! Started logfile: J0500+2651_S_2015_01_23_pus_uvs.log on Mon Jan 2 18:05:44 2017 obs J0500+2651_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J0500+2651_S_2015_01_23_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.787978 visibilities/baseline/integration-bin. ! Found source: J0500+2651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 17304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0500+2651_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951709Jy sigma=0.012475 ! Fit after self-cal, rms=0.930619Jy sigma=0.012229 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=5.332 mas, bpa=-1.939 degrees ! Estimated noise=792.623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05378 Jy ! Component: 100 - total flux cleaned = 0.0658341 Jy ! Total flux subtracted in 100 components = 0.0658341 Jy ! Clean residual min=-0.003795 max=0.004433 Jy/beam ! Clean residual mean=-0.000001 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.065834 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.065834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064884Jy sigma=0.000788 ! Fit after self-cal, rms=0.064873Jy sigma=0.000788 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=6.438 mas, bpa=-2.385 degrees ! Estimated noise=417.601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00494029 Jy ! Component: 100 - total flux cleaned = 0.0071643 Jy ! Component: 150 - total flux cleaned = 0.00834931 Jy ! Component: 200 - total flux cleaned = 0.00905529 Jy ! Total flux subtracted in 200 components = 0.00905529 Jy ! Clean residual min=-0.002223 max=0.003482 Jy/beam ! Clean residual mean=0.000002 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.0748893 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 30 components and 0.0748893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064409Jy sigma=0.000785 ! Fit after self-cal, rms=0.064412Jy sigma=0.000785 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.94 KP 1.07 ! LA 1.01 MK 1.00 NL 1.09 OV 0.94 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.98 KP 0.99 ! LA 0.98 MK 1.01 NL 1.29 OV 1.02 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.97 KP 0.89 ! LA 0.80 MK 1.03 NL 1.46 OV 0.94 ! PT 0.98 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00* HN 0.96 KP 0.82 ! LA 0.84 MK 1.02 NL 0.99 OV 0.96 ! PT 1.01 SC 1.03 ! ! ! Fit before self-cal, rms=0.064412Jy sigma=0.000785 ! Fit after self-cal, rms=0.062957Jy sigma=0.000774 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=6.484 mas, bpa=-2.407 degrees ! Estimated noise=419.103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000518682 Jy ! Component: 100 - total flux cleaned = 0.000645645 Jy ! Component: 150 - total flux cleaned = 0.000688035 Jy ! Component: 200 - total flux cleaned = 0.000717769 Jy ! Total flux subtracted in 200 components = 0.000717769 Jy ! Clean residual min=-0.001778 max=0.001457 Jy/beam ! Clean residual mean=0.000001 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0756071 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0756071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062951Jy sigma=0.000774 ! Fit after self-cal, rms=0.062963Jy sigma=0.000773 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062963Jy sigma=0.000773 ! Fit after self-cal, rms=0.062550Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=6.483 mas, bpa=-2.506 degrees ! Estimated noise=418.866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.21428e-05 Jy ! Component: 100 - total flux cleaned = 0.00010819 Jy ! Component: 150 - total flux cleaned = 0.000101465 Jy ! Component: 200 - total flux cleaned = 9.61539e-05 Jy ! Total flux subtracted in 200 components = 9.61539e-05 Jy ! Clean residual min=-0.001257 max=0.001143 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0757033 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.0757032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062548Jy sigma=0.000770 ! Fit after self-cal, rms=0.062561Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3196e-05 Jy ! Component: 100 - total flux cleaned = 1.50641e-06 Jy ! Component: 150 - total flux cleaned = -8.36403e-06 Jy ! Component: 200 - total flux cleaned = -3.78473e-06 Jy ! Total flux subtracted in 200 components = -3.78473e-06 Jy ! Clean residual min=-0.001265 max=0.001140 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0756995 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0756995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062559Jy sigma=0.000770 ! Fit after self-cal, rms=0.062560Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062560Jy sigma=0.000770 ! Fit after self-cal, rms=0.062594Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=6.491 mas, bpa=-2.532 degrees ! Estimated noise=419.082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.95551e-05 Jy ! Component: 100 - total flux cleaned = 8.34397e-05 Jy ! Component: 150 - total flux cleaned = 7.25384e-05 Jy ! Component: 200 - total flux cleaned = 7.24751e-05 Jy ! Total flux subtracted in 200 components = 7.24751e-05 Jy ! Clean residual min=-0.001280 max=0.001133 Jy/beam ! Clean residual mean=-0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0757719 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.075772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062593Jy sigma=0.000770 ! Fit after self-cal, rms=0.062594Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.15006e-05 Jy ! Component: 100 - total flux cleaned = -2.39478e-06 Jy ! Component: 150 - total flux cleaned = -2.39287e-06 Jy ! Component: 200 - total flux cleaned = -2.27403e-06 Jy ! Total flux subtracted in 200 components = -2.27403e-06 Jy ! Clean residual min=-0.001284 max=0.001130 Jy/beam ! Clean residual mean=-0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0757697 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.0757697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062593Jy sigma=0.000770 ! Fit after self-cal, rms=0.062593Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062593Jy sigma=0.000770 ! Fit after self-cal, rms=0.062600Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.842 mas, bmaj=9.968 mas, bpa=-3.381 degrees ! Estimated noise=528.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379771 Jy ! Component: 100 - total flux cleaned = 0.000421093 Jy ! Component: 150 - total flux cleaned = 0.000447353 Jy ! Component: 200 - total flux cleaned = 0.000469959 Jy ! Total flux subtracted in 200 components = 0.000469959 Jy ! Clean residual min=-0.001061 max=0.001271 Jy/beam ! Clean residual mean=0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0762396 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.0762396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062601Jy sigma=0.000770 ! Fit after self-cal, rms=0.062602Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.3496e-05 Jy ! Component: 100 - total flux cleaned = 4.83205e-05 Jy ! Component: 150 - total flux cleaned = 6.15953e-05 Jy ! Component: 200 - total flux cleaned = 6.57961e-05 Jy ! Total flux subtracted in 200 components = 6.57961e-05 Jy ! Clean residual min=-0.001066 max=0.001275 Jy/beam ! Clean residual mean=0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0763054 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0763054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062603Jy sigma=0.000770 ! Fit after self-cal, rms=0.062603Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=6.497 mas, bpa=-2.548 degrees ! Estimated noise=419.233 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 6.497 at -2.548 degrees (North through East) ! Clean map min=-0.0012332 max=0.070028 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=5.406 mas, bpa=-2.24 degrees ! Estimated noise=795.906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539241 Jy ! Component: 100 - total flux cleaned = 0.0659923 Jy ! Component: 150 - total flux cleaned = 0.0705076 Jy ! Component: 200 - total flux cleaned = 0.0728345 Jy ! Total flux subtracted in 200 components = 0.0728345 Jy ! Clean residual min=-0.002606 max=0.002626 Jy/beam ! Clean residual mean=-0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0728345 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0728345 Jy ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=6.497 mas, bpa=-2.548 degrees ! Estimated noise=419.233 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142138 Jy ! Component: 100 - total flux cleaned = 0.00212181 Jy ! Component: 150 - total flux cleaned = 0.00252551 Jy ! Component: 200 - total flux cleaned = 0.00270771 Jy ! Total flux subtracted in 200 components = 0.00270771 Jy ! Clean residual min=-0.001282 max=0.001139 Jy/beam ! Clean residual mean=-0.000000 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0755422 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 27 components and 0.0755422 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.842 mas, bmaj=9.968 mas, bpa=-3.381 degrees ! Estimated noise=528.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479447 Jy ! Component: 100 - total flux cleaned = 0.000604474 Jy ! Component: 150 - total flux cleaned = 0.000641854 Jy ! Component: 200 - total flux cleaned = 0.000667336 Jy ! Total flux subtracted in 200 components = 0.000667336 Jy ! Clean residual min=-0.001057 max=0.001268 Jy/beam ! Clean residual mean=0.000000 rms=0.000311 Jy/beam ! Combined flux in latest and established models = 0.0762095 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23113e-05 Jy ! Component: 100 - total flux cleaned = 4.22133e-05 Jy ! Component: 150 - total flux cleaned = 5.98604e-05 Jy ! Component: 200 - total flux cleaned = 7.58246e-05 Jy ! Total flux subtracted in 200 components = 7.58246e-05 Jy ! Clean residual min=-0.001065 max=0.001274 Jy/beam ! Clean residual mean=0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0762853 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0762853 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=6.497 mas, bpa=-2.548 degrees ! Estimated noise=419.233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177921 Jy ! Component: 100 - total flux cleaned = -0.000225634 Jy ! Component: 150 - total flux cleaned = -0.00026243 Jy ! Component: 200 - total flux cleaned = -0.000293293 Jy ! Total flux subtracted in 200 components = -0.000293293 Jy ! Clean residual min=-0.001288 max=0.001165 Jy/beam ! Clean residual mean=-0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.075992 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0759921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062605Jy sigma=0.000770 ! Fit after self-cal, rms=0.062603Jy sigma=0.000770 wmodel J0500+2651_S_2015_01_23_pus_map.mod ! Writing 45 model components to file: J0500+2651_S_2015_01_23_pus_map.mod wobs J0500+2651_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J0500+2651_S_2015_01_23_pus_uvs.fits wwins J0500+2651_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J0500+2651_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278535 Jy ! Component: 100 - total flux cleaned = -0.000320141 Jy ! Component: 150 - total flux cleaned = -0.000225632 Jy ! Component: 200 - total flux cleaned = -6.3271e-05 Jy ! Component: 250 - total flux cleaned = -1.14525e-05 Jy ! Component: 300 - total flux cleaned = 3.90331e-05 Jy ! Component: 350 - total flux cleaned = 0.000120915 Jy ! Component: 400 - total flux cleaned = 0.000185015 Jy ! Component: 450 - total flux cleaned = 0.000232255 Jy ! Component: 500 - total flux cleaned = 0.0003241 Jy ! Component: 550 - total flux cleaned = 0.00038416 Jy ! Component: 600 - total flux cleaned = 0.000413832 Jy ! Component: 650 - total flux cleaned = 0.000413763 Jy ! Component: 700 - total flux cleaned = 0.00042804 Jy ! Component: 750 - total flux cleaned = 0.000456053 Jy ! Component: 800 - total flux cleaned = 0.000469762 Jy ! Component: 850 - total flux cleaned = 0.000510317 Jy ! Component: 900 - total flux cleaned = 0.000550311 Jy ! Component: 950 - total flux cleaned = 0.000589603 Jy ! Component: 1000 - total flux cleaned = 0.000602431 Jy ! Component: 1050 - total flux cleaned = 0.000589903 Jy ! Component: 1100 - total flux cleaned = 0.000653023 Jy ! Component: 1150 - total flux cleaned = 0.00065313 Jy ! Component: 1200 - total flux cleaned = 0.000714558 Jy ! Component: 1250 - total flux cleaned = 0.000738817 Jy ! Component: 1300 - total flux cleaned = 0.00075068 Jy ! Component: 1350 - total flux cleaned = 0.000774256 Jy ! Component: 1400 - total flux cleaned = 0.000785826 Jy ! Component: 1450 - total flux cleaned = 0.000785874 Jy ! Component: 1500 - total flux cleaned = 0.000831515 Jy ! Component: 1550 - total flux cleaned = 0.000853977 Jy ! Component: 1600 - total flux cleaned = 0.000842853 Jy ! Component: 1650 - total flux cleaned = 0.000854034 Jy ! Component: 1700 - total flux cleaned = 0.000854092 Jy ! Component: 1750 - total flux cleaned = 0.000864856 Jy ! Component: 1800 - total flux cleaned = 0.000853995 Jy ! Component: 1850 - total flux cleaned = 0.000853913 Jy ! Component: 1900 - total flux cleaned = 0.000853844 Jy ! Component: 1950 - total flux cleaned = 0.000864211 Jy ! Component: 2000 - total flux cleaned = 0.000822954 Jy ! Component: 2050 - total flux cleaned = 0.000853594 Jy ! Component: 2100 - total flux cleaned = 0.000792852 Jy ! Component: 2150 - total flux cleaned = 0.000822877 Jy ! Component: 2200 - total flux cleaned = 0.00080297 Jy ! Component: 2250 - total flux cleaned = 0.00081282 Jy ! Component: 2300 - total flux cleaned = 0.000822543 Jy ! Component: 2350 - total flux cleaned = 0.000773925 Jy ! Component: 2400 - total flux cleaned = 0.000802764 Jy ! Component: 2450 - total flux cleaned = 0.000764674 Jy ! Component: 2500 - total flux cleaned = 0.000811948 Jy ! Component: 2550 - total flux cleaned = 0.000746292 Jy ! Component: 2600 - total flux cleaned = 0.000737093 Jy ! Component: 2650 - total flux cleaned = 0.000764802 Jy ! Component: 2700 - total flux cleaned = 0.000746414 Jy ! Component: 2750 - total flux cleaned = 0.00074636 Jy ! Component: 2800 - total flux cleaned = 0.000728337 Jy ! Component: 2850 - total flux cleaned = 0.000737347 Jy ! Component: 2900 - total flux cleaned = 0.000719599 Jy ! Component: 2950 - total flux cleaned = 0.000701937 Jy ! Component: 3000 - total flux cleaned = 0.00071939 Jy ! Component: 3050 - total flux cleaned = 0.000684582 Jy ! Component: 3100 - total flux cleaned = 0.000684541 Jy ! Component: 3150 - total flux cleaned = 0.000684456 Jy ! Component: 3200 - total flux cleaned = 0.000684346 Jy ! Component: 3250 - total flux cleaned = 0.000675895 Jy ! Component: 3300 - total flux cleaned = 0.000659112 Jy ! Component: 3350 - total flux cleaned = 0.000650803 Jy ! Component: 3400 - total flux cleaned = 0.000642618 Jy ! Component: 3450 - total flux cleaned = 0.000658868 Jy ! Component: 3500 - total flux cleaned = 0.000650698 Jy ! Component: 3550 - total flux cleaned = 0.000658756 Jy ! Component: 3600 - total flux cleaned = 0.000642593 Jy ! Component: 3650 - total flux cleaned = 0.000586771 Jy ! Component: 3700 - total flux cleaned = 0.000594705 Jy ! Component: 3750 - total flux cleaned = 0.000626124 Jy ! Component: 3800 - total flux cleaned = 0.000571589 Jy ! Component: 3850 - total flux cleaned = 0.00058714 Jy ! Component: 3900 - total flux cleaned = 0.000564038 Jy ! Component: 3950 - total flux cleaned = 0.000533494 Jy ! Component: 4000 - total flux cleaned = 0.00054118 Jy ! Component: 4050 - total flux cleaned = 0.000548743 Jy ! Total flux subtracted in 4096 components = 0.000526217 Jy ! Clean residual min=-0.000491 max=0.000391 Jy/beam ! Clean residual mean=-0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.0765183 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 322 components and 0.0765182 Jy ![Exited script file: muppet] wmap "J0500+2651_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 6.497 at -2.548 degrees (North through East) ! Clean map min=-0.0011754 max=0.070024 Jy/beam ! Writing clean map to FITS file: J0500+2651_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0700236 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000132818 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.569027 0.569027 1.13805 2.27611 4.55222 9.10443 18.2089 36.4177 72.8355 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.28 x 6.497 at -2.548 degrees (North through East) ! Clean map min=-0.0011754 max=0.070024 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0500+2651_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 18:05:49 2017