! Started logfile: J0443+3441_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:17:12 2017 obs J0443+3441_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J0443+3441_S_2014_01_04_pus_uva.fits ! AN table 1: 104 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.347222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0443+3441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0443+3441_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.534628Jy sigma=0.008098 ! Fit after self-cal, rms=0.456290Jy sigma=0.006984 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=4.503 mas, bpa=-2.425 degrees ! Estimated noise=1166.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.407455 Jy ! Component: 100 - total flux cleaned = 0.49745 Jy ! Total flux subtracted in 100 components = 0.49745 Jy ! Clean residual min=-0.020645 max=0.034553 Jy/beam ! Clean residual mean=-0.000018 rms=0.006198 Jy/beam ! Combined flux in latest and established models = 0.49745 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.49745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130428Jy sigma=0.001636 ! Fit after self-cal, rms=0.130413Jy sigma=0.001636 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=5.865 mas, bpa=-4.937 degrees ! Estimated noise=718.057 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527678 Jy ! Component: 100 - total flux cleaned = 0.0807815 Jy ! Component: 150 - total flux cleaned = 0.0985773 Jy ! Component: 200 - total flux cleaned = 0.110684 Jy ! Total flux subtracted in 200 components = 0.110684 Jy ! Clean residual min=-0.016687 max=0.021854 Jy/beam ! Clean residual mean=-0.000017 rms=0.005053 Jy/beam ! Combined flux in latest and established models = 0.608134 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.608134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101474Jy sigma=0.001351 ! Fit after self-cal, rms=0.101420Jy sigma=0.001351 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* KP 1.00* LA 1.02 ! MK 1.05 NL 0.95 OV 0.97 PT 1.00 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* KP 1.00* LA 0.98 ! MK 1.05 NL 1.02 OV 1.00 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* KP 1.00* LA 0.81 ! MK 1.07 NL 0.97 OV 0.93 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* KP 1.00* LA 0.89 ! MK 1.09 NL 1.06 OV 0.99 PT 1.00 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.101420Jy sigma=0.001351 ! Fit after self-cal, rms=0.075891Jy sigma=0.000969 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.617 mas, bmaj=5.934 mas, bpa=-2.223 degrees ! Estimated noise=720.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000528285 Jy ! Component: 100 - total flux cleaned = -0.00112559 Jy ! Component: 150 - total flux cleaned = -0.00156122 Jy ! Component: 200 - total flux cleaned = -0.00194601 Jy ! Total flux subtracted in 200 components = -0.00194601 Jy ! Clean residual min=-0.005631 max=0.005982 Jy/beam ! Clean residual mean=0.000013 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.606188 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.606188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075643Jy sigma=0.000966 ! Fit after self-cal, rms=0.075325Jy sigma=0.000965 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075325Jy sigma=0.000965 ! Fit after self-cal, rms=0.075171Jy sigma=0.000959 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.606 mas, bmaj=5.936 mas, bpa=-3.361 degrees ! Estimated noise=720.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000722392 Jy ! Component: 100 - total flux cleaned = -0.000795882 Jy ! Component: 150 - total flux cleaned = -0.000925892 Jy ! Component: 200 - total flux cleaned = -0.000981159 Jy ! Total flux subtracted in 200 components = -0.000981159 Jy ! Clean residual min=-0.004918 max=0.004143 Jy/beam ! Clean residual mean=0.000000 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.605207 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 50 components and 0.605207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075012Jy sigma=0.000957 ! Fit after self-cal, rms=0.074975Jy sigma=0.000957 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121522 Jy ! Component: 100 - total flux cleaned = -0.000168559 Jy ! Component: 150 - total flux cleaned = -0.000305198 Jy ! Component: 200 - total flux cleaned = -0.000390955 Jy ! Total flux subtracted in 200 components = -0.000390955 Jy ! Clean residual min=-0.004352 max=0.004175 Jy/beam ! Clean residual mean=0.000000 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.604816 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.604816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074897Jy sigma=0.000956 ! Fit after self-cal, rms=0.074859Jy sigma=0.000955 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074859Jy sigma=0.000955 ! Fit after self-cal, rms=0.074768Jy sigma=0.000955 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.599 mas, bmaj=5.933 mas, bpa=-3.522 degrees ! Estimated noise=720.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127605 Jy ! Component: 100 - total flux cleaned = -0.000225893 Jy ! Component: 150 - total flux cleaned = -0.000268185 Jy ! Component: 200 - total flux cleaned = -0.000346483 Jy ! Total flux subtracted in 200 components = -0.000346483 Jy ! Clean residual min=-0.004019 max=0.003978 Jy/beam ! Clean residual mean=-0.000003 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.604469 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.604469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074695Jy sigma=0.000954 ! Fit after self-cal, rms=0.074656Jy sigma=0.000954 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130799 Jy ! Component: 100 - total flux cleaned = -0.000167909 Jy ! Component: 150 - total flux cleaned = -0.000267972 Jy ! Component: 200 - total flux cleaned = -0.000330199 Jy ! Total flux subtracted in 200 components = -0.000330199 Jy ! Clean residual min=-0.003650 max=0.003954 Jy/beam ! Clean residual mean=-0.000003 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.604139 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.604139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074614Jy sigma=0.000954 ! Fit after self-cal, rms=0.074584Jy sigma=0.000953 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074584Jy sigma=0.000953 ! Fit after self-cal, rms=0.074531Jy sigma=0.000953 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.217 mas, bmaj=9.739 mas, bpa=-0.1093 degrees ! Estimated noise=786.723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466811 Jy ! Component: 100 - total flux cleaned = 0.000558397 Jy ! Component: 150 - total flux cleaned = 0.000629941 Jy ! Component: 200 - total flux cleaned = 0.000668314 Jy ! Total flux subtracted in 200 components = 0.000668314 Jy ! Clean residual min=-0.002339 max=0.002661 Jy/beam ! Clean residual mean=-0.000006 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.604807 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 60 components and 0.604807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074529Jy sigma=0.000953 ! Fit after self-cal, rms=0.074473Jy sigma=0.000953 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.03293e-06 Jy ! Component: 100 - total flux cleaned = -8.93687e-06 Jy ! Component: 150 - total flux cleaned = 8.82428e-06 Jy ! Component: 200 - total flux cleaned = 3.98519e-05 Jy ! Total flux subtracted in 200 components = 3.98519e-05 Jy ! Clean residual min=-0.002337 max=0.002609 Jy/beam ! Clean residual mean=-0.000006 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.604847 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.604847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074482Jy sigma=0.000953 ! Fit after self-cal, rms=0.074441Jy sigma=0.000953 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.596 mas, bmaj=5.931 mas, bpa=-3.588 degrees ! Estimated noise=720.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.596 x 5.931 at -3.588 degrees (North through East) ! Clean map min=-0.0026991 max=0.5316 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074441Jy sigma=0.000953 ! Fit after self-cal, rms=0.064848Jy sigma=0.000764 ! Inverting map and beam ! Estimated beam: bmin=4.594 mas, bmaj=5.928 mas, bpa=-3.646 degrees ! Estimated noise=720.492 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144886 Jy ! Component: 100 - total flux cleaned = 0.00010948 Jy ! Component: 150 - total flux cleaned = 7.64226e-05 Jy ! Component: 200 - total flux cleaned = 2.09683e-05 Jy ! Total flux subtracted in 200 components = 2.09683e-05 Jy ! Clean residual min=-0.002788 max=0.003505 Jy/beam ! Clean residual mean=-0.000007 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.604868 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.604868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064800Jy sigma=0.000763 ! Fit after self-cal, rms=0.064776Jy sigma=0.000763 ! Inverting map ! Added new window around map position (-1, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000355042 Jy ! Component: 100 - total flux cleaned = 0.000587295 Jy ! Component: 150 - total flux cleaned = 0.00076447 Jy ! Component: 200 - total flux cleaned = 0.00101642 Jy ! Total flux subtracted in 200 components = 0.00101642 Jy ! Clean residual min=-0.002190 max=0.002314 Jy/beam ! Clean residual mean=-0.000005 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.605884 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 81 components and 0.605884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064542Jy sigma=0.000760 ! Fit after self-cal, rms=0.064536Jy sigma=0.000760 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064536Jy sigma=0.000760 ! Fit after self-cal, rms=0.064571Jy sigma=0.000759 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=4.512 mas, bpa=-1.426 degrees ! Estimated noise=1189.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.415419 Jy ! Component: 100 - total flux cleaned = 0.508661 Jy ! Component: 150 - total flux cleaned = 0.540063 Jy ! Component: 200 - total flux cleaned = 0.557686 Jy ! Total flux subtracted in 200 components = 0.557686 Jy ! Clean residual min=-0.007859 max=0.009585 Jy/beam ! Clean residual mean=-0.000016 rms=0.001995 Jy/beam ! Combined flux in latest and established models = 0.557686 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.557686 Jy ! Inverting map and beam ! Estimated beam: bmin=4.594 mas, bmaj=5.927 mas, bpa=-3.697 degrees ! Estimated noise=720.851 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171099 Jy ! Component: 100 - total flux cleaned = 0.0271579 Jy ! Component: 150 - total flux cleaned = 0.0338451 Jy ! Component: 200 - total flux cleaned = 0.0384523 Jy ! Total flux subtracted in 200 components = 0.0384523 Jy ! Clean residual min=-0.003543 max=0.004152 Jy/beam ! Clean residual mean=-0.000020 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.596138 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 69 components and 0.596138 Jy ! Inverting map ! Added new window around map position (-3, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410686 Jy ! Component: 100 - total flux cleaned = 0.00663454 Jy ! Component: 150 - total flux cleaned = 0.00822801 Jy ! Component: 200 - total flux cleaned = 0.00936726 Jy ! Total flux subtracted in 200 components = 0.00936726 Jy ! Clean residual min=-0.002195 max=0.002440 Jy/beam ! Clean residual mean=-0.000010 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.605505 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.605505 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.218 mas, bmaj=9.732 mas, bpa=-0.3564 degrees ! Estimated noise=787.928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166497 Jy ! Component: 100 - total flux cleaned = 0.0027414 Jy ! Component: 150 - total flux cleaned = 0.00320499 Jy ! Component: 200 - total flux cleaned = 0.00350863 Jy ! Total flux subtracted in 200 components = 0.00350863 Jy ! Clean residual min=-0.002072 max=0.002169 Jy/beam ! Clean residual mean=-0.000010 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.609014 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119861 Jy ! Component: 100 - total flux cleaned = 0.000246397 Jy ! Component: 150 - total flux cleaned = 0.000339877 Jy ! Component: 200 - total flux cleaned = 0.000389841 Jy ! Total flux subtracted in 200 components = 0.000389841 Jy ! Clean residual min=-0.001963 max=0.002127 Jy/beam ! Clean residual mean=-0.000009 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.609404 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 119 components and 0.609404 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.594 mas, bmaj=5.927 mas, bpa=-3.697 degrees ! Estimated noise=720.851 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000705916 Jy ! Component: 100 - total flux cleaned = -0.000873301 Jy ! Component: 150 - total flux cleaned = -0.000834853 Jy ! Component: 200 - total flux cleaned = -0.000798666 Jy ! Total flux subtracted in 200 components = -0.000798666 Jy ! Clean residual min=-0.001913 max=0.002198 Jy/beam ! Clean residual mean=-0.000006 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.608605 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 135 components and 0.608605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064481Jy sigma=0.000758 ! Fit after self-cal, rms=0.064469Jy sigma=0.000758 wmodel J0443+3441_S_2014_01_04_pus_map.mod ! Writing 135 model components to file: J0443+3441_S_2014_01_04_pus_map.mod wobs J0443+3441_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J0443+3441_S_2014_01_04_pus_uvs.fits wwins J0443+3441_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J0443+3441_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315625 Jy ! Component: 100 - total flux cleaned = 0.000583789 Jy ! Component: 150 - total flux cleaned = 0.000961081 Jy ! Component: 200 - total flux cleaned = 0.0013199 Jy ! Component: 250 - total flux cleaned = 0.00166347 Jy ! Component: 300 - total flux cleaned = 0.00202152 Jy ! Component: 350 - total flux cleaned = 0.0023402 Jy ! Component: 400 - total flux cleaned = 0.00249502 Jy ! Component: 450 - total flux cleaned = 0.00271989 Jy ! Component: 500 - total flux cleaned = 0.00286558 Jy ! Component: 550 - total flux cleaned = 0.00296039 Jy ! Component: 600 - total flux cleaned = 0.00307588 Jy ! Component: 650 - total flux cleaned = 0.00307619 Jy ! Component: 700 - total flux cleaned = 0.00307677 Jy ! Component: 750 - total flux cleaned = 0.00305567 Jy ! Component: 800 - total flux cleaned = 0.00305532 Jy ! Component: 850 - total flux cleaned = 0.00297235 Jy ! Component: 900 - total flux cleaned = 0.00297255 Jy ! Component: 950 - total flux cleaned = 0.00295255 Jy ! Component: 1000 - total flux cleaned = 0.00293313 Jy ! Component: 1050 - total flux cleaned = 0.00293343 Jy ! Component: 1100 - total flux cleaned = 0.00293334 Jy ! Component: 1150 - total flux cleaned = 0.00291463 Jy ! Component: 1200 - total flux cleaned = 0.0029333 Jy ! Component: 1250 - total flux cleaned = 0.00289713 Jy ! Component: 1300 - total flux cleaned = 0.00291546 Jy ! Component: 1350 - total flux cleaned = 0.00295061 Jy ! Component: 1400 - total flux cleaned = 0.00295071 Jy ! Component: 1450 - total flux cleaned = 0.00298493 Jy ! Component: 1500 - total flux cleaned = 0.0030017 Jy ! Component: 1550 - total flux cleaned = 0.00301843 Jy ! Component: 1600 - total flux cleaned = 0.00306786 Jy ! Component: 1650 - total flux cleaned = 0.00313267 Jy ! Component: 1700 - total flux cleaned = 0.00319669 Jy ! Component: 1750 - total flux cleaned = 0.00319662 Jy ! Component: 1800 - total flux cleaned = 0.00318111 Jy ! Component: 1850 - total flux cleaned = 0.0032276 Jy ! Component: 1900 - total flux cleaned = 0.00319682 Jy ! Component: 1950 - total flux cleaned = 0.00318171 Jy ! Component: 2000 - total flux cleaned = 0.003152 Jy ! Component: 2050 - total flux cleaned = 0.00316696 Jy ! Component: 2100 - total flux cleaned = 0.00315222 Jy ! Component: 2150 - total flux cleaned = 0.00315238 Jy ! Component: 2200 - total flux cleaned = 0.00315249 Jy ! Component: 2250 - total flux cleaned = 0.00315252 Jy ! Component: 2300 - total flux cleaned = 0.00312448 Jy ! Component: 2350 - total flux cleaned = 0.00316647 Jy ! Component: 2400 - total flux cleaned = 0.00319408 Jy ! Component: 2450 - total flux cleaned = 0.003194 Jy ! Component: 2500 - total flux cleaned = 0.00316698 Jy ! Component: 2550 - total flux cleaned = 0.0032073 Jy ! Component: 2600 - total flux cleaned = 0.00320723 Jy ! Component: 2650 - total flux cleaned = 0.00322042 Jy ! Component: 2700 - total flux cleaned = 0.0032205 Jy ! Component: 2750 - total flux cleaned = 0.00319458 Jy ! Component: 2800 - total flux cleaned = 0.00318169 Jy ! Component: 2850 - total flux cleaned = 0.00316901 Jy ! Component: 2900 - total flux cleaned = 0.00313083 Jy ! Component: 2950 - total flux cleaned = 0.00310571 Jy ! Component: 3000 - total flux cleaned = 0.00310568 Jy ! Component: 3050 - total flux cleaned = 0.00304336 Jy ! Component: 3100 - total flux cleaned = 0.00303101 Jy ! Component: 3150 - total flux cleaned = 0.00301873 Jy ! Component: 3200 - total flux cleaned = 0.00299437 Jy ! Component: 3250 - total flux cleaned = 0.00297016 Jy ! Component: 3300 - total flux cleaned = 0.00295822 Jy ! Component: 3350 - total flux cleaned = 0.0029582 Jy ! Component: 3400 - total flux cleaned = 0.00289864 Jy ! Component: 3450 - total flux cleaned = 0.00286316 Jy ! Component: 3500 - total flux cleaned = 0.00286315 Jy ! Component: 3550 - total flux cleaned = 0.00285145 Jy ! Component: 3600 - total flux cleaned = 0.00278149 Jy ! Component: 3650 - total flux cleaned = 0.0027816 Jy ! Component: 3700 - total flux cleaned = 0.00274692 Jy ! Component: 3750 - total flux cleaned = 0.0027239 Jy ! Component: 3800 - total flux cleaned = 0.00270097 Jy ! Component: 3850 - total flux cleaned = 0.00265524 Jy ! Component: 3900 - total flux cleaned = 0.00258693 Jy ! Component: 3950 - total flux cleaned = 0.00253025 Jy ! Component: 4000 - total flux cleaned = 0.00249627 Jy ! Component: 4050 - total flux cleaned = 0.00246242 Jy ! Total flux subtracted in 4096 components = 0.00241753 Jy ! Clean residual min=-0.000725 max=0.000768 Jy/beam ! Clean residual mean=-0.000002 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.611023 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 357 components and 0.611022 Jy ![Exited script file: muppet] wmap "J0443+3441_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.594 x 5.927 at -3.697 degrees (North through East) ! Clean map min=-0.0013839 max=0.53584 Jy/beam ! Writing clean map to FITS file: J0443+3441_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.535844 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000178228 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0997833 0.0997833 0.199567 0.399133 0.798267 1.59653 3.19307 6.38613 12.7723 25.5445 51.0891 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.535 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.594 x 5.927 at -3.697 degrees (North through East) ! Clean map min=-0.0013839 max=0.53584 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0443+3441_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:17:17 2017