! Started logfile: /scr/pima/bg219i_uvs/J0448+1127_S_dfm.log on Thu May 19 23:03:07 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J0448+1127_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0448+1127_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0448+1127
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 8460 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0448+1127_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.007646Jy  sigma=25.089406
! Fit after  self-cal, rms=0.856489Jy  sigma=21.345880
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.714 mas, bmaj=6.561 mas, bpa=-3.737 degrees
! Estimated noise=0.42446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105775 Jy
! Component: 100  -  total flux cleaned = 0.146767 Jy
! Total flux subtracted in 100 components = 0.146767 Jy
! Clean residual min=-0.008000 max=0.021857 Jy/beam
! Clean residual mean=0.000020 rms=0.002634 Jy/beam
! Combined flux in latest and established models = 0.146767 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.146767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087019Jy  sigma=1.996748
! Fit after  self-cal, rms=0.086334Jy  sigma=1.982217
! Inverting map 
! Added new window around map position (3, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252064 Jy
! Component: 100  -  total flux cleaned = 0.039637 Jy
! Total flux subtracted in 100 components = 0.039637 Jy
! Clean residual min=-0.005362 max=0.010460 Jy/beam
! Clean residual mean=0.000016 rms=0.001669 Jy/beam
! Combined flux in latest and established models = 0.186404 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 27 components and 0.186404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076469Jy  sigma=1.734962
! Fit after  self-cal, rms=0.076190Jy  sigma=1.729216
! Inverting map 
! Added new window around map position (27, -6.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118792 Jy
! Component: 100  -  total flux cleaned = 0.0202989 Jy
! Total flux subtracted in 100 components = 0.0202989 Jy
! Clean residual min=-0.004544 max=0.007811 Jy/beam
! Clean residual mean=0.000015 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.206703 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 0.206703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073427Jy  sigma=1.661700
! Fit after  self-cal, rms=0.073320Jy  sigma=1.659833
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.307 mas, bmaj=7.289 mas, bpa=-4.295 degrees
! Estimated noise=0.316189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110651 Jy
! Component: 100  -  total flux cleaned = 0.0190124 Jy
! Component: 150  -  total flux cleaned = 0.0251165 Jy
! Component: 200  -  total flux cleaned = 0.0299944 Jy
! Total flux subtracted in 200 components = 0.0299944 Jy
! Clean residual min=-0.003585 max=0.004772 Jy/beam
! Clean residual mean=0.000020 rms=0.001102 Jy/beam
! Combined flux in latest and established models = 0.236697 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 81 components and 0.236697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070848Jy  sigma=1.601820
! Fit after  self-cal, rms=0.070734Jy  sigma=1.599512
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.307 x 7.289 at -4.295 degrees (North through East)
! Clean map  min=-0.0034545  max=0.1374 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.05     KP        0.99     
!   LA        0.96     MK        1.07     NL        0.97     OV        0.99     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.02     KP        0.97     
!   LA        0.92     MK        1.05     NL        0.98     OV        1.00     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.98     KP        0.97     
!   LA        0.95     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.00     KP        0.97     
!   LA        0.94     MK        1.00     NL        0.98     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070734Jy  sigma=1.599512
! Fit after  self-cal, rms=0.067151Jy  sigma=1.582863
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.348 mas, bmaj=7.355 mas, bpa=-4.083 degrees
! Estimated noise=0.311408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349917 Jy
! Component: 100  -  total flux cleaned = 0.00577376 Jy
! Component: 150  -  total flux cleaned = 0.00719393 Jy
! Component: 200  -  total flux cleaned = 0.00808099 Jy
! Total flux subtracted in 200 components = 0.00808099 Jy
! Clean residual min=-0.002580 max=0.003612 Jy/beam
! Clean residual mean=0.000014 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.244778 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 122 components and 0.244778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066905Jy  sigma=1.577454
! Fit after  self-cal, rms=0.066920Jy  sigma=1.576973
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066920Jy  sigma=1.576973
! Fit after  self-cal, rms=0.066589Jy  sigma=1.568825
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.342 mas, bmaj=7.323 mas, bpa=-4.187 degrees
! Estimated noise=0.311708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159617 Jy
! Component: 100  -  total flux cleaned = 0.00281962 Jy
! Component: 150  -  total flux cleaned = 0.00375768 Jy
! Component: 200  -  total flux cleaned = 0.00432171 Jy
! Total flux subtracted in 200 components = 0.00432171 Jy
! Clean residual min=-0.002275 max=0.002986 Jy/beam
! Clean residual mean=0.000008 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.2491 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 148 components and 0.2491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066521Jy  sigma=1.567441
! Fit after  self-cal, rms=0.066538Jy  sigma=1.567241
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (33, -7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285343 Jy
! Component: 100  -  total flux cleaned = 0.00386071 Jy
! Component: 150  -  total flux cleaned = 0.00460035 Jy
! Component: 200  -  total flux cleaned = 0.00524643 Jy
! Total flux subtracted in 200 components = 0.00524643 Jy
! Clean residual min=-0.002107 max=0.002666 Jy/beam
! Clean residual mean=0.000007 rms=0.000653 Jy/beam
! Combined flux in latest and established models = 0.254346 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 172 components and 0.254346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066384Jy  sigma=1.564199
! Fit after  self-cal, rms=0.066375Jy  sigma=1.563708
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066375Jy  sigma=1.563708
! Fit after  self-cal, rms=0.066124Jy  sigma=1.563382
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.313 mas, bpa=-4.059 degrees
! Estimated noise=0.311068 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00139832 Jy
! Component: 100  -  total flux cleaned = 0.002357 Jy
! Component: 150  -  total flux cleaned = 0.00300488 Jy
! Component: 200  -  total flux cleaned = 0.00345587 Jy
! Total flux subtracted in 200 components = 0.00345587 Jy
! Clean residual min=-0.002061 max=0.002683 Jy/beam
! Clean residual mean=0.000007 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.257802 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 182 components and 0.257802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066074Jy  sigma=1.562376
! Fit after  self-cal, rms=0.066077Jy  sigma=1.562264
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (87.5, 69.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246467 Jy
! Component: 100  -  total flux cleaned = 0.00380133 Jy
! Component: 150  -  total flux cleaned = 0.00463225 Jy
! Component: 200  -  total flux cleaned = 0.00521172 Jy
! Total flux subtracted in 200 components = 0.00521172 Jy
! Clean residual min=-0.001904 max=0.002142 Jy/beam
! Clean residual mean=0.000006 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.263014 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 205 components and 0.263014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065971Jy  sigma=1.559721
! Fit after  self-cal, rms=0.065973Jy  sigma=1.559520
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065973Jy  sigma=1.559520
! Fit after  self-cal, rms=0.065769Jy  sigma=1.559308
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.137 mas, bmaj=10.82 mas, bpa=-4.489 degrees
! Estimated noise=0.398136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182399 Jy
! Component: 100  -  total flux cleaned = 0.00320521 Jy
! Component: 150  -  total flux cleaned = 0.0043361 Jy
! Component: 200  -  total flux cleaned = 0.00528832 Jy
! Total flux subtracted in 200 components = 0.00528832 Jy
! Clean residual min=-0.002682 max=0.002850 Jy/beam
! Clean residual mean=0.000009 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.268303 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 243 components and 0.268302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065740Jy  sigma=1.558863
! Fit after  self-cal, rms=0.065749Jy  sigma=1.558753
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010106 Jy
! Component: 100  -  total flux cleaned = 0.00184755 Jy
! Component: 150  -  total flux cleaned = 0.00248342 Jy
! Component: 200  -  total flux cleaned = 0.00298574 Jy
! Total flux subtracted in 200 components = 0.00298574 Jy
! Clean residual min=-0.002710 max=0.002745 Jy/beam
! Clean residual mean=0.000008 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.271288 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 253 components and 0.271288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065739Jy  sigma=1.558661
! Fit after  self-cal, rms=0.065742Jy  sigma=1.558630
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.311 mas, bpa=-4.014 degrees
! Estimated noise=0.310999 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.339 x 7.311 at -4.014 degrees (North through East)
! Clean map  min=-0.0020725  max=0.13505 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.735 mas, bmaj=6.56 mas, bpa=-3.582 degrees
! Estimated noise=0.41953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105617 Jy
! Component: 100  -  total flux cleaned = 0.147753 Jy
! Component: 150  -  total flux cleaned = 0.170145 Jy
! Component: 200  -  total flux cleaned = 0.184758 Jy
! Total flux subtracted in 200 components = 0.184758 Jy
! Clean residual min=-0.004596 max=0.008514 Jy/beam
! Clean residual mean=0.000014 rms=0.001463 Jy/beam
! Combined flux in latest and established models = 0.184758 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.184758 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.311 mas, bpa=-4.014 degrees
! Estimated noise=0.310999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142227 Jy
! Component: 100  -  total flux cleaned = 0.0248008 Jy
! Component: 150  -  total flux cleaned = 0.032923 Jy
! Component: 200  -  total flux cleaned = 0.0392971 Jy
! Total flux subtracted in 200 components = 0.0392971 Jy
! Clean residual min=-0.003302 max=0.004340 Jy/beam
! Clean residual mean=0.000015 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.224055 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 55 components and 0.224055 Jy
! Inverting map 
! Added new window around map position (-3, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00529145 Jy
! Component: 100  -  total flux cleaned = 0.00966084 Jy
! Component: 150  -  total flux cleaned = 0.0133605 Jy
! Component: 200  -  total flux cleaned = 0.0165459 Jy
! Total flux subtracted in 200 components = 0.0165459 Jy
! Clean residual min=-0.002507 max=0.002851 Jy/beam
! Clean residual mean=0.000011 rms=0.000758 Jy/beam
! Combined flux in latest and established models = 0.2406 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 97 components and 0.240601 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.137 mas, bmaj=10.82 mas, bpa=-4.489 degrees
! Estimated noise=0.398136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00504332 Jy
! Component: 100  -  total flux cleaned = 0.00883643 Jy
! Component: 150  -  total flux cleaned = 0.011945 Jy
! Component: 200  -  total flux cleaned = 0.0145607 Jy
! Total flux subtracted in 200 components = 0.0145607 Jy
! Clean residual min=-0.002650 max=0.002943 Jy/beam
! Clean residual mean=0.000017 rms=0.001091 Jy/beam
! Combined flux in latest and established models = 0.255161 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00224968 Jy
! Component: 100  -  total flux cleaned = 0.00421344 Jy
! Component: 150  -  total flux cleaned = 0.00594142 Jy
! Component: 200  -  total flux cleaned = 0.00747003 Jy
! Total flux subtracted in 200 components = 0.00747003 Jy
! Clean residual min=-0.002694 max=0.002752 Jy/beam
! Clean residual mean=0.000013 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.262631 Jy
! Adding 144 model components to the UV plane model.
! The established model now contains 226 components and 0.262631 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.339 mas, bmaj=7.311 mas, bpa=-4.014 degrees
! Estimated noise=0.310999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142429 Jy
! Component: 100  -  total flux cleaned = 0.00236232 Jy
! Component: 150  -  total flux cleaned = 0.00302647 Jy
! Component: 200  -  total flux cleaned = 0.00366763 Jy
! Total flux subtracted in 200 components = 0.00366763 Jy
! Clean residual min=-0.002001 max=0.002017 Jy/beam
! Clean residual mean=0.000005 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.266299 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 259 components and 0.266299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065767Jy  sigma=1.559428
! Fit after  self-cal, rms=0.065746Jy  sigma=1.559026
wmodel /J0448+1127_S_map.mod
! wmodel: Unable to open new model file: /J0448+1127_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0448+1127_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.339 x 7.311 at -4.014 degrees (North through East)
! Clean map  min=-0.0019736  max=0.13521 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0448+1127_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.135213 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000549711 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.21966 1.21966 2.43931 4.87863 9.75725 19.5145 39.029 78.058
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.135 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  245.97 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0448+1127_S_dfm.log closed on Thu May 19 23:03:10 2016