! Started logfile: J0450+2249_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:17:17 2017 obs J0450+2249_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0450+2249_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J0450+2249 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0450+2249_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.860776Jy sigma=0.013207 ! Fit after self-cal, rms=0.854268Jy sigma=0.013097 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=4.822 mas, bpa=10.49 degrees ! Estimated noise=1087.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111776 Jy ! Component: 100 - total flux cleaned = 0.136263 Jy ! Total flux subtracted in 100 components = 0.136263 Jy ! Clean residual min=-0.006023 max=0.007618 Jy/beam ! Clean residual mean=0.000005 rms=0.001623 Jy/beam ! Combined flux in latest and established models = 0.136263 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.136263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070899Jy sigma=0.000947 ! Fit after self-cal, rms=0.070884Jy sigma=0.000947 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.043 mas, bmaj=5.563 mas, bpa=3.464 degrees ! Estimated noise=740.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976516 Jy ! Component: 100 - total flux cleaned = 0.0150902 Jy ! Component: 150 - total flux cleaned = 0.0185298 Jy ! Component: 200 - total flux cleaned = 0.0207571 Jy ! Total flux subtracted in 200 components = 0.0207571 Jy ! Clean residual min=-0.004584 max=0.005369 Jy/beam ! Clean residual mean=-0.000006 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.157021 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.157021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069092Jy sigma=0.000931 ! Fit after self-cal, rms=0.069108Jy sigma=0.000930 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* KP 1.00* LA 1.01 ! MK 1.00 NL 0.94 OV 0.97 PT 0.99 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.00* KP 1.00* LA 1.04 ! MK 0.95 NL 1.01 OV 0.99 PT 0.94 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* KP 1.00* LA 0.80 ! MK 0.99 NL 1.00 OV 0.94 PT 0.97 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.91 ! MK 1.07 NL 1.07 OV 0.98 PT 0.99 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.069108Jy sigma=0.000930 ! Fit after self-cal, rms=0.066451Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.059 mas, bmaj=5.636 mas, bpa=2.645 degrees ! Estimated noise=741.505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142685 Jy ! Component: 100 - total flux cleaned = -0.00165657 Jy ! Component: 150 - total flux cleaned = -0.0017515 Jy ! Component: 200 - total flux cleaned = -0.00183329 Jy ! Total flux subtracted in 200 components = -0.00183329 Jy ! Clean residual min=-0.002706 max=0.002534 Jy/beam ! Clean residual mean=-0.000001 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.155187 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.155187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066347Jy sigma=0.000903 ! Fit after self-cal, rms=0.066119Jy sigma=0.000902 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066119Jy sigma=0.000902 ! Fit after self-cal, rms=0.066610Jy sigma=0.000900 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=5.611 mas, bpa=2.082 degrees ! Estimated noise=741.422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000477338 Jy ! Component: 100 - total flux cleaned = -0.000627827 Jy ! Component: 150 - total flux cleaned = -0.000721369 Jy ! Component: 200 - total flux cleaned = -0.000802335 Jy ! Total flux subtracted in 200 components = -0.000802335 Jy ! Clean residual min=-0.002409 max=0.002440 Jy/beam ! Clean residual mean=-0.000009 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.154385 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 33 components and 0.154385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066592Jy sigma=0.000900 ! Fit after self-cal, rms=0.066582Jy sigma=0.000900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.51587e-05 Jy ! Component: 100 - total flux cleaned = -0.000139777 Jy ! Component: 150 - total flux cleaned = -0.000178835 Jy ! Component: 200 - total flux cleaned = -0.000214794 Jy ! Total flux subtracted in 200 components = -0.000214794 Jy ! Clean residual min=-0.002417 max=0.002423 Jy/beam ! Clean residual mean=-0.000009 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.15417 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.15417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066573Jy sigma=0.000900 ! Fit after self-cal, rms=0.066572Jy sigma=0.000900 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066572Jy sigma=0.000900 ! Fit after self-cal, rms=0.066570Jy sigma=0.000900 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=5.607 mas, bpa=2.107 degrees ! Estimated noise=740.932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282316 Jy ! Component: 100 - total flux cleaned = -0.000368765 Jy ! Component: 150 - total flux cleaned = -0.000405477 Jy ! Component: 200 - total flux cleaned = -0.000428174 Jy ! Total flux subtracted in 200 components = -0.000428174 Jy ! Clean residual min=-0.002409 max=0.002423 Jy/beam ! Clean residual mean=-0.000009 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.153742 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.153742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066560Jy sigma=0.000899 ! Fit after self-cal, rms=0.066555Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107033 Jy ! Component: 100 - total flux cleaned = -0.000107339 Jy ! Component: 150 - total flux cleaned = -9.74563e-05 Jy ! Component: 200 - total flux cleaned = -0.000115816 Jy ! Total flux subtracted in 200 components = -0.000115816 Jy ! Clean residual min=-0.002403 max=0.002406 Jy/beam ! Clean residual mean=-0.000009 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.153626 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.153626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066550Jy sigma=0.000899 ! Fit after self-cal, rms=0.066550Jy sigma=0.000899 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066550Jy sigma=0.000899 ! Fit after self-cal, rms=0.066533Jy sigma=0.000899 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.284 mas, bmaj=9.938 mas, bpa=4.903 degrees ! Estimated noise=860.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649391 Jy ! Component: 100 - total flux cleaned = 0.000649169 Jy ! Component: 150 - total flux cleaned = 0.000648819 Jy ! Component: 200 - total flux cleaned = 0.00065807 Jy ! Total flux subtracted in 200 components = 0.00065807 Jy ! Clean residual min=-0.002454 max=0.002281 Jy/beam ! Clean residual mean=-0.000015 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.154284 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.154284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066546Jy sigma=0.000899 ! Fit after self-cal, rms=0.066540Jy sigma=0.000899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230527 Jy ! Component: 100 - total flux cleaned = 0.000231645 Jy ! Component: 150 - total flux cleaned = 0.000232125 Jy ! Component: 200 - total flux cleaned = 0.000232348 Jy ! Total flux subtracted in 200 components = 0.000232348 Jy ! Clean residual min=-0.002477 max=0.002289 Jy/beam ! Clean residual mean=-0.000015 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.154516 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 0.154516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066550Jy sigma=0.000900 ! Fit after self-cal, rms=0.066548Jy sigma=0.000899 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=5.602 mas, bpa=2.205 degrees ! Estimated noise=740.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.086 x 5.602 at 2.205 degrees (North through East) ! Clean map min=-0.0022726 max=0.14373 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.341 mas, bmaj=4.807 mas, bpa=9.128 degrees ! Estimated noise=1109.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113952 Jy ! Component: 100 - total flux cleaned = 0.139247 Jy ! Component: 150 - total flux cleaned = 0.145955 Jy ! Component: 200 - total flux cleaned = 0.149124 Jy ! Total flux subtracted in 200 components = 0.149124 Jy ! Clean residual min=-0.003645 max=0.003442 Jy/beam ! Clean residual mean=-0.000004 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.149124 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.149124 Jy ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=5.602 mas, bpa=2.205 degrees ! Estimated noise=740.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200933 Jy ! Component: 100 - total flux cleaned = 0.00227411 Jy ! Component: 150 - total flux cleaned = 0.00248839 Jy ! Component: 200 - total flux cleaned = 0.00262956 Jy ! Total flux subtracted in 200 components = 0.00262956 Jy ! Clean residual min=-0.002409 max=0.002598 Jy/beam ! Clean residual mean=-0.000008 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.151753 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 23 components and 0.151753 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.284 mas, bmaj=9.938 mas, bpa=4.903 degrees ! Estimated noise=860.024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115156 Jy ! Component: 100 - total flux cleaned = 0.00150117 Jy ! Component: 150 - total flux cleaned = 0.00158984 Jy ! Component: 200 - total flux cleaned = 0.00168301 Jy ! Total flux subtracted in 200 components = 0.00168301 Jy ! Clean residual min=-0.002531 max=0.002186 Jy/beam ! Clean residual mean=-0.000016 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.153436 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.71265e-05 Jy ! Component: 100 - total flux cleaned = 0.000110677 Jy ! Component: 150 - total flux cleaned = 0.000160565 Jy ! Component: 200 - total flux cleaned = 0.00020794 Jy ! Total flux subtracted in 200 components = 0.00020794 Jy ! Clean residual min=-0.002540 max=0.002176 Jy/beam ! Clean residual mean=-0.000015 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.153644 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.153644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.086 mas, bmaj=5.602 mas, bpa=2.205 degrees ! Estimated noise=740.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00085301 Jy ! Component: 100 - total flux cleaned = -0.000945358 Jy ! Component: 150 - total flux cleaned = -0.000984634 Jy ! Component: 200 - total flux cleaned = -0.00102026 Jy ! Total flux subtracted in 200 components = -0.00102026 Jy ! Clean residual min=-0.002399 max=0.002587 Jy/beam ! Clean residual mean=-0.000008 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.152624 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.152624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066569Jy sigma=0.000900 ! Fit after self-cal, rms=0.066567Jy sigma=0.000900 wmodel J0450+2249_S_2014_01_04_pus_map.mod ! Writing 34 model components to file: J0450+2249_S_2014_01_04_pus_map.mod wobs J0450+2249_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0450+2249_S_2014_01_04_pus_uvs.fits wwins J0450+2249_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J0450+2249_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203065 Jy ! Component: 100 - total flux cleaned = 0.000157164 Jy ! Component: 150 - total flux cleaned = 0.000421968 Jy ! Component: 200 - total flux cleaned = 0.00066965 Jy ! Component: 250 - total flux cleaned = 0.000936353 Jy ! Component: 300 - total flux cleaned = 0.00125199 Jy ! Component: 350 - total flux cleaned = 0.00149161 Jy ! Component: 400 - total flux cleaned = 0.00163503 Jy ! Component: 450 - total flux cleaned = 0.00177326 Jy ! Component: 500 - total flux cleaned = 0.00180073 Jy ! Component: 550 - total flux cleaned = 0.00187833 Jy ! Component: 600 - total flux cleaned = 0.00195348 Jy ! Component: 650 - total flux cleaned = 0.00197761 Jy ! Component: 700 - total flux cleaned = 0.00200107 Jy ! Component: 750 - total flux cleaned = 0.00200133 Jy ! Component: 800 - total flux cleaned = 0.00204648 Jy ! Component: 850 - total flux cleaned = 0.00211246 Jy ! Component: 900 - total flux cleaned = 0.00215521 Jy ! Component: 950 - total flux cleaned = 0.00219739 Jy ! Component: 1000 - total flux cleaned = 0.00221819 Jy ! Component: 1050 - total flux cleaned = 0.0022582 Jy ! Component: 1100 - total flux cleaned = 0.00231737 Jy ! Component: 1150 - total flux cleaned = 0.00235612 Jy ! Component: 1200 - total flux cleaned = 0.00244983 Jy ! Component: 1250 - total flux cleaned = 0.00252336 Jy ! Component: 1300 - total flux cleaned = 0.00254146 Jy ! Component: 1350 - total flux cleaned = 0.00255912 Jy ! Component: 1400 - total flux cleaned = 0.00254142 Jy ! Component: 1450 - total flux cleaned = 0.00250721 Jy ! Component: 1500 - total flux cleaned = 0.00252418 Jy ! Component: 1550 - total flux cleaned = 0.00250737 Jy ! Component: 1600 - total flux cleaned = 0.00250731 Jy ! Component: 1650 - total flux cleaned = 0.00249102 Jy ! Component: 1700 - total flux cleaned = 0.00245872 Jy ! Component: 1750 - total flux cleaned = 0.00244295 Jy ! Component: 1800 - total flux cleaned = 0.0024585 Jy ! Component: 1850 - total flux cleaned = 0.00244288 Jy ! Component: 1900 - total flux cleaned = 0.00247323 Jy ! Component: 1950 - total flux cleaned = 0.00242816 Jy ! Component: 2000 - total flux cleaned = 0.00241326 Jy ! Component: 2050 - total flux cleaned = 0.00241312 Jy ! Component: 2100 - total flux cleaned = 0.00241292 Jy ! Component: 2150 - total flux cleaned = 0.00239844 Jy ! Component: 2200 - total flux cleaned = 0.00241258 Jy ! Component: 2250 - total flux cleaned = 0.00241259 Jy ! Component: 2300 - total flux cleaned = 0.00245422 Jy ! Component: 2350 - total flux cleaned = 0.00246789 Jy ! Component: 2400 - total flux cleaned = 0.00250856 Jy ! Component: 2450 - total flux cleaned = 0.00256219 Jy ! Component: 2500 - total flux cleaned = 0.00257551 Jy ! Component: 2550 - total flux cleaned = 0.00260178 Jy ! Component: 2600 - total flux cleaned = 0.00258881 Jy ! Component: 2650 - total flux cleaned = 0.00261472 Jy ! Component: 2700 - total flux cleaned = 0.00266568 Jy ! Component: 2750 - total flux cleaned = 0.00274147 Jy ! Component: 2800 - total flux cleaned = 0.00275391 Jy ! Component: 2850 - total flux cleaned = 0.00282844 Jy ! Component: 2900 - total flux cleaned = 0.00284071 Jy ! Component: 2950 - total flux cleaned = 0.00287728 Jy ! Component: 3000 - total flux cleaned = 0.00282878 Jy ! Component: 3050 - total flux cleaned = 0.00281684 Jy ! Component: 3100 - total flux cleaned = 0.00280496 Jy ! Component: 3150 - total flux cleaned = 0.00280498 Jy ! Component: 3200 - total flux cleaned = 0.00278153 Jy ! Component: 3250 - total flux cleaned = 0.00279326 Jy ! Component: 3300 - total flux cleaned = 0.00280482 Jy ! Component: 3350 - total flux cleaned = 0.00274739 Jy ! Component: 3400 - total flux cleaned = 0.00278176 Jy ! Component: 3450 - total flux cleaned = 0.00274773 Jy ! Component: 3500 - total flux cleaned = 0.00271394 Jy ! Component: 3550 - total flux cleaned = 0.00270266 Jy ! Component: 3600 - total flux cleaned = 0.00266925 Jy ! Component: 3650 - total flux cleaned = 0.00263616 Jy ! Component: 3700 - total flux cleaned = 0.00261416 Jy ! Component: 3750 - total flux cleaned = 0.00260323 Jy ! Component: 3800 - total flux cleaned = 0.00254888 Jy ! Component: 3850 - total flux cleaned = 0.00252724 Jy ! Component: 3900 - total flux cleaned = 0.0024734 Jy ! Component: 3950 - total flux cleaned = 0.00247346 Jy ! Component: 4000 - total flux cleaned = 0.00245207 Jy ! Component: 4050 - total flux cleaned = 0.00242024 Jy ! Total flux subtracted in 4096 components = 0.0023991 Jy ! Clean residual min=-0.000700 max=0.000591 Jy/beam ! Clean residual mean=-0.000006 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.155023 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 272 components and 0.155023 Jy ![Exited script file: muppet] wmap "J0450+2249_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.086 x 5.602 at 2.205 degrees (North through East) ! Clean map min=-0.0015109 max=0.14467 Jy/beam ! Writing clean map to FITS file: J0450+2249_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.144673 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000173264 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.35929 0.35929 0.718579 1.43716 2.87432 5.74863 11.4973 22.9945 45.9891 91.9782 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.144 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.086 x 5.602 at 2.205 degrees (North through East) ! Clean map min=-0.0015109 max=0.14467 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0450+2249_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:17:21 2017