! Component: 200 - total flux cleaned = 0.00368256 Jy ! Total flux subtracted in 200 components = 0.00368256 Jy ! Clean residual min=-0.001722 max=0.001963 Jy/beam ! Clean residual mean=-0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.156239 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.156239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062997Jy sigma=0.000898 ! Fit after self-cal, rms=0.062982Jy sigma=0.000898 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062982Jy sigma=0.000898 ! Fit after self-cal, rms=0.063180Jy sigma=0.000898 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.209 mas, bmaj=9.786 mas, bpa=10.22 degrees ! Estimated noise=572.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015113 Jy ! Component: 100 - total flux cleaned = 0.00212929 Jy ! Component: 150 - total flux cleaned = 0.00220631 Jy ! Component: 200 - total flux cleaned = 0.00231657 Jy ! Total flux subtracted in 200 components = 0.00231657 Jy ! Clean residual min=-0.001406 max=0.001649 Jy/beam ! Clean residual mean=-0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.158556 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 127 components and 0.158556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063166Jy sigma=0.000897 ! Fit after self-cal, rms=0.063171Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000378725 Jy ! Component: 100 - total flux cleaned = 0.000510352 Jy ! Component: 150 - total flux cleaned = 0.000529686 Jy ! Component: 200 - total flux cleaned = 0.000511432 Jy ! Total flux subtracted in 200 components = 0.000511432 Jy ! Clean residual min=-0.001242 max=0.001365 Jy/beam ! Clean residual mean=-0.000000 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.159067 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 133 components and 0.159067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063164Jy sigma=0.000897 ! Fit after self-cal, rms=0.063160Jy sigma=0.000897 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.094 mas, bmaj=5.357 mas, bpa=6.335 degrees ! Estimated noise=492.836 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.094 x 5.357 at 6.335 degrees (North through East) ! Clean map min=-0.0014925 max=0.10111 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.441 mas, bmaj=4.579 mas, bpa=4.725 degrees ! Estimated noise=690.221 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0776456 Jy ! Component: 100 - total flux cleaned = 0.103365 Jy ! Component: 150 - total flux cleaned = 0.115508 Jy ! Component: 200 - total flux cleaned = 0.123024 Jy ! Total flux subtracted in 200 components = 0.123024 Jy ! Clean residual min=-0.004682 max=0.005142 Jy/beam ! Clean residual mean=0.000001 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.123024 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.123024 Jy ! Inverting map and beam ! Estimated beam: bmin=4.094 mas, bmaj=5.357 mas, bpa=6.335 degrees ! Estimated noise=492.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0076927 Jy ! Component: 100 - total flux cleaned = 0.013404 Jy ! Component: 150 - total flux cleaned = 0.0177494 Jy ! Component: 200 - total flux cleaned = 0.0211207 Jy ! Total flux subtracted in 200 components = 0.0211207 Jy ! Clean residual min=-0.002549 max=0.002960 Jy/beam ! Clean residual mean=0.000002 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.144144 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 58 components and 0.144144 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.209 mas, bmaj=9.786 mas, bpa=10.22 degrees ! Estimated noise=572.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00422566 Jy ! Component: 100 - total flux cleaned = 0.00694153 Jy ! Component: 150 - total flux cleaned = 0.00880856 Jy ! Component: 200 - total flux cleaned = 0.0101723 Jy ! Total flux subtracted in 200 components = 0.0101723 Jy ! Clean residual min=-0.001733 max=0.001687 Jy/beam ! Clean residual mean=0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.154317 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000603268 Jy ! Component: 100 - total flux cleaned = 0.00104433 Jy ! Component: 150 - total flux cleaned = 0.0014023 Jy ! Component: 200 - total flux cleaned = 0.00174899 Jy ! Total flux subtracted in 200 components = 0.00174899 Jy ! Clean residual min=-0.001371 max=0.001417 Jy/beam ! Clean residual mean=0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.156066 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 96 components and 0.156066 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.094 mas, bmaj=5.357 mas, bpa=6.335 degrees ! Estimated noise=492.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253966 Jy ! Component: 100 - total flux cleaned = -0.000303986 Jy ! Component: 150 - total flux cleaned = -0.000190758 Jy ! Component: 200 - total flux cleaned = -2.18844e-05 Jy ! Total flux subtracted in 200 components = -2.18844e-05 Jy ! Clean residual min=-0.001464 max=0.001753 Jy/beam ! Clean residual mean=0.000001 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.156044 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 0.156044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063186Jy sigma=0.000897 ! Fit after self-cal, rms=0.063174Jy sigma=0.000897 wmodel J0504+2802_S_2014_01_04_pus_map.mod ! Writing 113 model components to file: J0504+2802_S_2014_01_04_pus_map.mod wobs J0504+2802_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0504+2802_S_2014_01_04_pus_uvs.fits wwins J0504+2802_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0504+2802_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000577404 Jy ! Component: 100 - total flux cleaned = 0.000887134 Jy ! Component: 150 - total flux cleaned = 0.00103212 Jy ! Component: 200 - total flux cleaned = 0.0012155 Jy ! Component: 250 - total flux cleaned = 0.00136857 Jy ! Component: 300 - total flux cleaned = 0.0015157 Jy ! Component: 350 - total flux cleaned = 0.00159702 Jy ! Component: 400 - total flux cleaned = 0.00171581 Jy ! Component: 450 - total flux cleaned = 0.00181186 Jy ! Component: 500 - total flux cleaned = 0.00190488 Jy ! Component: 550 - total flux cleaned = 0.0019412 Jy ! Component: 600 - total flux cleaned = 0.00197651 Jy ! Component: 650 - total flux cleaned = 0.00197661 Jy ! Component: 700 - total flux cleaned = 0.00200979 Jy ! Component: 750 - total flux cleaned = 0.00204253 Jy ! Component: 800 - total flux cleaned = 0.00207421 Jy ! Component: 850 - total flux cleaned = 0.00207427 Jy ! Component: 900 - total flux cleaned = 0.00215068 Jy ! Component: 950 - total flux cleaned = 0.00225479 Jy ! Component: 1000 - total flux cleaned = 0.00229818 Jy ! Component: 1050 - total flux cleaned = 0.00239807 Jy ! Component: 1100 - total flux cleaned = 0.00241185 Jy ! Component: 1150 - total flux cleaned = 0.00242576 Jy ! Component: 1200 - total flux cleaned = 0.00243949 Jy ! Component: 1250 - total flux cleaned = 0.00249253 Jy ! Component: 1300 - total flux cleaned = 0.00251872 Jy ! Component: 1350 - total flux cleaned = 0.00254453 Jy ! Component: 1400 - total flux cleaned = 0.00262091 Jy ! Component: 1450 - total flux cleaned = 0.00263335 Jy ! Component: 1500 - total flux cleaned = 0.0026951 Jy ! Component: 1550 - total flux cleaned = 0.00273145 Jy ! Component: 1600 - total flux cleaned = 0.00276742 Jy ! Component: 1650 - total flux cleaned = 0.00281483 Jy ! Component: 1700 - total flux cleaned = 0.00286135 Jy ! Component: 1750 - total flux cleaned = 0.00290737 Jy ! Component: 1800 - total flux cleaned = 0.00293021 Jy ! Component: 1850 - total flux cleaned = 0.00295274 Jy ! Component: 1900 - total flux cleaned = 0.00300827 Jy ! Component: 1950 - total flux cleaned = 0.00304121 Jy ! Component: 2000 - total flux cleaned = 0.00310634 Jy ! Component: 2050 - total flux cleaned = 0.0031278 Jy ! Component: 2100 - total flux cleaned = 0.00317043 Jy ! Component: 2150 - total flux cleaned = 0.00320221 Jy ! Component: 2200 - total flux cleaned = 0.00322311 Jy ! Component: 2250 - total flux cleaned = 0.00326451 Jy ! Component: 2300 - total flux cleaned = 0.00329528 Jy ! Component: 2350 - total flux cleaned = 0.00333586 Jy ! Component: 2400 - total flux cleaned = 0.00334588 Jy ! Component: 2450 - total flux cleaned = 0.00335597 Jy ! Component: 2500 - total flux cleaned = 0.00342488 Jy ! Component: 2550 - total flux cleaned = 0.0034248 Jy ! Component: 2600 - total flux cleaned = 0.00345372 Jy ! Component: 2650 - total flux cleaned = 0.00346337 Jy ! Component: 2700 - total flux cleaned = 0.00350154 Jy ! Component: 2750 - total flux cleaned = 0.00351103 Jy ! Component: 2800 - total flux cleaned = 0.00353914 Jy ! Component: 2850 - total flux cleaned = 0.00356701 Jy ! Component: 2900 - total flux cleaned = 0.00360385 Jy ! Component: 2950 - total flux cleaned = 0.00362202 Jy ! Component: 3000 - total flux cleaned = 0.0036493 Jy ! Component: 3050 - total flux cleaned = 0.00367624 Jy ! Component: 3100 - total flux cleaned = 0.00369408 Jy ! Component: 3150 - total flux cleaned = 0.00369399 Jy ! Component: 3200 - total flux cleaned = 0.00366741 Jy ! Component: 3250 - total flux cleaned = 0.00364985 Jy ! Component: 3300 - total flux cleaned = 0.00366729 Jy ! Component: 3350 - total flux cleaned = 0.00364131 Jy ! Component: 3400 - total flux cleaned = 0.00364997 Jy ! Component: 3450 - total flux cleaned = 0.00364133 Jy ! Component: 3500 - total flux cleaned = 0.0036499 Jy ! Component: 3550 - total flux cleaned = 0.0036669 Jy ! Component: 3600 - total flux cleaned = 0.00368372 Jy ! Component: 3650 - total flux cleaned = 0.00371723 Jy ! Component: 3700 - total flux cleaned = 0.00369216 Jy ! Component: 3750 - total flux cleaned = 0.00372538 Jy ! Component: 3800 - total flux cleaned = 0.00375844 Jy ! Component: 3850 - total flux cleaned = 0.00378315 Jy ! Component: 3900 - total flux cleaned = 0.00381593 Jy ! Component: 3950 - total flux cleaned = 0.00384044 Jy ! Component: 4000 - total flux cleaned = 0.00385679 Jy ! Component: 4050 - total flux cleaned = 0.00388915 Jy ! Total flux subtracted in 4096 components = 0.00389721 Jy ! Clean residual min=-0.000447 max=0.000434 Jy/beam ! Clean residual mean=0.000001 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.159941 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 376 components and 0.159941 Jy ![Exited script file: muppet] wmap "J0504+2802_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.094 x 5.357 at 6.335 degrees (North through East) ! Clean map min=-0.0011503 max=0.10129 Jy/beam ! Writing clean map to FITS file: J0504+2802_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101286 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0001309 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.387715 0.387715 0.77543 1.55086 3.10172 6.20344 12.4069 24.8137 49.6275 99.255 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.094 x 5.357 at 6.335 degrees (North through East) ! Clean map min=-0.0011503 max=0.10129 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0504+2802_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:17:30 2017